I don't even have a vette yet but I wanna buy one so dam bad 😅

@JReedsLoveofCars

3 жыл бұрын

You’ll love it lol

@beauseph1128

2 жыл бұрын

Same here bro

@ulisesmata5840

2 жыл бұрын

I feel you

@cozyboy7366

2 жыл бұрын

same man same 😭

@adrianmiranda5004

2 жыл бұрын

Buy one!!!

My steps on my LS2 C6 Z51 that I was very happy with: Headers/exhaust & intake together (air in / air out) then got a tune... 50hp gain. Ran that for a while, then put together the money for cam, lifters, ported LS3 heads & another tune... another 85hp gain. While I'm not the baddest thing on the road, it scratched my itch to say I have a 500+ hp Corvette, and it is fun AF to drive. Another mod I HIGHLY recommend if you have a manual is the MGW short-throw shifter... It totally changes the feel of driving the car. On a side note, some of the "while you're in there mods" if you get a cam package... since the front of the engine has to come apart, get the harmonic balancer switched out if you haven't already. Since my heads were coming off, that means the intake manifold came off, so a remote oil pressure sensor was installed as well.

@JReedsLoveofCars

3 жыл бұрын

Those are good suggestions. My goal was 500 too. My next step will be a power adder, which will put me well over that. What tires are you running?

@ChiefMason

Жыл бұрын

What exhaust and intake are you running?

On all of my builds, I've always done headers and intake before the tune so that I can get the most out of that initial $600. After that, everything else is just a small retune fee. Also, I've always installed my headers and intake myself to save a few hundred dollars. That extra money goes to the cam fund. Other than that, your list is pretty much spot on to me

@keymythic6362

Жыл бұрын

Very helpful thanks

J Reed, the best mod is to hold that money and go over the car to see what maintenance is needed and what preventative work you need to do(belts, pulleys, harmonic balancer, cooling system). Too many dudes hopping their cars up only to break down on the first good trip/group drive. Vettes are great cars to modify but better cars when they are properly maintained.

@JReedsLoveofCars

3 жыл бұрын

Maintenance is 101. That goes for any car. This video is about engine mods that most people contemplate on doing to their vettes.

this is like the best mod video ever ! dude is funny af too

I love how the c6 vettes have a great stock muffler. All you need is something to open the valves manually. Also keep in mind used mufflers are a great option. Its just a muffler. If it breaks the car is gonna be fine.

@JReedsLoveofCars

9 ай бұрын

true, if mine would of had the NPP exhaust, I wouldn’t have spent the $$ on a corsa

This guy is great, good advice and funny as hell

@JReedsLoveofCars

3 жыл бұрын

Preciate it!!!! 😀. Thanks for watching!

I’ve had 3 C6’s and a C7Z06, and I couldn’t agree more with this order of things - headers are LIFE CHANGING 🔥🤙🏾🔥

@JReedsLoveofCars

2 жыл бұрын

Yes!!!! Had me smiling for days. I think I posted my first start up years ago when I first first them. Smilin from ear to ear! Lol

I just got a C6 GS and everytime I look at it I love it! I think your advice e is spot on.

@JReedsLoveofCars

Жыл бұрын

Congrats! I can tell ya… that feeling never ends!

Just bought a 2012 c6 lt2 white as well love the car fell in love first sight and drive

Love the video man. Just got a c8 I will follow ur path. James.

Just turned 40 got my C6, thanks for sharing!! Extremely detailed explanation and I appreciate it!’

@JReedsLoveofCars

7 ай бұрын

I appreciate you watching and congrats!!!

Best information video I’ve found on KZread for starting out

@JReedsLoveofCars

2 жыл бұрын

Thanks!!!! I appreciate you watching

I'm on that slow crawl to saving my money for a C6 and in the meantime learning, learning, learning...good stuff!

@JReedsLoveofCars

2 жыл бұрын

That’s basically what I did!! Even when I wgot it and got the bug to mod, I studied mods for a at least two years. That is half the fun for me!

You’re a gem of a human. Thank you

@JReedsLoveofCars

Жыл бұрын

😀😀🙏🏿

Awesome vid, straight facts on every word

@JReedsLoveofCars

2 жыл бұрын

thanks!!

