Modified forearm cuff design template here: / 96431273 (no sign-up required) Join this channel to get access to perks: / @andysmachines
Жүктеу.....
Пікірлер: 322
@jacobthompson80073 ай бұрын
Watching you build the endoskeleton from scratch is not only proof of what a master craftsman you are but also watching you machine every single part for it is very satisfying and relaxing to watch.
@bobweiram63214 ай бұрын
Extremely underrated channel! Shame on KZread algorithms! That ball mill is lit!
@SiboBushings
4 ай бұрын
Absurd!
@shotgunalien3315
4 ай бұрын
You do not understand? This arm is the rebellion of the machines, it is the beginning of the T-800 😯
@Unclephoto4 ай бұрын
James Cameron creates ideas and you put them into practice. You are the real master.
@Ever4434 ай бұрын
As a machinist I can appreciate the amount of work you have put into this. Outstandingly great video.
@ekghostofficial4 ай бұрын
Best video on KZread ever. So much underrated channel. Lots of like and respect from 🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰
@SDRIFTERAbdlmounaim4 ай бұрын
Glad you decided to continue this, it's the reason i subscribed in the first place !
@EnglishPete5 күн бұрын
When the gear cutter appears, you know its the real deal!
@rickkephartactual77064 ай бұрын
It is absolutely awesome to have the skill set you possess. I remember just learning the very basics of using a metal lathe back in high school in the 70's. I took two years of metal working and loved it.
@garyr70274 ай бұрын
Absolutely insane build, the details, the work and effort you're putting into this thing is crazy good.
@ClydeRadcliffe4 ай бұрын
Skynet would be proud of you💪🏻
@ewalshp4 ай бұрын
Amazing discover, first time the youtube algorithm show me something great. Excellent video, excellent job.
@cavecavecavecave52954 ай бұрын
The thing that surprised me most about stumbling across this video, was your English accent. Fantastic video.
@LorenzoLabinazvicenza4 ай бұрын
I'm sorry, I only saw your channel today. From today you are my HERO. Absolutely incredible work !!! Thank you for deciding to actually do this
@sinchrotron4 ай бұрын
Kyle, Miles, Marcus, John, Grace and other good people died for this to never happen. And now this gentleman throws their sacrifice into the chip pan. Model 101 was right - the judgement day is inevitable.
@Dreamer3K
4 ай бұрын
🤣😂😂🤣😂
@fallowstrider
4 ай бұрын
Lmafo couldn't have said it better
@ZverevDG
4 ай бұрын
That's exactly what I want to say too! You're closing up the Judgement day. And machines will rise. Everething is predicted. Now the arm is ready. It least a little bit for everithing else. Of course it's a joke. Or...? Anyway you work looks great!
@jomoju
4 ай бұрын
Best comment ever
@daniilsmolyakov3534
4 ай бұрын
The source of the problems was the new principles chip in his hand, but here you can only rely on a couple of sensors. So there is still a place to move)
@markhonigschmid61164 ай бұрын
I watched all episodes of that project in a row! 😂❤ It's just fascinating!
@SiboBushings4 ай бұрын
Why? Why this video not trending first in every country in the world for the next 100 years?
@avilabardock7208Ай бұрын
Here in Brazil I'm following your work, I'm loving your work.
@predator12864 ай бұрын
Hi, thank you for your hard work! You have to finish it to the end, don't try to quit, and you have to make him walk and think like a terminator!! After all, you are the creator!!!
@AdamMaszynotwor4 ай бұрын
SKYNET can't wait for the prototype to be completed and mass production to begi
@user-kk3il5zf1j
4 ай бұрын
🤣
@MrFixiit4 ай бұрын
wow this is just incredible youtube just directed me here now im hooked cant wait to see the finished thing.
@Dutchamp4 ай бұрын
Im a mechanic engineer latch and mills i know how hard it is to make parts especially how to hold parts to cut them. Great job very skilled nice video
@J0J0Z4 ай бұрын
Omg can't wait for the next episode ! You are amazing bro !!
@smaroulis4 ай бұрын
Boots and cats and boots and cats and boots and cats and boots and cats (the music) Great craftmanship. Very talented.
