Calibration zero point steering angle position sensor

Ойын-сауық

Calibration zero point steering angle position sensor on Toyota, Scion and Lexus. This video shows you how to recalibrate the steering angle position sensor. If you have the TRACTION control light and/or VSC light on. The code I had was a C1290. My came on after an alignment and driving over 30 MPH. Make sure your OBD2 port is in the same position as mine in the video and count over 5 pins from right to left, if your OBD2 port is flipped count over 5 pins from left to right and jump both ports on top of each other with a paperclip. As always thank you for watching and hope this video helps.

Пікірлер: 192

  • @ichivancr
    @ichivancr2 ай бұрын

    I have Toyota Rav4 2017 with this exact issue. I did what you did and you saved me about 200 dolars. Thank you so much man.

  • @Mr_Fix_It

    @Mr_Fix_It

    2 ай бұрын

    Awesome! I love it!!

  • @vanleokc
    @vanleokc Жыл бұрын

    Thank you very much ! It worked on my 2003 Lexus RX 300. The VSC light came on just by itself. Without this clip, I would have brought it to the dealership and they have to charge a minimum of $269 to reset it!

  • @topmonkey6512

    @topmonkey6512

    Жыл бұрын

    Hello, here, just to let you know that you can also do this function with a comprehensive diagnostic device: kzread.info/dash/bejne/lKd129yMqcSrgMY.html.

  • @nelsontoranza1016
    @nelsontoranza1016 Жыл бұрын

    me funciono a la perfeccion en una hilux, muchas gracias por tu aporte, saludos desde argentina!!!

  • @BruceSchmidt-mi2wt
    @BruceSchmidt-mi2wt7 ай бұрын

    Worked on my sons 2003 Toyota Highlander BUT used pins 4 and 14. The obd2 plug was oriented the same as yours. VSC LIGHT IS NOW OFF. THANK YOU.

  • @mikeibarra5675
    @mikeibarra56752 жыл бұрын

    Thank you it worked on my 2007 4runner. I tried multiple fixes posted by others in youtube, and I appreciate everyone of them, but only yours worked. thanks

  • @amirkhanahmadzai4963

    @amirkhanahmadzai4963

    8 ай бұрын

    I have 2007 4runner too the slip blinker doesnt blink. Will this will work

  • @mitchell5126
    @mitchell512611 ай бұрын

    So thankful for this video! Worked great on my 2009 RAV4. I replaced my intermediate steering shaft and was a little careless with the wheel position. I got it dialed in driving straight but once I hit 15mph the car would throw on the traction control and try to stop the car lol. Not just the light but literally try to stop it too. I assume I messed up the wheel angle and it thinks I’m trying to turn while going straight. Learned about the steering angle sensor, found this video and boom it fixed it. Thanks for the video!!

  • @Mr_Fix_It

    @Mr_Fix_It

    11 ай бұрын

    Happy to have helped!

  • @andrewcox7179

    @andrewcox7179

    9 ай бұрын

    Dude my highlander did this too! I was like what the heck! I didn't even mess with the brake system. Going to try this fix right now

  • @abbasmuhsen2715

    @abbasmuhsen2715

    9 ай бұрын

    Is it work with Toyota hilux pickup

  • @Mr_Fix_It

    @Mr_Fix_It

    9 ай бұрын

    @@abbasmuhsen2715 yes

  • @Chengocl
    @Chengocl9 ай бұрын

    Worked perfectly on my 2011 Lexus RX350. The light had come on after doing an alignment and really did not feel like driving back to the shop. For anyone trying this on a RX, count the pins starting from the engine towards the drivers seat. Also first short the pins 4 times while on IGNITION ON, turn everything off, and the proceed as in the video.

  • @boblemanski3966
    @boblemanski396610 ай бұрын

    definitely worth the $10 tip I was going to give the alignment tech IF he took the 1 minute to do this. Send me your venmo It will be on the way. THANKS!

