Build F-18 Super Hornet with Single EDF
Тәжірибелік нұсқаулар және стиль
Yet another Fighter jet, this time is F/A-18F the 2 seated Super Hornet, the wingspan is about 1 meter plus, with the flying weight about 1700 gram. It's still using the same EDF as my previous jet, which is 70mm 12 blades FMS EDF. I use 6S battery by connecting two 3S 2200mAh Lipo batteries in series. Because F-18 has dual exhaust I have to make a bifurcated duct made form art card, the power is not too different from if without using split duct exhaust. I was planning to copy the CG from the FMS Super Hornet but when I examine it the FMS Super Hornet was not made in scale with the real plane, the shape of the wing is different from the real plane, maybe they use F-18 legacy hornet as a base and just modify the LERX and the air intake. So I have to calculate it manually.
You can download the plans here :
paper-replika.com/index.php/r...
Join this channel to get access to perks:
/ @juliusperdana
Specs :
1. Wingspan 1020m / 40 inch
2. Flying weight : 1700 grams/ 60 oz
3. Wing loading : 45.2 gram/dm2 - 14.8 oz/sq.ft.
4. Wing cube loading : 7.4
5. Wing Area : 37.58 dm2 / 582 sq.in.
6. CG : 5 cm / 2 inch from Wing Break
Electronics for test (pusher prop)
- DXW 3536 1200kv
- Prop 10x6 (2 blades)
- 50A ESC
- Battery Lipo 4S 2200mah
- 4 x 9 gram servos (micro servo)
Electronics for test (EDF)
- FMS 70mm 12 blades 6S EDF
- 80A Predator ESC
- Battery Lipo 3S 2200mah x2 (series connection)
- 4 x 9 gram servos (micro servo)
Transmitter
- Jumper T16 + BetaFPV Express LRS TX module
- 10 ch BetaFPV Express LRS RX
Materials :
1. 5mm Foamboard/ Depron/ Polyfoam
2. 10mm Carbon Tube/ Bamboo/ Wood Dowel 1 meter
3. 0.3mm Mica Plastic
4. hot glue, UHU glue, CA glue, PVA glue
5. Packing tapes
Пікірлер: 199
Great to see that you've upgraded to 3D printing and laser cutting! Your awesome craftmanship deserves it! Keep it up!
@JuliusPerdana
7 ай бұрын
Thanks, will do!
Who need fms model when u can make one by urself? Just found ur video while searching for something that can help me build my very own rc jet on yt and man, ur video is excellent and inspiring, good work dude.
Another straight-forward/'quick' yet amazing design build, Julius. I know your mods will have the bugs OUT of 'The Super Bug' in no time.
Looks FANTASTIC! Amazing what can be learned from flying a scale model.
This turned out so good! Just like the real thing
That’s impressive, for such a complicated model. Very well done!
@JuliusPerdana
7 ай бұрын
Thank you very much!
Another magnificent build Julius! I appreciate that you actually show the struggles we all go through when testing out new aircraft. Btw, I almost came out of my chair watching that first "crash" (I thought for sure that plane was going to hit the ground nose first). But WOW! Did you ever get LUCKY!!! Perhaps you should design you own wind tunnel so you can iron out these sort of things without having to put such BEAUTIFUL aircraft in harm's way. Keep up the great work! I can't wait to try this build myself..
@talissoncarvalho6719
6 ай бұрын
Do you have a link to where I can buy this plastic primer?
Bener2 jenius njenengan bang. Saya sangat2 salut sama ke kreativitas an njenengan
you are an example of real spirit of RC Hobby, congratulations
@JuliusPerdana
6 ай бұрын
Wow, thanks!
Amazing that it survived all those crashes. Solid design and construction 👍 Never seen a landing like that one😎...cheers
@JuliusPerdana
7 ай бұрын
lol thanks
That looks really awesome 😎👍 you are a tough fighter and eventually always you deliver unique results! Keep it up 💯💪
@JuliusPerdana
7 ай бұрын
Thank you, I will
Great job. I like the design.
