What I see is that if you want a pretty decent AR10, get the Sabre.

@HuntFishShootChannel

11 күн бұрын

That would be a correct observation

@waynecastleman1363

11 күн бұрын

Yep the Sabor !

@hawaiiangunner

7 күн бұрын

Buy the absolute cheapest AR-10 rifle you can. Replace the barrel and Bolt. You will end up with an unbelievably accurate rifle for a great price

@01Sassoon

6 күн бұрын

@@hawaiiangunner Yup, correct... If you're going to spend your cash. Barrel, Bolt, and Trigger.

Thanks For The Honesty..... An Endangered Trait In Modernity....

@HuntFishShootChannel

11 күн бұрын

I really wanted to see both of them shoot better, even shot them after this video hoping they were flukes but returned the same results. Fringe 1 MOA at best with 6 different common match ammos

@BadActor-

11 күн бұрын

@@HuntFishShootChannel Both Nice Weapons.... Must Be The Knights Secret Sauce ... Ha ha

@HuntFishShootChannel

11 күн бұрын

@BadActor- maybe! This UIC is very nice but I haven’t found the right bullets which must be ultra special because I tried all the popular match ammos with 1-1.5 MOA results. Not what I want

@revolutionanarchy713

11 күн бұрын

@@BadActor- Seekins SP10 has entered the chatroom...

@HuntFishShootChannel

11 күн бұрын

Need an SP10

I love your content, and I have a ton of respect for your shooting ability. That said, I want to share something as I had a very similar experience the first time I shot my LMT MWS 20" 6.5 CM. During my first range outing, using high-quality otm Factory ammo, every 5 round group was between 1.5 - 3 MOA at 100 yards. I was beyond disappointed, as I had just spent over $3,000 for the rifle, and another $2500 for the optic setup After doing some research, as difficult as it was to admit, the cause of the poor grouping was me. Initially I thought it had to be the rifle, because I routinely shoot sub .3's with my Accuracy International bolt action rifle. However, I have learned that heavy bolt action Precision rifles are a much more forgiving forgiving platform to shoot accurately The AR-10 platform will exploit any flaw you have in your shooting fundamentals. I find when I shoot with a soft shoulder, focus on trigger press and follow through, bring my thumb to the strong side, and keep the trigger pinned back until the recoil cycle is over, my groups improve significantly. I'm also consciously neutral on the bipod, I do not load it (especially with Atlas or that Magpul) . These have all helped me stay sub MOA with the exact same ammo when I focus on all of the above. Any lack of focus will produce a bad shot. When I do everything right, I now consistently shoot .5 MOA - .9 MOA with 130 gr Berger hybrids I love to hate trying to shoot tiny groups with the AR-10

@HuntFishShootChannel

10 күн бұрын

Thanks for the information, I appreciate the candor. I have shot it since then with no luck. But we shall see what happens! Thanks for watching and the input!

@Matt-dd3cw

10 күн бұрын

​@@HuntFishShootChannelI would try one other thing, try using a benchrest style front rest or at least a big heavy front bag along with a rear bag. Eliminate the bipod as a variable

I don't feel so bad with my $600 gen2 pa10 now. I can by a lot m80 ball with that extra two grand.

@HuntFishShootChannel

11 күн бұрын

Yes you can!

Got an ADM UIC 13.9 last year. Came with a loose barrel nut that was barely noticeable. Great gun once I took care of it. But whoa buddy, they got some folks to have a talk with in the offices.

@HuntFishShootChannel

7 күн бұрын

Good to know! Thanks for sharing!

Now that’s a no b.s. review if I’ve ever seen one, nicely done

@HuntFishShootChannel

10 күн бұрын

Thank you!

@HuntFishShootChannel

10 күн бұрын

#MakeGunReviewsHonestAgain2024

Might be interesting reaching out to criterion actually, they’re crazy about tolerance stacking, your bcg, bolt head, head spacing everything. They might be able to point you in a better direction to tighten up that ADM.

I would take PSA as the winner. Almost same moa but alot difference in price.

@HuntFishShootChannel

10 күн бұрын

Very true!

Great video brother ! Keep getting it !