  • @Mr_Fix_It

    @Mr_Fix_It

    10 ай бұрын

    @Type-Ry

  • @boblemanski3966

    @boblemanski3966

    10 ай бұрын

    sent. thanks again!@@Mr_Fix_It

  • @MrMrsregor

    @MrMrsregor

    4 ай бұрын

    a good alignment tech would have done this as part of the job

  • @BigDipper79
    @BigDipper793 ай бұрын

    Thank you so much!!

  • @chotuusian4127
    @chotuusian4127 Жыл бұрын

    Good work

  • @Emretto
    @Emretto Жыл бұрын

    Interesting. I’ll try it on Verso ez 2011. I will thank to you later if it works 😂

  • @doitmyway9089
    @doitmyway90892 жыл бұрын

    Just subscribed. Do you know if this will work with a ford thanks

  • @eldabo1000
    @eldabo10002 жыл бұрын

    Just had the same problem with mine took it back to the alignment shop they put the scan tool on it and recenter my steering angle finder all is good

  • @topmonkey6512

    @topmonkey6512

    Жыл бұрын

    Hello, you can take a look at this function I made with the comprehensive diagnostic equipment: kzread.info/dash/bejne/lKd129yMqcSrgMY.html.

  • @tetnia
    @tetnia10 ай бұрын

    This hack is working for Mercedes C230 kompressor sport coupe W203, 2005?

  • @sarulraj
    @sarulraj Жыл бұрын

    I tried it on my Alphard ANM10 2008 model and nothing happened. Did I miss something?

  • @thisthatwhatsup-mh3hq
    @thisthatwhatsup-mh3hq5 ай бұрын

    Can you do this procedure with a 2008 Buick lucerne, 3.8 engine?

  • @bensabee
    @bensabee Жыл бұрын

    Is it 5 from the passenger side or driver side? This is for a 2016 Toyota Corolla. On yours, the wide part of the trapezoid (obd) is towards the engine and on the Corolla, it’s closer to the driver. Does this make a difference??

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Yes it makes a difference. You may blow a fuse if not done correctly. Just pause the video to about 1:58 and match your port to mines. Some ports are upside down/ right side up. Hope this helps.

  • @christopher23.
    @christopher23. Жыл бұрын

    Will this work for code c1336 and c1203?

  • @amirkhanahmadzai4963
    @amirkhanahmadzai49638 ай бұрын

    2007 4runner v6 my anti skid lighting isnt flashing anymore. Whould this method fix the problem??

  • @JaiPrakash-bd2xt
    @JaiPrakash-bd2xt Жыл бұрын

    Its all car universal formula or only in Toyota?

  • @walterjonz
    @walterjonz Жыл бұрын

    will it work in 1gdftv hilux, fortuner or innova, skid light on dash appears have it check but the shop suggested for steering angle replacement, this appears after front wheel alignment

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Sorry we don’t have those cars here in the US but the Hilux should work. The other two I am not sure.

  • @Kxji
    @Kxji Жыл бұрын

    This happened after an alignment on a 2013 RAV4 will it work? I might as well try it.

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Yes it will work. You can thank me later. 🤣

  • @terrancecollins2696
    @terrancecollins26962 жыл бұрын

    My Lexus ISF is doing this after alignment … do you think this trick will work on it? I have no traction control and the weather is getting bad lol

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    Yes it should work. As long as you cross the correct pins it will reset your system.

