Tries to build fire fuel accidentally builds fire proof panel

@radix4801

3 жыл бұрын

Still working on that Finnish space program, one project at a time.

@anow1693

3 жыл бұрын

@@radix4801 I don't know why I found this comment so funny lol

@josephwillis1581

3 жыл бұрын

Gotta love alchemy

@hawks1ish

3 жыл бұрын

Peat is a smokeless fuel

@tlotlisomoletsane3598

3 жыл бұрын

@@anow1693 its really funny 🤣🤣

In Ireland we use a tool called a sleán to cut it into bricks and stack these up to dry all summer to use as fuel in the Winter

@KBTW1

3 жыл бұрын

You can also use a specialised machine to cut the turf into briquettes. Using a Sleán is hard work.

@DaGizmoGuy

3 жыл бұрын

In Shetland we use a tool called a tushkar

@captainaleouse

3 жыл бұрын

@@DaGizmoGuy tairsgear down here in the western isles

@timharris3292

3 жыл бұрын

In my part of the Yorkshire Pennines it's just called a peat knife. You want to go for the darker coloured stuff. Just cut it into bricks, stack them (gently), and let them dry. commons.m.wikimedia.org/wiki/File:Peat_Knife__-geograph.org.uk-__1341787.jpg

@captainaleouse

3 жыл бұрын

@@timharris3292 also called a peat iron in English here, is peat cutting still common in Yorkshire?

“It’s designed to extrude shit” my favorite quote

@roosevebltjenkins5615

3 жыл бұрын

Mine was *"It's surprisingly moist"*

@AnoAssassin

3 жыл бұрын

Mine was "Briquette Maker 5000000"

Peat is a common fuel in parts of Scotland and Ireland. It burns more like coal, so there is little flame compared with wood but it smoulders and makes hot embers when you burn a full load of it. Like a coal fire it benefits from being burnt on a grate to allow air flow from below, up through the embers. Wood prefers to be burnt on a bed of ash with air drawn in from the sides.

@christophpoll784

3 жыл бұрын

My grandma used it to keep the fire going over night. You just place one in the oven (she had a coal fired stove in the kitchen) and it kept smouldering over night. In the morning, you just add some wood and get a fire going in no time. Also heats the house and is quite safe, as it burns slowly

@hammyh1165

3 жыл бұрын

The smoke is good for keeping the midges away too 🙂

@jamesbrown4092

3 жыл бұрын

@@christophpoll784 I used to do the same thing with my coal burner before bed: Throw a generous scoop on and once it got going, cover it with ash, then poke a single hole in it so it doesn't smother completely. Slow heat all night. Then in the morning, I'd give it a quick stir with the poker and I'd have an instant ember bed.

@cozmium

3 жыл бұрын

I've lived in Ireland around 7 years now, and I like the laziness of peat - you can set a fire going and ignore it for hours, then just top it up a bit. I use coal to burn wet/non dry wood though, it has vastly more joules/kg.

@Pauly421

3 жыл бұрын

It smells fookin lovely too :D Nostalgic of visits to my grannys house

There are a few videos on KZread about pressing leaves into briquettes/logs for heating. I, for one, would love to see you guys make your own version of leaf based briquettes!

@ChuckRage

3 жыл бұрын

That's pretty cool, do the leaves not smoke a lot though?

@doublejaylar

3 жыл бұрын

@@ChuckRage, one of the videos I watched, was of an older gentleman who collected leaves, mixed them with starch as a binder, hydraulically pressed the "logs", & then dried them before use. They seemed to burn like other composite logs. I'll see if I can find the video & share the link.

@ChuckRage

3 жыл бұрын

@@doublejaylar awesome thanks!

@doublejaylar

3 жыл бұрын

@@ChuckRage It has been many years since I saw it. But it was similar to this one. kzread.info/dash/bejne/mnqHuNaDktOudps.html

@wernerhiemer406

3 жыл бұрын

My father had a "press" to make bricks from newspaper. Merely like a french fries maker but closed on all sides or was it a mold mounted into workbench? But now I have no fireplace, just natural gas heating in the flat. And it also was only for small green house heating.

