Hey guys! Thanks for watching the video! Just to rephrase the part where I stated the plane flies for ~10 minutes, I actually referred to the ideal flight time of this plane, calculating from what current the motor draws from the battery's capacity. The plane in perfectly still weather conditions and a little more practice flying makes for better control and longer flights. Thanks for understanding, cheers! Consider dropping a like 👍🏻, a share, comment, and subscription to the KZread channel if you like what you see! ✌🏻 Stay tuned for a potential upcoming video of longer flights from this flying wing.

@7MinutesCreative

Жыл бұрын

keep up this great work and passion my friend

@MaxImagination

Жыл бұрын

@@7MinutesCreative Thank you, buddy!! 🙂

@7MinutesCreative

Жыл бұрын

@@MaxImagination i make new video at my new cake channel . Please comment I'm so appreciative ❤❤

@jogomez1988a

Жыл бұрын

mistake?... Its fly... Is ok....

@MaxImagination

Жыл бұрын

@@jogomez1988a Hi, Jorge. Apart from not having flown one of these before and the slightly windy conditions, the plane flies good 🙂✌🏻

Great stuff - love the low tech / hack building - shows first principle understanding & healthy frugality - very talented. I LOVE it.

@MaxImagination

Жыл бұрын

Thanks so much for your kind comment! :)

I can't even belive that you made that 😲 very nice bro . You have a good talent

Would love to see an indoor version 10% of this size, with weight savings achieved by using a supercapacitor, micromotor etc

@MaxImagination

Жыл бұрын

Will consider making a sized-down plane as such in the coming future 🙂✌🏻

@BuckeyeStormsProductions

Жыл бұрын

I will second this!

After waiting for a long time, you have satisfied me a lot max! And with new transitions , improved lighting in the studio and waiting for a studio tour! Keep going max never stop your efforts! 😊 🙌🙌🙌🙌🙌💯💯☺️🤝

@MaxImagination

Жыл бұрын

First of all, thank you so much! I'm very enlightened by your kind comments! Might do something as such somewhere in the future. 🙌🙌🤝

You my friend will never succumb to boredom. Well done.

@MaxImagination

Жыл бұрын

Not a single day in my life passes with boredom 😃 Thanks a lot! 👍

I absolutely stunned by this guy's hard work... A good content always took time to build and he delivered it with so funny and simple way..really luved his content and enjoyed it too.. Congrats brother...many more miles to go...😎😇

@MaxImagination

Жыл бұрын

Much appreciated! Thanks a lot for your consistent, kind support!!! 😃👋

Its fly very well with this diy radio, Really its result is amazing

@MaxImagination

Жыл бұрын

Thank you, Jonu! Cheers!

Wow amazing beautiful idea 👌✌️ thanks my friend 👍👍👍

@MaxImagination

Жыл бұрын

Thank you! Cheers! 😀

Hi Max 🙋‍♂️ nice plane. Congratulations

@MaxImagination

Жыл бұрын

Hey, thanks! 😀

Genius. I really enjoyed the project itself, and the video production. In particular, I loved the way you took on the challenges and your simple solutions for small and big things.

@MaxImagination

Жыл бұрын

Glad you enjoyed it... Many thanks for your kind comment! 😀👍

I love your videos. I just love the detail it goes into unlike most videos. Really teaches me a lot! Thank you!

@MaxImagination

10 ай бұрын

You are so welcome! Thank you for your appreciation!

You're doing amazing work Max 😎 Keep it up👍👏👏👏

@MaxImagination

Жыл бұрын

Thanks a lot, Sahil! Will gladly do 🙂✌🏻

Very nice build! You should consider adding a fpv camera next time

@MaxImagination

Жыл бұрын

Will consider adding one! Thanks a lot 🤝

Great video Max

@MaxImagination

Жыл бұрын

Thanks for tuning in!

love a channel that reply to comments!! keep up the good work! ❤

@MaxImagination

7 ай бұрын

Thanks for your kind comment!

Amazing project, Max. 😊👍

@MaxImagination

Жыл бұрын

Many thanks, James!

@GrandadsOtherChannel

Жыл бұрын

@@MaxImagination 👍🛩

Amazing bro ! Always been looking for projects like these on KZread but none worked. Keep up the pace!