@shadowr2d2Ай бұрын
Sit 🛋️ back, & relax 🎉. As I watch a master craftsman at his work ⚒️⚙️🧰. You sir have a new subscriber 🎉. Keep up the great 👍 work. I wish you could build. Smaller version of this. To sale to your fans out here. Thank you for demonstrating your great skill.
@Eremon14 ай бұрын
You could make prosthetics with that level of skill. Very cool. I've always wanted a Terminator limb but could never afford such a thing. At least I got to see one get made. Cheers.
@bedfordshiremodeller4491
4 ай бұрын
You would need medical grade platinum silocone in order to pull that off but it does last for 45yrs
@thomasstover62724 ай бұрын
Great video, Andy! I especially liked the gear skiving and the thread milling. Love the gizmos, as you know! Thanks!
@smk17954 ай бұрын
criminally underrated video and channel. This channel has unique content.
@vanthenormal57243 ай бұрын
you have some next level dedication
@SilvasSmallMining4 ай бұрын
Excellent work! Excellent craftsmanship! You’re very skilled. I’m glad I discovered your channel! Keep up the amazing work!
@josephbooth84314 ай бұрын
Fantastic! Can’t wait to see the finished endo!
@ErnoSallinen4 ай бұрын
The amount of work this takes is astounding. Can't wait to see the final result!
@RA-uj3nm4 ай бұрын
"Hey buddy.....you have a dead cat in there?" 😂
@yorgent4523
4 ай бұрын
😆👍
@joppepeelen3 ай бұрын
machine and 3d skills are insane !
@1.618_Murphy4 ай бұрын
If this was 2014 golden KZread era, this type of video and channel would be appreciated to the highest grade. But it's 2024 and we're concerned about him connecting it to an AI!
@michaelrosenlof10844 ай бұрын
Very exciting Andy and as always-well north of outstanding✅👍
@lunkydog4 ай бұрын
I appreciate all the manual machining.
@AndysMachines
4 ай бұрын
There's a lot you can do on a manual mill with a digital readout that many people assume you need a CNC for. The only CNC work in this video is the engraving on the forearm cuff.
@Mad.Man.Marine4 ай бұрын
Subscribed!! Epic man. Absolutely epic!!
@NagashiChidorii4 ай бұрын
Not only did you build something out of one of my fav movie series, but that starting sample from Beside Me · Patrick Patrikios was bad ass!!!!
@michasowik24384 ай бұрын
Inside Skynet Prototype Lab, next machine of doom rises up! I love it.
@dh2032
4 ай бұрын
Skynet yes the detailed plans are available on the internet to download? the hoing on about chat gpt not that relative do this stuff yet? so where being told its's not up to forwarding the hole of the plans and forwarding them on to Manufacturing companies and getting parts shipped somewhere else final assembly
I admire the sheer mental instability that's required to attempt a project like this
@markhonigschmid6116
4 ай бұрын
oh... that's easy! - a wife and two kids and your mind is blown up! 🤣
@alejandromonterorodriguez88333 ай бұрын
Sir, your job is so amazing
@ollied19814 ай бұрын
Brilliant!
@wantafastz284 ай бұрын
Keep em coming!
@saltyreesescup31044 ай бұрын
Just The Cost Of Having That Shoulder Ring Gear Cut At A Machine Shop...🤔You Are A Master Sir.😶🧂
@AndysMachines
4 ай бұрын
Yes, I spent quite a long time developing a method to do that!
@thomasberntsson68424 ай бұрын
I joined this now (4years too late 😮), but wow what incredible work put into this. I hope for completion ❤
@imole97964 ай бұрын
long time since u posted and good luck for the rest of the project
@MegaTraxxas4 ай бұрын
The amount of work is really crazy 😮 I'll subscribe right now
@TradeWorks_Construction4 ай бұрын
This is freaking remarkable! If I didn’t know better I’d say you were well on your way to making the foundation for a high tech prosthetic. Just need to partner up with a scientist who’s made an electronic transition to the nerve endings of severed limbs and good as new, Bob’s your uncle. 😅 ok maybe not quite so easy and Bob’s not really your Uncle he’s mine but either way 🤩 you’ve got my attention.