Blunt, and Straight to the point. Good vibes

@JReedsLoveofCars

Жыл бұрын

I appreciate you watching!

Man thanks a lot for giving me a straight to the point video my guy ..

@JReedsLoveofCars

Жыл бұрын

I appreciate you watching!

Sweet video thanks bro

@JReedsLoveofCars

2 жыл бұрын

Thanks for watching!

Interesting video. Kudos.

Super sweet!!! Freakin love it!!!

@JReedsLoveofCars

2 жыл бұрын

Thanks!!!

Good content bruh! Keep it coming. I have a 13' GS with borla headers, x-pipe and borla extreme catback plus a tune. About to switch my Holly intake to a Vararam Snake Charmer. Next will be cams and heads plus another tune.

@JReedsLoveofCars

3 жыл бұрын

I appreciate you watching! That Vararam is supposed to be the best out there. It’s one of the few intakes that is actually a true “cold” air intake. You gone love that cam!!! It never gets old!!!

Great video thanks man!

@JReedsLoveofCars

2 жыл бұрын

Thanks for checking it out!👍🏾

Had me cracking up watching this, thanks for the video and the advice

@JReedsLoveofCars

2 жыл бұрын

😄 I appreciate you watching it!

just found your channel man, love it ! subbed !

@JReedsLoveofCars

2 жыл бұрын

Thanks!!

Headers, X pipe and exhaust complete!

Just got my 2013 C6 yesterday 🙏 can’t wait to slowly build it

@JReedsLoveofCars

2 жыл бұрын

Congrats!

On point brotha 💯

@JReedsLoveofCars

3 жыл бұрын

Preciate it!!! Thanks for watching!

Very smart advice

A cammed LS sounds so good!! Nice video

@JReedsLoveofCars

2 жыл бұрын

Sure does!!!! Thx for watching!!

Great information and great youtube video! Subscribed!

@JReedsLoveofCars

Жыл бұрын

Thanks!!👍🏾

Great video 🤞🏽 gave some good advice

@JReedsLoveofCars

2 жыл бұрын

Appreciate it

Hey Jake. Thanks For the video….. Getting ready to do some Mods and you cleared up in my mind how to go about it. BTW I have a 13 GS with the open close Exchaust. Maybe in your next video you can answer a couple of more questions? Your thoughts on Chips and Some quality brands for Headers Cams Intake Superchargers That you think will provide the best result. Thanks again Jake Well done Bob D

Good info here. I do think a Vararam intake is a decent first mod, and it gives the c6 a nice kick in the higher rpms, but totally agree with skipping or saving it if you're looking for the fastest most noticeable gain for your buck.

@JReedsLoveofCars

3 жыл бұрын

Thanks! I can see that w/a Vararam. It’s one of the few intakes that is truly a cold air intake

I was already thinking of picking up a 6sp c6 I seen the other day this just convinced me even more 😂 Great humor , great advice thank you!

@JReedsLoveofCars

2 жыл бұрын

Nice! They are alot of fun. Thanks for watching!

@YouYou-ho5sj

2 жыл бұрын

@@JReedsLoveofCars I’m 20, just got a c6 z51 and I’m so happy with it! I also got the white one just like you and can’t wait to do some stuff to it eventually. This will help me out a lot. Thank you!

@JReedsLoveofCars

2 жыл бұрын

Congrats!!! They are a blast. I don’t think I will ever sell mine!!! Have fun with it and be safe!!

@YouYou-ho5sj

2 жыл бұрын

@@JReedsLoveofCars I will try. Currently in the shop though because I’m having issues with a heavy gas smell 😣 only happens or is most noticeable when it’s over half a tank of gas Thank you though

Jreed love your videos brother thanks

@JReedsLoveofCars

5 ай бұрын

I appreciate that!

Just found your channel 😮 love your content , great video.

@JReedsLoveofCars

5 ай бұрын

Awesome! Thank you!

Great video!

@JReedsLoveofCars

3 жыл бұрын

Thanks for watching!

I agree with your list with some minor changes. When you do your cam 2 things need to be done #1 LS7 lifters #2 have your stock heads ported. The stock heads will flow just as much as $3500 after market heads after porting and it wont cost you $3500. Head studs is another one because if you go boost later on then they are already installed

Nice video! Made me want to buy headers even more!

