This is an old build series I've compiled into one video. At the time of original recording, Bandai Star Wars kits were not available for sale in the United States. That eventually changed and they are now available.

@muonwap

3 жыл бұрын

do you have a video showing how you display or store your finished models/

@ThePaintingClinic

3 жыл бұрын

@@muonwap Most all are on display at different local model shops.

I literally just got this model at my local hobby and craft shop. There was only one on the shelf, so I grabbed it. 😁

Awesome video, lots of details, and good heads up about potential problems. I will be referencing this vid heavily for my build

16:30 I had the thigh joints of my 1/144 scale AT-ST plus one of the guns of my snowspeeder fall apart after weathering with thinned out black enamel paint. I had to stick them back together with CA. I had never seen that before, it caught me by surprise. Guess I'm going to have to learn to weather with acrylics for all my Bandai stuff.

Great video! I learned a lot! I just started building models again after 50 years. I'm trying to improve on "all" the model building skills I had back when I was 10 years old. Any improvement I learn now will easily improve my old skills. Thanks for the video and knowledge you share! Eric (Edit): By the way, I have damaged a Bandai AT-ST using enamel paints/weathering. Especially in the "small/thin" plastic jointed areas of the model. Sprayed a clear coat after painting and before the wash but still had problems! Just a thought on my limited experience. Thanks

Great and helpful video. I really appreciate it. Just starting again after 30 years. One tip regarding 6:30 assembling the foot. Seeing Instructions 3.2 and 5.2 you are advised to follow steps 1 to 4. So first put on the upper part (Step 3) then attach the lower plate (Step 4). It will be much easier.

I wish I could afford their big Millennium Falcon kit. The AT-ST is the only one I’ve done so far, and it was one of the best model building experiences I’ve ever had.

Looks awesome, good job!!

doctor its a wonderful veinte,Bravo!

I live in Charlotte North Carolina you can get these model kits at hobby lobby everywhere around here...

Bought one today at hobby lobby on sale for 17.99.

I bought my AT ST from my local hobby Lobby in orlando, florida

Good video!👍✨

Painting mine as a German what if . Marching down the Ardennes Forest. Was coming out great until I applied a Mig wash. The leg joints melted and both failed. Trying to repair it , but looks hopeless. I primed with Mr Hobby 1000 and clear coated , but I fear I did not wait long enough for it to cure. Waiting to see once the enamel cures if I can salvage it.

Correction they used to be sold on the U.S.A market, and Bluefin started to implement to retailers along with the stronger push for Gunpla. Revell then decided to cry and moan to Disney over Licensing and distribution of Star Wars Model kits to be region based. They knew their kits sucked when compared to Bandai's kits. They didn't want to step up to the plate and either co exist or try new or innovative kits. So Revell is the the main distributor for their Star Wars kits on the U.S.A and European markets, and Bandai's Star Wars kits are left to their local market in Japan. Recently some Hobby Lobby shops, Barnes and Noble, and comic shops started carrying certain Star Wars kits. The downside is they are slightly overpriced when compared to their original Japanese MSRP. Even so they are worth the buy, because you get what you pay for. A good detailed display piece for any builders collection.

I think the weathering would have been easier by putting some odorless thinner on the model first, followed by the streaking grime. hit it with a flat brush and done. love the way this one turned out

Hmm, I bought mine at Hobby Lobby here in Kentucky a couple months ago. 2022

A great kit. Nicely done.

@ThePaintingClinic

3 жыл бұрын

Hey Scott! (Hope I'm remembering your name right) Still building? Still got my SMA beanie

@scaleModelAddict

3 жыл бұрын

@@ThePaintingClinic getting back into it.

I found hot solvents will cause the plastic to crack and any exposed plastic will be be affected. I found out the hard way on the Bandai C3-PO kit. Instead of stripping and repainting over the plate I just weathered on top.

Would you do more of the bandai star wars kits

wich gloss/ satin coat used?