  • @spikey9azn6

    @spikey9azn6

    2 жыл бұрын

    Did you try this? My rc F has the same. I wonder if the pins are the same corresponding from this to the lexus rc f

  • @terrancecollins2696

    @terrancecollins2696

    2 жыл бұрын

    @@spikey9azn6 haven’t tried it yet, weather has been really good where I live so I haven’t felt the need

  • @TheShakir98

    @TheShakir98

    2 жыл бұрын

    @@spikey9azn6 I tried and it works on my SC430 but for some reason it comes back fast

  • @olusanyaadeyinka2965
    @olusanyaadeyinka29654 ай бұрын

    Will this work on 2017 camry? I have been seeing videos talking about finding TG and CG on the obd but nothing helpful

  • @Mr_Fix_It

    @Mr_Fix_It

    4 ай бұрын

    Yes it should work

  • @deankay4434
    @deankay44342 жыл бұрын

    The shop should have done this! Send them a bill. Another reason to go to the dealer. OVD-II pins 4,5 are grounds, 16 is B+, pin 1 is UART, pin 2 is class-2 serial data, GM used pins 12 & 16 but these are open to manufacturers. Check with the dealer as if you set more codes or burn a module or computer who pays? DK ASE master tech since 78 ACDelco instructor UTI instructor, retired!

  • @ScottElblein
    @ScottElblein2 жыл бұрын

    Any idea which pins to use on a 2008 Saturn Vue?

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    No, I’m sorry.

  • @user-kw2ti5mi9o
    @user-kw2ti5mi9o2 жыл бұрын

    السلام عليكم كيف نعيد ظبط مستشعر سيارة سنتافي ٢٠١٢ مثل هاي الطريقه

  • @DellyDell1
    @DellyDell16 ай бұрын

    Would this work on a 2015 frs I did change my steering wheel, but the clockspring is literally fine and centered at the top

  • @Mr_Fix_It

    @Mr_Fix_It

    6 ай бұрын

    Yes it should.

  • @JWReynolds96
    @JWReynolds965 ай бұрын

    I just replaced the clock spring in my 2015 Tacoma. I accidentally twisted the steering angle sensor and did my best to return it to the original position but now my slip indicator light is on solid. I tried another guide on tacomaworld to do this, but that one indicated using the 4th pins from the right. Any harm in trying this? Will this fix the issue?

  • @Mr_Fix_It

    @Mr_Fix_It

    5 ай бұрын

    No harm, I’ve put it in 4th pin on accident before and nothing happened. To confirm that the reset is taking place all the lights have to be flashing. Hope this helps

  • @marjuneestoque7470
    @marjuneestoque747010 ай бұрын

    Is this applicable to my toyota vios 2019 model?after i replace my rack and pinion assembly traction control light indicator shows.

  • @Mr_Fix_It

    @Mr_Fix_It

    10 ай бұрын

    Yes

  • @stunepiusok

    @stunepiusok

    7 ай бұрын

    Any updates?

  • @talsamiya9480
    @talsamiya94802 жыл бұрын

    I tried this and it never helped, my kdss light just came on instead, what can I do to get rid of kdss light

  • @blacsuperman4491
    @blacsuperman44912 жыл бұрын

    Can I do this trick which is awesome by the way with my 2011 Kia Optima

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    Unfortunately it is for Toyota/Lexus only.

  • @topmonkey6512

    @topmonkey6512

    Жыл бұрын

    Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for Kia cars: kzread.info/dash/bejne/lKd129yMqcSrgMY.html.

  • @joejoejoejoejoejoej
    @joejoejoejoejoejoej7 ай бұрын

    What pins are strapped for the right hand drive models please?

  • @Mr_Fix_It

    @Mr_Fix_It

    7 ай бұрын

    I’m not sure. Just pause the video or screenshot it and match it up to your OBD port. Hope that helps.

  • @y0faceNasty
    @y0faceNasty2 жыл бұрын

    Would this work for a 2015 Toyota 4Runner SR5 model?

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    Yes it should work.

  • @ronniepasion991

    @ronniepasion991

    Жыл бұрын

    If zero is not done will atrac, mts n cc still work?

  • @topmonkey6512

    @topmonkey6512

    Жыл бұрын

    Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for VW: kzread.info/dash/bejne/i4mtybt-c6nZnag.html .

  • @rohansofra2629
    @rohansofra26298 ай бұрын

    Your door light stays on?

