Maybe next time, plan a visit with Hayden to Kyle's amazing place. While you're here, you guys can visit Adam LZ's 30-acre compound outside Orlando. It's pretty much Disneyland for cars, go-karts, etc.
@imalec2 жыл бұрын
Really liked your explanation about the bar. Hope he goes with the offset and gusset so that he is able to exit more quickly if necessary. Impressive work Hayden.
@digitald58512 жыл бұрын
Wouldn't if be cool to get Hayden that 100k while he's in Florida?! Let's go!
@joshs1992 жыл бұрын
Sweet. It's really nice seeing the progress on the Rx7 I love build videos. Just watching you figuring out the little things. And building your hotrod to a level that you are proud of and getting her ready to rip.! Great video
@thomaslewis78832 жыл бұрын
You hope you never have to test a cage at 180 mph plus, but it's nice to know it's there and that it was engineered and welded by someone who truly cares about the quality of his work. Thanks for the professionalism.
@bigcaputo092 жыл бұрын
You're a beast with the tig!! You're car is sick as well!! I've Been watching you grow for years with the builds and the welding!! I was a welder in my 20s and loved it!! Especially fabrication. But now I can't breath and it sucks!! I'm 41 ends when i was about 26 i welded about 9 years. That's all it took. I built structural steel and parts and building and home depot racks. I built trailers and truck bodies. Telecommunications buildings! It's important to wear a shield that has fresh air blowing into it our youn you'll regret it!!
@ryansaiki67682 жыл бұрын
Killin it! You should notch a bar and tack it in place where Kyle wants it and let him try getting in and out with it there
@DannySystem2 жыл бұрын
The masking tape idea for finding angles is brilliant. I'm stealing it.
@route222FAQ2 жыл бұрын
Hayden is a beast when it comes to welding! Appreciate all the hard work you put into your craft!!! The lights look really good definitely a fan of the car!
@davidblanck41312 жыл бұрын
Killing it on the content lately. That cage is coming out great. Wish you had time to record when you are swamped in Co. Keep up the great work.
@youshouldknow79692 жыл бұрын
All i gotta say is i bought a mig shirt before I ever bought a boosted shirt 🤷 love the build side of things so much. The time lapse and music is such a plus for me. 💪💯💚🖤🇺🇸
@dereknawman28542 жыл бұрын
Hell yea hope you get the rx7 done
@GeneFever2 жыл бұрын
The 8-rotor starts runs and stops, can't wait to see it on the track. Good work Hayden!
@george2302 жыл бұрын
Keep going strong welds looks good. Your car looks great!
@snowysysadmin592 жыл бұрын
8:44 "its not in focus cause its just not happy with life" lmao idk why that was so funny to me
@carlosyo20112 жыл бұрын
Heck of a channel I’ve been watching you guys since day one wish you put more content but it is what it is always a pleasure to see your skills 👍
@arcadiagreen1502 жыл бұрын
Do the cage your way. Kyle doesn't make the best decisions. He fought us about the laser height sensor, and almost destroyed the car doing wheelies over and over
@normalguyreviews71022 жыл бұрын
You have alot of patience bro .. really good effort and happy to see you doing a good job to potentially save Kyle's life 👏
@lancemiller98662 жыл бұрын
Killing it keep it up great work phenomenal work great video
@BassManBobBassCovers2 жыл бұрын
Big kudos to you man for grinding so hard to get that cage done. You're probably working harder than anyone else there judging by seeing you in the background of everyone elses videos and all the progress on both cars.
@kensmart54002 жыл бұрын
Looking awesome! Can't wait to see you racing the RX7
@chicagovasko2 жыл бұрын
Always doing 👍 Great work.
@wolfparty42342 жыл бұрын
Nice work brother!!! As a fabricator I know how hard it is to bite off more then you can chew but your really knocking it out the park bro!!! Ps. It was cool to see you using the tape trick. Not many people know that one💪🏼💪🏼🔥🔥🔥👍🏻🤣
@natestoops23742 жыл бұрын
You can set that arc panel up to turn off off all the toggles at once when you turn off the main ignition toggle.
@markthompson24402 жыл бұрын
You've come a long way on your car. Your fab work looks 2nd to none... Can't wait to see you running it down the strip .
@herbiederby33942 жыл бұрын
Great work as always man....roll cage looks awesome 💯% on mr2....looking forward to rx7 doing some passes and its lookin good too....🤙🙏
@mikewagner17832 жыл бұрын
Been waiting for this!
@drew538322 жыл бұрын
So stoked too see the progress on the rx7! Congrats Man!
