Great video. Thank you so much for taking the time to make and post it. My P747 is still working but it is now extremely loud. I'm going to take it apart and lube it up.

Thank you for the information. I have the same unit which seems to be much less efficient in pumping. I was also concerned that parts might not be available.

Great Video. I watched this after tearing down my pump and coming to the same conclusion

Thank you for taking the time to record/upload this video. You helped me find the hidden screw. :) Bad news is the motor on the high-pressure side of my pump is dead. I have a piston from a P747 that you can have for the cost of shipping. I'm in north central Florida. Just let me know.

@ThriftyToolShed

Жыл бұрын

Thanks for your kind comment. I wish parts were available for these. If you don't mind sending it my email address is thriftytoolshed@gmail.com

that was informative and fun thanks for your work

@ThriftyToolShed

2 жыл бұрын

Thanks for your kind comment!

Subscribed. I wish I knew how to do more stuff like this

Actually impressed by the pittsburg for having mostly metal parts inside for $8!!!!

I'm looking to use low-volt DC vacuums or other devices to force air through activated charcoal. I will probably be removing a bad battery on a dyson vacuum, hook it up to another source of power, and adding the charcoal to the container where the vacuum bag would be if a dyson had one. I'm doing this because of the WWIII thing, and the low DC volts is what is easiest to obtain through alternate power sources like solar panels.

Hey TTS. Your video on the kawasaki stx 12f display helped me repair my display. Thanks for that. Iam getting error on display. Did reset per manual. No joy. Any other ideas. Thanks.

@ThriftyToolShed

Жыл бұрын

The only thing I would know is to make sure there is no corrosion on the board. I know corrosion is a big issue on many of these. I cleaned a lot from the board in this video. Glad you found the video helpful and best of luck to ya!

I have the other ryobi compressor/inflator that you showed and it stopped working. Do you have a video on fixing that one?

@ThriftyToolShed

Жыл бұрын

Sorry, I don't have any other Ryobi Compressor/inflator repair video at this time.

Great video...Great job.do you know what size is the e-clip?mine is broken😮

@ThriftyToolShed

4 ай бұрын

Sorry I do not!

I have a P747 and a sigle blade just broke off from what looks like a fan. It still works on bike/car tires, so I think if for deflating or inflating on the other side. It looks like the fan at 8:43 on the right. Is that part available anywhere? Can I just remove it and not use that side?

@ThriftyToolShed

9 ай бұрын

The inflator/deflator has its own fan assy in the black disc shaped housing on the opposite side of the air pump. It even has its own separate motor. I believe you are referring to the cooling fan for the air compressor itself. It requires cooling because of the high temperature generated while compressing the air. It may be fine like it is or if vibration is really bad you may be able to break off the opposite side blade to balance better. I have not seen many parts still available for these now. You may get lucky and find one on eBay.

Nice teardown. How do you like that multimeter? I saw that brand on Amazon and was curious if you've had good luck with it.

@ThriftyToolShed

10 ай бұрын

The Kaiweets meters have all held up well. I have several I use on the work bench. They are good to me for the money. Thanks for your kind comment!

Hi Guys!!! Are the fan blades broken off behind the motor on the high-pressure side? The motor shaft on that side looks weird.

@ThriftyToolShed

Жыл бұрын

Yes, they are broken for sure!

@bryanmcfarland967

Жыл бұрын

@@ThriftyToolShed I was watching the AvE channel where he does a teardown of the Milwaukee M12 inflator. The pump/motor setup on the M12 looked practically the same as the one on this Ryobi. I guess these kind of inflators all do things about the same way.

@ThriftyToolShed

Жыл бұрын

They all do seem to be very similar. Also TTI makes Milwaukee and Ryobi so they may be even closer.

Looks like mine has a burnt chip on the board.

@ThriftyToolShed

2 ай бұрын

Hope it is still repairable...

Yeah it's a shame they build them so cheap and if you want to, and can fix it, it would cost you more than it would to buy a new one.

@jdmccorful

2 жыл бұрын

Agreed! Enjoyed watching though.

It’s not working because your fan blades are broken you need a new fan

@ThriftyToolShed

Ай бұрын

😂

Made really cheap. If you're not going to use it much maybe. Mine just broke. The cheap-o metal reed valve broke, It's so weak. No way to fix it.

@ThriftyToolShed

Жыл бұрын

It does bother me when things are made so cheap that there are no replacement parts and it's made so cheap it can't even be fixed.

@nobaddog1

Жыл бұрын

@@ThriftyToolShed I would rather pay a little more for something and have it last longer and be able to repair it if it does brake. Thank you for the video.

If you could buy spares from a company you would stick with them forever.

@ThriftyToolShed

8 ай бұрын

True!

How dare you present us with a failed repair ?? I expected much more from a country boy .................... :-)

@ThriftyToolShed

2 жыл бұрын

Right....