@MaxImagination

Жыл бұрын

Thanks, will do! 😀

You have a lot of patience to take on this project from the angle you did. I'm sure you know there are a lot of ways to do this so much more efficiently and for probably the same money. Very unique approach!

@MaxImagination

Жыл бұрын

Thank you very much!

Great project 😁🤜🏼🤛🏼

@MaxImagination

Жыл бұрын

Thank you! Cheers!

Great Idea Bro ! Keep It Up.

@MaxImagination

Жыл бұрын

Thanks for supporting! 🙂👍🏻

Really sick plane

@MaxImagination

Жыл бұрын

Thanks, Anusha!

Awesome video! You can tell you’ve put a lot of work into both the plane and editing of the video. On a note about the plane, flying wings typically have their elevons always slightly up, especially for takeoff as this moves the CG forward slightly. Additionally, and I could have this wrong, but I believe flying wings have a different pitch axis then standard planes, so to counteract the different rotation they need to already be engages both during take off and cruise. Additionally flying wings are difficult to fly because you have to have both elevons and alerons on them to help with adverse yaw, but you only have them as one set making it a little touchier especially with a far bag CG

@charliekitts8248

Жыл бұрын

Forgot to mention - look into differential ailerons. It’s pretty much the only solution for adverse yaw on a flying wing unless you want to start getting really technical. It also allows you to keep just the ailerons rather then adding elevons

@MaxImagination

Жыл бұрын

Thank you for your comment, Charlie! I'll keep your suggestions in mind for when I build an improved similar flying wing 👍 Yup flying these flying wings is not a straight forward thing... I'll try playing around with the CG a little more to get it more balanced in the air. Cheers!

Nice design and construction. Thanks for sharing this video and your thoughts.

@MaxImagination

Жыл бұрын

Thank you for the kind comment, Steve!

Amzing video bruh keep it up!

@MaxImagination

Жыл бұрын

Thanks! Will do!

The first motor you used has around 50g of thrust which was not enough to fly. My advice: use IMU to stabilize the system

@MaxImagination

11 ай бұрын

Thanks for your advice.

just amazing, thats gona be my first plane model. You will see, 2023 its my year.

@MaxImagination

Жыл бұрын

Exciting to hear! Happy making 😀

Hello , very nice plane Max ❤❤

@MaxImagination

Жыл бұрын

Thanks, a lot, Dung! 🙂🤜🏻🤛🏻

I love to build rc planes too. Your channel is very good! Subscribed!

@MaxImagination

Жыл бұрын

Awesome, thank you!

Superb presentation

@MaxImagination

Жыл бұрын

Thanks! 😀

Awesome Job 🛩️🙌🏼

@MaxImagination

Жыл бұрын

Cheers, man! 😁✌🏻

@joshuaaranguren1020

Жыл бұрын

@@MaxImagination no problem 😊

Damn man good video bro 😎

@MaxImagination

Жыл бұрын

Thanks! 😊

Fantastic !!!

@MaxImagination

10 ай бұрын

Many thanks!!

Single string performance was coool 😂🔥🔥❤️

@MaxImagination

Жыл бұрын

Haha! Cheers ✌🏻

Beautiful

@MaxImagination

Жыл бұрын

Thank you! Cheers!

im still in the process of planning a different style of this plane but I have all the parts I need to build the wing part but no electronics so far, instead of doing a solid foam wing im doing a line of wing shape sillhouettes that get smaller towards the edge of the wing and im going to lay a sheet of foamboard over that frame to create the wing which both saves weight and mess

@MaxImagination

Жыл бұрын

Sounds like a plan! Best of luck with your flying wing plane! :)

Superb bro...🔥🔥🔥

@MaxImagination

Жыл бұрын

Thank you, Sid! 👍🏻

Nice work.

@MaxImagination

3 ай бұрын

Thanks!

Very cool! I love it! I'm inspired to build one for myself.

@MaxImagination

Жыл бұрын

Glad to hear you enjoyed the video. Thanks for your comment. Happy making!

U r Pro ...👏

Bro you really deserve for views

You could add some s-curve to the roll control to make it less sensitive. Or even better to both of the controls.

@MaxImagination

Жыл бұрын

Thanks for the tip!

