Wow ! Neat work,good music I for the first time see the need for a two part mold to make a cylinder. Thank you .

@zrcarbon9937

Жыл бұрын

Hey Thanks so much! More good content is coming soon. 🛠🤘

That's pretty dope, a lot of work but all worth it in the end. I'm subscribe....got 2 gl1100 and you just opened the pandora box for me. Thank you!

@zrcarbon9937

3 жыл бұрын

Thanks so much!👊🏻 I’m planning to do a few crazy works with the “oldwing” . Stay tuned!🛠🏍🤟

sosem gondoltam vna, h igy keszul a carbon cso!😂😂 na jo, en is karbon buzi vagyok, igy mar lattam jo par videot. A panigale munkad is zsenialis, vagy egy kawam nekem is. Jo lenne par idom... mindig azt tervezem, h a telen neki allok - meg a sorfozesnek- aztan mire eszreveszem magam, mar tavasz van!

Hey! Great video. thx 🙏

@zrcarbon9937

3 жыл бұрын

Hey! Thanks so much!

Sweet!

@zrcarbon9937

3 жыл бұрын

Thanks man!

Very nice !

@zrcarbon9937

Жыл бұрын

Thanks so much! 🛠🤘

👍🏾 You've got me wanting to make some carbon fiber parts for my bike. 😂

@zrcarbon9937

2 жыл бұрын

Thanks man! Definitely give a try! I liked your videos. They are well made 🛠🏍🤟

Super ton travail

Very nice bud 🛠🛠👌🏻👌🏻

@zrcarbon9937

3 жыл бұрын

Thank you very much!

ZR - I know that rain sound. You're in Seattle!

what are the tubes for?

thanks mister, im lazy, l use bladder molds from piercan international, vista california.

Have you ever thought of making carbon fiber handlebars?

Are the copper(?) strips used as a gasket for resin seepage? Thanks..

@zrcarbon9937

2 жыл бұрын

Hey! Yes. I tried to seal the side gaps. Thanks

Nice, what prepreg do you use?

@zrcarbon9937

2 жыл бұрын

Thanks! I used 210g 2x2 twill 3k

@jasonsutterfield6968

Жыл бұрын

@@zrcarbon9937 What brand?

Are you using any kind of mould release agent ?

@zrcarbon9937

3 жыл бұрын

Yes, I used chemical release agent. You’ll see at 1:10 in the video. Thanks for watching!

Is it work when using wet lay method?

@zrcarbon9937

11 ай бұрын

Hey Yes it can work. But with the wet layup method will be a lot more difficult to make a tube shape. Maybe check this video to give you an idea about the whole process. kzread.info/dash/bejne/i4KL15Nmopiud9I.html 🛠️🤘

are you not worried about a resin matrix breakdown because of the coolant ?

@zrcarbon9937

Жыл бұрын

Hey Will see. Never tried it before. Can be possible it will wreck the whole engine or just the pipes. I would like to see the results 🛠🤘

@BeaHasPP

Жыл бұрын

​@@zrcarbon9937 true i looked into it and its unlikely to be a problem acidity is bad but coolant is normally alkaline / just getting acidic if its way bad so i think you will be fine.

The prepreg is rated for hot water temperatures I assume?

@zrcarbon9937

2 жыл бұрын

Yes 130c

I don’t understand it. Does the fiber not go all around the pipe? Then the strenght of that pipe will be the strenght of the epoxy only.

@zrcarbon9937

Жыл бұрын

Hey The cf is all the way around and the resin holding the layers together. It is heat resistant up to 130c. Thanks for watching 🛠🤘

Hấp bao nhiêu phút nhiệt độ bao nhiêu thế ad ? 👍

@zrcarbon9937

3 жыл бұрын

100C for 4h than 120C for 1h

@journeypandora5265

3 жыл бұрын

@@zrcarbon9937 🥰🥰🥰 tk

What the mold make from?

@zrcarbon9937

3 жыл бұрын

Hey, I put all the information about how I made the mould here kzread.info/dash/bejne/oISXxqltl8q8YrQ.html Thanks for watching 🛠🤟

We'll build!

@zrcarbon9937

3 жыл бұрын

Hey! Thanks so much!

@carbonarne675

3 жыл бұрын

@@zrcarbon9937 cutting the part did not look to good to me... Maybe check the curing cycle...? Is it fully cured? Give it some more time to cool down, cooldown delta temp is also important! To sand the ends flush use a block clamped to the bench and put the tube next to it and the sanding block vertical along the bench... Should be a simple streight sand down ;) Keep it up and keep your self challenging! (I gave my best but please correct my English if you can)

@zrcarbon9937

3 жыл бұрын

Thanks so much for your help! Keep making your videos, they are great! 🤟

@carbonarne675

3 жыл бұрын

@@zrcarbon9937 same to you!

Why not bake the carbon in the oven?

@zrcarbon9937

Жыл бұрын

Hey Yes, I did

What is cf polish

@zrcarbon9937

3 жыл бұрын

Hey! The polish I used (Easygloss carbon fiber polish & protect) is designed for carbon fibre or dark-finish composite parts to give a deeper contrast for your parts.

Material of moulds?

@zrcarbon9937

7 ай бұрын

Hey Will be a video out in a couple of weeks with the same materials I used in this video. I'll post everything up in the description, but I sourced most of the stuff from www.easycomposites.co.uk Thanks for watching 🛠🤟

No BGM is dood

az letezik, h vki beteges vonzalmat erez a kompozit anyag irant? Neha ezt veszem eszre magamon...😂😂😂

@zrcarbon9937

3 күн бұрын

Azzal nincsen semmi baj! Csak ne h eldurvuljon 😅🛠️🤘

@fanatikbitcoin5291

2 күн бұрын

@@zrcarbon9937 most megyek lefekszem, reggel koran kelek... mar azt hittem ennyi nap csend utan, hogy titok, hogy magyar vagy! : )))) orulok, h valaszoltal, annak meg plane, hogy ilyen kozel vagy. Carbon, sarga-fekete es kawa buzi vagyok... az jo vagy rossz? : ))))) ocsem, az a kemence az elektromos suto futesevel!!! es ahogy osszeraktad!!!! Azta kurva! eskuszom, ha taliznank, vinnek egy par dewalt kesztyut! : )))))))))