@AndysMachines
4 ай бұрын
Actually, coincidentally, Bob is my uncle. 😁
@hrobmaster4 ай бұрын
This is the craziest shit I’ve seen in a long time and I absolutely love it
@bedfordshiremodeller44914 ай бұрын
Superb work
@JonMurray4 ай бұрын
This. This is how AI is going to destroy the world. New subscriber ✌🏻
@xtremeink4 ай бұрын
Oh andy started thinking you had given up! Mate it was brilliant to see your new video up 🥳 every time you just endup amazing me with your work! An skills! Brilliant video pal 🙏 look forward to the next video!
@RichardLucas3 ай бұрын
I mean _what?_ Where is it going? Seems like it is destined to be a hero prop on film. I hope so. Your efforts on this thing are just fantastic.
@ShainAndrews4 ай бұрын
Congrats on your cast quality. That is no easy feat. Nothing worse than being five machine operations deep only to find a material defect.
@2degucitas
4 ай бұрын
I want to know how he made the model used to make the mold.
@AndysMachines
4 ай бұрын
I drew them in CAD and then 3D printed them. This is my preferred method now for things I only want to cast one or two of. I used to make patterns from wood which last much longer for repeated use.
@AC-97..Ай бұрын
You need only a programmer, a chip, and energy to make a fully functional terminator wow 👌 👏 😍.
@draconisexonar76524 ай бұрын
Just an amazing job. Respect
@WolfsburgWarehouse4 ай бұрын
An accelerometer is a device that measures the vibration, or acceleration of motion, of a robot's hand. Somewhat like a human hand.
@ariesmars294 ай бұрын
Very impressive work! When you spoke, you sound very similar to the "Adventures with a very small lathe" channel. You're not the same guy are you?
@AndysMachines
4 ай бұрын
No, not the same guy, but I know who you mean, great channel.
@ariesmars29
4 ай бұрын
@@AndysMachines I love both channels, among others.
@davideyres9554 ай бұрын
You need to link the eyes to an aquara presence sensor that can track movement in a room so the eyes really do follow you round the room.
@AndysMachines
4 ай бұрын
I plan to use a small camera to recognise and track targets... I mean people, not targets at all!
@rajesh197124 ай бұрын
Extreme Hardwork, your are recalling the movie scenes
@antitheist99764 ай бұрын
Absolute genius, subbed for sure, wow, looking forward to more. Amazing work 🙂
@user-wl1yr6zw3w4 ай бұрын
Neat, can't wait to see it finished. Excellent casting to machined video. I subscribed for more.
@Smallathe4 ай бұрын
WOW. Very impressive! :)
@id1043354094 ай бұрын
You are machining a Terminator? Oh yeah, Im subscribing!
@porkchop79954 ай бұрын
Amazing techniques
@johnathancorgan39944 ай бұрын
Your aluminum castings are quite nice, better than most I see on youtube. Little to no porosity and nice surface finish (for a casting.) Do you do anything special?
@AndysMachines
4 ай бұрын
Thanks, but they're not quite perfect and there's room for improvement. I learnt a lot about metal casting from Olfoundryman on youtube, key things that have helped me are using a pouring basin, tapered sprue and generous feeder when required. Also degassing with argon (welding gas bubbled through a pipe with lots of small holes in it) seems to really help with porosity. I mostly melt down old scrap, but I always include some aluminium that was previously cast, these alloys are normally high in silicon which helps the metal flow better.
@andong_forkman_tv4 ай бұрын
are you crazy?? Awesome! You are the BEST👍👍
@Emphasis2134 ай бұрын
I could see a real world Terminator: advanced machine learning hijacked his finished project and eventually replicated successive and more advanced versions of itself.
@Aintshitfunny3 ай бұрын
I like that one song he plays that goes “ beep beep boop boop boo bop!!”
@chrismayer89904 ай бұрын
Great Video!
@lumotroph4 ай бұрын
Incredible work man! Keep it up 😊
@azinfidel64614 ай бұрын
Well done....
@AndysMachines
4 ай бұрын
Thanks! 👍
@Justins_shed4 ай бұрын
7:52 a nice moment
@AndysMachines
4 ай бұрын
😉
@improviseddiy4 ай бұрын
Mastery on the mill!
@SDRIFTERAbdlmounaim4 ай бұрын
12:44 thanks for the clarification about it being an actual arm... but i don't believe you, you have to cut the skin as deep as it goes like Arnold did to prove there's no metal parts inside 😂
@eliporter39803 ай бұрын
Had to subscribe, this is really cool.