  • @anhuaro
    @anhuaro5 ай бұрын

    Hi buddy, does it work for any Toyota car? For Yaris 2015 too?

  • @Mr_Fix_It

    @Mr_Fix_It

    5 ай бұрын

    Yes it should work

  • @franciscochavez8856
    @franciscochavez8856 Жыл бұрын

    Will this work on a 2021 tacoma?

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Yes it should.

  • @juliustay2541
    @juliustay2541 Жыл бұрын

    My Toyota Rav4 2004 VSC TRAC warning light doesn't come on dashboard when ignition is turned ON. Any help?

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Check your fuses maybe you blow a fuse.

  • @juliustay2541

    @juliustay2541

    Жыл бұрын

    @@Mr_Fix_It will check them out

  • @azmimasian4625
    @azmimasian4625Ай бұрын

    All car same?

  • @graveshaker
    @graveshaker11 ай бұрын

    Will this work on 2010 fj cruiser?

  • @Mr_Fix_It

    @Mr_Fix_It

    11 ай бұрын

    Yes

  • @JaiPrakash-bd2xt
    @JaiPrakash-bd2xt Жыл бұрын

    Newly changed steering unit include motor and torque sensor.But the problem is one side hard another side soft.if any solution this?

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Sounds like you have an issue with your rack and pinion.

  • @JaiPrakash-bd2xt

    @JaiPrakash-bd2xt

    Жыл бұрын

    @@Mr_Fix_It If turn steering one side smoothly turn but another side too hard its any torque sensor angle position problem?

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    @@JaiPrakash-bd2xt I don’t think so, they would just give you warning lights sounds like a mechanic issue. Something is broken internally or bent. You need to lift the car up and have some turn the wheels while you look to see if anything is rubbing.

  • @etorres7447
    @etorres7447Ай бұрын

    Will this work on a 2014 scion tc?

  • @Mr_Fix_It

    @Mr_Fix_It

    Ай бұрын

    Yes

  • @chiefnoob8776
    @chiefnoob87762 жыл бұрын

    Do you know if it will work for a 2006 Toyota RAV4?

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    Sorry for the delayed reply, but yes it should!

  • @topmonkey6512

    @topmonkey6512

    Жыл бұрын

    Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for VW: kzread.info/dash/bejne/i4mtybt-c6nZnag.html .

  • @kevinstatton126
    @kevinstatton1262 жыл бұрын

    can you do the same on a 2008 Dodge durango

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    It’s more for Toyotas I don’t think it would work on American cars.

  • @khalidmahmod2812
    @khalidmahmod28122 жыл бұрын

    Is the same pins on 2005 sienna?

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    Yes, it should be the same.

  • @ahyeong98
    @ahyeong9810 ай бұрын

    hi,on my corolla the vsc didnt blink but the anti-ski logo is blinking and beeping while i turning the steering wheel,the light not always came out but only sometime. can this method done on my corolla?

  • @Mr_Fix_It

    @Mr_Fix_It

    10 ай бұрын

    Yes but sounds like you have a bad ABS sensor or alignment issues that need to be addressed first.

  • @ahyeong98

    @ahyeong98

    10 ай бұрын

    @@Mr_Fix_It what is ABS sensor? is it speed sensor?

  • @Mr_Fix_It

    @Mr_Fix_It

    10 ай бұрын

    @@ahyeong98 yes speed sensor.

  • @ahyeong98

    @ahyeong98

    10 ай бұрын

    @@Mr_Fix_It alright,ill try check those problems. Thanks mate. much appreciate

  • @rakpe
    @rakpe2 жыл бұрын

    Does this work on other cars as well? Like Fords?

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    No this is for Toyota, Lexus and Scion only.