I'm just kid but I love doing this things I wish i have more tools like you 😉

@MaxImagination

Жыл бұрын

You can do anything you set your mind to! My advise to you is to do the most you can with what you already have 🙂

pretty good job

@MaxImagination

Жыл бұрын

Thanks! 😀

YAAAAY!!!

Hi max! I already created your controller from the video on the description, is the receiver in the separate video same as this?

@MaxImagination

8 ай бұрын

It is practically the same, yes.

Pretty Nice end Results!

@MaxImagination

Жыл бұрын

Thank you! 😃

Hello sorry to bother you again, but may I know Where you got those prints of the airfoil stencils? Or may I know how thick the airfoil shape is?

@MaxImagination

Жыл бұрын

Hello there. Those blueprints of the stencils were drawn by me. The airfoil shape stencils from wing-end to wing middle are 11 & 22mm thick.

hey max i am looking into making this for myself and I was wondering if I needed to make the transmitterthat you made or can I use an off the shelf 2.4 GHz one. If so how do I paired it/set it up and do you have any recommendations on with to buy. thanks

@MaxImagination

3 ай бұрын

Hi there. If you're going for a streamlined radio controller and receiver. I suggest you look on amazon for the Radiomaster TX12 ELRS transmitter and an ELRS nano receiver.

@TTV-jesuiscool

3 ай бұрын

@@MaxImagination thank you very much

at 11:56, pushrod ends SHOULD have a Z-bend; not u-bend.!!!!

Hello I was just wondering if an 6000KV brushless motor would be less powered or good enough?

@MaxImagination

Жыл бұрын

6000KV will be a little slower (not by much) and more powerful, yes.

Usa el aislante de color rosa. Esta una imagen de la pantera rosa. Ese tiene una mejor resistencia.

Hey how did you mix the aleron and elevator is it in the code ?

@MaxImagination

5 ай бұрын

I did not and reverted to using diagonal movements for the mixing.

Would love to see it balanced! Good job.

@MaxImagination

Жыл бұрын

Thank you :)

You might want to consider adding dihedral to your wing to increase it's inherent stability. Your plane also looks very sensitive to pitch. So in your code you might add something to change the gain on the elevon so that you can fine tune the movement faster or slower. You may also want the elevons to be trimmed up or down. The plane should be able to glide without controller input. The engine mounted above the centerline may also be contributing the pitch instability. Nice project.

@MaxImagination

Жыл бұрын

Thanks for your tips about my wing, Bill! I'll consider making these changes if I choose to make an improved flying wing. Thanks!

as discussed, here, the wingtip stabs should be about 1/3 as tall. because, the stabs increase the amount of mass located at the wingtips. and, there are adverse affects from such outboard-located mass. in order to limit the adverse affects, the stab size should be minimized. googletranslate

@MaxImagination

Жыл бұрын

Hello there, David. Will consider experimenting with trimmed wing tip fins to seek better flight results. Thanks for the tip!

Nice make more content 👌 Your videos help and are entertaining

@MaxImagination

Жыл бұрын

Thanks for your encouragement! 🙂✌🏻

@Demonstrat

Жыл бұрын

Btw love your DIYs and things you make

@MaxImagination

Жыл бұрын

@@Demonstrat I appreciate it! Thank you! 😊

Creo que te faltó estabilizadores verticales.

You should have used a much smaller esc. The calibration is saved even after the batttery is unplugged.

@MaxImagination

Жыл бұрын

Hi there. You have a valid point about sizing. Though, I used what I could get my hands on at the time. 4 packs of small ESCs were all there was online, so I instead chose this 1 larger ESC.

Looks like arduous job, I was wondering if you possible make a wider wings? Alerion should be flapped down when going on the air, once it go airborne, lift alerion up to fly around. I cannot image all of your hard work to make it fly. I am impressed of your hard work! Good job Sir!

@MaxImagination

Жыл бұрын

I've been told my aircraft is also too tail heavy, not sure if having the flaps down will work as this made my plane nose dive from launch. But I'll try again! Thanks for your kind comment! :)

@oneistar6661

Жыл бұрын

Nope. That's not how elevons work!

@kermitinmountain6371

Жыл бұрын

@@oneistar6661 elevons?

