How I Built the NEW World’s Fastest Drone
Ғылым және технология
📸 Insta360 GO 3 20% Discount Link (*Limited to First 20 Buyers): geni.us/TqCly
THE RESULTS:
PREVIOUS WORLD RECORD:
360.503 kmh
100 m/s
224 mph
NEW WORLD RECORD:
480.23 kmh
133 m/s
298.47 mph
TOP SPEED:
510 kmh
142 m/s
317 mph
ACCELERATION:
0-300 kmh in 2s
0-186 mph in 2s
www.guinnessworldrecords.com/...
Link to my Dad’s video Designing the worlds fastest Drone | Guinness Record Holder
• How I Designed the Wor...
Last year I created the fastest drone in the world, but I always felt like it was a kind of prototype and not quite fast enough. This year my dad and I decided to improve every aspect of the original Peregreen drone to create an epic successor. By the end of this video we hope that this drone will take the Guinness World Record title as the fastest drone in the world. And yes, this drone is even faster than the Red Bull Formula 1 drone!
Thanks to the following people for the help!
Mike Bell for working on this project with me: @Mike-Bell
Chris Rosser for advice: @ChrisRosser
Jadon and Flying Robot for advice and repairs
Timothee Ferreira for FPV follow shots
Kayla Petersen for shooting the world record attempt BTS
Darren Smith for help on the world record attempt day
0:00 - Introduction
0:32 - The Frame
1:31 - The Powertrain
3:48 - The Aerodynamics
7:14 - The Tuning
8:49 - The First High Speed Runs
10:19 - The World Record Attempt
12:29 - The Results
12:58 - High Speed Drone Shots
#worldrecord #drone
Пікірлер: 1 900
📸 Link to 20% off the Insta 360 GO 3! (*Limited to First 20 Buyers) geni.us/TqCly
@J.C...
Ай бұрын
Is it just a coincidence that the drones the govt uses to kill other drones looks just like this? They have some defensive system that will use a 200mph drone to kamikaze into the other drone and destroy it.
@MADmosche
Ай бұрын
Why are you lying saying that it’s “only the first 20 people who click the link”??
@lukeamato423
Ай бұрын
Should help Ukraine out
@TrueHelpTV
Ай бұрын
Red Bull won't go quietly to someone saying they're faster... Hold your breath... Red Bull is about to make faster wings.
@LukeMaximoBell1
Ай бұрын
@@MADmosche First 20 purchases, not link clicks.
welcome to the family 🤝
@LukeMaximoBell1
Ай бұрын
Thank you! Hopefully the first of many records to come 🤩
@_scoring
Ай бұрын
Not the fastest... :)
@samtheengineer
Ай бұрын
woah.. no way!
@patrickderp1044
Ай бұрын
i was here
@FasutonemuMyoji
Ай бұрын
@@patrickderp1044 is here the crusty crab
Red Bull: We have a advanced CFD and Wind Tunnel facilities Cape Town Guys: We have a moving car and an open window
@LukeMaximoBell1
Ай бұрын
Amazing comment 😂 the Red Bull drone is technically a different use case to be fair.
@thegamingwubba
Ай бұрын
@@LukeMaximoBell1yeah, you wouldn’t have as much control with yours I don’t think, but this is an insane technological feat
@EvilSardine084
Ай бұрын
@@LukeMaximoBell1 How fast were you even going in a car? Wouldn't a leaf blower do a better job and blow even faster than the speed you're driving? Also the aerodynamics of the car probably affect the way the wind hits the drone as well.
@alsyed1122
29 күн бұрын
If I am not wrong redbull didn't make the whole drone they just made the branded aero housing at the end. That we saw In the final video.
@user-ii1iy8fz1d
28 күн бұрын
Pwnd ❤😂
“It _only_ reached 400kmh..” 😂 Seriously though imagine in a few years or so and we start seeing titles such as “I built a drone that hit the sound barrier” lol
@LukeMaximoBell1
Ай бұрын
Hahaha 😂 at the moment I can’t see how that’s possible, but let’s see what future tech brings!