Mr. Perdana, YOU ARE ABSOLUTELY BRILLIANT!!!!!!!!!!!!!!!!!! THANK YOU FOR SAVING ME MONEY!!!!!!!!!!!!!!!!
Fantastic f18 great work bud
@JuliusPerdana
7 ай бұрын
Thanks 👍
cant wait to build it will start this weekend thanks brother
@JuliusPerdana
7 ай бұрын
Have fun!
At first I thought it was because gyro but good for u that u figured it out great work 👍🏻really appreciate it man
@JuliusPerdana
7 ай бұрын
My pleasure!
Plan nya jadi makin simpel. Mantep om gass bikin
Very good workmanship, excellent
@JuliusPerdana
7 ай бұрын
Thank you very much!
Wow Julius, You're getting better and better all the time.
@JuliusPerdana
7 ай бұрын
thank you
Gracias maestro por todos sus conocimientos compartidos Dios te bendiga y cuide siempre
Day one of requesting for mig-25 pls 🥺
amazing work as always!👍
@JuliusPerdana
7 ай бұрын
Thanks again!
Yessssss absolutely beautiful
keren om Julius, Terbaik
I love your f18 ,looks better than fms one 👍👌, your one amaizing builder and pilot,well done .
@JuliusPerdana
7 ай бұрын
Thank you so much 😀
Buatan om bule scale semua Mantab
Your work is a masterpiece every time, and I have great respect for it. Would you please try YF-23 for your next work?
Continue sempre fazendo essas máquinas de querra meu amigo .
Om Jul memang hebat.
Impressive work!!!!👍👍👍👍
@JuliusPerdana
7 ай бұрын
Thank you so much 😀
Julius parabéns belíssimo trabalho amo esses protótipo de jatos de querra e sempre que vc faz fica muito bom parabéns. E obrigado por sempre disponibilizar todos os vídeos e projetos o PDF .
That is nice bro
Un excelente modelo. Mi pensar es que necesita el "cg" mucho más al frente. Construí un f 18 y me paso lo mismo.
it was very valuable
Muito bacana,f-18 lindo parabéns pelo excelente trabalho
@antonanton7834
7 ай бұрын
asi es
I just found your channel and happy I did. As a suggestion for future projects, I hope you will consider the F-106 Delta Dart. I believe to one of the most beautiful fighters ever built and I believe has never been offered by any model RC company. I would love to build one. Thanks
@JuliusPerdana
7 ай бұрын
Welcome aboard!
Nice video
Great job Julius 👏🏾. You should start 3d printing your canopy with clear PLA and your landing gear struts PETG.
@JuliusPerdana
7 ай бұрын
no, better to print the mold and use vacuum forming or just soften the plastic and use the mold is better, just like what I did in F-22 Raptor, but yeah someday will print the landing gear, thanks btw
@newerarc4784
7 ай бұрын
@JuliusPerdana I agree the vacuum forming is a lot better for the canopy. You're welcome.
I'm curious, Bang Julius, to make a beginner's sky walker so that the mold can be imitated by beginner friends..🙏🏻
Your Top Gun portfolio is nearly complete, only Tomcat is pending.
Wow kalau lepas landasnya 👍👍👍
So good work...but need to good wing profile and edf thrust...
HI Julius It's very interesting and fun to see what you have going on in terms of new aircraft models. You do a good job, but above all you share plans and Stl files so that others can build one of your models. That is fantastically kind of you. Now I have looked at your pdf files for the F18 Super Hornet. I can see that F11 is not included in either the A0 or A4 pdfs. I was thinking of taking a break from my 1/6 scale P47 for a while and building your F18 Super Hornet and would be grateful if you could post the F11 part on your site. Best regards Kjell
@JuliusPerdana
Ай бұрын
oh let me check that, thanks for the heads up
Mantap bosku....nanti lah kalau ada waktu saya mau main ke rumah. Masih di Depok kan boskuh..