  • @rakpe

    @rakpe

    2 жыл бұрын

    @@Mr_Fix_It tnx for answering

  • @mobilemechanics8574
    @mobilemechanics8574 Жыл бұрын

    Hi mr can i do this on ford ranger xlt or toyota mark x

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Only on Toyota and Lexus

  • @rendiimanuel5161
    @rendiimanuel516111 ай бұрын

    Does it work for nissan or only toyota? Please answer..thanks

  • @Mr_Fix_It

    @Mr_Fix_It

    11 ай бұрын

    No, Nissan. Only Toyota

  • @reeenis
    @reeenis25 күн бұрын

    Does this work on 2013 lexus rx450h?

  • @Mr_Fix_It

    @Mr_Fix_It

    25 күн бұрын

    Yes

  • @jpbates1981
    @jpbates1981 Жыл бұрын

    Will this work on all cars or just toyoyas

  • @Mr_Fix_It

    @Mr_Fix_It

    11 ай бұрын

    Only Toyota’s

  • @ipchilo
    @ipchilo10 ай бұрын

    Can it work for 2007 lexus es 350

  • @Mr_Fix_It

    @Mr_Fix_It

    10 ай бұрын

    Yes

  • @christopher23.
    @christopher23. Жыл бұрын

    Will this help with my rav4 code c1203 and c1336 code?

  • @christopher23.

    @christopher23.

    Жыл бұрын

    I just did this and it reset it. I had my brake light on,traction Control,and abs light. With codes listed codes above. Hope they stay off. Thank you.

  • @christopher23.

    @christopher23.

    Жыл бұрын

    14 Rav4

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    @@christopher23. I’m glad it worked for you!

  • @oci464
    @oci4643 ай бұрын

    Work on fj cruiser too?

  • @Mr_Fix_It

    @Mr_Fix_It

    3 ай бұрын

    Yes

  • @hazem683
    @hazem6838 ай бұрын

    Can I apply it to my car Avanti 2007 Korea?

  • @Mr_Fix_It

    @Mr_Fix_It

    8 ай бұрын

    No

  • @tedwu9354
    @tedwu9354 Жыл бұрын

    What does shorting out both pins do? VSC light is not on. Anti-skid light is flashing and beeping when I turn my steering wheel on highway. Does this calibration fix this problem?

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Shorting both the pins is pretty much reseting the whole system. You may have a alignment issue or a bent suspension part. I would address the issue and get the alignment first then do the reset.

  • @tedwu9354

    @tedwu9354

    Жыл бұрын

    @@Mr_Fix_It Ok. Thank you for responding so quickly.

  • @m.n.3490

    @m.n.3490

    8 ай бұрын

    @@Mr_Fix_It Do you mean that 'shorting these pins' is the same as clearing ALL codes with an OBD2 tool/reader? And, if jumping these pins ONLY clears codes - why is this also called a 'CALIBRATION'? I have 3 warnings showing in my instrument cluster (on my 2008 RX350): - ABS, - VSC OFF(flashing), and, - traction control symbol (car with swervy lines behind it). They just all came on after a gas fill up, I think! I also have several codes including: - U0073 (ABS bus communication off), - C0205 (front speed sensor LH circuit), and - U0126 (lost communication with steering angle module). I cleaned the front left ABS speed sensor - it did have some metal clinging to it. So, now I'm wondering what to do next. I drove the car for 10 minutes - ABS light stays on. Should I use your jump the pins to re calibrate steering angle? (which may reset ALL codes?) And then should I clear all the codes with the OBD2 scanner? I also have these codes. Might they all be coming due to ABS error code?: U0123, C1223, U0124 (replace YAW rate sensor) C2122 What do you suggest I work on next? (THANKS for any help you would offer!)

  • @Mr_Fix_It

    @Mr_Fix_It

    8 ай бұрын

    @@m.n.3490 Sounds like you have a bad ABS/wheel sensor. I would replace it and clear all codes with a scanner. You can get a speed sensor on Rockauto.com. They probably have the best pricing on auto parts .