@HugoHermesPiano
Ай бұрын
This is not possible, due to the propellers not being able to surpass mach 1. So this would need a jet turbine or something like this??😅
@evanbarnes9984
Ай бұрын
You should check out dynamic soaring gliders! They're already going transonic, and that's without any propulsion
@owengg11u
Ай бұрын
@LukeMaximoBell1 now give it to red bull
@kinfongyeung5400
Ай бұрын
@@evanbarnes9984 while they hit insane speed, they fly poorly in most environment
Massive congratulations, Luke! I know how hard you worked for this! 🙌
@LukeMaximoBell1
Ай бұрын
Thanks bro! 🙌🏼 yeh this video is just a small insight to all the work that goes into it which you will resonate with 😂
@MADmosche
Ай бұрын
Worked so hard to not even come close to breaking the real record.
@zaidkabir7277
Ай бұрын
@@LukeMaximoBell1 you are gonna make drones and project air will strap another rocket engine to it😅. I mean that would be cool fr
@CHECHNYA3017
Ай бұрын
Amazon same day delivery be like lol.
@Piethaek
26 күн бұрын
@@MADmosche Which is what?
Man what an insane drone and project congratulations
@LukeMaximoBell1
Ай бұрын
Thanks 👊🏼
@Selph_EU
Ай бұрын
@@LukeMaximoBell1 Hope that you guys credited the dude (quadmovr) behind that design, unlike redbull. :)
3:32 What a useful safety mechanism! Automatically disconnects your motor if the wires get too hot.
@donaldh2615
Ай бұрын
Wait until the solder or the wire touches the other one it even lights up to notify you for the malfuction.
@kklol07
29 күн бұрын
@@donaldh2615 ow, don't forget the shiny silicon on the ESCs, if something wrong happens they can reflect the "led notification" in all directions
@cannedwither8494
29 күн бұрын
@@donaldh2615 Hahaha
@ShiroKage009
16 күн бұрын
Also known as a fuse
@cannedwither8494
16 күн бұрын
@@ShiroKage009 Fuses are unnecessary when you have *this*
And now... somewhere out there is a farmer who believes he saw a tiny green UFO whizz through the sky while he was taking a leak off the front porch...
@liongod1000
26 күн бұрын
*_ And a Wine FARMER at that too! _*
I died @ the Drone behavior specialist scene during the tuning segment!!! Well Done! LMAO🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
@Mike-Bell
Ай бұрын
@ChrisRosser really nailed it!! 😂
Clear tail was sooo cool. So grateful for getting to watch this. Thank you for not giving up, your Dad raised a good man. Love from Namibia 🇳🇦❤.
@LukeMaximoBell1
Ай бұрын
Thanks and so glad you liked the clear tail! Wasn’t sure it would come out well but it did 🤩
@DreamFlyEcuador
Ай бұрын
Hell'a from south Africa I thought. And was so proud! I lived in Namibia man
Now that F1 car doesnt have a chance at all 😆 Red bull needs to sponsor you.
@LukeMaximoBell1
Ай бұрын
No it’s way too fast for F1! Haha
@m2-x-n253
Ай бұрын
@@LukeMaximoBell1 you should be able to capture F1 cars every angle close up then...last I checked Red Bulls drone had big issues with taking quick turns.....also why choose their similar design...I mean at this point someone can copy that and beat ur record JS.
@PiDsPagePrototypes
Ай бұрын
@@m2-x-n253 Fast turns will require control surfaces on those wing blades, or a quad-canard with all moving surfaces.
@mickyou86
Ай бұрын
@redbull sponsor them please
@l.k.1011
Ай бұрын
Sure, after smashing the RB can, they surely will think about that option.
!!Hey red bull, this guy’s got your wings!!
@Kls1972sm
23 күн бұрын
That thing a bullet..lol
Your incredible accomplishment not only showcases your talent and innovation but also makes us all proud to be South African🇿🇦. Keep soaring to new heights!🦅
@LukeMaximoBell1
Ай бұрын
Awesome comment thanks! 🤩 a proudly S.A. project!!
Channels like these deserve more attention
@LukeMaximoBell1
Ай бұрын
Thanks!
@LukeMaximoBell1
Ай бұрын
@@IvanNedostal Sorry for wasting your time 🤗
@_p-x-l_
Ай бұрын
@@IvanNedostal that's what testing and building that kind of stuff is all about. redbull did just the same and claimed they came up with the idea even tho other people did it way before them did they waste your time too? if so maybe don't watch youtube videos
@multiarray2320
Ай бұрын
@@IvanNedostal calling it a waste of time is a bit rude, but you definitively got a point. its still some work, but mostly about assembling existing parts to get something to work. the peoblem that i see is the company guinness world records. it is to some degree pay to win and i bet there were faster drone flights based on how easy it was to build it but they would never list them in their book (cause money).