9:43 Can you please tell us what product you used to primer(and maybe what you would have suggested for a different color) and also how you kept primer away from snap pegs and holes, either from the outside or the inside? I have a feeling that if I primer separate pieces other than when the model is put together, i will cause nothing to fit again unless I do some seriously tedious repair work. I know this is a year old but I just bought it and have learned a lot especially the tight fit on the feet. I have finished one leg and the middle section so far. Also at 21:22 you said you primered it alclad black and I am confused as to whether or not you primed it twice. Thank you for the video, liked and subscribed!

I actually got mine at Hobby Lobby, 40% off too.

Every hobby shop by me sells these kits. Not hobby lobby. But the actual model and train hobby shops have these kits. Ive never heard of Japanese exclusives. Where’d you hear that from.

I got this at Hobby Lobby 2 days ago.

WELL yes looks god to me do not know if did the inside but hek will see as post new as post em

This has been awesome, love the longer format video, is there any chance we could see the 3 legged Titan build in this format too?

@ThePaintingClinic

3 жыл бұрын

Yes.

@neilkirkley1500

3 жыл бұрын

@@ThePaintingClinic Legend!

Great video! When you say All Clad black primer, do you mean something like a Tremclad spray can, or is it some kind of airbrush primer? I've been using the Vallejo rattle can primers, but I'd love to find something more durable, but still has a pretty fine spray.

@ThePaintingClinic

3 жыл бұрын

Alclad brand lacquer primer.

I just bought 3 from my local Hobby Lobby

@HollywoodColt

3 жыл бұрын

Michael's had some too.......

@barelysuper4129

3 жыл бұрын

My point is the same. Dont know why he thought these were rare.

@danrafferty4346

3 жыл бұрын

@@barelysuper4129 I didn't see that this video is old and he just re-released it, until after I posted the comment.

@ThePaintingClinic

3 жыл бұрын

Apparently everyone missed it. Wish I could circle the pinned comment with blinking arrows.

@HollywoodColt

3 жыл бұрын

@@ThePaintingClinic Oh now I see it......

My AT-ST crumbled at an ankle joint after I did the enamel wash. Looking at making a dio now so I can hide the ankle in bushes

'I've been told that enamel wash melts bandai models but I'm going to enamel wash it' 5 minutes of video time later 'It melted so I got another one' I laughed. Sometimes you just have to try for yourself!

I bought this at Hobby Lobby. I didn’t check how old this video is.

Como comprar uma item Dexter do mesmo do vídeo

You can go to hobby lobby now and get it⚠️

I've got the same kit sitting in my closet... only one hour to finish it? Wow! I'll get started right away! And type very bad comments, when I take longer for some reason! ;) *duck*

@raWeird

3 жыл бұрын

i needed a few days...

@mechachrist

3 жыл бұрын

It can be done pretty fast. It goes together like a dream, honestly. They make great products. I took several days because I like to extend the fun lol. This is the only Bandai kit I’ve done so far, and they won me over in minutes. You’ll love it.

I building this little chicken walker right now. The pilots are a disappointment. I am thinking about heating the arms up and trying to bend them. I had zero problems with the feat so maybe they've been fixed.

You mentioned that it didn’t say where to glue & where not to glue; if it’s anything like their Gundam kits is no glue anywhere!

Hi! In your video about painting an imperial knight (kzread.info/dash/bejne/lotorNung9zUlrQ.html) you mentioned using future shine and also used a mixture to spray on the armor to weather it. Could you explain how you applied the future shine, what product should I use? I'm trying to replicate your result and tried a spray varnish and it ruined my first paint job :(

Him: Not in the USA Me:laughing at a Hobby Lobby in the USA

@ThePaintingClinic

3 жыл бұрын

You: Not reading pinned comment.

Jokes on you i found mine at Hobby Lobby

You don’t glue anything on Bandai kits. They are perfectly molded so you don’t need glue. If you glue your just asking for trouble.

Try to buy this "direct" from amazon, not Japan. These starwars kits are common. Ive also seen these kits in michaels and Hobby Lobby. Bandai Starwars kits are easily attainable in US retail.

@l1zrdking

3 жыл бұрын

Its on Amazon, 42 bucks give or take, I have no idea if thats a good price or not, just that its there, and its Prime.

You're Seth Rogen aren't you