😂😂😂sudah ketinggalan.ikut nyimak bosku. Betul2 super mantap
At which angle we need to stick the vertical stabilizers. Please reply
Use carbon fiber rods to connect the entire airframe to the edf engine, the instability is quite noticeable.
@JuliusPerdana
7 ай бұрын
thanks for the tip
Отлично, Браво мастер
Nice one, i too thought maybe your cg was too far aft since it was hanging those first few attempts.
Alat2nya komplit sekali
Absolutely fantastic jet bud. I'm building it at the minute but I just noticed it's a FMS 6s. I only have a FMS 4s. Do you think it will still fly 😢
Nice
Top...Gun !!!
Amigo, Você está de parabéns pelo seu trabalho, eu gosto muito, abraço companheiro, próximo vídeo pode ser o f-14 que tal,ok. 😊
Rất Mong chờ Mig 41 từ kênh của Bạn !Chào thân mến!
Hi. May I know what will be the peinting settings like the scale if I will use the plan and put in a 50mm EDF fan? Thanks
F-18 body is crazy and aerodinamic is sh..t no problem with the model nice job! Congrat!👏
@JuliusPerdana
2 ай бұрын
Thanks a lot!
mantap ini
Man I love the plane, but I can’t build it, can you recommend an easier one?
Can I use edf after 2 -3 projects
Next please build E-2C Hawkeye
need to do a vfa-31 decal set i designed the real paint job also painted the sweet little miss f-14??? maybe
Alatnya makin canggih
Very nice plane..sir ..What is the size of the wing that fits the Edf 64mm motor
@JuliusPerdana
7 ай бұрын
80 cm maybe
Do you have a link to where I can buy this plastic primer?
T7a would be awesome
I whas waching one of your live stream and i saw that You said ,that You like the pt17 and cherokee planes and now i started a 1.5m now
@JuliusPerdana
7 ай бұрын
Awesome! which one that 1.5meter?
@Elisrc.
7 ай бұрын
@@JuliusPerdana i made it using 4 point view plane ,its a litlle hard but there is no other way for me ,maybe on sunday i can Fly it
Thanks for the video and fun ! But where is THE CAT !!!!! ?
@JuliusPerdana
7 ай бұрын
I forgot to include him, next video!
Where i can find 5mm depron? I can't find it :(
Yay! No ugly prop on the back!🥳🤩🥳🤩🥳🤩
@JuliusPerdana
6 ай бұрын
as a weekend flyer I still prefer that ugly prop, just use EDF for show lol
Can you try a f-8 crusader?
Very good nice
@JuliusPerdana
7 ай бұрын
Thanks
Can I use 64mm 2500kv bldc motor to push a 4.5lb plane??
@JuliusPerdana
7 ай бұрын
EDF or motor?
Love from India Please make a f 14 tomcat with top gun decals
Pa Julius numpang nanya 🙏 Hidrayer untuk menekukan styrofoam. Berapa wots yang cocoknya? Terima kasih.
@JuliusPerdana
7 ай бұрын
ga perlu pake hair dryer lapis lakban aja di sisi luar lalu coba lengkungkan di atas pipa/ pralon, ntar kalo udah melengkung baru dilepas lakbannya lagi.
Hello, how are you doing that your hot glue isn't melting your depron? I have that problem -,-
@JuliusPerdana
7 ай бұрын
you need to use different glue stick, it looks like your melting point is too low, or you use bigger glue gun that usually hotter then the smaller one. Or you may use different brand of glue gun
How much flight time would you get with 2 3s 2200mah battery?is it enough fir beginners?
@JuliusPerdana
2 ай бұрын
2-3 minutes, EDF is not for beginners
what is the cost of this
Beli remotnya di toko mna mas
Hello friend, I'm a Brazilian, I watch your videos a lot, I wanted to know if you sell some aircraft online through sales sites?
