THANK YOU!!!! I've seen this solution before, but NO ONE would talk about WHY they were doing it!!! My 2014 was definitely FIGHTING ME on LEFT TURNS at 35-40MPH.... THANK YOU!!!!!!

@ShawnMartinNCBIRDMAN

Ай бұрын

@gomez619 I saw what you saw...people chasing phantom issues looking at faulty ABS systems and wheel speed sensors. YOU'RE WELCOME!!

Awesome and useful video! My truck was driving me nuts with it wanting to go into the other lane when turning with 35s. I just did the reset so hopefully it will work for me as well haha. Thanks!

@ShawnMartinNCBIRDMAN

Күн бұрын

@nickstavrakis I hope so too! Took me a few times going around sharper corners not to tense up even after this fixed it!! Lol!!

Works for 2004 Lexus GX470! Excellent!!

@ShawnMartinNCBIRDMAN

2 ай бұрын

@tomfrancisco4487 it would be nice to have a full list of all the Toyota models and years this works with!

Faaaakin beauuuty she worked first go bud !! Thanks eh!

@ShawnMartinNCBIRDMAN

7 ай бұрын

@victorziebenhaus3229 heck yeah that's awesome, no problem!!

Thank you ❤

@ShawnMartinNCBIRDMAN

Ай бұрын

@giopirmisashvili5514 you're welcome!

Thanks

@ShawnMartinNCBIRDMAN

Ай бұрын

@hamishlovesit4731 you're welcome!!

Hey have this same problem with my 2006 Toyota 4 runner. Whenever I take a hard right or left or even on the same turn you took in the mountains it does the same thing where it brakes while I turn. We tried to replace the entire front and back abs wiring system and that didn’t work. Been trying to figure it out. Will try this out to see if it fixes my problem. Any suggestions?

@ShawnMartinNCBIRDMAN

10 күн бұрын

@chrisavent8012 someone else replied and said this worked for their 4Runner. Even if you asked a dealership to do the VSC reset for you, it would be worth it. Sucks all the suspension work was done. I guess it's all new now but maybe not needed.

@chrisavent8012

10 күн бұрын

@@ShawnMartinNCBIRDMAN we had it zero calibrated bc I have a 3 in lift but it still makes that noise and brakes when turning.

This is exactly what my 2012 Tundra is doing. Do you know if this works on Tundra as well?

@ShawnMartinNCBIRDMAN

Ай бұрын

@cliffordebel2977 I am not aware if it does or not.

What does recalibrating actually do? Why does it stop the truck from locking up in the future?

@ShawnMartinNCBIRDMAN

11 ай бұрын

@dizzle215 I mention it in the video, but Toyota programs parameters in the vehicle to check to make sure that the stability of the vehicle is solid, more than likely as in centered based on sensors in the vehicle. I'm not sure if they are like a gyroscope or what, but these relay information to the vehicle that the stability has been compromised and it tries to regain control by stopping the vehicle. For instance if you were off road and these parameters changed suddenly, the vehicle would try to stop so that whatever hazzard you were facing would be minimalized. I'd have to dig deeper to see what the parameters are if anyone knows, but since I had the exact symptoms mentioned in the Tacomaworld writeup and doing the reset fixed my issue, I left well enough alone. Thanks for the reply.

@dizzle215

10 ай бұрын

Thank you so much! I followed the steps in your video and everything matched up perfectly. I had this issue with the steering wheel sort of locking uo going about 60 miles an hour around the corner, so I’m pretty happy to hopefully have addressed it now. Thanks again!

@ShawnMartinNCBIRDMAN

10 ай бұрын

@@dizzle215 that's awesome! Yeah, I found myself taking the same corner with a little hesitancy yesterday, just waiting for it to do it again, but it never did!!

What's the reason for not showing the actual PIN connections with the jumper wire?

@ShawnMartinNCBIRDMAN

21 күн бұрын

@jascam1 are you saying while I'm inserting it in during my count while I'm showing the dash so you can see what happens when the lights change their flashing?

Does this work for a 2015 avalon?

@ShawnMartinNCBIRDMAN

4 ай бұрын

@demarwright2384 I have an 07 Avalon (good choice!) but I am not sure that it'll work. Does the 2015 Avalon have VSC?

My 09 has done this a dozen times. First I thought it was because my trailer was a little heavy but then I was noticing it while not towing anything and like under 40 mph on the highway. I think this should be some kind of safety recall because it's extremely dangerous. It puts you into a skid and your going into the other lane. Always on a right curve and Truck is skidding into traffic. I never felt I was driving to fast and when it was doing it without towing and under 40 there is definitely an issue. Hope your fix will take care of it. I just wonder how many are experiencing this in there Tacoma? Btw my tires are stock.

@ShawnMartinNCBIRDMAN

2 ай бұрын

@johnnycat60 it would be nice to know how many accidents or issues this "safety feature" has caused!

@soullaidbare7737

Ай бұрын

How should that be a safety recall when YOU are changing the OEM suspension dimensions with larger tires or suspension??? It is clearly stated that a VSC reset should be done with an alignment or any changes to the suspension. You make a change to the suspension that causes the truck to not react the way it's supposed to and you want a safety recall??? LOL

@johnnyturbo9227

Ай бұрын

Perty sure I stated in my comment that my truck and tires are stock. Nothing modified

Will this work with a 2019 Tacoma ?

@ShawnMartinNCBIRDMAN

11 ай бұрын

@mileslake6760 the info I've seen says it stayed the same through 2023.

@gregktm

3 ай бұрын

@@ShawnMartinNCBIRDMAN No. 2020 and up don't have the same pins at the obd2 port. You can do it with an advanced scan tool.

@ShawnMartinNCBIRDMAN

3 ай бұрын

Good to know, I'm going to edit the info thanks for the feedback!

@rayphipps1849

3 күн бұрын

I tried it several times on my 2019 Tacoma and it didn't work.