Awesome! ! I wonder if it is possible to add a VTX to it or build a VTX based on Arduino

@MaxImagination

Жыл бұрын

Could work! Cheers, Max

can someone break down how the motor is picked in this setup? The amazon page seems to be missing wattage. I want to verify why the esc, battery, and motor work together.

@MaxImagination

Жыл бұрын

Hi there. For that tiny brushless motor, any ESC from small to large will be powerful enough to drive it. The ones I've linked below will work, guaranteed.

@4kstreamer44

Жыл бұрын

@@MaxImagination that's crazy I always thought you had to get a motor rated for certain wattage then get a battery and esc that are of less wattage

@MaxImagination

Жыл бұрын

@@4kstreamer44 In general, always base your power needs from your motor. If it's a powerful BLDC motor, then you can't just use an ESC rated for a lower amperage. So actually yes, it first goes by selecting your motor, the available ESC, then battery.

@4kstreamer44

Жыл бұрын

@@MaxImagination thank you. We built this project in one of my classes

could you ad an mpu-6050 3 axis gyro in the script???

@MaxImagination

Жыл бұрын

It is possible, yes.

@joetookmyvideo

Жыл бұрын

@@MaxImagination that would be epic, and an input to initiate it from a radio aux channel, or dissable it. AETR aux1-4, like the quad guys use, we do alot of scratch building here and im looking for solutions that can get thge kids(and myself) into learning more intricacies.

There are better options out there for foam and motor. The idead of aj Arduino controllwr is cool, but aerodynamics arent there

@MaxImagination

6 ай бұрын

Will consider your feedback for future wing builds as such. Thanks.

Can u provide a circuit for the transmitter and receiver please.

@MaxImagination

2 ай бұрын

Find it here: kzread.info/dash/bejne/ZmuZpLSwdrTWXco.html

Now it's time for a Arduino base Quadcopter

@MaxImagination

2 ай бұрын

I have just recently made one. Watch it on my channel.

If you think of revisiting this aircraft or the flying wing concept in general, you should incorporate some automatic stabilisation - even the best pilots the USAF has to offer can't fly these things unassisted, the only recorded crash of the B2 Spirit was due to a sensor failure, and as far as I'm aware it's the only full scale flying wing currently in operation. Honestly, the fact you managed to keep this thing in the air for as long as 10 seconds was surprising and impressive, seems like you're a damn good pilot. Watching your videos, among other creators, has inspired me to start scraping together some components and hopefully build an FPV drone, or at the very least a car, so thank you for showing how simple this stuff can be.

@MaxImagination

Ай бұрын

I'll consider adding stabilization if I choose to make another plane or other form of aircraft. Thanks for your suggestion and compliments! Cheers.

👍.I have seen you using tp 4056 to charge 3.7v li po battery. I have 500mah 3.7v li po battery and tp 4056 what value of resister you recommend to tp4056 for charge my battery?

@MaxImagination

28 күн бұрын

Search on google images for the "TP4056 current limiting resistor chart" to help you select the correct resistor for all future batteries

@user-qv6gm2rv9q

28 күн бұрын

@@MaxImagination thanks.

Could you make a mppt charge controller?

@MaxImagination

Жыл бұрын

Will write that one down 👍

@aabidhshifaz2090

Жыл бұрын

Ok

bro, for how much minutes it files on sky?

@MaxImagination

3 ай бұрын

It's battery life is around 5-10 minutes.

Bro plz reply 🙏would we have to purchase this arduino circuit board in online purchase?

@MaxImagination

Жыл бұрын

Hi there. You may purchase it through one of the links below in the video description. Cheers!

Amazing video - thanks Max! Just curious - how much would you say this drone cost to make? In terms of materials, electronic components, etc?

@MaxImagination

9 ай бұрын

Thank you! Considering that acquiring the foam would be almost free, the guts of the plane itself would cost you around $35-50 USD depending on where you shop.

@rootsquared383

9 ай бұрын

@@MaxImagination awesome, thanks max! Definitely cheaper than I would have expected

Good project.I have made arduino transmitter and f22 raptor model aircraft is this arduino code match that aircraft?

@MaxImagination

2 ай бұрын

Thank you! The code should work for that model aircraft, it works for most.