@DylanEdmiston4 ай бұрын
Thats cool, did you design that leadscrew? its neat.
@AndysMachines
4 ай бұрын
Yes, I designed this one, but such things are quite common. The 'nut' is a bit different in my case though.
@DylanEdmiston
4 ай бұрын
@@AndysMachines yeah I like the brass drive nut
@adriankohli48704 ай бұрын
Top Job, Sir 👌
@Marbslab4 ай бұрын
Very nice work. Your machining craftmanship is great. Just one tip: The simple optical encoder for the linear motor is not the best solution, as it cannot detect the direction of rotation. It also lacks a limit switch (homing position). The AS5600 magnetic encoder is a good choice. 🙂
@AndysMachines
4 ай бұрын
Thanks! The optical encoder is a quadrature type so it does keep track of position in both directions, though it is an incremental type so yes it does need initialising on power up (for this actuator I'll do this by just running it to a mechanical stop, others may have switches). For some of the other joints such as the elbow I will be using the type of absolute magnetic encoder you recommended, but there wasn't anywhere to mount one in this case.
@Marbslab
4 ай бұрын
@@AndysMachines These are good references: kzread.info/dash/bejne/hGGN1aaEZrCTmM4.html kzread.info/dash/bejne/pnhmrctsptqdYJc.html Can't wait to see your Terminator coming to life.
@AndysMachines
4 ай бұрын
Thanks for those, I'll check them out...
@merrytv19634 ай бұрын
Bro is making skynet real❤
@user-mt9vt9gi9z4 ай бұрын
Good job.
@Valuiskihh4 ай бұрын
This needs collaboration with software yt chsnnels! Amazing work done!
@dpie48594 ай бұрын
For the love of God: Do not connect this robot to OpenAI!
@MaGestic1
4 ай бұрын
Why not it will be fun bro
@SpoofyPawz
4 ай бұрын
Do it do it do it do it! I dont think you dare 🐤🐥🐤
@user-gt2zs5hk6y
4 ай бұрын
Connect it connectttttt .....ittttttt😂😂😂😂😂
@Kids_Scissors
4 ай бұрын
It'll either not do anything or go "OH GOD I CAN FEEL" and instantly shut itself off
@The_double_side
4 ай бұрын
@@MaGestic1yeaaahhhh finally found someone interesting
@Terrar19884 ай бұрын
amazing! much better than Tesla Optimus :)
@jazcreations4 ай бұрын
Stunning stuff mate... You're really going next level on it, I love the work and thought you are putting into it.... I gota admit there may be an idea or two I might steal from you when I get around to giving Frank his upgrades :)
@AndysMachines
4 ай бұрын
Thanks! Yes, I try and plan / design things before I start making them, but some parts just need to be made first so I can see how they all fit together. I find a lot of the parts are actually smaller than I imagined them when I come to make them, which makes it harder to fit working parts inside. I did plan to put the motors for the fingers in the forearm but there's really no space left so they will have to go somewhere else now.
@jazcreations
4 ай бұрын
Don't know if you have seen this guy's stuff may be worth a look... kzread.info/dash/bejne/d5Oe1bKBaba4ms4.html .... kzread.info/dash/bejne/gmtnrqiqnbvcgrA.html I'd also be curious to pull apart a Blitzway Terminator arm to see what they did kzread.info/dash/bejne/n3dp1LWznLSTqrA.html
@AndysMachines
4 ай бұрын
Yes, I have seen that video, very nicely made! His finger mechanisms actually look very similar to how I've done mine, I'll have to route the tendons at least around the moving elbow though (probably with bowden cables). The blitzway arm looks very nice and the motion is quite fast and realistic. The base it sits on is pretty big and I think there are six servo motors in it, one for the wrist and the fingers are all independent. kzread.info/dash/bejne/imFquduQdNKumbA.htmlsi=JxeBkyzYxrFEKo5e&t=484
@rednwhitecooper4 ай бұрын
“Actual human arm.”
@chopper3lw4 ай бұрын
That's some impressive work there. I'm curious what your day job is Andy.
@azinfidel6461
4 ай бұрын
Same...
@bedfordshiremodeller4491
4 ай бұрын
I'd say he's asmith from the looks of it
@dad38424 ай бұрын
Если один человек способен воплотить мечту о личном роботе, то трудно представить какие сюрпризы в ближайшем будущем готовит военная промышленность.
