Canon Printer MG3560: How to Connect To Wi-Fi Router Network (iPhone / iPad)
Ғылым және технология
See how you can connect the Canon MG3560 Printer to a Wi-Fi network and use it.
FOLLOW US ON TWITTER: bit.ly/10Glst1
LIKE US ON FACEBOOK: on. ZKP4nU
www.itjungles.com
ITJungles assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ITJungles recommends safe practices when working with electrical tools, power equipment, automotive lifts, lifting tools, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ITJungles, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ITJungles. Some repairs are easy while others maybe difficult. The level of difficulty depend on your personal experience. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
The above may contain affiliate links.
Пікірлер: 171
i'm gonna cry it's so frustrating
Perfect thank you! I moved and couldn't possibly remember how I originally set up this print so many years ago. This video was exactly what I needed. And even though I used my iPhone to set it up, it was able to print from my computer too without any further set up.
Thank you so much - wish I'd found this earlier and saved myself hours of trying to sort it! So easy when you're shown, step by step, how!
OMG! After two days of trying to get my printer to print wirelessly, your step-by-step video instantly fixed the problem. Thank you!
This is the most stressful thing I have ever had to do (:
@aprilvillada1707
3 жыл бұрын
did you ever get it to work??? I'm having the same issue. I hold it down and the orange light doesn't cut on
@maryamspalace8558
3 жыл бұрын
April Villada yea but it only connected to the windows laptop, it doesn’t connect to any Apple devices whatsoever, for me at least
@D-Rodriguez777
3 жыл бұрын
@@aprilvillada1707 I'm having the same issue!!
@BSON900
3 жыл бұрын
@@aprilvillada1707 me either!!
@MyaoChan808
3 жыл бұрын
Same, my blue light won’t blink :(
HUZZAH!!! Thank you for posting this tutorial. Almost bought a new printer as I was almost at the end of trying to get it to sync with my new router. THANK YOU!
Thanks very much, i too spend 10 hours trying to connect without succes. With your video the job was done wintin 10 minutes. Jahoeoe!
Whew!! I am so happy I found this video! We got a new 5g router yesterday, and after getting it all setup on our tvs, I spent the rest of the day until 2 a.m. trying to connect my Canon MG3500 printer, and finally gave up and went to bed. Found your video this afternoon, and what an easy setup! I can't believe how simple it was nor can I believe that CANON did not show this on their troubleshoot website, or if they did, I never could find it! Thank you!!
Nach 3 Stunden dieses Video gefunden und zack nach 5 minuten ging es, großes dankeschön
Thanks so much! Spent like 2 days trying to figure out how to connect my printer to my Macbook and finally this worked.
This is the best video on how to set up. Thank you
Thank you! This is the only video that worked.
@tiffaniallen6408
3 жыл бұрын
Same!
thank you customer service tried to charge me $89 saying that my computer had to many of something i hung up and found this video after several other lame videos of unboxing thank you so much very clear and my printer was finally found on the app this morning 06-17-20 i knew it wasnt that difficult
You made it so easy - thank you! 🙌🏾🙏🏿
If your power button is the one that flashes instead of the one in the video, press black. Worked for me
@blackboy7199
3 жыл бұрын
Thx bro u a life saver
@abbyspicer4076
3 жыл бұрын
Omg thank you this is a life saver
@vifujioka
3 жыл бұрын
Do we hold it down? Or what because when I did it it didn't do anything
@alexx4098
3 жыл бұрын
@@vifujioka try holding it. I honestly don’t remember cause I only did it once & that was a while ago
@idk-me8iw
3 жыл бұрын
neither are working for me, the wifi one would not do anything, and black would flash the power button
My wifi doesn’t flash :/
Yes very useful compared to.others. Thanks so much
Oh my GOD. THANK YOU. Gave up years ago on this because I was never able to find the printer w/ my PC. Now finally....
This is from Canons official website and it worked for me. Your have to enable the wireless LAN settings, most printers will be disabled which is why many people are having the problems. If your power button is flashing instead of the blue WiFi light or 'Cannon' isn't showing in the available networks, follow these steps. Move your printer as close to your wireless access point/router as possible, ensuring that there are no devices that may be causing an interference. 1. Press and hold the STOP button and release it when the Alarm lamp flashes 21 times. This will initialize the machine settings. 2. Next, please turn off the printer, unplug the power cord and leave it out for at least 10 minutes, then plug it back in and turn it back on. 3. Once the printer comes back on, please press and hold the Wi-Fi button, then release it when the ON lamp flashes. 4. Press the COLOR button, then the Wi-Fi button in this order. The wireless LAN setting of the printer is now enabled. Please also download the 'canon print inkjet/selphy app' from the play store and follow instructions. Hope this helps!
@7Mikalel7
3 жыл бұрын
Thank you, i think your help is good for users that have his printer already configured with an old SSID's name Box
Thank you for instructions, it works for Canon PIXMA E560 series as well.