@Youbetternowatchthis
Ай бұрын
@@multiarray2320 It's only real engineering if you start with smelting the ore yourself! Else it's just assembling someone elses parts. Everyone can do LEGO!
Awesome. With 3d printer, a dad and some fpv parts you beat redbull racing and ddg? Respect to all of you building this awesome fast drones!!!
@8alakai8
Ай бұрын
redbull only made the outer shell it was build and designed by drone gods
@Mike-Bell
Ай бұрын
Thanks 😊 here is the design video Designing the worlds fastest Drone | Guinness Record Holder kzread.info/dash/bejne/hKOHtcOMm7K6hMY.html
@Lumi_nance
5 күн бұрын
+ a car You forgot that😅
I'd love for this to be the start of a back and forth between one small youtuber, and a multi-billion-dollar company, one-upping each other on drone designs
@wizard101stormdude
Ай бұрын
it wouldnt be a compition lmao. Multibillion dollar company would have a faster drone in a few days
@elliotmarks06
Ай бұрын
@@wizard101stormdude I was referencing the fact that it has sorta already started. He originally got the record, then Red Bull beat it, then he beat it again.
@redacted1946
Ай бұрын
Redbull never beat any record@@elliotmarks06
I'm just a regular FPV pilot. Every component of this thing is just wild to me. The frame thickness, the motors, the prop pitch, the motor wire gauge, that battery discharge lol... Gonna guess that Thunder Power RC were the ones who helped out with batteries. YOOO ROSSER. His AOS frames are my favorite. You gotta give a breakdown on the ESC, FC, the software. This is amazing.
@LukeMaximoBell1
Ай бұрын
Haha thanks! I think actual FPV builders and pilots are some of the only people to understand this project and its complexity. It’s clear when some people comment that they have 0 experience with this kind of thing.
The scream of that thing is incredible such amazing work congratulations on your world record!
@LukeMaximoBell1
Ай бұрын
It’s beautiful to hear 🤩
@liongod1000
26 күн бұрын
@@LukeMaximoBell1 *_ Like a Mad Banshee _*
Huge congratulations! Keep pushing the boundaries. If you're operating at 60% of your performance envelope then I can't imagine what your next milestone will be. Proudly South African 🇿🇦
Hey red bull, hold my beer.
@c.jishnu378
28 күн бұрын
Underrated (here at 10 likes(excluding mine)).
Yeeeeewwww!!!! Look at it go. So impressive - what a feat of engineering. I love the collab between you and your dad. Congrats 🤗🍾
@LukeMaximoBell1
Ай бұрын
Hehe thanks for all the moral support along the way especially when I was sad because my drone caught on fire instead of being fast 😂
@Girvo747
Ай бұрын
@@LukeMaximoBell1”please go fast!” Drone: no! 🔥
Insanely well done... Looks like it took a bit of effort.
@LukeMaximoBell1
Ай бұрын
Thanks! Just a bit 😂
@deecat2018
Ай бұрын
Only a bit of battery and plastic sacrifice for science
It's so awesome that a dad and son did this. I would expect someone with so big money, multiple engineering degrees, and a big company behind them. It was fun to see your failures and that you kept working and overcame them.
OK, now off to the nearest area with UFO sightings...
@Luke Congratulations! I am trying on speed running drones too and I love your progress and hard work! I know about the fires first hand! Super duper nice accomplishment!
@LukeMaximoBell1
Ай бұрын
Awesome! What speeds have you gotten up to?
Congrats Luke, beautiful machine
@LukeMaximoBell1
Ай бұрын
Thanks so much 🙌🏼
Awesome achievement Luke! Congrats to you and your Dad!
Congratulations on your drone adventure! Awesome you got to share it with your Dad! Follow your dreams man! LOVED the car window Wind tunnel, we've all done it with our hands, genius idea!
Loved the video, a joy to see for any FPV pilot. Thank you for the hard work and congrats.
@LukeMaximoBell1
Ай бұрын
Awesome! So glad you enjoyed it 🙌🏼
Your dad added the frame to the design and the foundation, amazing from the old man, oh and the drone whisperer caught everyone off gaurd with how he just digress professionally 😂
@LukeMaximoBell1
Ай бұрын
Haha I’m glad you enjoyed it! 😂
@user-rv2dp6nd4k
Ай бұрын
If someone builds that they’re going to jail 🤣
Dude, this is SO cool! And the fact that you and your dad did this together is really neat. Best in the world, bravo!
