Get Plans Here: spencleydesignco.com/products/cornhole-boards-plans Want to get some amazing benefits and support Spencley Design Co? Visit our Patreon page and see if it’s right for you: patreon.com/spencleydesignco

@evanstrammel1

2 жыл бұрын

With the way you cut your legs i.e. the 13 inch length does the highest point of your board end up at the regulation 12 inches?

@kennethdurrell8851

2 жыл бұрын

Great video, you made it very easy to build. Looking forward to my next project using your videos, thanks. 😎

@SpencleyDesignCo

2 жыл бұрын

Thanks for the support, Kenneth!

@SpencleyDesignCo

2 жыл бұрын

Yes it’s regulation size

@lonewoodsman00

8 ай бұрын

What clear coat do you use over painted and stained boards? Everyone one I've found so far says not to use on paint

I watched A LOT of cornhole DIY videos before getting to yours, and I can easily say, you are the BEST at giving the most detail, simplifying the work and the tools, and making it look like something my son and his grandfather should be able to accomplish in a day! THANK YOU!

@SpencleyDesignCo

3 жыл бұрын

I really appreciate the feedback, Tiffany! Thank you very much!

@SpencleyDesignCo

2 жыл бұрын

Thanks so much, Christopher! Any projects you’d like to see in the future?

I appreciate how honest your videos are, especially the fact that you call yourself out and talk about mistakes and how you go about fixing them.

@SpencleyDesignCo

4 жыл бұрын

Thanks for checking out the video, Branden! We really appreciate it! Yeah I’ll always show when I screw something up because we all make mistakes! I’m not trying to pretend I’m better than I am 🤣 I’m very very amateur at this stuff

My daughter is getting married and wants this for the reception. We will be creating a wildflower painting and will make two that match! Great instructions and video!

Best cornhole instructional video ever. Thank you for making everything so clear. BTW, I'm an 81 year old mom and have done quite a bit of woodworking in my lifetime. My best one was a firefighters lawn flag holder. .

@SpencleyDesignCo

3 жыл бұрын

Thanks so much for the support, Lenore! I’ve got tons of other videos to keep you busy 😀

Without a doubt, the BEST instruction video for the average DIY-er. This is the video I’ll be using to build our 2nd set of corn hole boards. Thanks!

@SpencleyDesignCo

2 жыл бұрын

Thanks for watching! Any projects you’d like to see in the future?

I airbrush Custom Art Designs on my boards, Great video, simple solid ,quality made boards and Process, Thank You.

I cannot believe you went through all of that effort!! Thank you so much!!

Thanks so much, straight forward with bits of humour throughout. Best video I've watched so far- I will be making one for my wedding 😁

@SpencleyDesignCo

2 жыл бұрын

Thanks, Kate!

This is easily an underrated video on this subject. I appreciate your forethought in design and pointing out your mistakes and how you overcame them. This is great. Thanks

FINALLY!! A completely honest youtube channel about building cornhole boards. I do have a few suggestions though. 1. Put another washer on the leg between the 2x4 and leg itself. It'll make the movement smoother even if the wood swells a little. 2. Instead of your side pieces being so long, make your top & bottom pieces longer. It'll make it look nicer and your end grain won't be sitting on the ground so much.

@SpencleyDesignCo

3 жыл бұрын

Thanks for the suggestions and thanks for checking out the channel!

@WickedWayz81

3 жыл бұрын

@@SpencleyDesignCo, You're Welcome!! Thanks for putting out videos.

@SpencleyDesignCo

3 жыл бұрын

You’ll be busy catching up 🤣

@daraichel

2 жыл бұрын

Nice suggestions

Who doesn't like a good game of cornhole? Great job on the build.

@SpencleyDesignCo

4 жыл бұрын

Exactly! It’s the best summer bbq game!

So thorough…love it

@SpencleyDesignCo

Жыл бұрын

Thanks for watching, Phillip!

THANK YOU SO MUCH! The best video I've seen on this diy!!!! You're awesome!

@SpencleyDesignCo

Жыл бұрын

You’re too kind! Thank you!

Man great video, really nice walk through...i need to make a set now.

@SpencleyDesignCo

4 жыл бұрын

Thanks Justin! We appreciate that!

Omg I love this !!! Thank u for ur time

@SpencleyDesignCo

2 жыл бұрын

Thanks for watching, Anne!

Great step by step video

Bro thanks for sharing seems super simple with your details and approach been wanting to do one of these for awhile now for some family members 🤙 thx again. You have a new follower 🤘

Great video! Like the way you explain each phase. Keep at it!

@SpencleyDesignCo

Жыл бұрын

Thank you!

Amazing, thank you!

@SpencleyDesignCo

2 жыл бұрын

Thank you Erika!

Excellent! Great explanations! Christmas presents here I come!

@SpencleyDesignCo

2 жыл бұрын

I hope you enjoy building them, Mark!

Thank you. Best diy for cornhole boards i have found. Great video! Worth a subscribe and like!