@blaznmax88772 жыл бұрын
Super cool dude love the vids keep it up love to see u and Kyle chilling 😎
@alexcavinee69222 жыл бұрын
Loving the Florida content! Can’t wait for next months video!
@mksaeg2 жыл бұрын
You are an artist in your craft!!!
@hannesviljoen6412 жыл бұрын
Enjoyed your video thanx. Keep them coming.
@rizza75752 жыл бұрын
Looking good! Your fab work is top notch sir.
@cmattdabrat2 жыл бұрын
Looking good! Can't wait to see a first pass.
@kyleleonard60052 жыл бұрын
love your work man.
@miguelplaza6582 жыл бұрын
Awesome job keep it up champ
@jameswyllie96082 жыл бұрын
Really nice work
@SirSquash2 жыл бұрын
cages add weight but the rigidity they add actually equals out to increased speed/acceleration in the long run.
@jeffbamford805
2 жыл бұрын
An the chassis tunability.
@jgetscensored7837
2 жыл бұрын
@@jeffbamford805 assuming the suspension mounts to the cage. But on most unibody cars, the cage is strictly for protection. The suspension typically mounts like stock components
@jeffbamford805
2 жыл бұрын
@@jgetscensored7837 correct and I did assume that an didn't.
@AmfP_892 жыл бұрын
Your work is amazing bro
@thesquirrelchroniclesakare78082 жыл бұрын
Nice work buddy ! Let's goooo
@clearskyy2 жыл бұрын
all of this is so freaking cool
@asbforeignautomotive78582 жыл бұрын
Amazing work man.👌
@ThePeoplesLlama2 жыл бұрын
his work is always clean
@brettsmith862 жыл бұрын
Love watching you weld!!! I need a shirt!
@hondaatcfreak4202 жыл бұрын
Keep up the great work
@EdwardAlcala2 жыл бұрын
Where’s my dawg at?
@adrianlee3675
2 жыл бұрын
Right here Edward
@frankienoshow3612
2 жыл бұрын
Haha there he is!!!
@EdwardAlcala
2 жыл бұрын
@@adrianlee3675 yoooo
@Tom_fromMySpace2 жыл бұрын
Looks good. I would put a grommet on the firewall where your harness pass through
@MoariBoyNz2 жыл бұрын
Yeah. Swing chec nice thumbs up from New Zealand
@skate2401b2 жыл бұрын
The door room is nice go with your way
@joeygude.12022 жыл бұрын
Boyz got skills!
@BubbaGaming2 жыл бұрын
Role Model and a half right here!!
@joshua37692 жыл бұрын
Man's got skills yeeeet
@eriqrosado33372 жыл бұрын
Let’s go!!! It’s about time you drop some shit for us!
@mjboy87902 жыл бұрын
Your car is coming along nicely
@benische2 жыл бұрын
The tape for the door bars was brilliant
@TheBlaqDeval2 жыл бұрын
Great work on the cage! Real pro with the extra bracing and driver's seat protection. Also great work with buttoning up the RX-7 but please tell me the flip ups are still functional on that car.
@whoknows33472 жыл бұрын
Show how u tie it to the body...
@MintyFreshGarage2 жыл бұрын
Damn! You got a bunch of stuff done on the rx7! She ready for the trip to my place or what?
@Headsup95502 жыл бұрын
You had a 08+ truck starter. Just as strong, just smaller. A lot of people use them for header/motor mount clearance
@RusselHartney2 жыл бұрын
Can't wait for testing and race day. Been waiting 2 years, just after you blew up the old 8 rotor on Brent's dyno.
@paulezay35992 жыл бұрын
Boom baby let's go
@bigbulldragon2 жыл бұрын
When Kyle gets back, hold a bar in each position, as he wants it and as you suggest it and let him try getting in and out with suit and helmet on. He will probable see your way, safer is better.
@tomr11072 жыл бұрын
Youve come a long way since that twin turbo intercooler build you did with a jig saw lol.
@winstonpaul33982 жыл бұрын
Bravo dude ... ❤️
@chadbanks76112 жыл бұрын
Oh yeah
@samuelrogers20332 жыл бұрын
best kept secret. you need more recognition bro
@toothpastebo36632 жыл бұрын
What are you thoughts on the finger button instead of the foot pedal. There is a modulating one that works just like a pedal. Seems it would make your life easier
@jordansrc84832 жыл бұрын
Damm bout time 😂👍 Jk lol keep the great content rollin Hayden👍
@Nerdless422 жыл бұрын
Your on a roll bro
@rsharney1111
2 жыл бұрын
A roll cage...