Good❤❤❤
❤from india Can you add how to calculat rc aircraft
So you think it will fiy using an FMS 4s edf
@JuliusPerdana
3 ай бұрын
twin yes, single no
Build Tupolev-160 please 🙏
dont crash this plane, its a nice plane, keep it with you or sell it, keep the plane with motor, its a good plane, aqui no brasil um avião desses é caro pra caramba
Set your video camera to infinity focus so focus doesn't fade in and out all the time. Auto focus is terrible for RC flying shots.
@JuliusPerdana
7 ай бұрын
thank you
@user-nd4nz2zd9q
7 ай бұрын
@@JuliusPerdanaAbsolutely fantastic!
This is awesome! How is progress on the SR-71?
@JuliusPerdana
7 ай бұрын
Just started cutting the foam, I'll make live video building it, thanks btw
@ClipperProductions-he4xh
7 ай бұрын
@@JuliusPerdana Thats great! And is there a way that i can show you pictures of the planes i made using your plans? i just finished building your su-57 and it flies great
@JuliusPerdana
7 ай бұрын
@@ClipperProductions-he4xh do you have facebook? Tag me there, or email me : juliusperdanapr@gmail.com
attack angel nya dilursin apa di bawahin om....?
@JuliusPerdana
7 ай бұрын
ke bawahin, ga usah dipikirin ikutin aja plan nya, udah dirubah kok
Om ajak saya main dong😂
bang julius ada tutortia bikin templete paper replika? ajarin saya suhu
Для тех,кто хочет повторить эту модель.Советы: F16+F21 и F15+F20 -эти детали делать из цельного куска пенопласта. На чертеже в детали Ц6 нет паза под соединение детали F3. Крыло передалал по своему.Модель будет с толкающим винтом и полетный вес в пределах 600-700 грамм.Пока строю. For those who want to repeat this model.Tips: F16+F21 and F15+F20 -these parts are made from a single piece of foam. In the drawing, there is no groove in part C6 for the connection of part F3. I redid the wing in my own way.The model will be with a pusher propeller and a flight weight in the range of 600-700 grams.While building.
kalau lubang intakenya kotak,itu F-18 growler om jul🙏
@JuliusPerdana
3 ай бұрын
Growler ya Superhornet
GOOD JOB ROY!! AAAA JULIUS THE LEARN TOO FLY?? SHOW HEAM!! LEARN HEAM!! IT'S NICE TO FLY STABLE!! YOU FEAL FREE IN SKY!!! ❤️ ANY WAY HE MAKE GOOD JOB, TOO FIX MODELS, LIKE YOU!!! ❤
سبحان الله وبحمده سبحان الله العظيم
Sir, please make video about how to make EDF from brusless motor, because EDF is high price
@JuliusPerdana
7 ай бұрын
you can't, If I am you I will stick to pusher prop, EDF is expensive, very short flight time 2-3 minutes, heavy, complicate works. Even if you DIY your EDF, you will still need expensive battery, like 4-6S battery. So I prefer pusher prop all the way. Btw you can use this plans for pusher prop. just add/glue plywood 4x10 cm closing both exhaust pipe and mount your motor there, check description for pusher prop specs.
where can i find the plans for laser cutting?
@JuliusPerdana
6 күн бұрын
email me to juliusperdanapr@gmail.com
Please make this planes smaller for 3s or 4s max.. ❤
🤩🤩🤩🤩
Hi. I build small planes too, but I don't have much experience with 3D Fusion, I'm just trying it out. I would be very happy if you are interested in a legendary aircraft like Curtiss C-46. Commando I think you could build it in 2-2,5 metres size. Best wishes.
15:07 you should balance model in normal position not upside down. F-18 is high wing plane.
@JuliusPerdana
7 ай бұрын
thanks man