@SpencleyDesignCo

3 жыл бұрын

Thanks a ton, Brian! I appreciate the support!

@BdaPeter

3 жыл бұрын

@@SpencleyDesignCo im going to make a Mr and Mrs cornhole set for my wedding! Hopefully with this video guide they will come out nice!

@SpencleyDesignCo

3 жыл бұрын

Well congratulations! I’d love to see how it turns out 😀

You just inspired me to make my own. And I live in the Bronx ppl from here really don’t play corn hole but I do.

@SpencleyDesignCo

2 жыл бұрын

Nice! I hope it works well for ya

Thank you, great video

@SpencleyDesignCo

3 жыл бұрын

I appreciate you checking it out, Gabe!

I would paint one red and the other blue with all of the sides black. Great tutorial, thanks 👍🏽

@SpencleyDesignCo

Жыл бұрын

Thanks for watching!

Nice job. I want those squares you used to keep the frame square!!!

@SpencleyDesignCo

2 жыл бұрын

I’d actually recommend you don’t, they didn’t last very long

As I look back on the plywood prices, I would buy 3-4 sheets for the prices shown here. My cheapest plywood price currently is $64/ea. 😭😂 Great video, thanks for sharing!

@SpencleyDesignCo

2 жыл бұрын

I’m glad you enjoyed the video, Shiro!

I would definitely use wood putty to fin the screw holes on the top surface.

@SpencleyDesignCo

2 жыл бұрын

You’re welcome to

I’d like to see a router used to round out the edges of the plywood, or top board. Also for the 6” hole. I have a 6” hole saw, but sometimes that thing will catch and try to turn my arm into a pretzel.

@SpencleyDesignCo

3 жыл бұрын

Rounding over the edges is a great idea!

To get more complex you can add cut outs for handles on the sides and add magnets to the legs and bottom of board so they stay in place when moving them

@SpencleyDesignCo

2 жыл бұрын

Great ideas!

great video! a couple thing i did for my set was: 1) I used vinyl sleeves over the carriage bolts to help increase the life of the legs so wood is not rubbing the metal. 2) pocket holes from the bottom to secure the top, this helps keep a uniform playing surface. 3)a bracing piece in the middle to help prevent the bags from bouncing too much.

@SpencleyDesignCo

4 жыл бұрын

Thanks for stopping by Daniel! Those are all great improvements and something we would definitely consider next time we build a set. Thanks!

Yo dude, your plans diagrams are SICK. Bet Ikea would hire you. Seriously so good

@SpencleyDesignCo

2 жыл бұрын

Thanks so much for the support, Nicole! I’ve got TONS of other videos that you might be interested in checking out too 😀

@nicolereneecarpediem

2 жыл бұрын

@@SpencleyDesignCo so, I've got my stain and polyurethane on, but I'm concerned it won't slide so well, without an epoxy coat. Should I add a more slippery top layer?

@SpencleyDesignCo

2 жыл бұрын

It’s totally up to you. You could also just wax the top

@nicolereneecarpediem

2 жыл бұрын

@@SpencleyDesignCo wax..hmm. Usually I just do my eyebrows :D

@SpencleyDesignCo

2 жыл бұрын

🤣🤣🤣

I like the simplicity of the make, but one thing I would’ve have done is to fill in the sunken screws with wood putty and sanded them smooth. Otherwise, great video. Keep up the good work.

@SpencleyDesignCo

2 жыл бұрын

Thanks for checking out the video, Dave!

Wasn’t cornhole originally a game only played in prison ? 😂😂😂😂

I will say, in watching your video again I did catch a small error. In the very beginning you say that the project will need "3" 2x4's but in the text (and ultimately you do end up needing) "Four" 2.x4 boards. Just an fyi. Still the best video out there!!!

@SpencleyDesignCo

3 жыл бұрын

Yup, I corrected it in the text. I can’t edit the video now that it’s posted

I’m a girl with no skills. These directions were awesome!

@SpencleyDesignCo

2 жыл бұрын

You definitely have skills! You’re gonna do great!

Love it! Where is the pdf of build intruction you mention?

@SpencleyDesignCo

3 жыл бұрын

Thanks, Tracy! The plans are linked in the description, but here’s the link in case you missed it: www.spencleydesignco.com/projects/cornhole-boards?rq=Cornhole

@TracyF47

3 жыл бұрын

@@SpencleyDesignCo Thanks! 😊

0:37 The best video! What’s the cost for materials?

Great video🤝 I appreciate your time to make it. I bought the plans, said a unique link to your digital goods will be emailed to me. When will I get the email for the whole lay out? I’ve got everything cut and ready other than the measurements for the hole on the legs and center of the board

@ghosty2163

Жыл бұрын

Hey did you ever get it? What were the measurements for the legs and the side of the board?

Wow look at the prices. I wish they were still like that.

@SpencleyDesignCo

3 жыл бұрын

Haha yeah, definitely would have to increase the price if I was making more of these!

Good plans but 3/4 with 2×4's? How heavy are those fkrs?