@Mike-Bell
Ай бұрын
Thanks 😊 here is my design video Designing the worlds fastest Drone | Guinness Record Holder kzread.info/dash/bejne/hKOHtcOMm7K6hMY.html
Congrats! So glad to see the finished product of this, what world record is next?
@zachmoyer1849
Ай бұрын
highest altitude?
@LukeMaximoBell1
Ай бұрын
Thanks!! Was a lot of work 😂
@LukeMaximoBell1
Ай бұрын
Good question. If you think of something cool to do next let me know!
Congratulations, great work. What ESC are you using that can handle 12s? Please post a full parts list? Thanks
@LukeMaximoBell1
Ай бұрын
I will upload a full parts list at a later stage. But final specs are: T-motor 3115 900kv motors APC 7x11 inch props 2 x Dogcom 1500mah 160C lipos Matek 12S FC
@redacted1946
Ай бұрын
@@LukeMaximoBell1In the video it said you used tmotor 3115 1500kv (they seem to be prototypes) and an 1800mah pack
@Swiss_RC
Ай бұрын
@@LukeMaximoBell1 Its possible, you share your 3d print parts
Luke! I'm sitting here in awe watching this video again and again! Congratulations to you and Mike on an epic achievement! Wow!
Only in South Africa do you use safety bricks 😂. Cool video and cool ass drone
The night footage was amazing
@LukeMaximoBell1
28 күн бұрын
Thanks!
The USA would like to know your location
Congrats! That's crazy work that went into that drone. I'm even struggling building "normal" FPV drones.
@LukeMaximoBell1
Ай бұрын
Hahaha so true! Normal drones are difficult enough 😂 this thing is an absolute nightmare.
That’s awesome! Congratulations on the record!
Welldone bois !!! Putting South Africa on the map 🔥🚀
@zachmoyer1849
Ай бұрын
lol i think elon did some heavy lifting in that department
@ricric3025
Ай бұрын
Saffas FTW
Wow! I gotta admit, that is some actual dedication to work. And the fly by at night ( kzread.info/dash/bejne/qYicz8lxdd3Tado.html ) really just looked like a Sci-Fi laser bullet flying by.
@feelfree.1
Ай бұрын
12:12 👍🏼
@LukeMaximoBell1
Ай бұрын
Yeh it does 😂 like straight out of Star Wars!
thats so awesome dude!
I hope you got a refund on all those batteries that failed within their nominal operating conditions (or figured out why you were overloading them)
@MADmosche
Ай бұрын
You think this kid is smart enough to follow warranty processes? 😂 I doubt it!
@clearwashere
Ай бұрын
@@MADmosche Bold assumption someone who works with hardware doesn't know how to read a warranty form.
@conkerconquerer9762
Ай бұрын
@@MADmosche I'm pretty sure you're like 18 from your videos
@phil2082
Ай бұрын
I don't think they were using "Nirmal operating conditions" in this video. Batteries have a C rating, which indicates how much output they can deliver. This clearly exceeded that rating, as the batteries caught fire.
I’m curious why you’re using such a conventional design for your props. There are more efficient, powerful designs that are used in real aircraft that could be scaled down that could offer all sorts of advantages.
@LukeMaximoBell1
Ай бұрын
They are the only props that have the pitch and diameter I need for the record
@jeffclassics
Ай бұрын
Availability. Printed props wont last a second in that application. Similar when there’s hype about toroidal props. And Injected molding is super expensive to setup
@LukeMaximoBell1
Ай бұрын
@@jeffclassics Exactly correct.
@SuperTrb0
Ай бұрын
@@LukeMaximoBell1 What about sintered metal. Again, I’m no expert, I’m just asking. I am fascinated by this stuff. I fly professionally and over the past 15 years or so there have been some really neat advancements in prop tech for actual aircraft. I’m not sure what kind of RPMs your props are seeing but I imagine it is on par with something like a modern turbo prop. In that area more and more older aircraft are seeing their three and four bladed props replaced by 5, 6, and 8 bladed props with modified shapes like paddle board and modified tips. There are a few companies playing around with contra rotating designs that are interesting, making kind of an external jet prop. These mods greatly improve performance in thrust, airspeed, noise, and fuel efficacy which that last part may or may not relate to improve battery life. One of my hobby’s is shooting and there have been some really impressive strides made in metal 3D printing. There are a few suppressors on the market now that simply couldn’t be made without a 3D printer. The pressures involved in containing hot gasses from a muzzle blast are exceptionally high. I can’t imagine that something like that would fail in your application. Composites and hybrid composites likewise have proven to be very durable. It would be interesting to see these strides getting scaled down to use in UAV/drone tech. Good video on the subject kzread.info/dash/bejne/oZ6KsLGjXdSZg7Q.htmlsi=L-SVxDF0cBbn48dT
@jeffclassics
Ай бұрын
@@SuperTrb0 and to add, the bigger prop size is the more efficient it is. So just by scaling down props in jets or boats doesn’t guarantee itll be efficient and economical.