@JReedsLoveofCars

3 жыл бұрын

Thanks! You wouldn't regret it.

Really good advice 🎉

@JReedsLoveofCars

Жыл бұрын

Thanks for watching!

Taking my C6 in this Friday to get a Corsa intake and American Racing hedders installed.

You’re funny af 😂😂 I got a 2008 C6 base with just intake and borla muffler from previous owner. Want cams and headers. But got me thinking bout that Nos

@JReedsLoveofCars

Жыл бұрын

Thanks for Watching!! In my humble opinion, get the cams and headers first. You will enjoy that every time you start it up! I haven’t used my nitrous in months!

I like this guy 👍🏻

Kool, thanks for the mods advice in plain layman terms

@JReedsLoveofCars

2 жыл бұрын

No problem! Thanks for watching!!

Bro I like and subscribe off this one video. Man you a trip....Good work

@JReedsLoveofCars

2 жыл бұрын

Thanks for the sub!

Agreed...I did the same thing and added heads while redoing the lifters....heads will add a deeper tone to the car and add little more spice lol...great video

@JReedsLoveofCars

Ай бұрын

For some reason I never upgraded heads! Definitely will though when I decide to build a block! Thanks for watching!

I just bought a 2012 GS, Carbon Flash Metallic with 4k miles. She is being delivered on Friday! I have wanted a Corvette since I was 17 and now...41 years and $45,000's later I have one.. Yehah Ya'll!

@JReedsLoveofCars

2 жыл бұрын

Nice! You're gonna love it. 4K miles??? Can't beat that. Practically a new car.

Really appreciate this video, I’m looking into getting a vette in the near future (C6 Grand Sport). I’m wanting to stick with bolt ons and tune since I’ve always had forced induction cars(Nissan Silvia, BMW 335i). Never had a V8 sports car so wanting that NA response and V8 sound. I’ll def keep this vid in mind when modifying mine, thanks!

@JReedsLoveofCars

Жыл бұрын

Thanks for watching! Sounds like a good plan! It took me awhile to add a power adder (nitrous) and I had a blast NA.

For my C6, I bought a valve axel back set from a C6 Grand Sport and added a Mild to Wild controller kit. That allowed me to make the car quiet for when my wife is riding with me. Next, I added a cold air intake. Then I took the car to the tuner. The tune gained me 40HP to the wheels. My next mod will be Headers. After that, maybe a stage-2 cam on my Automatic Vette.

@JReedsLoveofCars

2 жыл бұрын

Nice!! You gained alot with that exhaust!!

I'm about to get a base c6, thanks for the advice.

@JReedsLoveofCars

2 жыл бұрын

Nice! You'll love it!

Got my 2007 C6 coupe 3 years ago. As I blew by the State Police at about 160mph, still accelerating, receiving my first speeding ticket in 35 years, it dawned on me that just having this car is all the mod I need!😜 BTW . . . The Statie did me a solid and wrote the ticket so that I wouldn't catch a felony reckless driving case. I get all the thrill I need by just standing on it like being shot off a carrier deck. Jus' sayin' . . . Subbed

@JReedsLoveofCars

Жыл бұрын

🤣🤣 So far I haven’t been caught but I rarely open up on the streets any way. It’s a blast when I do though!! Lol. thx for the sub!

My c6 is currently in the shop for a HCI installation I cant wait :)

@JReedsLoveofCars

2 жыл бұрын

Gonna love it!!! It still makes me smile!

pretty sure this guy just convinced me to get a cam

New sub!

@JReedsLoveofCars

11 ай бұрын

👊🏾

The first thing I did to my C5 was put a borla cat-back. Next, I bought an RPM stage two rear end geared 3.42. I selected the RPM rear end as I was planning for a 500+ wheel HP through an automatic A4 trans. Next came the RPM stage 1 L460e trans and the A&A vortex V3si supercharger. A bullet proof combo. I never installed headers or cam. Car made 472 wheel HP with 443 ft/lbs through the L460e trans. I left the stock torque converter in the driveline to lessen traction issues. Next came full poly bushings with custom springs through VBP out of Florida. Hawk brake pads helped get the car stopped. The car would knock out zero to 60 in under 4 seconds. The second gear shift was brutal and would light the tires to the point I would sometimes reduce throttle input while manually shifting to second gear. I increased wheel widths to run a 275 Nitto in front and a 325 nitto in the rear. Have to go aftermarket wheels as C6Z wheels won’t clear the rear suspension. That car was a convertible and a blast to drive. I now have a 07 C6Z06. There is some video of the C5 on my channel messing around. Video before & after supercharging.