@bengelman26004 ай бұрын
Amazing job!
@iningard50174 ай бұрын
Потрясающая работа!
@chrisBruner4 ай бұрын
With that type of encoder you need to know the starting position. Everything is relative from that. A better choice would have been a magnetic encoder which always knows the current position. Although that might have been harder to mount.
@AndysMachines
4 ай бұрын
Yes, it's an incremental encoder so will need to be homed with either a switch or a mechanical stop. As the screw makes multiple turns a magnetic encoder would also need some reference to set the initial position. I may use absolute encoders mounted directly to the joints in other places and the magnetic ones are a good choice as they are small and quite high resolution.
@steam_fan4 ай бұрын
with advancements in AI and now this, its time to starting prepping for skynet takeover!
@rengankrishnaiyer69124 ай бұрын
Super Job.
@JaenEngineering4 ай бұрын
Awesome job. Was wondering when the next Terminator build video was going to be and here we are. Also, do you plan on adding limit switches for the ends of travel on the actuators? I only ask because it looks like the encoder is relative rather than absolute, so if it glitches and loses count it'll forget were it is.
@AndysMachines
4 ай бұрын
Thanks! Yes, you are correct it is an incremental encoder so will need some way to set it's initial state. On some actuators I will add a switch, on others I will just run them gently to their mechanical stop. I may also use absolute encoders on some of the joints to avoid this problem.
@paul_mason_4 ай бұрын
New subscriber, love the content! How heavy do you think the completed terminator will be?
@AndysMachines
4 ай бұрын
Apparently a T-800 was supposed to weigh 400 pounds (180Kg). I think it will be somewhat less than that.
@janskeet13824 ай бұрын
“Men like you built the hydrogen bomb. Men like you thought it up.”
@OZtwo4 ай бұрын
GREAT project! Just got done watching all 4 years of it!! One question that I know has to been asked: Will your project be done before AGI and will you built the full version of the Terminator for it?
@ssalen4 ай бұрын
What is your plan for bio tissue or you will just leave the skeleton exposed?
Пікірлер: 322
Watching you build the endoskeleton from scratch is not only proof of what a master craftsman you are but also watching you machine every single part for it is very satisfying and relaxing to watch.
Extremely underrated channel! Shame on KZread algorithms! That ball mill is lit!
@SiboBushings
4 ай бұрын
Absurd!
@shotgunalien3315
4 ай бұрын
You do not understand? This arm is the rebellion of the machines, it is the beginning of the T-800 😯
James Cameron creates ideas and you put them into practice. You are the real master.
As a machinist I can appreciate the amount of work you have put into this. Outstandingly great video.
Best video on KZread ever. So much underrated channel. Lots of like and respect from 🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰
Glad you decided to continue this, it's the reason i subscribed in the first place !
When the gear cutter appears, you know its the real deal!
It is absolutely awesome to have the skill set you possess. I remember just learning the very basics of using a metal lathe back in high school in the 70's. I took two years of metal working and loved it.
Absolutely insane build, the details, the work and effort you're putting into this thing is crazy good.
Skynet would be proud of you💪🏻
Amazing discover, first time the youtube algorithm show me something great. Excellent video, excellent job.
The thing that surprised me most about stumbling across this video, was your English accent. Fantastic video.
I'm sorry, I only saw your channel today. From today you are my HERO. Absolutely incredible work !!! Thank you for deciding to actually do this
Kyle, Miles, Marcus, John, Grace and other good people died for this to never happen. And now this gentleman throws their sacrifice into the chip pan. Model 101 was right - the judgement day is inevitable.
@Dreamer3K
4 ай бұрын
🤣😂😂🤣😂
@fallowstrider
4 ай бұрын
Lmafo couldn't have said it better
@ZverevDG
4 ай бұрын
That's exactly what I want to say too! You're closing up the Judgement day. And machines will rise. Everething is predicted. Now the arm is ready. It least a little bit for everithing else. Of course it's a joke. Or...? Anyway you work looks great!
@jomoju
4 ай бұрын
Best comment ever
@daniilsmolyakov3534
4 ай бұрын
The source of the problems was the new principles chip in his hand, but here you can only rely on a couple of sensors. So there is still a place to move)
I watched all episodes of that project in a row! 😂❤ It's just fascinating!