Your setup video is way better than Canon's video.. Thanks it works
Thank you for your helping tutorial👍
I had changed my WIFI network with TP-Link EAP245 WIFI Access points which do not have WPS function, I had set this up with different SSID's There was no Canon instructions showing how to change my Canon MG3650 SSID from the old SSID to a new one. I had spent hours trying to find a solution to connect the printer over WIFI until finally stumbling on this guide. With this guide I was able to connect to the printer and change the SSID Using Iphone Canon Print App using Check/Change Setup > Network Setup select the Printer SSID and then change the connection to my TP-Link SSID. Thank you very much for sharing
Great Video... This one works. Thanks.
Thanks so much! That worked really well:)
Worked perfectly thank you
Muy buena explicación, Muchas gracias.
Thank you best one so far all the other videos suck
What do the long part that in the back of the printer have to be attached too ? Cuz I got the same one ? Please help !!!!!!
Woked perfectly thankyou so much
This video helped me successfully connect in minutes after many unsuccessful hours of trying on my own previously! Thank you so much. Highly recommended
This ain’t working
THANK YOU SO MUCH!
Appreciate it thanks help alot
Super useful, thanks a lot for making this video and more so for sharing. Deserves many likes..👍🙏
Thank you very very very much. I deeply appreciate your video. We recently changed our WiFi router, password and everything... didn’t realize that this printer was a pain to reinstall😳🤦♀️I was just about ready to get rid of it and buy another one ☝️ and boom 💥 🤯, I came across you 👏🏾🤜🏽🤛🏽👍🏾🙏🏾🙏🏾🙏🏾🙏🏾 thanks so so much. Be so blessed👋🏾
Finally a video wjat actually shows you what to do. Thankyou ❤️
Bless your sole
Tysm ur amazing horaaaaa my dad didn’t know how to do it but I learned it from u and I did it for them:)
Thank you 👍
Does this work for other canon printers?
Thanks men 👌
Thank you
спасибо единственный человек благодаря кторого у меня получилось подключить
Thanks bro
Thank you so much, I think I did it lol
Instructions are clear and useful. Thank you.
The cannon_ij_setup WiFi doesn’t come up
@quinzy0544
3 жыл бұрын
Same
@rahulagg911
3 жыл бұрын
Same
To everyone who struggle to get flashing WiFi light Long press WiFi button and then the power button start to blink Now press on the color button once and then again press on WiFi button once .. you will see the WiFi light blinking now Go to WiFi and search for the printer name and it will be displayed there My printer model - MG3600
@Ishutyoudown323
3 жыл бұрын
BRO THANK YOOOU!!!!!! 🙏🔥🔥🔥🔥🔥 i was about to punch a hole thru this printer holy 💩 ‼️ ur the 🐐
@folusoakingbade2400
3 жыл бұрын
Thanks 👌🙏
thanks bro
So to be clear you do need to have wifi in order to print from your phone?? You can’t just connect your phone to the printer and expect to print w/o the connection to a wifi signal correct?? Or do they give an option to connect w/o a wifi connection?
@Itjungles
3 жыл бұрын
You will need Wi-Fi to print.
Thanks 😊
@raniaal-lawzi1329
2 жыл бұрын
I have been hours trying
If the printer is not getting detected after this.. then restart the printer.. it worked for me.. thank you..
@alyssaloftis1031
3 жыл бұрын
how do i restart it
@Nycshants868
3 жыл бұрын
Alyssa Loftis how to restart it ?
My printer doesn't find my router wifi. It shows all my neighbours' wifi names, but not mine. It used to work fine, then it went offline & doesn't find my wifi. What do I do?
@miattamustapha2007
2 жыл бұрын
Yes same with me
Thanks a lot man. This one worked for mine,model MG3510.
Canon E560 how do set same problems?
What’s happens if your WiFi button on the printer don’t turn on but the other buttons are on?
Merci pour le tutoriel,je ne savais pas comment faire,j'ai essayé de trouver pendant des heures mis en vain
Which button is the front panel
The yellow light for me keeps blinking when i just switch it on. What to do
@Niteshmishraa
3 жыл бұрын
Same here
Tq....
Can you setup a printer using your phone instead of computer?!
@kmitchell3991
Жыл бұрын
I used my phone.
If it flashes 3 times is it OK yes or no
Like many in the comments, my yellow alarm light didn't flash either after holding down the wi-fi button,.. so I eventually figured this one out using my iPhone after I downloaded the Canon Printer App... Hold the wi-fi button down until you see power button flash. Then tap COLOR button, then wi-fi button again. The wi-fi blue indicator should start flashing. Go to the app and look for "Canon_ij_xxx" SSID then connect to it. Once you are connected on your phone, then you can walk through the steps to connect it to your home router. Once it connects to the router, you will then be able to connect to it over the wireless network. I am able to print to it using my apple devices (macbook, iPhone, iPad) and Windows PC.
@osvaldocontreras1991
3 жыл бұрын
Thanks bro! I finally got it to work after trying for so many hours.