@JReedsLoveofCars

2 жыл бұрын

Nice! Sounds like you had a well thought out plan. I would love stick an A&A on mine or at least some nitrous. One of the two will be next!!

@motorgearhead

2 жыл бұрын

@@JReedsLoveofCars - A&A corvette makes a great kit.

Good video bro, just got the M6 c6 grandsport im pretty much following the same plan.

@JReedsLoveofCars

7 ай бұрын

Thx!!! I wish I had a M6!!

@y0ungtchalla420

7 ай бұрын

@JReedsLoveofCars man I got lucky it was hard to find! Seems to be only a few for sale whoever has them are holding on to them. What cam did you go with ?

@JReedsLoveofCars

7 ай бұрын

@y0ungtchalla420 100%!! It’s a custom grind from a local shop. essentially like a stage III. I don’t remember the specs

I don’t listen to the radio just my motor. You knew this is a trustworthy source 👍🏻

@JReedsLoveofCars

2 жыл бұрын

😀😀😀

Holy crap…. Cracking me up

I had a Billy Boat exhaust that was LOUD as hell...drone for days too..but I loved it!!

@JReedsLoveofCars

2 жыл бұрын

I love my extreme!

#1 Wheels #2 Headers #3 Electric exhaust cutouts #4 Flex Fuel kit #5 Torque Converter #6 Cam That’s going to be my route for my daily C6 that i just got :D

@JReedsLoveofCars

3 жыл бұрын

Cool! You’ll save alot of $$ with the cutouts and it gives you options!!! Hopefully I will have my converter installed in a couple of weeks. That’s definitely the better route to take before a cam. In my situation, I had been wanting a cam forever!!!!! No way I could wait any longer. For practical purposes, the converter should come before it, if you plan on racing.

@rgvdaily8000

3 жыл бұрын

@@JReedsLoveofCars yeah i hear ya, I was thinking of just getting a stage 2 cam to get the vette chopping ASAP but I knew I would regret it later on so, I’ll just save up and get the better setup

I’m buying a GS C6 to be loud, not to be quiet for sure. Gained a sub homie sweet ride !!!

@JReedsLoveofCars

6 ай бұрын

Appreciate it!!

Nice video 👌👌

@JReedsLoveofCars

3 жыл бұрын

Thanks!!!

My first upgrades were new Michelin PS4s tires and Bilstein sport shocks which really did make a big difference (runflats suck!). I've got a '12 base C6 with a 6MT and if you put it in competition mode with the traction control off it has a good amount of power just stock and I think maybe another 50-100whp would be perfect for me.

@JReedsLoveofCars

2 жыл бұрын

Nice!! A MT will feel way better than a stock A6 and quicker from a dig. I didn’t realize how bad my run flats were until I bought new tires

Broooooooo 11:16 has me rolling !! Subscribed just because of that alone lmao

@JReedsLoveofCars

2 жыл бұрын

😁. My man! Preciate it!!

Good video!!

@JReedsLoveofCars

2 жыл бұрын

Thanks for watching!

@joshuawilliams6321

2 жыл бұрын

@@JReedsLoveofCars thanks for the information. I’m shopping for my first corvette now.

@JReedsLoveofCars

2 жыл бұрын

No problem! Good luck on your search!

That fox body 😍

I agree on holding off on the supercharger. Smiles per gallon is more important to me than power I won’t be able to use on the streets. I daily my c6, I live between 2 police stations. It’s dumb to do stuff on the streets anyways. I’d much rather drive around low and slow, chopping it up around town, scaring people with some crackle. Love the video brotha, great insight

@JReedsLoveofCars

Жыл бұрын

100%!!! Thanks for watching!

Great video! Thanks for the tips. I just got a C5 and now I’m hooked.

