CAR NINJA! Playing CATCH UP plus F55 MINI Engine Mount SWAP
Автокөліктер мен көлік құралдары
With no parts deliveries last week due to winter storms customer cars have been stacking up waiting for repairs.
Parts finally arrived and now Jonny and the guys are playing catch up to get the cars serviced and gone as additional customer cars continue to arrive.
Jonny replaces an engine mount on a 2015 F55 Mini Cooper
Пікірлер: 144
I love how honest and straightforward johnny and his employees are. No drama just straightforward, honest people working on cars. Love what you guys do, look forward to every video
@kevingreen3923
2 жыл бұрын
@@PlastervilleProductions Agree 100%
BMW management to Mini design team, “We need you to put 5 kg of whole potatoes into a 2.5 kg bag. Let us know when you’re done. Thanks.”
Imagine how much business has come in since Tyler Hoover showed the world how good of a BMW mechanic car ninja is.
@bassheadlife492
2 жыл бұрын
I'm not sure, but it would be interesting to find out!
@Crazy8ts
2 жыл бұрын
Anyone workng on bmw's will always be endlesly busy with repairs.these are built to be 3 year trade ins from new. After that ? Constant repairs.
@insaneiaq
2 жыл бұрын
I'm sure he did more than fine before, but I personally didn't take my Audi until learning about the shop from watching Hoovie and JRGO.
@blaakrose
2 жыл бұрын
The car wizard has said in a video because of Tyler Hoover, he has a youtube channel and the business has grown so much today. In turn Jonny is also known globally because of Tyler Hoover. Tyler is also the reason Jonny has a youtube channel. Sure Jonny is an awesome mechanic. Tyler Hoover showed the world and now he gets cars shipped in like the car wizard does. Tyler Hoover has changed a lot of people's lives for the better. Multiple people have KZread channels because of him.
@nachobroryan8824
2 жыл бұрын
@@blaakrose Jeremy Clarkson gets all the credit.
He has a top attitude. Before and after ANY job he tackles, "No big deal."
It’s incredible how Jonny never loses his cool working on a Mini
@crazyman8472
2 жыл бұрын
7:30 “This is where the fun begins.” 😜
@cd9225
2 жыл бұрын
@@crazyman8472 Loses the eyeball.(Mini headlight)
@gueyg3764
2 жыл бұрын
Been wondering that too…
@stevemcrichards8768
2 жыл бұрын
ikr. When they say Mini they mean mini space because its all in a sardine tin.
@esco819
2 жыл бұрын
It's incredible how people still buy those cars lol
Love how there is no wasted movement as Jonny works. His tools go exactly where the bolts and clips are and go into motion immediately. It's almost like he's been there before. 😁
I really enjoy the attitude of all your employees. Everyone working together to complete the days tasks. As someone that runs a company I can say that is not an easy task to accomplish. Well done Ninja and your crew!
Jonny is my favourite car technician on youtube. Always gets to the point. Less talking, and more work. Most of all, he's a very humble guy, and never complains or is rude to his team!.👍👍👍💞
Bwahahaaha! "Johnnie: "The engineers did not have enough beers when they designed it." Car Ninja talking about the F55 Mini Cooper.
Can't imagine how much tougher this past week would've been for the team if they hadn't built the bigger parking lot!
Honestly this is much more entertaining to watch than the Car Wizard.
@alexcallas8222
2 жыл бұрын
You aren't entertained by his wife explaining the whole interior on every damn car they work on?
Great to see a shop showing us actual work being when you watch the car wizard shop he talks about what needs done but you never see any of it bring done the only time you seen work was when he was doing his boat
@mathewfullerton8577
2 жыл бұрын
Why I no longer am subbed to his channel. Between not showing any work and his constant (and unnecessary) touting of "how it's so great that Omega will do this work and do so correctly", I got bored and annoyed. Love this channel, Jonny and his crew!
@LetsWorkBmws
2 жыл бұрын
Yeah that channel is super boring and no to talk about all the junk that he talks about. Like i dont want no freaking car review, show me the work you doing
@philiprush5754
2 жыл бұрын
@@mathewfullerton8577 I have to agree it's all about the tools that you never see being used
@realcarninja
2 жыл бұрын
We appreciate the kind words. I would argue that Car Wizard is doing something right, their channel's viewership is quite large. At the end of the day, though....for Car Ninja, we just do our normal work and happen to record it and put it out there for people to see. For better or worse. That being said, we understand that we'll never have an audience the size of Car Wizard's, and we're ok with that...we're just happy that enough of you are interested in what we do for us to keep making videos. That's the only reason we keep doing it. Thanks again!