  • @m.n.3490

    @m.n.3490

    8 ай бұрын

    @@Mr_Fix_It (I thought I replied, looks like I did not ...) So,I did look at the sensor, and there was a lot of metal shavings sticking to it. I cleaned it off, thinking the metal shavings was messing up the sensor readings. The sensor line looked good, not cuts or scrapes. I dd not test the sensor line for resistance as I could not find my meter. What I am not clear on. is, if cleaning the sensor worked, would the ABS light go off after driving the car for a few miles all by itself? Or, would I need to clear the ABS light, drive a few miles, and see if the ABS warning light comes back on? Since I have so many codes, I'm not sure if they are related to each other in any way. Ex: Like with the BS code of U0073 (control module communic BUS off) and C0205 (Front speed sensor LH circuit). Would cleaning the sensor (or replacing with a new sensor) turn off both U0073 and C0205? Do both need to turn off to clear the ABS light being on? And do any of the other warning lights relate to ABS? For example do the VSC OFF, or TRAC (swerving car symbol) light up due to ABS light? DO they have their related codes? Man, this is complicated stuff.

  • @kirkout7366
    @kirkout73665 ай бұрын

    Have you reset on on a Jeep JK?

  • @Mr_Fix_It

    @Mr_Fix_It

    5 ай бұрын

    No, only Toyota/Lexus.

  • @blyat4842
    @blyat48426 ай бұрын

    Think this will work on the 2022 Sienna?

  • @Mr_Fix_It

    @Mr_Fix_It

    6 ай бұрын

    I think it should.

  • @blyat4842

    @blyat4842

    6 ай бұрын

    Can't be any type of metal correct

  • @Mr_Fix_It

    @Mr_Fix_It

    6 ай бұрын

    Just not aluminum. You can use a magnet, if it sticks to the magnet you can use it.

  • @izzogenious
    @izzogenious4 ай бұрын

    i have cod p1589 on my vitz 2005 can this method help to solve my problem??

  • @Mr_Fix_It

    @Mr_Fix_It

    4 ай бұрын

    As long as it’s a Toyota. Yes.

  • @izzogenious

    @izzogenious

    4 ай бұрын

    @@Mr_Fix_It i tried but dnt work for me

  • @Mr_Fix_It

    @Mr_Fix_It

    4 ай бұрын

    @@izzogenious you have a bad sensor my friend you need to replace it. You need to fix your problem first. My procedure is for resetting after fixing the problem.

  • @izzogenious

    @izzogenious

    4 ай бұрын

    @@Mr_Fix_It acceleration sensor learning value i tried another sensor still the same

  • @richardnunez5407
    @richardnunez54079 ай бұрын

    Will this work on my 2015 camry bro

  • @Mr_Fix_It

    @Mr_Fix_It

    9 ай бұрын

    Yes

  • @richardnunez5407

    @richardnunez5407

    9 ай бұрын

    @@Mr_Fix_It awesome thanks 🤙🏾

  • @olusanyaadeyinka2965

    @olusanyaadeyinka2965

    4 ай бұрын

    @@richardnunez5407did it work for your 2015 camry?

  • @MiguelGarcia-jl3bu
    @MiguelGarcia-jl3bu9 ай бұрын

    This work on. A Highlander hybrid? Same year

  • @Mr_Fix_It

    @Mr_Fix_It

    9 ай бұрын

    Yes

  • @MiguelGarcia-jl3bu

    @MiguelGarcia-jl3bu

    9 ай бұрын

    @@Mr_Fix_It my vehicle is in an accident and have not been able to get power steering to work has an electric rack and pinion and a friend of mine has a scanner but we can never get it back to zero point

  • @MiguelGarcia-jl3bu

    @MiguelGarcia-jl3bu

    9 ай бұрын

    @@Mr_Fix_It my power steering is still not working steering wheel it hard to move is there something else I need to do?