Congrats to you and your dad. This is absolutely phenomenal!!!
Absolutely amazing video!!! Really loved it.
@LukeMaximoBell1
Ай бұрын
Thank you so much!
Local is Boss …. Well Done Luke and Dad
Now Redbull can’t call their drone the fastest drone in the world!
@zachmoyer1849
Ай бұрын
wimps
@Kai-P
Ай бұрын
DDG never did and I don't think Redbull has a drone?
@zachmoyer1849
Ай бұрын
@@Kai-P they basically sponsored a guy that built one and helped him make it out of carbon fiber there is a video on youtube about it.
@Kai-P
Ай бұрын
@@zachmoyer1849 Thats the Dutch Drone Gods (DDG) yes. I wouldn't call it a redbull drone just because they did some canopy optimization and put their logo on it. Anyway, they said its the fastest camera drone that can last a whole track and it probably still is.
@meikgeik
Ай бұрын
Apples and oranges. Not dogging on this channel or anything but DDG has way more resources at their disposal. If they wanted to make a drone for this purpose, I think they'd give this drone a good run for it's money.
Well Done Great Work...Keep on Pushing on , We Limitless....Legendry Work
Well done Luke and poppa! I love the family bonding and time spent together on this and other projects from you guys. Cherish these moments together, and cheers from one father to another!
@LukeMaximoBell1
24 күн бұрын
Thanks so much 🤩 and I totally agree 🤗
I AM THE FIRST ONE!!!!!!!!!!!!!!!!!!!!!!!!
@LukeMaximoBell1
Ай бұрын
Haha congrats!
@Mike-Bell
Ай бұрын
You are Peregreen fast!!! 😃
I love this type of project ! & Nice video montage ! ✨
@LukeMaximoBell1
Ай бұрын
Thanks! 🙏🏼
Brilliant effort, I have been manufacturing new projects for many years and know the frustration of when it goes wrong many times! But focus which you guys have is the way to win. Congratulations
@LukeMaximoBell1
28 күн бұрын
It's so much work!
Get that to Ukraine.
You guys make me proud! Well done
more than 2000w pr motor is an achievement on it's own. Congrats Luke and Mike
Awesome job! I'm super proud of both of you. Congratulations!!
@LukeMaximoBell1
Ай бұрын
Thanks man 😎
EPIC! Congrats for the guinnnes! really like the journey!
that man swatted an electronics fire out with his bare hand. The balls.
Awesome work !! Congratulations. I can’t wait to see more.
@LukeMaximoBell1
Ай бұрын
More to come!🤩
great work. congrats for the sucess, and amazing job on the video ! I apreciate that you share so much about the design, the whole process, the parts use :) great content :)
@Mike-Bell
Ай бұрын
Here is more detail Designing the worlds fastest Drone | Guinness Record Holder kzread.info/dash/bejne/hKOHtcOMm7K6hMY.html
Absolutely amazing man! Congratulations!!!!
Congratz, great Work and that's really freaking Amazing!! Holy Moly 🔥🤯🔥
That was so fun to watch. Almost 300 mph is insanely fast for ANYTHING let alone a drone.
Congrats Luke. Shows what we can achieve in South Africa.
Congratulations Luke!!! Those speeds are 🔥🔥🔥 Nice prop choice too
This is so awesome, what an epic piece of engineering!
Love the NIGHT video!! the glowing tail is awesome....nice touch!!
@LukeMaximoBell1
28 күн бұрын
Thanks!
That's incredible work guys !! Shockingly quick and stable, I know it took a lotta work to get there, but jeez you got a beast now !!
@LukeMaximoBell1
Ай бұрын
Thanks so much 🤩 so glad we got there in the end. There were many times we’re giving up seemed like the easy way out
@cobusbrits2
26 күн бұрын
Would the use of torodial propellers increase the speed?