@ismeirygabriel11482 жыл бұрын
🔥🔥🔥🔥🔥
@stayathome3162 жыл бұрын
Hair game strong!
@okobojian18602 жыл бұрын
Good job kid
@Kenny-bm9lf2 жыл бұрын
Yoo im in key largo what's up with me being a boosted boyz got a cb7 w h22 no tuners here!! And no welders all butt dyno. Love it guys keep ot up
@JnixMarshel
2 жыл бұрын
Shoot your shot pimp. 😂
@rsharney1111
2 жыл бұрын
That was my favorite car. So damn smooth. The 2.25" with a hushpower2 res and a dual tip Magnaflow sounded sick. Bitch got stolen 3 times tho.
@anthonymayes13402 жыл бұрын
Might want to check to make sure your light placement is legal for your state I know Washington your headlights must be above or parallel with the marker/turn signals. Just a heads up but love the work car looks sick
@chrisgriffin33742 жыл бұрын
Nice job 🤘☠️
@8134brad2 жыл бұрын
I have. not , I got. lol great work
@zethloveless72382 жыл бұрын
Ayyy I’m here for my favorite two lesbians Witt and gayden. Good to see all the bros back together rn 😛 much love 🤘
@justinw_tbss_dadvan94472 жыл бұрын
Ls starters . 2006 and up are smaller in size at that I have found. Stock Ls1 starters are lot bigger compared to stock ls2 or ls3 starter
@stuntoholics21102 жыл бұрын
Can you show the tape trick you did. And explain it?
@nothingimportantlol2 жыл бұрын
This car is a dream..
@swarf72512 жыл бұрын
Looks like you need to caint your page. Both cars looking awesome
@hondaatcfreak4202 жыл бұрын
Ever thought bout breaking down the welding tools you recommend ??
@edmundkare55622 жыл бұрын
Where did you get those lights? I need to get a set of those!!!
@mountainsgarage2 жыл бұрын
Do you have driveshaft containment and transmission/ flexplate shields? I haven’t seen that in your videos.
@keefespencer11732 жыл бұрын
You should just go ahead and hit up Motion Raceworks and get a PowerMaster mini starter that way if you ever want to bump the compression up it will have all the cranking amps you'll ever need my car has 13.5:1 compression and they start my car right up no problem plus you don't have to worry about how tight of the space is that you have under the car between the block and the frame rails and you don't have to really worry too much about the head space of the starter or anything like that and I still think when you get the money up you should check into getting a TKM built Black Sheep Stage 3 engine with a Hydraulic roller camshaft or a Solid roller camshaft but if you go with a Solid roller camshaft you should get a 454cid instead of the 472cid LSX-R and you should get a dry sump oil system and put either a single Precision XLR "Pro Mod" style 98mm or a single Harts 102mm turbo along with a set of Precision 550 gph injectors or Fuel Tech 525gph injectors along with a Fuel Tech FT600 and all the other Fuel Tech goodies
@who_is_asking2 жыл бұрын
Do you have to heat treat the chromemoly after welding it? Is it OK to run it without heat treat?
@hahnmowermotorsports1792 жыл бұрын
Are you using a torch switch for some of the welds or a foot pedal for all of them? I’m working on my tig welding and often have to weld stuff at weird angles. I’ve never tried a torch switch.
@TunerFreak2 жыл бұрын
nicee
@jessehorvath56472 жыл бұрын
Are you going to do another diagonal bar on the roof?
@markbrown22962 жыл бұрын
"Hoop Dreams"!
@Stevesbe2 жыл бұрын
You got a stock flexplate on the rx7?
@thed50562 жыл бұрын
Dude what light are they and where can I get them
@Stiffclits4202 жыл бұрын
Hey is this the world first cage in an MR2?
@bendover-uf9st2 жыл бұрын
👌
@richr5422 жыл бұрын
What size tubing
@belcebu59072 жыл бұрын
BLONDIE. IM NUMBER ONE 💪💪
@byrdb902 жыл бұрын
Can’t wait to see the rx7 makin passes
@kik00132 жыл бұрын
Are you going to put a wing on the back or nah ?
@minibikemadman2 жыл бұрын
When ya moving to FL lol
@gradybaby83092 жыл бұрын
lookin like Florida life with that awning hangin over your forehead... lol... Kyle get the clippers...
Пікірлер: 143
Miss you here in colorado dumbledwarf
@drew53832
2 жыл бұрын
Lol
@thomaslewis7883
2 жыл бұрын
Maybe next time, plan a visit with Hayden to Kyle's amazing place. While you're here, you guys can visit Adam LZ's 30-acre compound outside Orlando. It's pretty much Disneyland for cars, go-karts, etc.