@HuntFishShootChannel

8 күн бұрын

Thanks!

Great job 👍

@HuntFishShootChannel

11 күн бұрын

Thank you! 🙏

10:31 The bipod rail isn't connected. I'm sure it doesn't hurt anything but you may want to be aware it flex'd and pulled away from the handguard for just a moment

@HuntFishShootChannel

Күн бұрын

Thank you for the heads up!

Great video. I appreciate your honesty on these rifles, Mike have you heard or know anything about the VK1 Ar15 that seems like a excellent rifle

@HuntFishShootChannel

11 күн бұрын

I need to try one of those!

@David-j3n

11 күн бұрын

The site for that rifle is VKTR industries. I'm kind of torn between that one and the Mitchell def I want a great one and done home def and range mpr rifle

Man, I wanted at least one of those to shoot really well! That's the most important criteria for sure!

@HuntFishShootChannel

11 күн бұрын

Agreed. They shoot ok but not great

@jacobdeem8187

11 күн бұрын

Did we hear round count on each gun? I don't feel like I did. This certainly makes a difference

@HuntFishShootChannel

10 күн бұрын

@jacobdeem8187 over 50 on the ADM and 20 on the Sabre before filming. It’s 2024 and a quality well made barrel especially one that is lapped, doesn’t need a break in. But if a gun shoots 1-1.5 MOA, it’s not all of a sudden going to shoot .5 with break in. Do some gun barrels need a break in? Sure but not high end barrels.

@jacobdeem8187

10 күн бұрын

@@HuntFishShootChannel some do some don't need a break in period. I'm not big on break in periods but I've seen plenty of barrels that speed up and tighten up with varying round counts.

@HuntFishShootChannel

10 күн бұрын

@jacobdeem8187 agreed, it can be case by case basis no doubt

Wish you would have had an SR25 or LWRCI REPR on hand to set a standard to compare these to

@HuntFishShootChannel

11 күн бұрын

Ain’t that the truth!

Is that a Garmin Instinct 2? I have one and love it, great watch!

@HuntFishShootChannel

10 күн бұрын

That’s the one! Still ticking, it’s about 5 years old now!

Love your channel man a little suggestion if I may, a better rear bag setup will help a lot, rifle sinks a lot in the rear on recoil in video and will cause your high fliers, bipods on a bench with ar10’s is a no go, better off prone and load heavy on those pods or shoot a sand bag front rest if on bench, keep that trigger pinned after the shot breaks it helps tremendously with follow through and finger stays in sane position for all the rounds fired in the group. Both those rifles will shoot 1 moa or better with federal gold medal match and the proper technique

@HuntFishShootChannel

9 күн бұрын

Appreciate the input and you following the channel. But both these rifles will not shoot 1 MOA or better with GMM and proper technique as they won’t do it on a lead sled either. Out of general curiosity, why not off the bench? The bipods are loaded and is easily visible along with pinning the trigger to the rear while shooting the comparison groups, you can even hear trigger reset. I’m all for tips and suggestions but for every tip we receive off the internet there is a contradiction to it three lines down. The bag has worked without flaw in every other video regardless of caliber or rifle but I’m always into better gear. Thanks for the input and watching

@greasemonkeyviking384

9 күн бұрын

@@HuntFishShootChannel Just suggestions to try, I’ve had my ass kicked by Ar10’s in the past until I adopted different methods. Frank Gali with snipers hide channel has probably the best vids on KZread on shooting gas guns accurately. A lead sled will only cause more issues with Ar10’s trust me been there before. Good luck man

@HuntFishShootChannel

9 күн бұрын

@greasemonkeyviking384 thanks for our the info! Snipers hide is fantastic 🙌

I've heard after around 100 rounds these precision barrels tighten up their groups. I've certainty experienced this with hunting rifles. I'd be interested to see a follow up. To be honest I've never actually seen a gas rifle shoot sub moa so 1.5 to 2 might be as good as it gets. Thanks for the honest review!

@HuntFishShootChannel

10 күн бұрын

A follow up will happen if they get more accurate! Some gas guns struggle for 1 MOA but these shouldn’t be. Thanks for watching!

@waltermullaney5041

9 күн бұрын

Absolutely take care brother!