I recently rediscovered this channel. Fell in love with it because of the charming simplicity, not too much bells and whistles. Just a guy and his wife squashing things with a hydraulic accent with laughs and an awesome finnish accent to boot. Glad to see you guys stayed true to who you are

@omnacky

3 жыл бұрын

The ol' hydraulic accent

That thing would burn for hours, smoky for sure. I would bake it for an hour at 350, to really dry it out

@fewwiggle

3 жыл бұрын

When it takes more energy to make your briquette than you get out of it..... :-)

@randomrando8350

3 жыл бұрын

@@fewwiggle isn’t that the same with charcoal? You cook wood to get fuel?

@ThePaalanBoy

3 жыл бұрын

At 350 what?

@Bluntz_

3 жыл бұрын

@@ThePaalanBoy Kelvin

@fewwiggle

3 жыл бұрын

@@ThePaalanBoy PSI :-)

Bro the spider on the plastic bin at 2:29

@realflow100

3 жыл бұрын

spider was on the inside lip of plastic!! he ok! if you watch carefully you'll see :D

@dashtesla

3 жыл бұрын

halloween XD

@rogertycholiz2218

3 жыл бұрын

Onex - Very few of us watching saw it. The spider is a very deadly Huntsman.

You could press bread and look if it works like a heat shield too afterwards. It is a pretty good heatshield in it's natural state already so it would be interesting if pressing it makes it better or worse.

@dimitar4y

3 жыл бұрын

actually wouldn't work, the reason it's good shield is of the air 'balloons' inside. If you crush it, you lose the balloons.

@kjdude8765

3 жыл бұрын

AvE turned bread into carbon foamy which is a great insulator. kzread.info/dash/bejne/iZmswduEltW6n5c.html

@shirothehero0609

3 жыл бұрын

Loaf press!

@chabis

3 жыл бұрын

OK, seems to work this time. I too expect the insulation will be worse when crushed. But a test if it really is that way would still be fun.

@fuzzy1dk

3 жыл бұрын

@@kjdude8765 another one kzread.info/dash/bejne/eKF5xJOSirbJqMY.html

I’ve always loved this channel of course, but the fact you’re from Finland is icing on the cake. My grandma was from Pori. Keep up the great work, love you guys! 🇫🇮 🇺🇸

I love that your wife helps with the channel and so much fun! You guys make really entertaining stuff!

2:29 RIP spider homie

@realflow100

3 жыл бұрын

spider was on the inside lip of plastic!! he ok! if you watch carefully you'll see :D

@Stoneman39488

3 жыл бұрын

@@realflow100 he lived and now he will breed into billions of spiders 😤

You could also try bales of straw or shredded paper! I remember my grandmother making her own "logs" using damp newspapers compressed into a brick and dried.

"it looks like you could you it as a heat shield on spacecraft" nearly brought me to tears laughing

Where I live peat was (and occasionally still is) used as fuel in homes. Peat works as a fuel because, when prepared traditionally (cut into blocks, built into walls with gaps, then wind dried for months outside in various different arrangements to dry out all sides of the blocks), you end up with all the moisture out, but there will still the hydrocarbon fuel left in it. That is what burns. When you look at peat banks, you can often see the blue oily sheen in it. I think compressing it and drying it at such a high temperature in the masonry oven has probably evaporated the remaining fuel, and all the rest is just compressed moss that isn't very flammable at all. The different colours are probably different levels of decomposition - the black peat will be more decomposed (basically, getting closer to coal than being soil).

@downsouthtroutmouth6217

2 жыл бұрын

This

At first I thought it was cow manure. LOL

@hossmcgregor3853

3 жыл бұрын

Funny thing, in the Texas High Plains, they used to burn dried cow 'chips' or manure. There are no native trees up there.

@that1guy82

3 жыл бұрын

My grandfather would on his farm. He didn't have cows but the neighbors farm had a few. The had an agreement to watch each others farm when they were there cuz neither were out there everyday. It works great to start a fire, just make sure its dry 1st

@Quetzalcoatlv3

3 жыл бұрын

@@that1guy82 "just make sure its dry 1st" Hahah 1) Don't use wet shit :D

@clutchkikn.

3 жыл бұрын

Same thing

@stein1385

3 жыл бұрын

turds

I think they would make good patties for vegetarian burgers.