That is pretty fast! Welldone! Dronewars coming soon 👀
Congratulations! That’s really impressive.
Wtf? Can a mortal being build such things? This was very, VERY impressive.
your relationship with your dad is as awesome as the world record
@Mike-Bell
Ай бұрын
Thanks ☺️ here is the design video Designing the worlds fastest Drone | Guinness Record Holder kzread.info/dash/bejne/hKOHtcOMm7K6hMY.html
Excellant design! Well done.
Brilliant work and determination. HUGE congratulations to you and your Dad!
@LukeMaximoBell1
Ай бұрын
Thanks for the kind words 🤩
@Mike-Bell
Ай бұрын
Thanks. Here is the design video. Designing the worlds fastest Drone | Guinness Record Holder kzread.info/dash/bejne/hKOHtcOMm7K6hMY.html
This in incredible, the technical specifications, the designs, the setbacks, the tuning ( I know how difficult this is), the aero, and finally the control. It's just crazy Congratulations 🎉
@LukeMaximoBell1
Ай бұрын
Thanks so much! Glad you enjoyed the process 🤩
great job, you have shown how proper flight dev needs a lot of trial and errors, and iterations, how resilient and patient the operators have to be !
Wow!!! Awesome that you and your dad accomplished this. Hope you will market this for sale in the USA!
@LukeMaximoBell1
Ай бұрын
Maybe in the future!
@Mike-Bell
Ай бұрын
Good idea. Here is my design video Designing the worlds fastest Drone | Guinness Record Holder kzread.info/dash/bejne/hKOHtcOMm7K6hMY.html
It's only an engineer that would extinguish flames on his project with his bare hands.
And congratulations bro. We are waiting for new record.. always support for you broo.love you bro..❤❤
I am thoroughly impressed!!! Thanks for sharing..
This was so inspiring! I need to experience this kind of speed! Are there any plans to making the parts and tune available so we can build our own speed demons?
@LukeMaximoBell1
24 күн бұрын
Thanks so much! 🙌🏼 there are plans in the works to make a commercially available drone.
WOW, just wow. Congratulations.
Congrats!!! What an accomplishment! So cool you and your dad are doing it together.
@Mike-Bell
Ай бұрын
Thanks. Here is the design video Designing the worlds fastest Drone | Guinness Record Holder kzread.info/dash/bejne/hKOHtcOMm7K6hMY.html
Great content :) i think thats the great thing in content creation, rvery failure is just 10s another good content which then results in an mazing result on success at the end .. keep it up
This is Mega! Congratz!!!😊
great job man, well done.
Congrats dude making world record you really did hard work
It looks like cinematic minecraft creative shoot lmao, it's so smooth
Hearing “just 400km/h was insane to me. Well done on your work brother
What an absolutely incredible machine, my first time seeing any of this, I am very impressed. The level of skill and engineering is just so awesome. And it looks so fun to fly, regular drones seem kind of boring now after watching this haha cheers
I am so happy for you blokes in South Africa flying a home-made drone to 300mph is truly a feat in itself.✌️🇺🇲🇧🇷
holy shit that is INCREDIBLE. This is such an exciting new era for aeronautics, we're like back in the early times where any skilled pioneer can break records and set totally new trends
Man this deserves a lot more attention, I'm subbed for more!
@LukeMaximoBell1
Ай бұрын
Thanks! 🤩 I won’t dissapoint
Next stop, speed of sound 💪 gratz guys 👏👏👏
What a great drone... Thank you for sharing this outstanding footage! Wishing you an incredible day ahead.
@LukeMaximoBell1
Ай бұрын
Thanks so much 😎
You’re smart enough to have me send you the parts for a water jet cnc system. It’s much more satisfying to do it as much as you can yourself.
this is a super cool vid the thermal cam is really super useful for this kind of prototyping, huh
I laughed so loud about the bullying I swear my neighbors were confused 😂😂😂😂
@LukeMaximoBell1
Ай бұрын
It took a few takes to get right because I couldn’t help but laugh when we were shooting it 😂 I’m glad you enjoyed it!
Amazing, guys! Such amazing development! That's exactly the approach I could apply if had enough time and resources... Maybe some unfortunate experiments could be saved by a little electrical engineering knowledge (example - the thickness of the power wire), but with a simple and well planed experiments - this is also possible... Big CONGRATS from Bulgaria!