I have made a few of these corn hole games. The only problem I usually have is the legs. The measurement down to the bolt goes in on the leg itself and the side of the board. In the video I do not believe you mentioned that measurement. Great looking products though.

@SpencleyDesignCo

3 жыл бұрын

Thanks for checking out the video, Jim! I appreciate your support! I did not specifically mention that detail in the video, however I have full details with all the relevant dimensions on the plans on my website. If there’s a specific one you need help with, let me know 😀

@miken7750

3 жыл бұрын

@@SpencleyDesignCo weak answer

@ryanwaltos2206

Жыл бұрын

@@miken7750 the answer gets you to buy the plans...

@SpencleyDesignCo

Жыл бұрын

That’s mike for ya

Hi. Just purchased your pdf. Thanks. What is the best way to finish coat the boards for outdoor use. Prefer clear coat.

@SpencleyDesignCo

2 жыл бұрын

Thanks for the support! Spar urethane or poly urethane would be fine. Paint would be the strongest though

Easily deserve 300k+ subscribers. Been DIY’ing a year and this was NOT LONG, TO THE POINT and EXPLAINED. Thanks man using this for our camping trip in 48hrs lol

@SpencleyDesignCo

2 жыл бұрын

Thanks for watching, pick!

How far back do you drill the holes for the carriage bolts?

@SpencleyDesignCo

Жыл бұрын

Every measurement you need is laid out in the plans

I've been trying to find someone to do a Tech N9ne cornhole set.

Man, I miss those lumber prices.

@SpencleyDesignCo

2 жыл бұрын

My lumber prices haven’t changed the past two years. Still the same where I am 😀

What did you measure on the frame to drill the hole where the carriage bolt goes through?!?!?!?

@SpencleyDesignCo

2 жыл бұрын

All of the required dimensions are in the PDF plans

@slasherFTK

2 жыл бұрын

@@SpencleyDesignCo I’m not paying $10 for a online piece of paper just say what the measurements are that’s the only thing you didn’t do in the tutorial

@SpencleyDesignCo

2 жыл бұрын

Thanks for contacting Spencley Design Co! Our hours are 8am-5pm EST Monday-Friday. If you’re in need of assistance, please forward all concerns to customerservice@spencleydesignco.com

how did you measure out the holes for the legs

@SpencleyDesignCo

3 жыл бұрын

Hi, Mike! I used a simple rule to measure out the holes to drill for the legs

@charlesemmons6319

2 жыл бұрын

How far did you measure in inches from the top of the board to make your 3/8 hole on the frame board for the legs?

@SpencleyDesignCo

2 жыл бұрын

All of the needed dimensions are in the plans

Why didn’t you leave information on how to set the legs. They’re in the plans, that you have the purchase?

@SpencleyDesignCo

2 жыл бұрын

all of the detailed dimensions are in the plans

How do you make the beanbags?

@SpencleyDesignCo

Жыл бұрын

I used canvas, beans, and a sewing machine

What do you do when 2x4s are sprung? The boards are teetering on opposite corners

@SpencleyDesignCo

2 жыл бұрын

You either need to mill them flat, or buy new boards

@truthh8322

2 жыл бұрын

@@SpencleyDesignCo I'll try planing them.flat

ok sooooo he glosses over some important parts like what measurements are the holes for the legs at?! and the holes for the leg holes as well...

@SpencleyDesignCo

Жыл бұрын

All of the detailed measurements are in the plans if you need them

For 2:39 Making how far in

@SpencleyDesignCo

2 жыл бұрын

all relevant dimensions are in the plans

Are these boards regulation?

@SpencleyDesignCo

3 жыл бұрын

They’re the stand 2x4 size. I can’t say I looked up specific regulations for a governing cornhole entity. The only rule we play with is that you have to have a cold beverage 🥤

Bro didn’t even say the dimensions of where the holes for the legs go just put them there and drilled

@SpencleyDesignCo

2 жыл бұрын

Are you sure?

Ohio state buckeyes

@SpencleyDesignCo

2 жыл бұрын

What?

It seems like 3 @ 96” 2x4’s is not enough for the job. 48x4 takes 2 of them. 4@21” is 84” and 4@13” is 52” which puts it 40” short. Unless you have a special way to stretch that wood. Folks will get the pieces that you said and then wonder why they are short on wood. Just my thoughts brother.

@SpencleyDesignCo

2 жыл бұрын

The plans include a cutlist for your reference

Vikings

I refuse to play a game named cornhole.

Terrible

@AaronGeller

5 ай бұрын

Hush 🤫

@msm624

5 ай бұрын

@@AaronGeller ok

@AaronGeller

5 ай бұрын

@@msm624 very good 👍

4:00 - "just mark line and you've got perfect 30 degree angle" () 4:21 - "...pieces meet up perfectly" - you keep misusing this word :D 5:39 - having all the skecth draws beforehand you still able to fail with sizes? let's pause for the honest moment - quite inaccurate job done here, nothing to be proud of

@AaronGeller

5 ай бұрын

Hush 🤫

How far up do u measure the hole on the legs