@riaranta3150

3 жыл бұрын

👌🏻😂

@harryballsacky

3 жыл бұрын

OKAY BILL GATES

@BxBxProductions

3 жыл бұрын

sT0nkS

@alanloyd7164

3 жыл бұрын

probably taste better

@iconic762

3 жыл бұрын

@Daniel Meyers yes. Awful.

"So now it's briquette maker 5 million" Even after all this time, this still made me fucking laugh. Why does that joke never get old?

The smell alone makes a turf (aka. peat) fire absolutely worth it. It's incredibly comforting, homely and instantly recognisable too!

Hello guys, nice to see that you made a mold according to the drawing I sent you and as I told you then, it works wonders. Nice job !

It cracked from the mouisture trying to escape when you dried it out at the end, you should have dried the bits first in the oven then pressed it down into the briquette

My local store once sold charcole briquettes that were impossible to light, now i know how they did it

I love the simplicity of this channel just going to put this shit in here no fancy jump cut's or over complicated explanations

Here in Scotland a lot of rural towns and houses like to use Peat as a heating fuel. My Gran used to sleán a load of Peat in the summer and store it in a drying shed for when winter came. I loved the earthy smell from burning Peat in the winter. - *FUN FACT:* The water in Loch Ness takes on a nice reddish brown colour which is caused by rain water draining through the Peat on the hills. This Peaty water is also drinkable, basically you can literally drink straight from the Loch water and to those not in the know (tourists etc) it looks like you are drinking muddy water, lol.

Next time you're out in the peat bog, find one of those ancient bog bodies and use it for the extra content. Those things are scary.

I just poured a glass of peated Scotch, refreshed KZread, and...oho.

@JohnCena8351

3 жыл бұрын

Cheers

@saml7610

3 жыл бұрын

Peated Scotch? I've never heard of that - you've turned me on to something new and interesting! How do you like it? It sounds a little strange to me, but I suppose the high carbon content would act in a similar manner to scorched oak barrels, essentially removing impurities. Is it smoother than regular scotch?

@michaelhartwig3417

3 жыл бұрын

@@saml7610When drying the malted barley they can use burning peat as the heat source. This imparts a smoky flavor.

@timothybarney7257

3 жыл бұрын

Laphroaig?

@Are0hEssEss

3 жыл бұрын

@@timothybarney7257 Ardbeg An Oa

In Canada we used to have a product called Presto Logs, they were essentially sawdust pressed into long cylinders that resembled logs. It was difficult to get them to light on fire but after they were lit they burned nicely.

@canadiangemstones7636

3 жыл бұрын

Still do. They still suck.

Moi! Yet another great video from the team of Annihilations and Lauri. Interesting but if nothing else I always enjoy the Rally English and Anni's laugh. Moi Moi!

"doesn't seem dry enough" could also be those large holes in the plate.

Had me laughing when you said "its surprisingly moist" ...

@bluemoves

3 жыл бұрын

That’s what she said.

@mil-fpv4931

3 жыл бұрын

@@bluemoves kzread.info/dash/bejne/nat1uKublbueeJc.html

@gumelini1

3 жыл бұрын

That's what I thought when I had sex for the first time

The air between the fibers is probably the magic sauce that makes peat good for fire starting.

The beat briquette used to be quite common heating material quite lately in Estonia. I do not know how was it made, but I suspect something similar way you did. Note: Lighter material has more not decomposed material thus burning, dark one is close to the regular dirt what is unburnable.

Alternative title: baking the most compact loose snus prilla

Why not put the pre-pressed moss into the brick oven? Dry it before it presses and the water can escape more easily

In civil geotechnical engineering we occasionally have to dry samples of peat soils to characterize their organic content. We do this in an oven at about 100 degrees Celsius for 12 to 24 hours.

Interesting video and it was fun to see the result even if it wasn't what we hoped for

I thought it would work as fuel, but my expectations were shattered

@dimasalmadany3062

3 жыл бұрын

Frist

@ToKro

3 жыл бұрын

It does work as a fuel. You can look it up on Wikipedia, it used to be quite normal way to heat up your home until like mid 20th century in some regions. I think the problem is that it was compressed way too much. The traditional way to do this is just to make brick-sized blocks out of it and then let them dry in sun. Their compressed blocks were probably too dense to burn in normal conditions, it would probably need much more heat to catch fire, like in the power plants that Lauri has mentioned.