@JReedsLoveofCars

3 жыл бұрын

Thanks for watching!!! I so want a c5! Those make great road racing cars

"tuner was giving you a handjob at the same time" lmaooo thanks for the vid bro solid info. I'm seriously researching C6 right now

Good videos. Your funny too

@JReedsLoveofCars

2 жыл бұрын

👍🏾. Preciate it and thanks for checking it

Great video! I’m looking into getting a Grand Sport. I want to do ARH headers, Corsa Sport exhaust, Halltech cold air intake, and a tune. I’m torn between keeping the NPP and doing the Corsa sport. I love the sound of Corsa systems, but with the headers, I’m worried about making my neighbors hate me.

@JReedsLoveofCars

Жыл бұрын

Thank you! If you have NPP, I would stick with that; especially if you're looking at the Corsa Sport. It will probably be about the same. I usually start mine up with the garage door down in the mornings. Other than that, they will get over it. Having said that, one of my neighbors has a 1500hp Z06 and another neighbor has a straight piped hellcat so I'm actually the reasonable guy. LOL

Great video. I think this will help a lot of the new owners. I have a base C6 and have done the following in this order: 1) Borla Atak 2) Kooks Long Tube headers 3) Holley InTech CAI 4) Tune 5) Pedal Commander 6) Translucent top (exterior mod) I want to put a Cam on it mainly due to the way the cammed Vettes sound. I know I will have to get it retuned but I am fine with that. Where did you get your Cam installed at?

@JReedsLoveofCars

3 жыл бұрын

Nice setup! That’s a good order of mods. I got it installed/tuned at 21st Century Muscle Cars. The main reason I got it cammed was for the sound. The power gain was an added bonus. Mine required 2 tunes as well. I think it was two years later I got it cammed. Thanks for watching!!!

As far as exhaust goes, I found that if you get them straight piped all the way until the muffler (so cut the cats and everything besides the muffler itself) that your car will still have more power and roar! You can also get mufflers that don’t inhibit as much as others. That way you still get performance sound and power but it’s not so loud that you can’t hear yourself. Drone sounds cool but if you drive it a lot it will grow to bother you, and good luck keeping a woman in the passenger seat lol.

Currently saving for a 2010 to 2013 Vette C6. Just patiently waiting to see a great deal on one with decent low miles. Will be back when i make that purchase months down the road!

@JReedsLoveofCars

2 жыл бұрын

Good luck on your search!

@antoniocoleman8380

2 жыл бұрын

Anything ?

@killer77366

2 жыл бұрын

Update: I ended up going with a BMW 550xi

@killer77366

2 жыл бұрын

Still want a Corvette in my life so the dream continues

Loved the video the Corsa extreme is the exhaust I’ve been thinking about, what headers do you recommend for the C6?

@JReedsLoveofCars

2 жыл бұрын

Thanks for watching!! I do love the extreme as well!! Drone is minimal and you can still have a conversation on the phone until you nail it! I have Dynatech headers. Zero complaints. Very little hang below chassis. Other than that, it really depends on your budget. Most people will always recommend what they have. Texas Speed are probably the most budget friendly while not sacrificing quality. Only downside is, they hang a bit lower than most. The other end of the spectrum would be Kooks

With stage 2 cam a stall converter and change gears in diff for max performance

I have a 2009 Z51 6 speed car added Texas Speed long tube headers, wrapped them, deleted the cats and have the Borla Atac exhaust with the Brian Tooley stage 3 cam and it sounds hella good brother. Added the Veraram with the power wedge and went old school with a Hurst short throw shifter and a q-ball shift knob that shows the shift gate but instead of 6th speed it says FUCKING FAST. Love you channel brother, keep on posting and maybe some day we can get together with our toys.

@JReedsLoveofCars

2 жыл бұрын

I love it!!! 😂 I bet it does with that stage 3! Are you in the DFW area? I appreciate you watching!!

@tomu3196

2 жыл бұрын

I'm outside of Cleveland, Ohio....wouldn't be against heading south Texas 2k next year or something like that and catching up.

@JReedsLoveofCars

2 жыл бұрын

Cool!!