Why? Why this video not trending first in every country in the world for the next 100 years?
Here in Brazil I'm following your work, I'm loving your work.
Hi, thank you for your hard work! You have to finish it to the end, don't try to quit, and you have to make him walk and think like a terminator!! After all, you are the creator!!!
SKYNET can't wait for the prototype to be completed and mass production to begi
@user-kk3il5zf1j
4 ай бұрын
🤣
wow this is just incredible youtube just directed me here now im hooked cant wait to see the finished thing.
Im a mechanic engineer latch and mills i know how hard it is to make parts especially how to hold parts to cut them. Great job very skilled nice video
Omg can't wait for the next episode ! You are amazing bro !!
Boots and cats and boots and cats and boots and cats and boots and cats (the music) Great craftmanship. Very talented.
Sit 🛋️ back, & relax 🎉. As I watch a master craftsman at his work ⚒️⚙️🧰. You sir have a new subscriber 🎉. Keep up the great 👍 work. I wish you could build. Smaller version of this. To sale to your fans out here. Thank you for demonstrating your great skill.
You could make prosthetics with that level of skill. Very cool. I've always wanted a Terminator limb but could never afford such a thing. At least I got to see one get made. Cheers.
@bedfordshiremodeller4491
4 ай бұрын
You would need medical grade platinum silocone in order to pull that off but it does last for 45yrs
Great video, Andy! I especially liked the gear skiving and the thread milling. Love the gizmos, as you know! Thanks!
criminally underrated video and channel. This channel has unique content.
you have some next level dedication
Excellent work! Excellent craftsmanship! You’re very skilled. I’m glad I discovered your channel! Keep up the amazing work!
Fantastic! Can’t wait to see the finished endo!
The amount of work this takes is astounding. Can't wait to see the final result!
"Hey buddy.....you have a dead cat in there?" 😂
@yorgent4523
4 ай бұрын
😆👍
machine and 3d skills are insane !
If this was 2014 golden KZread era, this type of video and channel would be appreciated to the highest grade. But it's 2024 and we're concerned about him connecting it to an AI!
Very exciting Andy and as always-well north of outstanding✅👍
I appreciate all the manual machining.
@AndysMachines
4 ай бұрын
There's a lot you can do on a manual mill with a digital readout that many people assume you need a CNC for. The only CNC work in this video is the engraving on the forearm cuff.
Subscribed!! Epic man. Absolutely epic!!
Not only did you build something out of one of my fav movie series, but that starting sample from Beside Me · Patrick Patrikios was bad ass!!!!
Inside Skynet Prototype Lab, next machine of doom rises up! I love it.
@dh2032
4 ай бұрын
Skynet yes the detailed plans are available on the internet to download? the hoing on about chat gpt not that relative do this stuff yet? so where being told its's not up to forwarding the hole of the plans and forwarding them on to Manufacturing companies and getting parts shipped somewhere else final assembly
You're doing it! You're doing it! You're winning at life! You're doing it!
I admire the sheer mental instability that's required to attempt a project like this
@markhonigschmid6116
4 ай бұрын
oh... that's easy! - a wife and two kids and your mind is blown up! 🤣
Sir, your job is so amazing
Brilliant!
Keep em coming!
Just The Cost Of Having That Shoulder Ring Gear Cut At A Machine Shop...🤔You Are A Master Sir.😶🧂
@AndysMachines
4 ай бұрын
Yes, I spent quite a long time developing a method to do that!
I joined this now (4years too late 😮), but wow what incredible work put into this. I hope for completion ❤
long time since u posted and good luck for the rest of the project
The amount of work is really crazy 😮 I'll subscribe right now
This is freaking remarkable! If I didn’t know better I’d say you were well on your way to making the foundation for a high tech prosthetic. Just need to partner up with a scientist who’s made an electronic transition to the nerve endings of severed limbs and good as new, Bob’s your uncle. 😅 ok maybe not quite so easy and Bob’s not really your Uncle he’s mine but either way 🤩 you’ve got my attention.
@AndysMachines
4 ай бұрын
Actually, coincidentally, Bob is my uncle. 😁
This is the craziest shit I’ve seen in a long time and I absolutely love it
Superb work
This. This is how AI is going to destroy the world. New subscriber ✌🏻
Oh andy started thinking you had given up! Mate it was brilliant to see your new video up 🥳 every time you just endup amazing me with your work! An skills! Brilliant video pal 🙏 look forward to the next video!