@youtubeSuckssNow

3 жыл бұрын

@@ToKro yeah in order to really get this kind of thing to burn it needs to be a pressurized fire, it just won't work very well like this. If it wasn't so compressed it would indeed burn better than fire wood in a normal fire like this.

@julianrosenfeld7177

3 жыл бұрын

Why are you here please stop following me

who you gonna call? hydraulic press channel! ;)

Usually, in factories where charcoal is made, they put the raw materials into a dryer before pressing in briquettes. I also believe they add corn starch to the materials as they're preparing the press them.

In Ireland there has been a company called Bord Na Mona who produced compacted peat moss (called briquettes) for burning as fuel. My dad worked for them for several years fixing and maintaining the machinery. They are a long-burning efficient fuel source but peat is not easily renewable as far as I know...takes many years for it to form in the ground

Him: It’s like moist, Her: after touching it, jaa 😂

Well thats actually how fuel briquettes are made, using hydraulic technology.

Before I watched this, I saw a video on the traditional Irish practices of harvesting peat. They let it dry in the sun for months.

Pressed peat briquettes were very popular fire material in Estonia up to mid nineties or maybe even later. There are lots of peat bogs in Estonia and a lot of hoseholds with ovens used briquettes as main fuel. You must start the fire with wood and then add the briquettes. They catch fire slowly but once you have them burning they burn like hell and give a lot more heat than wood. Must be careful because lots of unexperienced briquette burners literally fried their ovens.

“Briquette maker 5 million” 😂

@Hydraulic Press Channel Been watching/subscribed since basically the beginning. Why not use dried cow manure in the press for fuel briquettes? I know that you can burn dried cow droppings. Give this a try.

That was a really cool one!

we use to make waste paper bricks from wet newspaper the summer before needed much inn the same way only with a smaller press ... worked great !

2:00 every morning after my coffee

@5hiftyL1v3a

3 жыл бұрын

Why is it that some junkies get a slide because everyone’s ok with their drug of choice? Like if I told everyone I couldn’t function in the morning without my drugs, that it interfered with my digestion and sleep patterns and made me irritable when I couldn’t get my fix, everyone would tell me to get off the gear.

@Theeswaglord

3 жыл бұрын

@@5hiftyL1v3a it ain’t that deep💀

@foreverhungry84

3 жыл бұрын

@@5hiftyL1v3a you need help, please get therapy

@5hiftyL1v3a

3 жыл бұрын

@@foreverhungry84 nah im fine mate. I aint the one addicted to drugs

@fwingebritson

3 жыл бұрын

@@5hiftyL1v3a Not me man, the way I see it, it's your life your choice.

I defenitly need an explanation why the cute "Slimer" had to be crushed.

@KBTW1

3 жыл бұрын

Because it very dangerous, so they must deal with it.

@GOAT_GOATERSON

3 жыл бұрын

@@KBTW1 and it can attack at any moment

@hedgehog1965uk

3 жыл бұрын

@@GOAT_GOATERSON Thank you. I missed him saying that. I haven't been on this channel for a while and I wondered if he didn't say that anymore.

We got some old technique in an area thats called „ hohes venn“ where our grandparents cut „torf“ into chunks , piled them into small towers and let the wind dry it. An it worked as fuel for a long time , but what you are trying seems like lighting a diamond by a match 😎. The cracks are occurring because the puck takes moisture back from its surrounding air ( similar to a compressed dry compressed sponge ) , so solution: less force , more natural drying and it should work. ( the old process took up to 6 month to get from wet stuff to usable fuel““

Very interesting results. I would have never guessed it would hardly burn. Pretty good. 👍

I can’t believe it made a PERFECT piece of plywood, but then refused to burn! What a rollercoaster of emotion.

"I'm not going to go totally crazy!" Proceeds to squash sh!t in his hydraulic press. Oh how I love this channel!

That would be perfect ecological, fireproof building material actually.

Love the extra at the END!

