BUILDING HASEGAWA F-35 LIGHTNING II - 1/72 SCALE AIRCRAFT MODEL KIT
Ойын-сауық
In this video I am building Hasegawa 1/72 scale F-35B Lightning II scale model kit.
I mostly did it right out of the box, but I made some adjustments to the plane as the primary purpose would be to be in a "flying position".
- The landing gear was cut and rebuilt in the fully extended position.
- The horizontal stabilizer was positioned at an angle.
- Also, because the color of the decals from the kit were wrong, the main color was painted over them again.
It is one of the nice models of Hasegawa that can be finished in a short time without much effort.I hope the video helps you. Enjoy watching.
Follow me on instagram
/ ugurkenel
Follow me on facebook
/ ugurkenel
Пікірлер: 80
Beautiful Build!!
Wonderful job! Great video as usual!
@ugurkenel
10 ай бұрын
Thank you!
Elinize sağlık Uğar hocam. Yine güzel bir çalışma olmuş.
Eline saglik cok guzel olmuş ugur abi
Beautiful work.
@ugurkenel
10 ай бұрын
Thank you!
I just finish building of my TAMIYA 1/72 F35A recently, after I saw your video I decided to do this HASEGAWA F35B as my next kit. What a stunning work you do!! Brilliant idea to make a customised stand for the jet, make it more like a real scene.
@ugurkenel
6 ай бұрын
Thanks a lot. I am glad to hear that it helps to you. Cheers.👍
@allen7573
6 ай бұрын
@@ugurkenelHi sir, may I know which size you choose of the hand drill when you do drilling to the landing gear? And also, did you put the extra length plastic bar into the hole from you drilled, or just glued on it? Sorry for bothering, but I really like to recreate your customize work on mine to make it look like more real.
If not for that clear rod it looks real, great job again. I came over here the moment I saw your built update on Insta.
@ugurkenel
10 ай бұрын
Thanks👍
Cok guzel olmis yine. Umarim gerçeğide bir gun bizim hava sahamızda dolaşır.
@cemaa4338
Жыл бұрын
Bu iyi bir şey olmayabilir. Hava sahamıza düşman olarak girmesin de..... Umarım bir gün bizim ordumuz envanterine de girer. Üstünde Şanlı Türk bayrağı varken bunlardan bir çoğunu semalarımızda görürüz.
@hamitsezer
Жыл бұрын
@@cemaa4338 tabiki milli savaş ucagimiz ve bizim F-35 lerimiz olsun. En son teknolojiye sahip olalim. F-16 larimizin omru bitecek 5. Hatta 6. Nesil uçaklara geçiş yapmaliyiz.
@cemaa4338
Жыл бұрын
@@hamitsezer Kötü bir şey düşünmediğinize eminim zaten. Ne dilediğimize dikkat etmek gerekli diye düşünüyorum. Gerçek olabiliyor. Ayrıntı vermeyince tuhaf şeyler başıma geliyor da takıyorum onlara. Mantık, başta saçma geliyor da zaman içinde anlaşılıyor. Hanım sıkıldım bu hafta sonu değişik bir şeyler yapalım evde olmayalım dedi, hafta sonunu hastanede geçirdik. İşe gitmekten sıkıldım biraz evde kalalım dedik, Tüm ülke topluca karantinaya girdi. Çocuklar ya okullar açılmasın dedi deprem oldu gibi. Başta kendi kendime "Ya gereksiz yorum yapmaya ne gerek var" dedim ama yorum yapmadan da duramadım :)
Looks cool. 👍
@ugurkenel
10 ай бұрын
Thank you👍
Awesome build!
@ugurkenel
10 ай бұрын
Thank you!
hello, as always it's a feast for the eyes, just beautiful
@ugurkenel
10 ай бұрын
Thanks a lot👍🙏
Beautiful
@ugurkenel
10 ай бұрын
Thanks!
Great job Ugur! I liked the snapping sounds and the way you dealt with the seam lines 😅 the RAM were too bright and well done on taking them down! Keep up the great work 👏🏻👏🏻👏🏻
@ugurkenel
Жыл бұрын
Thank you, glad you like it🙏🙏👍
exceptional f-35 B
@ugurkenel
9 ай бұрын
Thanks a lot👍
I’m new to your channel and this is your second build I’m watching today and I really like the way you finished this F-35 kit. It would be very informative to the viewer if you could add the items you use such as paints, varnish, washes, etc. Many thanks for filming and showing us your builds 🙏 … subscribers +1 😉
@ugurkenel
8 ай бұрын
Thank you very much. It's nice to know it worked for you.Cheers🙏
Depremde tüm maketleri mi kaybettim 😢 Ellerinize sağlık hocam yine bir başyapıt.
@ugurkenel
Жыл бұрын
Çok geçmiş olsun,😔
@nikolateslaelectric
Жыл бұрын
@@ugurkenel sağ olun hocam
Amazing work What colors did you use?
@ugurkenel
Жыл бұрын
Thanks. I used Hataka redline series acrylics. A144 and A054
The video editing is as good as the build and thats saying something. May i ask the grey colour call out,i think you did post shading as well. I like the detail Hasegawa bring to the table,in your view is this one of the better F-35 kits? Ive learnt from your tinting and shading over the decals. Very interesting. Do you use decal solutions. Sorry loads of questions. Thank you for sharing your skill. Enjoyed watching this very much 😊
@ugurkenel
Жыл бұрын
Thanks. Gray(dark gray) is Hataka A144 Dark Sea Grey. Not post shading, original decal colors was too bright,or too light, so i was need to recude it bit by applying dark gray color over decals. But, yes application was like tinting. I used diluted Gray. Hasegawa F-35 is good model for 72 scale. There was no fitting problem and detail was good. But i am sure there are other good F-35 models on other companies. I didnt built them, i cannot say anything about them.