Really liked your explanation about the bar. Hope he goes with the offset and gusset so that he is able to exit more quickly if necessary. Impressive work Hayden.
Wouldn't if be cool to get Hayden that 100k while he's in Florida?! Let's go!
Sweet. It's really nice seeing the progress on the Rx7 I love build videos. Just watching you figuring out the little things. And building your hotrod to a level that you are proud of and getting her ready to rip.! Great video
You hope you never have to test a cage at 180 mph plus, but it's nice to know it's there and that it was engineered and welded by someone who truly cares about the quality of his work. Thanks for the professionalism.
You're a beast with the tig!! You're car is sick as well!! I've Been watching you grow for years with the builds and the welding!! I was a welder in my 20s and loved it!! Especially fabrication. But now I can't breath and it sucks!! I'm 41 ends when i was about 26 i welded about 9 years. That's all it took. I built structural steel and parts and building and home depot racks. I built trailers and truck bodies. Telecommunications buildings! It's important to wear a shield that has fresh air blowing into it our youn you'll regret it!!
Killin it! You should notch a bar and tack it in place where Kyle wants it and let him try getting in and out with it there
The masking tape idea for finding angles is brilliant. I'm stealing it.
Hayden is a beast when it comes to welding! Appreciate all the hard work you put into your craft!!! The lights look really good definitely a fan of the car!
Killing it on the content lately. That cage is coming out great. Wish you had time to record when you are swamped in Co. Keep up the great work.
All i gotta say is i bought a mig shirt before I ever bought a boosted shirt 🤷 love the build side of things so much. The time lapse and music is such a plus for me. 💪💯💚🖤🇺🇸
Hell yea hope you get the rx7 done
The 8-rotor starts runs and stops, can't wait to see it on the track. Good work Hayden!
Keep going strong welds looks good. Your car looks great!
8:44 "its not in focus cause its just not happy with life" lmao idk why that was so funny to me
Heck of a channel I’ve been watching you guys since day one wish you put more content but it is what it is always a pleasure to see your skills 👍
Do the cage your way. Kyle doesn't make the best decisions. He fought us about the laser height sensor, and almost destroyed the car doing wheelies over and over
You have alot of patience bro .. really good effort and happy to see you doing a good job to potentially save Kyle's life 👏
Killing it keep it up great work phenomenal work great video
Big kudos to you man for grinding so hard to get that cage done. You're probably working harder than anyone else there judging by seeing you in the background of everyone elses videos and all the progress on both cars.
Looking awesome! Can't wait to see you racing the RX7
Always doing 👍 Great work.
Nice work brother!!! As a fabricator I know how hard it is to bite off more then you can chew but your really knocking it out the park bro!!! Ps. It was cool to see you using the tape trick. Not many people know that one💪🏼💪🏼🔥🔥🔥👍🏻🤣
You can set that arc panel up to turn off off all the toggles at once when you turn off the main ignition toggle.
You've come a long way on your car. Your fab work looks 2nd to none... Can't wait to see you running it down the strip .
Great work as always man....roll cage looks awesome 💯% on mr2....looking forward to rx7 doing some passes and its lookin good too....🤙🙏
Been waiting for this!
So stoked too see the progress on the rx7! Congrats Man!
Super cool dude love the vids keep it up love to see u and Kyle chilling 😎
Loving the Florida content! Can’t wait for next months video!
You are an artist in your craft!!!
Enjoyed your video thanx. Keep them coming.
Looking good! Your fab work is top notch sir.
Looking good! Can't wait to see a first pass.
love your work man.
Awesome job keep it up champ
Really nice work
cages add weight but the rigidity they add actually equals out to increased speed/acceleration in the long run.
@jeffbamford805
2 жыл бұрын
An the chassis tunability.
@jgetscensored7837
2 жыл бұрын
@@jeffbamford805 assuming the suspension mounts to the cage. But on most unibody cars, the cage is strictly for protection. The suspension typically mounts like stock components
@jeffbamford805
2 жыл бұрын
@@jgetscensored7837 correct and I did assume that an didn't.
Your work is amazing bro
Nice work buddy ! Let's goooo
all of this is so freaking cool
Amazing work man.👌
his work is always clean
Love watching you weld!!! I need a shirt!
Keep up the great work
Where’s my dawg at?
@adrianlee3675
2 жыл бұрын
Right here Edward
@frankienoshow3612
2 жыл бұрын
Haha there he is!!!