@user-qv6gm2rv9q

2 ай бұрын

@@MaxImagination thanks 👍

Can we use arduino nano 168

@MaxImagination

Жыл бұрын

Yes. That Arduino compatible board will work.

I think the main problem is those joysticks on the transmitter, if you use proper ones you'll see it's way more controllable.

@MaxImagination

Жыл бұрын

Thanks for the tip. Yes, I would probably counter the sensitivity by gaining more control with proper joysticks rather than the current knobs. Cheers.

Your video is great 👍 I made a 500 gram rc plane is it enough to fly it using 1000kw motor and 7.4v battery unit

@MaxImagination

3 ай бұрын

Thank you! If all is well balanced with minimal drag, I don't see why not. You need to test it.

@user-es3gm1rj5k

3 ай бұрын

@@MaxImagination thanks. i will test.

@debxylen

3 ай бұрын

Did it work?​@@user-es3gm1rj5k

do u have video explaining the code?

@MaxImagination

7 ай бұрын

No. I wouldn't do that.

How many km range is the transmitter

@MaxImagination

5 ай бұрын

Maximum 1KM.

Please make a drone with this reaciver and transmitter

@MaxImagination

Жыл бұрын

Will do, one day!

❤️

I'm new to rc plane hobby. I want to make a plane i hope to use 7.4v 2s battery and 30A esc. What motor you recommend for me 1000kw bldc or 2200kw bldc?

@MaxImagination

3 ай бұрын

Choosing something of higher "kv" is more optimal to get your plane off the ground. I'd choose a 2200kv.

@user-es3gm1rj5k

3 ай бұрын

@@MaxImagination thanks max

Very cool but where do you buy your arduino parts

@MaxImagination

Жыл бұрын

Hi, Astr0. I buy most of my Arduino/electronics parts on Amazon.com. You may check the links below. Cheers ✌

@astr0yt344

Жыл бұрын

Thx I’ll think about buying it

Why never glue an electrical component directly to the styrofoam?

@MaxImagination

Ай бұрын

You don't glue components directly to polystyrene as this will rip foam chunks out when removing or replacing components.

💚💚

add a 2400kv motor with a 6x 4.5 bullnose prop 100mph

@MaxImagination

Жыл бұрын

Thanks for the tip 👍

May be you should add some kind of flight stabilization feedback using accelerometers or something!..Great job though😎🤓

@MaxImagination

Жыл бұрын

Thanks for the tip, I'll keep that in mind for my future model airplanes. Thank you!

Your videos are amazing bro 😍 Can you help me to do a project ?

@MaxImagination

Жыл бұрын

Hi! Thank you! At a certain cost, sure, how can I help you?

@-JubinSJ

Жыл бұрын

@@MaxImagination can you suggest best project for ece bro ?

Whats the range of this plane bro😊

@MaxImagination

Жыл бұрын

100+ meters

@amitkumar6784

Жыл бұрын

@@MaxImagination great job bro and what is the total cost of the project

I think it whould fly much better if it had landing gears and took of from the ground 😅

@MaxImagination

Жыл бұрын

Hi, Ayaadh. That would be ideal for a regular-style RC trainer plane with an additional tail to go with a fuselage. However, landing gear is not found on flying wing model aircraft due to the added weight, it should be kept to a bare minimum with these types of planes. What it probably would take is a bit of adjusting and more practice flying it here my end... 😅 Cheers.

önü ağırlık istiyor

@MaxImagination

Жыл бұрын

👍

Make a f22 raptor using arduino

@MaxImagination

Жыл бұрын

Gotta love the F22 raptor. I've got the idea already written down, cheers for the idea!

4s

Its tail heavy.....

@MaxImagination

Жыл бұрын

Will tune it! Thanks...

Bro you are going to be making like 200 dollars an hour within 10 years

@MaxImagination

Жыл бұрын

Woah, you've got a time machine? 😉

@derekturner2517

Жыл бұрын

@@MaxImagination no but I give it maybe 5 years til you do

Hi 🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩

@MaxImagination

Жыл бұрын

Hi there! Thanks for watching.

Great job man 👌

@MaxImagination

Жыл бұрын

Thank you 🙌