Build your own power hammer, cheap!!!
Автокөліктер мен көлік құралдары
I make a decent homemade power hammer out of junk laying about my place #warpedhammer
Please check out and subscribe to these guys
Southdown Waters Forge
/ @southdownwatersforge
Impact Junky
/ @impactjunky
Rusty Pearson
/ @rustypearson
Warped Legacy
/ @warpedlegacy
Follow me on Instagram
Pauls_garage_and_forge
Check it out!!
Does anybody even read this stuff??
Пікірлер: 147
I feel sorry for all who did not watch to the very end
@oldskoolonly
5 ай бұрын
Haha glad you did!! Cheers, thanks for watching 🍻
@johnny4eel
5 ай бұрын
@@oldskoolonly 👍
Mate!!! Everything about this video makes me happy. Love the ending. Thanks for the shout out!
Putting my design together now as I scrounge for materials - thanks for sharing your build! Cheers!
Good idea. Now I'm going to have to give it a go. Thanks
Totally enjoyed your vid and especially the end. I’m just gathering parts around my place to put a hammer together. Thank you for the reference material and the great entertainment. More power to ya, from Wyoming, USA
@oldskoolonly
3 жыл бұрын
Cheers, glad you enjoyed it 👍🏻
I love this old saw!
Great job. Thank you 😊
Looks like you got all the fixins for a nice T Bucket.
Playing your guitar with the hammer rhythm section sealed the deal for me..Awesome!
@oldskoolonly
3 жыл бұрын
Haha cheers man, thanks. That was a fun video to make 🍻
Loved your vid loved your humour. I can relate to so much as I’m always fabricating something, comments like a flat garage floor, looking for steel “ah some 30mm reo “ !! I like making blades axes and knives so to have a go at forging would be a buzz. Your plucking sounded ok to.
@oldskoolonly
3 жыл бұрын
Cheers man, glad you enjoyed it 👍🏻
This is one of the best experiences i've ever had on youtube. Awesome idea with that tire by the way, did'nt think of that.
@oldskoolonly
5 ай бұрын
Cheers for that!! Much appreciated 🍻
Ha ha I cut my RR track anvil with my power hack saw with a regular hand hacksaw blade I. It... it didn’t take long but it was such a crooked cut I had to re cut it and grind it with the angle grinder!! Lol
That's a pretty awesome death machine you got there.
Fantastic, subbed mate 👍
Great man
This looks good I'm simple
The guitar and power hammer made me subscribe
@oldskoolonly
3 жыл бұрын
Haha had a lot of fun making that video, glad you enjoyed it. Thanks heaps 🍻
Good teacher
Just found your channel mate like what I see .
@oldskoolonly
3 жыл бұрын
Cheers man 🍻
It was the last ten seconds that got me to hit the like botton.
Cypress pine which has nothing to do with this project. That was so funny I spit my chew out
@lenasnell1734
3 жыл бұрын
😂😂
HASTA HOY EL MEJOR VIDEO QUE E VISTO ERES PRACTICO PARA QUE COMPLICARSE LA VIDA FELICIDADES HOMBRE
Hey, that thing has good rhythm! Hahaha it's nice to see a smith that can weld. I have yet to see a smith on Forged In Fire that can actually weld.
@oldskoolonly
3 жыл бұрын
Haha Cheers man, thanks for watching 🍻
Exelente... 👏👏👏👍
at first run i thought: it´s making music. i can see, that at the end i wasn´t only person, who noticed :D
We forgot a hard work or something bad with your teraphy MUSIC!!! NICE P. HAMMER AND USEFULL,all the best in 2021!!
@oldskoolonly
3 жыл бұрын
Cheers Dan. You too for 2021 🤙🏻
Great build mate and really enjoyed watching.
@oldskoolonly
3 жыл бұрын
Thanks for that, glad you enjoyed it
How long did it really take to cut the track
@oldskoolonly
3 жыл бұрын
Haha took a few hours
Can u say what's the power of the motor and rpm?
very nice non-adjustable metronome...
What size motor you use
@oldskoolonly
4 ай бұрын
1/4hp
1:56 subscribed
@oldskoolonly
3 жыл бұрын
Cheers man 🍻
That's a diy power drum! Hahaha...
Might have been faster to cut the track with a torch
Is it a Hagström?