@iamamom4713
3 жыл бұрын
Mr Greg! I have to say thank you 100000000 times. OMG! I was stressed out. Your comment should be the video👍🏾😁
Please help... When I push WLAN button, than nothing blink for me. And when I push COLOR button, then everything blink. What can I do?
@Hesterblomov
3 жыл бұрын
Here the same, do you have a solution?
Will it work with a Iphone 7? And with a Samsung galaxy S7?
@Itjungles
3 жыл бұрын
Yes.
I have tried to follow these instructions, but when I connect to the printer in my iPhone's wi-fi settings, the screen tells me that there is no internet connection. After that, the Canon Print app can't find the printer when setting it up. I have tried to do the factory reset beforehand, but still no luck. Anyone has any idea why it's not working?
I bought a new printer of this model which I had used 8 years and I still love it. However since I'm using it at college, I am not in control of university's wifi. I couldn't connect them properly and making me so stressed. I can only use my printer via my laptop.
Does anyone have an issue with borderless prints? It severely reduces the quality on plain paper vs non borderless. There is some sort of bug
do you NEED WiFi for it?
I have problem connecting my printer to wifi when choose my router it comes out automatically connect rather than asking my home network password. i believe its the security router problem setting need to be openned on my own line internet website for allowed the printer to connect, so i rather connect my printer canon pixma e560 to my phone mobile data and temporary im setting to forgot my home network router and connect only to my mobile data other phone and its works well, it doesnt work while im connect to 2line network, to be clear my samsung are the mobile data and sharing the network with my iphone & printer)
I FUCKING LOVE YOU!!!!!
I followed it the light is blinking but on my phone it isn't showing under wifi networks! 😒
@paddyh4272
3 жыл бұрын
You’ve got to set it up on a laptop first on your local WIFI and then you can download Canon app on your smart-devices which will find the printer 🖨 to use
Need to setup everytime
when i hold the network button in the power button only blinks
@LenaSuenos
4 жыл бұрын
Me too did u fix it? What did u do ?
@DarkmanXSincere
4 жыл бұрын
Same problem!
@alyssaloftis1031
3 жыл бұрын
William E did you fix it? i need help
@Nycshants868
3 жыл бұрын
Alyssa Loftis also need help
What do you do when it doesn’t connect you to temporarily Wi-Fi
It won’t work for my apple
My printer won't connect to the Internet and it keeps sending me network confirmation pages saying the connections are disabled
@daisyvee5843
3 жыл бұрын
Same!
Same printer little different, have the WiFi symbols not buttons
the light that flashed twice for you it always flashes for me how do i get rid of it
@alyssaloftis1031
3 жыл бұрын
what do you mean press black
When I do the WiFi button the turn on button blinks
@gracielavaldepena377
3 жыл бұрын
Same 😣
Can i know how to know own password wifi ? Or put new password went to use? Can u explain this?
@Itjungles
3 жыл бұрын
The phone will copy the password over to the printer.
I press the WiFi button for a LONG time , NOTHING happens!
@emers4788
3 жыл бұрын
The same thing is happening to me too!
@Nycshants868
3 жыл бұрын
Emers 47 same did y’all figure out how to fix that? The blue light isn’t coming on
@gemmawild6221
3 жыл бұрын
How do you set it up I need help
@gemmawild6221
3 жыл бұрын
I have done it thank
@emers4788
3 жыл бұрын
 you solve the problem?
My one keeps flashing 3 times (the orange one)
The canon wifi doesnt appear :( what do i do
This video actually works 😭
@malynnaalysiah
4 жыл бұрын
Can you help me set up mine? By explaining please
@malynnaalysiah
4 жыл бұрын
I don’t have a computer or laptop.. just an iPad and iPhone
If it's connect without wifi router? Clarify my doubt
@Itjungles
3 жыл бұрын
You can do wifi direct or through wifi router.
I can’t even get the first step working I’m gonna throw this thing out the window
:57 press and hold WiFi button, that triangle button never blinks. Wtf why is this so hard.
How did you got password
The only thing started flashing is the power button. The WiFi is still not appearing on my phone. 🤦🏽♀️ this is frustrating
@renettenette6737
3 жыл бұрын
Same 😒
@ms.toythereview1839
3 жыл бұрын
@@renettenette6737 I figured it out. I did a 1minute video on it. You might can click my picture to get to my KZread channel. Hopefully it will help you out.
@ 1:50 I’m never given this prompt of which wifi to connect to. It just says “info is sent” and when I go to print there never appears a printer on the network. Fuck I wanna pull my hair out
I cant see the wifi connection
@nimsa7548
3 жыл бұрын
Are you still having this issue?
anyone else can’t find the exact app??
His microphone is poor and his strong accent made it hard to understand, but after 6 times listening, it is good.
@miattamustapha2007
2 жыл бұрын
That wasn’t necessary
@kmitchell3991
Жыл бұрын
I had no problem understanding him, and his visuals are outstanding.
How did u get the password :/
Idk but my wifi is not showing my printers name
how do you get the password
谢谢您(#^.^#)
My wifi button doesn’t flash
@e20.44
3 жыл бұрын
Did u fix it because I need fucking help