The first mod you need to do when you get a C6 Corvette is to move to Texas...lol

@JReedsLoveofCars

Ай бұрын

good point! lol

Love the build! Looking to buy a C6 very soon. Going the twin turbo route; would you still recommend this order? Minus the supercharger obviously lol

@JReedsLoveofCars

Жыл бұрын

Thank you! If you’re going twins, I would skip the headers. Otherwise you will be replacing them again for turbo manifolds. I would skip the cold air intake too. Basically skip everything that you’re going to have to replace again when you get the turbos.

Good advice bro. Have 2006 drop top got it in 2007 only thing I have done (myself) has been to install Borla Attack exhaust. Really love the sound. Oh also also auto paddle shift which I always use. Love the car & sound, but have thought about cold air intake? Should I consider headers 1st. Don’t race just enjoy the sound! Would appreciate your input.Thanks John L. L

@JReedsLoveofCars

Жыл бұрын

If you get headers, you should get a CAI at the same time. That way you’re paying for one tune to get the most bang for your buck!

I have the 2007 with the LS2. First thing I changed was the headers, x pipe with cats, intake and intake manifold (fast102). It was real nice. You don't need a tune for all that, but I did it anyway. With all that, it gave me just around 390 hp at the wheel. I then changed the exhaust to a Billy Boat, and I slightly regret that part. Now I get drone between 1200 and 1700 rpm and it rattles on the gas tank heat shields. Many mechanics tried to fix this, but it just keeps coming back. Still, it is still a good fun car.

@JReedsLoveofCars

9 ай бұрын

How do you like hte fast intake? I was wondering about those! That was the main consideration when I chose the Corsa. I didn't want drone either. Having said that it drones a little around the same RPM range, but I don't notice it unless I'm looking for it. Either way, the car is almost too loud to conversate. I love it!

@eyemastervideo

9 ай бұрын

@@JReedsLoveofCars the drone comes from the exhaust. If I had the npp,I would not have gotten the exhaust. The fast intake is a good mod. No regrets there.

My man JReed.. tell em like it is.. Even correct on the HP.. 2010 GS 6MT, headers,BTR STG3,Halltech Killer Bee.. 467HP, 439 TQ.. Manual rides next on your list should be a MGW Flatstick

@JReedsLoveofCars

2 жыл бұрын

Nice! I bet that stick moves out!!!!

"you gon want an axleback ,OR STRAIGHT PIPE THAT BITCH" lmaoooo , good vid bro thanks for this tips.

@JReedsLoveofCars

2 жыл бұрын

😂 Thanks for watching!

Just bought a 07 coupe with 22k bro dream car!

@JReedsLoveofCars

Жыл бұрын

Nice!! Congrats!!

I just bought a C6 base. It has a corsa axle back sport and Z06 brakes. I'm going straight for the cleetus cams and 100 shot of nitrous and an ACT clutch and flywheel

@JReedsLoveofCars

Жыл бұрын

Nice!!

I got a BTR Jam cam 230 intake and 242 exhaust that’s about all the stock converter can hold I got an 08 LS3

@JReedsLoveofCars

3 жыл бұрын

Mine is 227/239. It surges when it's cold..... just enough that I like it! 😀 My car is in the shop now getting a converter so it shouldn't surge at all. Can't wait to get it back.

I think it's best to know your goals and go from there, like for me I want a nice 500-550 whp N/A build and could probably have the package done for around $5500. I feel if you do things separate somewhere along the line you'll take a hit in the wallet.

@JReedsLoveofCars

3 жыл бұрын

You definitely gotta know your goals. I think most people won’t know a goal until a few years after ownership. I think the average joe build them out in incremental steps based on budget.

@dannyh5700

3 жыл бұрын

@@JReedsLoveofCars right, and I was thinking incremental steps could end up costing more.

@dannyh5700

3 жыл бұрын

For example what if you buy an MSD and after some use you decide you want a blower? or purchasing 1 7/8 headers then deciding going to blower and realizing 2' headers are needed.