@philiprush5754
2 жыл бұрын
@@mathewfullerton8577 he's all about the tools on Amazon that you never see nobody using
I did a doubletake on the RS7... "man that thing sounds all cammed out, wtf" before realizing it was a misfire lol
@kerrylewis2581
2 жыл бұрын
Me too
I really appreciate the soft kick ass attitude that the Jonny supper dude exudes ...I am positive that you have told everyone in the world except me were you came from...I am first generation American and love it...Dad was from Berlin
Johny, we do the engine mounts on the minis, X1s and X2s with the B46 by removing the right front wheel arch liners, and pulling it through from the bottom. Takes practice, but well worth it. No need to crack A/C lines, or touch the hood latch assembly/crossmembers. This repair is becoming more and more common unfortunately
@ameshjohn
2 жыл бұрын
I remove the headlight to to take out the mount and still no need to remove ac lines
@JDN-ii1td
2 жыл бұрын
@@ameshjohn This is how I do it as well. Heat the headlight bolts before removal so the nut doesn't spin on you and the rest of the job is str8 gravy.
“Next one” Cha Ching. Ninja is beast. He seems very talented. Also seems to enjoy what he does. Every town needs a Ninja mechanic.💪
"I guess the engineers didn't have enough beer when they designed it." Lol! 😂
A day at the shop, Rock N Roll getting things done. Well done guys.
Jonny is a genius getting into these german cars...Super expensive to fix and even the newer-ish ones (like that AUDI RS7) break fairly often....He has mastered the art, and passed it down to his other techs...What a business model! Find the most expensive vehicles, that have constant issues and MASTER them....CHA-CHING! Shout out to Ninja, Mike and the squad!
Jonny, I enjoy your videos
The boss mechanic at work always hands on .
car ninja is a top .1% of mechanic in skill. unmatched and i like my ninja t shirt
When the Ninja says it's going to be a gigantic pain...oh no!
Great content, like an over the shoulder in a mechanics shop while they work.
"No big deal" Love it!
2008 Audi RS4 Cabriolet - good times! Owned one in Misano Red with Gray interior, which is better than a black interior when the top goes down and the sun is shining down all day while carving through canyon roads. That's what that car did best. It wasn't the most spirited off the line with only 318 ft-lb TQ from the 4.2 V8, despite the 6-spd manual, unless I wanted to beat-up the clutch.
You'd tell anybody that your have to remove the engine mount by the headlight hole and they won't believe you. Great engineering, Mini...
Love the videos, but I wish they were longer. 10 minutes goes by quick!
First one to like :-) Keep up the good work guys, hello from Germany :-)
Fantastic, such a pleasure to watch! What great guys :)
Love the channel. I have a Audi A5 coupe, I would like it if Johnny looked it over one day. Just bought it. Love to see the shop one day.
@webfreakz
2 жыл бұрын
Bring it to him then
Good to see you're busy. More videos for us hopefully.
Loved seeing what you’ll have been doing!!
that RS4 convertible sure is sexy
Excellent show!
Nice to see all the action for you!
Johnny the motor mount on the F55 can be snuck out without recovering the a/c if you unclip the white plastic holder off the mount and carefully pull it away without breaking it, as for the headlight It looked like you didn't take it out all the way because of the stupidly held in nut, in the future what I do is I hit the bolts with a torch lighter for a few seconds and that degrades the factory loctite and makes the bolt a lot easier to spin out- impact drivers are the worst on them. Hope this helps you in the future, we do one at least once a week over here, sometimes two or three and sometimes we're all fighting for the last one in stock.
imagine having to work on minis all day long. johnny would lose his mind
@Car Ninja The trick to those MINI upper engine mounts is to heat up the back of the headlight bolts. This will allow you to remove the headlight almost every time with no problem (without the nut spinning on you). From there the mount is a piece of cake.
Longer videos johnny.saludos
Man, that RS7 is dope! Such a distinctive look
Jonny, you are AWESOME LONGER videos /information would be much appreciated thank you from CANADA/ONTARIO.
Good shop.. good people
Amazing 😎
Pls make a ''Engineers did not have enouth beer when designing it'' t-shirt :D
Business is booming!
I had a F55 for a few years, and not that it was problematic at all (though I spec'd it w the nicest interior of any car I've owned) but I can honestly say I don't miss it much at all.
Little tip for Johnny. Those red locktitle holding the headlight no need to touch them. Drop the engine all the way down .and no need to touch the AC system on the mini.for BMW engine mount .turn the mount and you can get it out. Three cylinder mini are really easy to come out. Four cylinder mini a little harder to get out. BMW one just take the fender liner out .never touch those headlight usually can get down 1hour . warranty paid 2 .customer paid 5
Watching skilled mechanics work is therapeutic. Have you seen Sretan over at M539 Restorations? He's another one who does excellent work on BMWs.
@ville85
2 жыл бұрын
Have you watched Jamie's Garage (previously On the fast lane with Jamie)?
That white Audi is beautiful 😍
Good video
Johnny needs to hire more mechanics and expand his shop. With the number of beemers on US roads, his business has no way to go but up.
I enjoy watching you work on some very difficult and expensive cars and make it look almost routine . My question is why do I never so far see your shop use fender covers ?
Hey Jonny!!!!
Johnnie is the German wizard
Business is good.