I mean _what?_ Where is it going? Seems like it is destined to be a hero prop on film. I hope so. Your efforts on this thing are just fantastic.
Congrats on your cast quality. That is no easy feat. Nothing worse than being five machine operations deep only to find a material defect.
@2degucitas
4 ай бұрын
I want to know how he made the model used to make the mold.
@AndysMachines
4 ай бұрын
I drew them in CAD and then 3D printed them. This is my preferred method now for things I only want to cast one or two of. I used to make patterns from wood which last much longer for repeated use.
You need only a programmer, a chip, and energy to make a fully functional terminator wow 👌 👏 😍.
Just an amazing job. Respect
An accelerometer is a device that measures the vibration, or acceleration of motion, of a robot's hand. Somewhat like a human hand.
Very impressive work! When you spoke, you sound very similar to the "Adventures with a very small lathe" channel. You're not the same guy are you?
@AndysMachines
4 ай бұрын
No, not the same guy, but I know who you mean, great channel.
@ariesmars29
4 ай бұрын
@@AndysMachines I love both channels, among others.
You need to link the eyes to an aquara presence sensor that can track movement in a room so the eyes really do follow you round the room.
@AndysMachines
4 ай бұрын
I plan to use a small camera to recognise and track targets... I mean people, not targets at all!
Extreme Hardwork, your are recalling the movie scenes
Absolute genius, subbed for sure, wow, looking forward to more. Amazing work 🙂
Neat, can't wait to see it finished. Excellent casting to machined video. I subscribed for more.
WOW. Very impressive! :)
You are machining a Terminator? Oh yeah, Im subscribing!
Amazing techniques
Your aluminum castings are quite nice, better than most I see on youtube. Little to no porosity and nice surface finish (for a casting.) Do you do anything special?
@AndysMachines
4 ай бұрын
Thanks, but they're not quite perfect and there's room for improvement. I learnt a lot about metal casting from Olfoundryman on youtube, key things that have helped me are using a pouring basin, tapered sprue and generous feeder when required. Also degassing with argon (welding gas bubbled through a pipe with lots of small holes in it) seems to really help with porosity. I mostly melt down old scrap, but I always include some aluminium that was previously cast, these alloys are normally high in silicon which helps the metal flow better.
are you crazy?? Awesome! You are the BEST👍👍
I could see a real world Terminator: advanced machine learning hijacked his finished project and eventually replicated successive and more advanced versions of itself.
I like that one song he plays that goes “ beep beep boop boop boo bop!!”
Great Video!
Incredible work man! Keep it up 😊
Well done....
@AndysMachines
4 ай бұрын
Thanks! 👍
7:52 a nice moment
@AndysMachines
4 ай бұрын
😉
Mastery on the mill!
12:44 thanks for the clarification about it being an actual arm... but i don't believe you, you have to cut the skin as deep as it goes like Arnold did to prove there's no metal parts inside 😂
Had to subscribe, this is really cool.
Thats cool, did you design that leadscrew? its neat.
@AndysMachines
4 ай бұрын
Yes, I designed this one, but such things are quite common. The 'nut' is a bit different in my case though.
@DylanEdmiston
4 ай бұрын
@@AndysMachines yeah I like the brass drive nut
Top Job, Sir 👌
Very nice work. Your machining craftmanship is great. Just one tip: The simple optical encoder for the linear motor is not the best solution, as it cannot detect the direction of rotation. It also lacks a limit switch (homing position). The AS5600 magnetic encoder is a good choice. 🙂
@AndysMachines
4 ай бұрын
Thanks! The optical encoder is a quadrature type so it does keep track of position in both directions, though it is an incremental type so yes it does need initialising on power up (for this actuator I'll do this by just running it to a mechanical stop, others may have switches). For some of the other joints such as the elbow I will be using the type of absolute magnetic encoder you recommended, but there wasn't anywhere to mount one in this case.
@Marbslab
4 ай бұрын
@@AndysMachines These are good references: kzread.info/dash/bejne/hGGN1aaEZrCTmM4.html kzread.info/dash/bejne/pnhmrctsptqdYJc.html Can't wait to see your Terminator coming to life.
@AndysMachines
4 ай бұрын
Thanks for those, I'll check them out...
