Thanks for the video, wish I watched it before I made mine. So I didn't screw everything up haha, great work!

@SmallScaleFun

Жыл бұрын

Hey! Thank you! I plan to rebuild this model to be more perfect :))

Nice video, thanks. In the right hand the result looks good

@SmallScaleFun

4 жыл бұрын

Thank you for your appreciation. The result is reasonable, is my first model after more than 10 years. The next model, I think, will be a Tamiya Nissan 370 z if I will be prepared for it.

Why did I builded the same thing, but this guys done like 1000% better than me

@SmallScaleFun

2 жыл бұрын

LOL I'm sure that your model is better than mine

I intend to improve this model a bit. I'm not a fan of the details, they seem a bit too crude and I'm surprised that Revell hasn't improved on this one. I want to carefully drill the windows and put a clear plastic and also cut a hole in the engine front and add some details inside, like spinning blades. I feel it would improve this model a lot. I know it's a small and cheap model, but this is no excuse for Revell. They could have easily made those engines look just a bit more realistic. Also, some better details on the landing gear.

@SmallScaleFun

6 ай бұрын

Hey! Sorry for my late response. I was very busy. Yes, you are right, Revell needs to add more details on their plastic models like this even if they are cheap. This Boeing was my first model built after a break of approx 10 years. I bought another kit to improve the engine (they are hilarious) and intend to add a runway to :)

Good work.

@SmallScaleFun

4 жыл бұрын

Thank you!

Nice vid, so asmr 👍

@SmallScaleFun

2 жыл бұрын

Thank you!

How do you get the decal by the front in the right place? At my model te decal doesn’t fit perfect

@SmallScaleFun

4 жыл бұрын

It was very hard, I can tell you for sure. At first, I was thinking that I do something wrong, but the model is not perfect so I do like this - start with the decals from one side (left or right) and go with the decals from the front to the back of the plane. After you finish one side start from the back of the plane for the other side, first prepare all the decals and see how they fit (you can adjust the decals if they are longer) and use Tamiya Mark fit strong but only after you place the decal on definitive position and adjust the decal as better you can in first 30 seconds after you apply Tamiya Mark fit Strong. All the best!

But everyone is like using an airbrush! I don't have room for it sadly. But you model came out great!

@SmallScaleFun

4 жыл бұрын

Hey, thank you for your appreciation. I use my kitchen for airbrushing and I get a cheap airbrush, It is an entry-level that costs me around 100 $ (is like training for further models) but I also use, for definitive touch, the brushes supplied with this kit. And for air, I bought a cheap compressor (I use this compressor on my nail stamper) with an air pressure regulator that has a 25 litter air reservoir. You have to be careful when you set the pressure and is working great. (note that a special airbrush compressor will be more useful but when you have a tight budget you improvise)

@GabrielViana-mg3vh

4 жыл бұрын

@@SmallScaleFun Thanks for this reply! I see that not all air brushes require a garden and that much. room

@SmallScaleFun

4 жыл бұрын

@@GabrielViana-mg3vh Yep, your right. Keep in mind that you need a lot of research before buy or do anything. I use Harder & Steenbeck Ultra 2 in 1 airbrush after a couple of hours of reading to see a proper airbrush for beginners and I'm please about my choice. It is really impressive what a relatively cheap airbrush can do. I intend to upgrade my equipment in time, but for this moment, this airbrush is more than what I need. See you at the next video :)

Hey just advice to save glue for other models u can don't do a line where u are gluing just dab the glue in important areas to save glue and time

@SmallScaleFun

3 жыл бұрын

Thank you for stopping by and comment! It was my first model after a long time, now I'm more careful with glue :) Thank you for your tip!

I’m not a big fan of Revell kits. Too much flash and the parts don’t fit together very well. But you did the paint and decals well and salvaged the kit.

@SmallScaleFun

3 жыл бұрын

Hey! Thank you for stopping by and comment and for your appreciation. Yes, you are right; they have a lot of fitting problems, but I bought a new Boeing 747 kit to build it more perfectly :))

@The_last_prime

Жыл бұрын

you are a menace, old revell kits are the ones your probably talking about but the newer ones are amazing. try building the newer one but be careful because a good deal of the old kits get repackaged and bam theyre new kits

wow continue

@SmallScaleFun

4 жыл бұрын

Thank you! Already working on a Revell lever 4 1:72 scale aircraft.

Im more of an airfix person but in a beginner for revell

@SmallScaleFun

3 жыл бұрын

Revell is making good kits like Airfix. I want to try an Aston Martin kit from Airfix thought :)

Mua ở đâu đấy❤

Nice but you didnt show how to glue the engines its alr though Thanks a lot

@SmallScaleFun

11 ай бұрын

Hey! It was my first video on this channel and I dind't really know how and what to film. But I intend to rebuild this kit :)

What grit sandpaper do you use?

@SmallScaleFun

2 ай бұрын

For such small planes 1500-2000-2500 grit sandpaper

@BitLife12

2 ай бұрын

@@SmallScaleFun Ok thank you a lot!

@SmallScaleFun

Ай бұрын

@@BitLife12 no problem :)

Does this kit come with the paint and the glue

@SmallScaleFun

4 жыл бұрын

Yes, you get a brush, Revell glue, and paints - Aluminium metallic 99, Blue and Gray. The big problem is with Aluminium metallic 99 because the paint clogs the airbrush nozzle, so take care. And a good side is that are water-based.

@cpaustralia1

4 жыл бұрын

Small Scale Fun thanks so much

@SmallScaleFun

4 жыл бұрын

@@cpaustralia1 Also, thank you that you stopped by and comment on this video.

@multifandom6346

4 жыл бұрын

@@SmallScaleFun Hi, I love your model but I didnt get glue, paint or brushes with the plane

@SmallScaleFun

3 жыл бұрын

Hello and sorry for my late response, I miss the comment. You have to look for a complete kit. They can be sold separately.

what about 5 gram weight in the nose of fuselage?

@SmallScaleFun

4 ай бұрын

I forgot about that :))

@user-re6ir1ux1k

4 ай бұрын

@@SmallScaleFun but in your case it no need, cause you choose plane mode without wheels

Now crash it into the Pan Am 747 in Tenerife

@SmallScaleFun

9 ай бұрын

:))

@user-re6ir1ux1k

4 ай бұрын

fun and sin

Do not worry, my model result is worst

@SmallScaleFun

3 жыл бұрын

I will do my best for next models

i just making a cardboard plane

@SmallScaleFun

2 жыл бұрын

Lol, ok

근데사고기라니

@SmallScaleFun

Жыл бұрын

I plan to build another one more crisp :)

Errors

@SmallScaleFun

3 жыл бұрын

I may have some errors ...but I always learn from my errors :)) chears

@christophercarrera2005

3 жыл бұрын

Me too with another model

Who you gear men😂🗿😂😂🗿😂 sorry'' joke

@SmallScaleFun

2 жыл бұрын

LOL :))))