👍👍
We do so many of those mini/bmw engine mounts we can do them in like an hour, you gotta take the wheel off and fender liner and it slides right out
@LetsWorkBmws
2 жыл бұрын
You can do those without doing any of that. Just in the headlights and boom . Takes me 25 minutes but because i mastered at the dealership
On my early Mini, you had to take out the radiator, to change the water pump
I laugh at my friend's MINI repair stories, every time it needed a part replaced always took a few days and cost zillion. On they forth major service they got the engine out and replaced everything, alternator, belt, belt tensioner, air con compressor, dryer, expansion valve, engine mounts, clutch, front and back engine seals, valves cover gasket, and on and on. Why he did all this, it is his better half car. HaHa!
on those mini's it's 11 hours shop time to change the clutch, you need to remove the whole front of the car including fenders to get to it.
I’m not looking forward to doing the upper engine mount on my F56 JCW. Love the car though lol
👍
Imagine how many Ninjas have claimed Car Ninja Johnny as their "Ninja"
Internet Gold.
Need more Ben time!
Car 🥷, Question .. what would cause a vibration in drive after all motor mounts have been replaced ?
I cant believe jonny used to do this himself
Johny do you like it when people tune them ? What’s you’re opinion on that
BMW= Bringing Mechanics Work. 🤣🤣🤣🤣
God…I have to change the same mount on my Mini (suggested to remove the headlight for easy access tho). I hate it’s a “common failure” almost as a maintenance item (just like the water pumps on VAGs).
you dont need to remove the intake to do the thermostat housing on the audi TFSI.
On the F56 that mounts sooo easy I was glad to be able to do it in 15-20 min. But now my car wants to stall out and put out less power not sure whats up its the S All4 2017. I have 144,000 on it. Been a great car I just did plugs and 2 more coils. I got a new waste gate in and same issue. I have no idea whats going on other than now I don’t smell exhaust. No codes are coming up.
Who loctites a headlight?! HAHA
Jonny the 🇦🇱 king
Was the C7 S6 Avant sold in North America.
Was it the coils on the rs7 or something else
Did I see a promotion for Jon to foreman?!
What scanner do u all use in the shop?
Yeah no need for the ac lines on that mount. Just headlight out and snake it out/in from there.
minis are not worth the headaches, no surprise why they don't sell many of them
Anybody here that can help me with my E90 with N55. I replaced my engine recently and it has had issues like a failed pcv valve and bad injector. Now my latest issue is that when I put the car in gear it stalls? It does this once then drives just fine like no issues. I had a bad pcv valve and that has helped with an idle issue but i am stumped with the engine stalling. it’s a 2011 335i with n55 and automatic trans. Any advice would be appreciated.
When a guy who has worked on European cars his whole life hates a job then you KNOW its a bad one lol
More videos please
Never ever had an engine mount fail until I bought a BMW. Or since I sold the BMW.
First class work ,BMW Mini designed by the devil a real poor design 👍👨🏻🏭🇬🇧
Who uses Loctite on a headlamp screw/bolt.
I loved Mini Coopers until it broke down and found out what a pain it was to fix
Who got the cleanest shop the Ninja
I hate replacing engine mounts.
Hey Johnny where are you from man
I wonder why exactly the RS7 was misfiring because of "a tune." I don't know Audi tuning very well is there a company that unlocks the ECU (or whatever German acronym they use)? The exhaust was mean sounding which I like but the misfiring is strange. Follow up video would be good to see.
@realcarninja
2 жыл бұрын
It had faulty injectors. The aftermarket tune was of unknown parameters and just made it a bit tricky to get an accurate diagnosis.
Wasn't that Audi RS4 at the Wizzard's a couple of months ago? Edit Yes it was😅
Hello
I wanted your opinion Car Ninja, I would love to see if I can get myself a used EV car, without Tesla being mentioned, as I cannot afford a Tesla, and personally would neve ever think to buy one even if I could. Any other recommendations?
@andreyd8116
2 жыл бұрын
Look into BMW i3. The pure EV version (80+ miles of range depending on the year) is pretty bulletproof since no ICE engine to fail or leak oil from, lol. But there is also a version with a REX (range extender - small 2 cyl engine that can charge the battery when needed for extra range). The nice thing is their battery is water cooled (like in a Tesla), so it lasts longer than air cooled Leaf batteries that are prone to overheat and fail prematurely. They also have 8 year/100K miles battery warranty for extra peace of mind. I would advice against 2014 REX model with low miles but anything 2015 and up is a safe bet. The only drawback is tires are weird size so only one option available that costs $800 for a set of 4. Good luck!
"audi rs4, i think, whatever this thing is" maan this is sad... :(
You should rename you business shit in a shed hahahaha😂😂😂😂😂😂
If it was called asain auto works it would go out of business cause they don’t need repairs just basic maintenance
The famous s4
Thats exactly why the Ninja makes several Million a year...
@webfreakz
2 жыл бұрын
Sure buddy
@nde-mt2yc
2 жыл бұрын
@@webfreakz Probably 3 to 4 Million...
@webfreakz
2 жыл бұрын
@@nde-mt2yc yeah, no.