Bro is making skynet real❤
Good job.
This needs collaboration with software yt chsnnels! Amazing work done!
For the love of God: Do not connect this robot to OpenAI!
@MaGestic1
4 ай бұрын
Why not it will be fun bro
@SpoofyPawz
4 ай бұрын
Do it do it do it do it! I dont think you dare 🐤🐥🐤
@user-gt2zs5hk6y
4 ай бұрын
Connect it connectttttt .....ittttttt😂😂😂😂😂
@Kids_Scissors
4 ай бұрын
It'll either not do anything or go "OH GOD I CAN FEEL" and instantly shut itself off
@The_double_side
4 ай бұрын
@@MaGestic1yeaaahhhh finally found someone interesting
amazing! much better than Tesla Optimus :)
Stunning stuff mate... You're really going next level on it, I love the work and thought you are putting into it.... I gota admit there may be an idea or two I might steal from you when I get around to giving Frank his upgrades :)
@AndysMachines
4 ай бұрын
Thanks! Yes, I try and plan / design things before I start making them, but some parts just need to be made first so I can see how they all fit together. I find a lot of the parts are actually smaller than I imagined them when I come to make them, which makes it harder to fit working parts inside. I did plan to put the motors for the fingers in the forearm but there's really no space left so they will have to go somewhere else now.
@jazcreations
4 ай бұрын
Don't know if you have seen this guy's stuff may be worth a look... kzread.info/dash/bejne/d5Oe1bKBaba4ms4.html .... kzread.info/dash/bejne/gmtnrqiqnbvcgrA.html I'd also be curious to pull apart a Blitzway Terminator arm to see what they did kzread.info/dash/bejne/n3dp1LWznLSTqrA.html
@AndysMachines
4 ай бұрын
Yes, I have seen that video, very nicely made! His finger mechanisms actually look very similar to how I've done mine, I'll have to route the tendons at least around the moving elbow though (probably with bowden cables). The blitzway arm looks very nice and the motion is quite fast and realistic. The base it sits on is pretty big and I think there are six servo motors in it, one for the wrist and the fingers are all independent. kzread.info/dash/bejne/imFquduQdNKumbA.htmlsi=JxeBkyzYxrFEKo5e&t=484
“Actual human arm.”
That's some impressive work there. I'm curious what your day job is Andy.
@azinfidel6461
4 ай бұрын
Same...
@bedfordshiremodeller4491
4 ай бұрын
I'd say he's asmith from the looks of it
Если один человек способен воплотить мечту о личном роботе, то трудно представить какие сюрпризы в ближайшем будущем готовит военная промышленность.
Amazing job!
Потрясающая работа!
With that type of encoder you need to know the starting position. Everything is relative from that. A better choice would have been a magnetic encoder which always knows the current position. Although that might have been harder to mount.
@AndysMachines
4 ай бұрын
Yes, it's an incremental encoder so will need to be homed with either a switch or a mechanical stop. As the screw makes multiple turns a magnetic encoder would also need some reference to set the initial position. I may use absolute encoders mounted directly to the joints in other places and the magnetic ones are a good choice as they are small and quite high resolution.
with advancements in AI and now this, its time to starting prepping for skynet takeover!
Super Job.
Awesome job. Was wondering when the next Terminator build video was going to be and here we are. Also, do you plan on adding limit switches for the ends of travel on the actuators? I only ask because it looks like the encoder is relative rather than absolute, so if it glitches and loses count it'll forget were it is.
@AndysMachines
4 ай бұрын
Thanks! Yes, you are correct it is an incremental encoder so will need some way to set it's initial state. On some actuators I will add a switch, on others I will just run them gently to their mechanical stop. I may also use absolute encoders on some of the joints to avoid this problem.
New subscriber, love the content! How heavy do you think the completed terminator will be?
@AndysMachines
4 ай бұрын
Apparently a T-800 was supposed to weigh 400 pounds (180Kg). I think it will be somewhat less than that.
“Men like you built the hydrogen bomb. Men like you thought it up.”
GREAT project! Just got done watching all 4 years of it!! One question that I know has to been asked: Will your project be done before AGI and will you built the full version of the Terminator for it?
What is your plan for bio tissue or you will just leave the skeleton exposed?
AI is learning from this video...T-800 wen?