Most European episode yet

@HydraulicPressChannel

3 жыл бұрын

Peat is quite hot topic in Finland since we have a LOT of it but it's kind of fossil fuel so not the most eco friendly thing to burn. And you ruin the swamp when you dig all the peat out.

@mileslong7103

3 жыл бұрын

@@HydraulicPressChannel interesting. My dad was telling me a lot of people heat their homes with peat in Ireland a couple years ago. And as an American I couldn’t believe people actually burned with what’s basically dirt

@minimalgrammar1276

3 жыл бұрын

@@HydraulicPressChannel Ooh yeah, that would mean it's not sustainable either.

@RealUlrichLeland

3 жыл бұрын

@@HydraulicPressChannel "Hot topic" I see what you did there, because you burn it

@thomasneal9291

3 жыл бұрын

@@HydraulicPressChannel yup. it's literally removing already fully sequestered carbon... and releasing it back into the atmosphere. we need to find a way to MAKE peat, not burn it!

2:52 when your fart comes with surprise

@Drozey710

3 жыл бұрын

4:25

I used to design cylindrical enclosures for oceanographic instrumentation and some were designed to go extremely deep. There is data for piston style O-ring applications. Clearances must be extremely small. Also, O-rings are made in various hardnesses (durometer). What is not well known to many is that O-rings must move when under pressure. They no longer have the original cross section, but cram tightly towards the seam where they might be pushed out. The cross section becomes sort of triangular under high pressure or perhaps a little more accurately sort of like a piece of a pie shape. Higher pressure situations also can pose a risk. If something leaks, then there can be high pressure INSIDE with low pressure outside such as you standing next to it. When disassembling the item, it can have the effect of an explosion. For this reason, sometimes bleed screws are added to the design which can be safely loosened to vent possible internal pressure. Or the enclosure can first be filled with an inert liquid which, of course, can't compress. I don't think there was any internal pressure risk in the experiment here because there just wasn't that much volume compressed in the first place.

Canadian here - my first thought was that you made an oversized hockey puck! Well done!

2:28 Hello spider friend.

8:13 "Extremely dangerous _gringos_ ..." 🤣🤣 True dat

Try adding water to the briquette, I think it should expand back to its original size (or close). Awesome video :D

Interesting idea, thanks for sharing!

I will never get over the fact that you say "hoo-draulic press"

@fredrikbystrom7380

3 жыл бұрын

Saw on their vlog once that they didn't realize they were mispronouncing hydraulic until like a year after they released their first video. But by then they felt that their "incorrect" pronunciation was part of their brand, so they are now intentionally mispronouncing it.

@highgroundproductions8590

3 жыл бұрын

In some languages, the "y" makes such a sound.

I wonder if you added an accelerant before pressing it if it would work. Like lighter fluid or kerosene or somthing

@firefoxjb

3 жыл бұрын

Paraffin wax would work, it can't evaporate and it would reduce the friction while pressing.

@fredrikbystrom7380

3 жыл бұрын

My gut feeling says no. In that case, I would imagine that the accelerant would start burning but the actual peat still wouldn't burn.

In germany peat was cut directly from the ground in shape of bick bricks traditionally and used as a fuel when dried. Still sometimes in summer when it is to hot, peat fires occur, where the fire crawls under the ground surface and the firefighters have to cut barriers in the ground and soak the whole area with water

We have peat fuel briquettes in Finland and they work just fine, just produces lot of ashes. My parents used to burn them for few years back in the 90s. The peat tiles looked so weird as a kid and i didn't think they would burn at first.

Turd maker 5 million

When youtube page refresh is faster than notifications😂😂

Maybe use some when you roast your beer malt. I like some of the Scottish beers that are somehow made with peat smoke flavor. They're also interesting because just a little bottle has all the alcohol I'd typically want in an evening. Where I grew up, our back yard seemed to be made of stuff midway between peat and coal. When it dried, you had to be careful with fires because the ground would catch and smolder until it rained. It smelled like burning tires. Also when it flooded it would cover the water in oily rainbows. There were nice pieces of wood in it soft enough you could squeeze the water out of it with your hands, but if allowed to dry it was an attractive brown color and full of large "worm holes." I don't know how deep it went but it was easy to push a full length of rebar into it. I once sank into it almost up to my neck. Like quicksand, moving seemed to suck me in deeper until I was inches from drowning. Fortunately my friends were there and pulled me out with a sapling. It was freaky having a worm's eye view since the area was crawling with poisonous cottonmouth snakes, the only species I've met that will actually chase people.