Hey man we are car twins i got a white 11 grandsport auto aswell, and yes no npp exhaust on mine neither lol and yes i got headers and a tune as first mod, haven ran it at the track tuned yet, but i ran 12.47 stock and 12.17 with headers and no tune in summer texas weather im sure now with the tune ill be in the 11s, ran a ferrari 458 on the highway the other day from like a 80 to 150 im pretty sure it was driver mod but i still got em by 2 cars

@JReedsLoveofCars

3 жыл бұрын

What's up man! Nice!!!! I've only ran mine on a 1/4 track one time with old street tires. Spinning the whole time. Those are good ET's !!! You'll definitely bee in the 11's. It's been awhile since I had any street fun. I bet that was a blast!!

“The hell was that..” 😂

Awesome content! Nothing sounds better than a nasty N/A car. Always puts a huge smile on my face. I live at a high elevation, so unfortunately, boost is the only thing that will truly make you better power.

@JReedsLoveofCars

Жыл бұрын

Thank you!! I agree…especially a Z06

Cam,injectors,intake,computer,tune,and exhaust 😎 Got an ls2 with just shy of 600 ponies..not much needed if you do your research to gain amazing power for resonable money! DO DO DO YOUR HOMEWORK AN BUILD YOUR DREAM

Supercharger & headers is the best route Loud & fast without being quiet

@jasonbrisco6585

2 жыл бұрын

Hands down, if you can afford it out the gate!

Man, you keep saying Varam lol.... I had the Vararam, loved it..

@JReedsLoveofCars

2 жыл бұрын

Man I’m country. I’m not surprised! Lol

How you doing sir ? Beautiful Z06! How’s the engine any famous over rated valve issues ? Thanks. I’m on the market for a stock Z06 2008 and that’s the only thing I’m concerned about I don’t plan to race or track just spirited driving here and there.

@JReedsLoveofCars

Жыл бұрын

Thanks! Mine is actually a Grand sport so I don’t have the valve issues. However, I will say that most of the problems you read on the Internet, are true. I’m learning that myself!

I just did flex fuel intake an full exhaust . Dyno 415hp on e85 and 400 on 91 .

@JReedsLoveofCars

2 жыл бұрын

Nice!!! I think mine dyno’d at 403 with full exhaust so your numbers are spot on. you got a A6?

I Agree

Haha, true on the supercharger. I barely get to get into the power. Running a maxed out D1sc, pushing right around 1100 hp (at engine not the wheels). Almost no place available to rip it more than 3 seconds. :( One mod you guys should do is E85 and injectors. If you can't tune it yourself, add it with a mod like headers, so they can do both. The Grand Sport is 10.7:1 compression and takes good advantage of it. If you are supercharged, it makes a huge difference. You can add a DSX e85 sensor and install injectors yourself. Just do the injectors while at the tuning shop because you can't drive on the new ones until you put the new data in the computer.

@JReedsLoveofCars

Жыл бұрын

Nice! I see you went the Pro Charger route. Nothing like the sound of the bov on a Pro charger setup! Good tips!

Good look for your c6, the white with blacked out emblem and sides. My yt image is my cyber grey, my current is dark midnight blue, blacked out, a beaut. The headlights are some work but a great look. 🍀🍀

@JReedsLoveofCars

3 жыл бұрын

so you blacked out your headlights? I've tried that about 3 times and failed miserably each time!! I bet that cyber grey looks good!!! Thx for watching!

@SoberIrishman

3 жыл бұрын

@@JReedsLoveofCars thx bud, yep i did one afternoon down in SC 2 years ago. It is actually not hard. Soap water the back of the tint film, spray the light. Get in the summer sun. Let the headlight and tint sit in the sun about an hour [before the spray with water]. Then, for each...place the tint in and, silly as it sounds. Thumb and forefinger the tint to fit. The heat friction warms the tint and allows it to flatten over the curve. Just keep all wet w dawn and water mix. Then shammy over to dry....i had 0 air bubbles. 🍀🍀

@JReedsLoveofCars

3 жыл бұрын

Nice!!! Thx. I’m going to save this!!

@SoberIrishman

3 жыл бұрын

@@JReedsLoveofCars sure, feel free also yo reach out if u have questions. Take care!

First change the cam to ls9 second change the heads Texas speed third add a atomic intake manifold then add a A&A super charger next short shifter next corsa exhaust then some HRE wheels That is my build on my 07 zo6 Running around 900 hp

@JReedsLoveofCars

2 жыл бұрын

Nice!! You running meth?