@oldskoolonly
Жыл бұрын
1966 Kay Speed Demon
@christervikstrom5431
Жыл бұрын
@@oldskoolonly Ok I didn't see the whole guitar, I myself have a bass Hagström Concord from 1968. Greetings from Sweden.
I want see it smashing some hot steel.
@oldskoolonly
3 жыл бұрын
kzread.info/dash/bejne/l4WlmMtso9S_d6g.html
@LarryM5291
3 жыл бұрын
@@oldskoolonly Yeah I saw that after I watch the first one.
👍👍😎
красава.
Best way to avoid burning holes in your pants while you're welding is wearing shorts
@oldskoolonly
3 жыл бұрын
Hahaha noted 😄
Brother this is the best vid I've watched on making a power hammer, but pro's and con's Pro's: Great vid Welding in shorts, need sandals though Scrapping from old shit Pit bull in the back ground, a big plus!! Great design Functionable Your accent, it seems Australian but hey I'm from Tennessee everyone has an accent besides us:} Tattoos Music Scrapping, uh I've said that already Cons: Not enough tattoos Not enough old school punk music No dimensions, at least I've not found them yet Great video , just need some kind of dimensions and at least on your sound track, if you are from Down Under, some Lime Spiders. Thanks brother
@oldskoolonly
3 жыл бұрын
Hahaha cheers for the feedback!! Merry Christmas man and thanks for watching 🍻
@markb4106
3 жыл бұрын
Merry Christmas my friend. May you and your family be blessed this Great Day
i wish he had said what kind of motor it was
@oldskoolonly
3 жыл бұрын
Man it was just a random old 1/4hp 240volt electric motor I had kicking about. You could use whatever you can find. An old washing machine motor would do the trick. Thanks for watching 🤟🏻
@codeym8070
3 жыл бұрын
@@oldskoolonly Thanks for the reply bro! I've been building plans for my own power hammer, and I just don't know dick about motors lol. To be specific I'm trying to create a power hammer that can be completely modular. Hammer weight, workpiece overhead, and speed... I've gotten the whole thing worked up BUT the motor. For some reason like no one says what motor they use
@oldskoolonly
3 жыл бұрын
Sounds good man. I can’t speak for others but I just used what I had lying about and it worked out ok
@codeym8070
3 жыл бұрын
@@oldskoolonly I definitely could make one for myself easily enough. But I'd like to offer these plans to the community for free when I'm done. Imagine having a power hammer that can be a 50 lb tuned for doing detail work, and in 10 minutes switching it to a 200lb deadblow for super large projects. All for under 500$ of material.
@oldskoolonly
3 жыл бұрын
Sounds great
Hey for your next challenge, try to make a video that doesnt require constant audio adjustments! Great ending
@e.l.j49
3 жыл бұрын
Don't be a dick mate
No really how long to cut through the railroad track 🛤
@oldskoolonly
3 жыл бұрын
Haha actually took ages. Was a while ago but from memory it was a few hours
Enough welding already shit
@oldskoolonly
3 жыл бұрын
Cheers man, really appreciate the feedback 😉
Love it. Solid and simple
You are a madman.... And I love it! Great job! Thanks for the shout out!
Haha! I love the ending! :) Nice build. I'll use some ideas for my own next Summer.
Wow amazing effort and result, i like the humour too. Southdown waters sent me. Cheers
First off, thanks for the shout out, your a gentleman and a scholar. Secondly, you made that look way too easy. Jealous beyond belief! What a champion! I read the title and expected a power cord hanging out of a claw hammer! 🔨 I'll be sure to return the favour in tomorrows video. Amazing work. And song too!
@SouthdownWatersForge
6 жыл бұрын
Paul's Garage and Forge how long do you reckon it took?
Nice hammer build. I can't wait to see what you make with it.
Bloody awesome mate! Southdown is right, you made that look too easy! Best tyre hammer build vid I've seen... two weeks later... 👍
That ending was brilliant.
God bless your patience. Liked and subscribed just because you didnt go ballistic waiting for that track to be cut
Ok... that’s pretty freakin sweet!
that's a bloody great build mate, looks better than a bought one
thanks for project..i'm from Brazil..
haha the end is awesome =) great job
Good Job ,Bro! I subscribed . Very good video! You've given me a lot good ideas. Thanks!