  • @Mr_Fix_It

    @Mr_Fix_It

    9 ай бұрын

    @@MiguelGarcia-jl3bu You have an issue you need to fix before you can do a reset. Your rack n pinion is electric so check your battery voltage and your fuses and relays. Unless the car has been in a accident then it could have internal damage and may need to be replaced.

  • @MiguelGarcia-jl3bu

    @MiguelGarcia-jl3bu

    9 ай бұрын

    @@Mr_Fix_It I appreciate you replying back to me and yes, I have replace the rack and pinion it was used but off of a running vehicle and picking up another rack today and the yaw rate sensor. Someone told me that has something to do with the suspension and alignment components for the vehicle. It was in an accident, I replaced everything as far as suspension

  • @abdelazizsqualli1004
    @abdelazizsqualli100411 ай бұрын

    started right up and was ready to cut....

  • @user-cl4vx9uq6d
    @user-cl4vx9uq6d11 ай бұрын

    Is this work for bmw 528i

  • @Mr_Fix_It

    @Mr_Fix_It

    11 ай бұрын

    No

  • @hardytall8386
    @hardytall8386 Жыл бұрын

    Can it work for Lexus is 250

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Yes it should work.

  • @hardytall8386

    @hardytall8386

    Жыл бұрын

    @@Mr_Fix_It thanks I will try on my is250 always got that problem

  • @jdl1989
    @jdl1989Ай бұрын

    The haneys manual says 5 pin top 4th pin bottom

  • @Mr_Fix_It

    @Mr_Fix_It

    Ай бұрын

    Depends on the position of the OBD port, some cars it’s flipped, like car in the video.

  • @kingpower4490
    @kingpower44909 ай бұрын

    Can this work on RAM 1500?

  • @Mr_Fix_It

    @Mr_Fix_It

    9 ай бұрын

    No Toyota’s ONLY.

  • @halenpeterson2322
    @halenpeterson23224 ай бұрын

    2005 highlander?

  • @Mr_Fix_It

    @Mr_Fix_It

    4 ай бұрын

    Yes

  • @Izchapito
    @Izchapito2 жыл бұрын

    can work for subaru brz?

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    No I don’t think so. You will probably blow a fuse

  • @Izchapito

    @Izchapito

    2 жыл бұрын

    @@Mr_Fix_It can work on toyota gt86? toyota gt86 & BRZ have same system.

  • @Izchapito

    @Izchapito

    2 жыл бұрын

    what fuse probably blow?

  • @ehayes713
    @ehayes713 Жыл бұрын

    2006 malibu Ltz?????

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    No this is for Toyota’s. Sorry.

  • @elmafiaa2660
    @elmafiaa2660 Жыл бұрын

    came out after alighnment of our 2013 Corolla, they fucked up... Break Masters lol

  • @m.n.3490
    @m.n.34908 ай бұрын

    So, I saw another video on recalibrating the steering angle, but, it looks like they used different pins, since the DLC3 is oriented 180 degrees differently than yours. You seem to be using different pins? In YOUR video the pins used look like: // o o o X o o o o \\. // o o o X o o o o \\ In OTHER video pins used look like: \\ o o o o X o o o //. \\ o o o o X o o o // The other video said to use pins 4 and 12 (where 4 = TS, and 12 = CG) I have a diagram on my google photos, but, when I tried to post a link here, KZread deleted my comment. Anyways, which instruction should I use? Are you sure you put the paper clip in the correct pins in your DLC3 (OBD2) port?

  • @Mr_Fix_It

    @Mr_Fix_It

    8 ай бұрын

    The OBD port is in different positions in different cars. As long as your car is a Toyota or Lexus or Scion, line up your paper clip like in my video and you should be able to do the reset.