I love how good your English is but how strong your accent still is, I find it really pleasing!

Thought “dung” from thumbnail.

Well, it kinda looked like sub-bituminous coal.

@alyssasabrae7943

3 жыл бұрын

I was looking for a lignite coal comment. Yours is the closest so far.

@zaphodb777

3 жыл бұрын

That would be more correct Nicole. Greetings from Wyoming!

@alyssasabrae7943

3 жыл бұрын

@@zaphodb777 Hi from the Atlanta area! I have my towel. 😃

I run a machine shop also and I mess with magnesium a lot. I mixed some magnesium shavings into some sawdust and pressed them into a briquette. Them suckers burn real hot!

I would stick to using it to improve garden soil. I think it would burn better with very little compression but that was interesting.

Can we get a petition going to change the channel to the “Hoodrolic press” channel?

@justskip4595

3 жыл бұрын

But then it would be pronounced differently.

@lukevulcano587

3 жыл бұрын

no

Now we know how fruitcake is really made!

My favorite final boss in a long time!!! He was adorable! I wonder if you mixed some oxidizer in with the peat if that would help it burn. Some dissolved potassium nitrate or similar.

What i learned is that ancient turds are everywhere in finland!

@CarmelCatz01

3 жыл бұрын

Woooosh

You basically made lignite, a form of low grade coal.

That poor green ghost looks like he was trying to give you a hug

Australia used to have a "brown coal" power plant, story I've been told it that half the heat it generated was used to dry the "brown coal" and only the other half was used to generate electricity.

Now raise the pressure and make diamonds and make that REAL KZread money!

"fossel fuel? i would shut down this hydralic press channel if im president" - Joe Biden

@SuviTuuliAllan

3 жыл бұрын

Oh? If only he actually cared about shite.

Very interesting, thought it would burn with the wood. Must still be to much moisture even with the backing. May be bake dry before compressing and compressing less so air can get to the material. Thank You.

I was going to suggest a dehydrator for the peat to get every last bit of moisture out first. The compressed disk still looks wet and you said it feels moist.

Try making a cup with a cover that holds the pete disk in tact while you do a heat burnout and dry it further, I'd try adding a small amount of accelerant to the mixture also..it could also be easier with smaller quantities..pretty cool mate

Space shuttle tile from peat? Nice work.

The brown peat I think has iron in it. The brown is the oxidation of the iron. People use to get metal from peat along time ago to forge farming, hunting, cooking and fighting implements.

It may not burn, but I was satisfied to see that it formed into a great brick.

I've seen they have started selling a coffee ground/sawdust mix log at the shop you could try that not sure if you would have to dry the used coffee grounds first though.

Educational. Thanks!

Try someday make brickets from autumn's leaves or from spruce's needles ☺

Once you dry it then you can use it as a dense fuel brick. This is a good idea for camping. You have to mix it with some kind of fuel

I think that like ordinary fire wood the briquettes need at least a year to dry completely. I think it doesn't matter if you press the stuff in the wet state as the pressing removes a lot of the water, as long as there is a way for the water to go. Maybe tiny holes in the bottom disk. These are very similar to lignite briquettes, I use these in my stove to get a low but long lasting heat, for instance during the night. Lignite (or brown coal) is compressed and slightly carbonised peat, the next step in the transformation of plant material to coal and finally anthracite.

Fantastic idea. Maybe if you used a taller stack you can get some briquettes at least 5 or 6 inches thick. Should be enough to warm your shop in the winter. I wonder how long a 6" thick one will burn. It will work but you need at least 1 hold in the center or more to the outside. I live in S. Korea and they used to use compressed coal to make YEONTAN, (look it up on Google Images), which had a lot of holes for the fire to breathe

I"m Learnt Up for the Day. Kiitos Kids !!

With normal briquettes they are not as dense but has some air in it to help burn.

That looks like it would make a really good Fireproof insulation.