Hi Paul ! Nice work! 👍 👍 👍
Super Awesome!! Actually a power hammer is on my 2018 List too😂👍👍
Awesome build man....absolutely brilliant! Would love to build one of these but havn't got the room in my shop. Great job, thumbs up!
Haha Love the guitar and beat haha
The never ending rail sawing earned a subscribe XD
Lol epic once again! If I ever come to Australia I want a come have a beer with ya mate! Cheers
Great Video man, Keep going strong your channel will grow in no time
Nice build sir.
=O that powered Hacksaw is awesome! I want one xD
Great video!
Some people are just naturally talented.
Thanks a million for the shoutout Paul, I really appreciate it!
@Impactjunky
6 жыл бұрын
By the way congrats on reaching 200 subscribers, and Happy Australia Day! I was gonna do a video of driving my valiant around, snacking on Tim Tams and listening to ACDC and then mirror the film in editing so it looked like the wheel is on the other side of the car. But unfortunately a freeze plug popped out of it in those single digit temps a couple weeks back and I just found out about it today, let it be known that StopLeak is not a sufficient anti freeze substitute.
from West Virginia nicely done sir
Awesome 👏
Loved it mate. Well done. #savetheCypresspine
I just wanted to say I liked your video and give me some good ideas for my own build. Also I had a comment off subject of your video I really like that car in the back it reminds me of my grandfather’s recent build did you build that one
Nice one 🖒🖒
Yes!! This kinda shit gets me so hyped! Thank you.
Great video man
@SSSmithing
6 жыл бұрын
Paul's Garage and Forge your welcome man keep the good videos coming
When you disengage the motor, will the hammer come to rest wide open? If not, maybe a piece of elastic cord hooked on so when the motor disengages, it pulls the hammer to full open.
I wanna make one too how has this held up so far
awesome vid and project, maybe just make it so that the hammer is pulled up when standing still so you can easily insert your pieces for forging?
Where to buy the spring? Thanks!
Hows the Rayburn on your legs
Power hammer by day metronome by night
Can I get some of the measurements for the stand I want to build one
I made a power hammer just like this over the summer. The only difference was mine weighed about 1200 pounds when I finished!
Yea yea, I see tha tattoo. Hahaha, but yea if I ever had one it would be like this - colors and plants, no skulls and bones and devils
I wish your mic was as loud as the music
VERY WELL MOLTO BENE
Haha that was awesome, good job can't wait to see you put some hot metal under that and see how she goes.
@lenblacksmith8559
6 жыл бұрын
Yeah looks like it, and all the material was free, how good is that. Gee you'll be able to knock out some good stuff now, heaps of tongs maybe some more hammers etc. Cheers Len.
@lenblacksmith8559
6 жыл бұрын
Good mate, would like to have a go at a hammer but like you don't have any of the tools they use, I know you made that one and used tong handles as fullers, man that was good ol Aussie ingenuity. Would be easy to make one of the drifts I reckon.
What's the HP on the little motor?
@jacobmclin9398
3 жыл бұрын
That's what I'm looking for!
How’s it performing?
@oldskoolonly
4 жыл бұрын
Will Lothridge great. She's no monster powerhammer but does what I need it to do 👌🏻
do you know the Ram weight?
@lucalaferla6601
5 жыл бұрын
no probs
mail me that blueprint.
:D
Can we see a video of this smacking something?
@lucalaferla6601
5 жыл бұрын
Awesome thank you, good to see an Aussie making these videos
For f*cks sake dude check your volume levels. Couldn't here a word because tools and music blasted my ears off. THX for the content though. Exactly what I was looking for. THX again.
Yep mate I just read it anyway.. the stuff you asked in the description.... #Does anybody even read this stuff ?# very nice project by the way. You may not have a bazillion in shiny new equipment, you weld with extremely minimal protective clothing, there's dust and shit lying around, just like in my "workshop", but blimey mate you get the job done, and entertain us along the way. Inspiring stuff! On a weather note, while you were 'enjoying' the middle of summer, we in lovely Sweden have many degrees minus Celcius, my garden's got piles of ploughed up snow lying around, and I'm definitely not up for welding bare armed!
Never weld/torch a tire rim while the tire is still mounted. Big bada boom. kzread.info/dash/bejne/ep2Ax8yiaMWyf84.html
watch my hammer! kzread.info/dash/bejne/oHqspdhrqLrPkdY.html
Are u that fukn ugly u gotta blur ya face out?