@EdwardAlcala
2 жыл бұрын
@@adrianlee3675 yoooo
Looks good. I would put a grommet on the firewall where your harness pass through
Yeah. Swing chec nice thumbs up from New Zealand
The door room is nice go with your way
Boyz got skills!
Role Model and a half right here!!
Man's got skills yeeeet
Let’s go!!! It’s about time you drop some shit for us!
Your car is coming along nicely
The tape for the door bars was brilliant
Great work on the cage! Real pro with the extra bracing and driver's seat protection. Also great work with buttoning up the RX-7 but please tell me the flip ups are still functional on that car.
Show how u tie it to the body...
Damn! You got a bunch of stuff done on the rx7! She ready for the trip to my place or what?
You had a 08+ truck starter. Just as strong, just smaller. A lot of people use them for header/motor mount clearance
Can't wait for testing and race day. Been waiting 2 years, just after you blew up the old 8 rotor on Brent's dyno.
Boom baby let's go
When Kyle gets back, hold a bar in each position, as he wants it and as you suggest it and let him try getting in and out with suit and helmet on. He will probable see your way, safer is better.
Youve come a long way since that twin turbo intercooler build you did with a jig saw lol.
Bravo dude ... ❤️
Oh yeah
best kept secret. you need more recognition bro
What are you thoughts on the finger button instead of the foot pedal. There is a modulating one that works just like a pedal. Seems it would make your life easier
Damm bout time 😂👍 Jk lol keep the great content rollin Hayden👍
Your on a roll bro
@rsharney1111
2 жыл бұрын
A roll cage...
🔥🔥🔥🔥🔥
Hair game strong!
Good job kid
Yoo im in key largo what's up with me being a boosted boyz got a cb7 w h22 no tuners here!! And no welders all butt dyno. Love it guys keep ot up
@JnixMarshel
2 жыл бұрын
Shoot your shot pimp. 😂
@rsharney1111
2 жыл бұрын
That was my favorite car. So damn smooth. The 2.25" with a hushpower2 res and a dual tip Magnaflow sounded sick. Bitch got stolen 3 times tho.
Might want to check to make sure your light placement is legal for your state I know Washington your headlights must be above or parallel with the marker/turn signals. Just a heads up but love the work car looks sick
Nice job 🤘☠️
I have. not , I got. lol great work
Ayyy I’m here for my favorite two lesbians Witt and gayden. Good to see all the bros back together rn 😛 much love 🤘
Ls starters . 2006 and up are smaller in size at that I have found. Stock Ls1 starters are lot bigger compared to stock ls2 or ls3 starter
Can you show the tape trick you did. And explain it?
This car is a dream..
Looks like you need to caint your page. Both cars looking awesome
Ever thought bout breaking down the welding tools you recommend ??
Where did you get those lights? I need to get a set of those!!!
Do you have driveshaft containment and transmission/ flexplate shields? I haven’t seen that in your videos.
You should just go ahead and hit up Motion Raceworks and get a PowerMaster mini starter that way if you ever want to bump the compression up it will have all the cranking amps you'll ever need my car has 13.5:1 compression and they start my car right up no problem plus you don't have to worry about how tight of the space is that you have under the car between the block and the frame rails and you don't have to really worry too much about the head space of the starter or anything like that and I still think when you get the money up you should check into getting a TKM built Black Sheep Stage 3 engine with a Hydraulic roller camshaft or a Solid roller camshaft but if you go with a Solid roller camshaft you should get a 454cid instead of the 472cid LSX-R and you should get a dry sump oil system and put either a single Precision XLR "Pro Mod" style 98mm or a single Harts 102mm turbo along with a set of Precision 550 gph injectors or Fuel Tech 525gph injectors along with a Fuel Tech FT600 and all the other Fuel Tech goodies
Do you have to heat treat the chromemoly after welding it? Is it OK to run it without heat treat?
Are you using a torch switch for some of the welds or a foot pedal for all of them? I’m working on my tig welding and often have to weld stuff at weird angles. I’ve never tried a torch switch.
nicee
Are you going to do another diagonal bar on the roof?
"Hoop Dreams"!
You got a stock flexplate on the rx7?
Dude what light are they and where can I get them
Hey is this the world first cage in an MR2?
👌
What size tubing
BLONDIE. IM NUMBER ONE 💪💪
Can’t wait to see the rx7 makin passes
Are you going to put a wing on the back or nah ?
When ya moving to FL lol
lookin like Florida life with that awning hangin over your forehead... lol... Kyle get the clippers...