  • @m.n.3490

    @m.n.3490

    8 ай бұрын

    Thanks for your reply. Ooops, I messed up the diagram above. (Was getting sleepy, lol). Anyways, what I meant to say was that in the other video, as well as another forum, they said to use pins 4 and 12 (where 4 = CG, Chasis Ground, and 12 = TS, Brake Actuator Assy). 16 13 9 ============ In YOUR video the pins used look like: // o o o X o o o o \\. // o o o X o o o o \\ =================== 8 7 6 5 4 3 2 1 (which is pins 5 & 13 where 5 = SGND, and 13 = TC) 16 12 9 ============ In OTHER video the pins used look like: // o o o o X o o o \\. // o o o o X o o o \\ =================== 8 7 6 5 4 3 2 1 (which is pins 4 and 12 (4 = TS, and 12 = CG,)

  • @ranveersinghrandhawa9387
    @ranveersinghrandhawa93872 жыл бұрын

    Hey bud can it done on Kia

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    I don’t think so, this trick is more for Toyota, Lexus and Scion.

  • @spikey9azn6

    @spikey9azn6

    2 жыл бұрын

    @@Mr_Fix_It you think itll work for a new lexus? 2015 lexus rcF? Same pin placement?

  • @Mr_Fix_It

    @Mr_Fix_It

    2 жыл бұрын

    @@spikey9azn6 yes sir, it should work. Worst thing that can happen is you blow a fuse.

  • @topmonkey6512

    @topmonkey6512

    Жыл бұрын

    Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for Kia cars: kzread.info/dash/bejne/lKd129yMqcSrgMY.html.

  • @jasonbeasley8573
    @jasonbeasley8573 Жыл бұрын

    Doesn't work on a 2015 Sienna

  • @phemmyo5146
    @phemmyo514611 ай бұрын

    mine went out by itsef....... turning steering all de way to de right and left den middle. hope it stay off. car was stolen and crashed by an idiot.

  • @dell7054
    @dell70542 ай бұрын

    2011 sienna did not work

  • @Mr_Fix_It

    @Mr_Fix_It

    2 ай бұрын

    That message something is still wrong. Put a OBD scanner on and see if there are any codes. Maybe a bad ABS/speed sensor. Also just be your alignment is still off. Hope this helps.

  • @alessandro831
    @alessandro831Ай бұрын

    Take the damn key out!

  • @dennishickmaniii3672
    @dennishickmaniii3672 Жыл бұрын

    Maybe I’m the only one who can’t get passed the stupid bell chiming but seriously people how can you make a video and expect people to sit and listen when you have the door open chime going off the entire time???

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    Yes actually the door needs to be open for me to access the OBD port and the ignition on for the reset. I’m glad you can find something negative from something that is useful and free for some people.

  • @dennishickmaniii3672

    @dennishickmaniii3672

    Жыл бұрын

    @@Mr_Fix_It If you're going to publically put yourself and your videos out on the largest video platform that exists on planet Earth, don't get your feelings hurt when someone addresses a legitimate issue they may have with the "quality" of one of those videos. I lost around 75% of my hearing in BOTH of my ears from a horrific accident in 2018 and have to wear hearing amplifiers and the sound coming from the chime in your video makes both of those amplifiers hit a high pitch and then the sound cracks. Have you ever heard the sound a microphone makes when it gets too close to the speaker that it's connected to? That's the same sound I get to hear when watching this video. This video was neither useful nor free for me. Also, if you would've turned the key to the "on" position instead of having it on "accessory," you'd noticed that the chime would've gone away.

  • @nelsontoranza1016

    @nelsontoranza1016

    Жыл бұрын

    @@dennishickmaniii3672 If you can't hear this sound, how would you do it live? This sound is in the van, do you have one? There's no need to behave like that when he's helping. There are much worse sounds on this platform. Regards.

  • @user-kz2pj2xi1l
    @user-kz2pj2xi1l Жыл бұрын

    Mitsubishi Lancer is also possible? There are three error codes: C1290, C1219, and C2205, but the code cannot be deleted even with a scanner, and the alarm continues to ring even when driving.

  • @Mr_Fix_It

    @Mr_Fix_It

    Жыл бұрын

    No this is for Toyota cars

Келесі