OK, lovely build and great video production! Made it so very easy to watch. Why do you use traditional cement and not a more modern version? Why did you sand the internal circular tube (?) so hard? Love the cockpit glass, not seen that before. The way you created a socket for the stand was ace, again not seen before. Really good, just a shame so many modern jets paint is so bland?! Bob England
@ugurkenel
Жыл бұрын
Hi Bob. I use CA glue, because it dries in a couple of minutes. It makes strong attachment also. Sanding internal circular tube? There were very visible seamlines,mold marks. So i had to sand it. And yes as you said, modern jets means, uniform gray color. Cold war era was the best on this subject.
Great work! Question, do you apply the black wash over a coat of gloss varnish and then apply a matt one?
@ugurkenel
Жыл бұрын
Yes exactly.
Really great work! A question:What were u doing at 17:43?Using main color again?
@ugurkenel
11 ай бұрын
Yes, same gunship gray color, just to reduce the light colors of the decals. Decals stayed too bright beside the main gray.
Perfect, can the opened parts, the canopy, wheels and engine be adjusted or are they still in place?
@ugurkenel
Жыл бұрын
Thank you, the model is builded as out of box. No adjustment is required for these parts.
Harika bir video gerçekten, ellerinize sağlık. Canopy boyamada kullandığınız renkleri hangi ölçeklerde kullandınız acaba?
@ugurkenel
Жыл бұрын
Aynı oranda Tamiya Smoke, Tamiya Clear orange ve X-22 karışımı, bu karışımı yarı yarıya incelitp uyguladım.
@hakancaliskaner8718
Жыл бұрын
Çok teşekkürler
Great build! What was the diameter of the clear tubes you used to pose the model in flight?
@ugurkenel
Жыл бұрын
Thanks a lot. Bigger one is 5mm and the other is 3mm. Tamiya brand.
Hi man. I really liked your models since i discovered your feed in insta. The final look is so complex yet so clean!! How did you manage to get rid of the cloudiness in the canopy glass?? I tinted it as well but became opaque. Looking around i see some people use future or pledge/pronto revive to make it transparent again, but product has been discontinued... 😢
@ugurkenel
3 ай бұрын
Thanks a lot. Canopy tinting is always difficult for me. I failed couple of times on this model. I had to cleanand polish again. As final i airbrushed Tamiya Smoke and Clear mix, then i polished canopy again.
@EduWushu
3 ай бұрын
@@ugurkenel The polish after doesnt get rid of the paint you applied? And thsnk you so much for the answer!!!
@ugurkenel
3 ай бұрын
@@EduWushu Sorry for messege above, i wrote Rafale. I confused. ( my last model was Rafale 🙂) On this model, i airbrushed Tamiya Clear orange and yellow and applied from inside. Than i dipped it in Future (Still i have some Future 😉)
@ugurkenel
3 ай бұрын
@@EduWushu on my last model of Rafale ( check my last post) i airbrushed the canopy with Tamiya smoke and after one day drying time, i polished as standart polishing methods.
@EduWushu
3 ай бұрын
@@ugurkenel oh i havent seen the rafale one yet!! Ill definitely check it out. Thanks a lot and keep the content coming!!
Amazing works. Can you share the size of your acrylic stud? I'm very interested in the inner tube size and the support tube diameter. Really appreciate.
@ugurkenel
Жыл бұрын
Thank you. Big one is 5mm, small is 3mm.
@ztsu8348
Жыл бұрын
@@ugurkenel Do you mind sharing the purchase link of your tube? I bought the same size, but it wasn't hard enough, it was bent when I use it for 1/72 model.
@ugurkenel
Жыл бұрын
I bought it years ago, i dont know where can sell it.
Hello very nice work really empressive !!! what is the reference of your model ? I'm building the HASEGAWA n° 02398 but the decal sheet is not the same ? Ty !!
@ugurkenel
2 ай бұрын
Many thanks. I build it long time ago, i am not sure about reference but my model was representing one of the first F-35s.
Hellow excellent build I have a question how many hours does IT take yOu to make this model excluding drying time
@ugurkenel
2 ай бұрын
Hello. I didnt count is but more or less i finish a model in at least one month.
@Michu32421
2 ай бұрын
@@ugurkenel do IT wilk be around 20/30 hours i guess
Is this 3d printed or injection molded plastic
@ugurkenel
Жыл бұрын
Injection plastic model.
Hi I'd like to do this model, could you list the paints you used? Thanks.
@ugurkenel
3 ай бұрын
I have used Hataka paint set, Dark Sea Gray and Gray .
I think you are a Pilot as well ?
@ugurkenel
Жыл бұрын
Yes i am👍
@canisrigelm0627
Жыл бұрын
Wow really nice . My dream is Pilot , I hope I will be able to fly in the sky’s
Another masterpiece.. but I still hate you 😅
Excellent build, man! However, there is a big mistake: F-35B can hover with open main weapons bay doors only. It uses them as air and gas flow stabilization manifold for stable hovering in place. So you shouldn't do them close if you do a model in a hovering position. In this position they are open.
@maydaypc
Жыл бұрын
Your point can be seen clearly here kzread.info/dash/bejne/eGiZ2piCotHQmZM.html Can F-35B hover without deploying landig gears?
@ugurkenel
Жыл бұрын
Too late, thanks for the information.
When i See how much putty and sanding IS needed,Then i regret buying Hasegawa Kits . Wayyy overpriced !!!
@ugurkenel
4 ай бұрын
In general, it is not a very problematic model. I am a little too obsessed with that subject, sanding,triming… So i am trying to do hard. I dont want to mislead you.