I always tell people the same thing here. It depends on your skill sets. If you have no gunsmithing skill, pay the money for top end product. If you routinely break down your rifles blindfolded, custom design parts and accessories, and hand load your own ammo to the third decimal point on powder and bullet grain, well, then you can go cheaper and fix/alter what needs. It's like buying a car. You don't buy a beater if you barely know where to check the oil. That being said, I love my PA-10 Gen3 after I fixed the timing issue causing the firing pin to hit primer so hard it sometimes blew holes through the primer. Consistently shoots .5-.75 MOA at 100m.

@HuntFishShootChannel

9 күн бұрын

Thanks for sharing

A good alternative to these AR10s is the seekins SP10. I've gotten better groups from ball ammo than what's shown in this video. Floats around 1" with fed gmm 175gr sometimes under some over.

@HuntFishShootChannel

6 күн бұрын

I need an SP10 in my life!

damn, i put a 20inch Criterion chrome lined barrel in my PA10 gen2 with the JP headspaced bolt. Rounds touch with m80 ball if im doing my part.

@HuntFishShootChannel

11 күн бұрын

That is awesome! Maybe I get there one day with an ammo I choose but not right now

@downonit22

11 күн бұрын

@@HuntFishShootChannel I'm definitely not suggesting I'm a capable shooter. The system is certainly more accurate than I am lol. I did run different ammo through it too, Hornady 178gr BTHP was also very accurate. I'm pretty tempted to try AAC offerings

@LONEWOLF_LCD

11 күн бұрын

I have a good amount of experience with Criterion 556 barrels and I have to say I was really surprised by this….. I built a LMT MARS H 6.5 CM and was kicking around getting a Criterion barrel made for it….. I’ll stick with my LMT barrel for now, try some Berger 175 gr and see what that does in both, if not send the gun to Criterion and ask Mike Ross to play around Willy’s it and do his magic

@HuntFishShootChannel

10 күн бұрын

@LONEWOLF_LCD I have a few different ammos I’ll have to try and get because many of the usually 308 match ones haven’t worked

I shoot an 18 inch and I get those groups with 150 grain. I'm yet to try match ammo 168 /175 grain.

@HuntFishShootChannel

11 күн бұрын

The 168 A-MAX Hornady is accurate in every gun I shoot them in except for these unfortunately. Usually if I shoot a gun with that ammo and it doesn’t shoot well, it’s the gun not ammo.

@SonotCali

11 күн бұрын

@@HuntFishShootChannel I'm going to try some match ammo and see what I can do with my aero

3 round groups is barely an accuracy test…

@HuntFishShootChannel

11 күн бұрын

Ok we stated the why and also did the three rounds as show for how most manufacturers demonstrate sub MOA. If they won’t shoot sub MOA 3 shot groups they won’t do it in 5, 6 7 or 9 or 10.

The psa might need to get “broken in”, & the criterion should’ve been good to go though. Maybe the weight or the round wasn’t best for the twist rate? Or maybe it just doesn’t like that particular load. I’ve had Tula 55gr group better than several different boxes of winchester from white box to some hunting loads that were like $2/round when I bought them.

@HuntFishShootChannel

11 күн бұрын

Why does it need broken in? It’s a 416R 5r rifled Faxon barrel, meant to be a match barrel and even then I have shot over 50 rounds through it with no change. But we tried 165, 168, 175grain 175 grain. All weights that would be ideal for the barrel. All match grade. Unfortunately no Luck

Is that an a1 or a2 for the psa?

@HuntFishShootChannel

11 күн бұрын

These are 308 and this is their Super SASS. It’s a DPMS cut receiver

It’s a law of diminishing returns.

@HuntFishShootChannel

10 күн бұрын

Yes

Griffin armament ambi lower is cheaper and almost identical to the adm!

@HuntFishShootChannel

11 күн бұрын

Heard that!

@bobbytucker6494

11 күн бұрын

So true

@user-gh1qf9xs7m

11 күн бұрын

It’s true, just wish they could get them in stock at some point. Had zero luck getting one

@Ultrarmx

11 күн бұрын

ADM stole Griffin ambi controls.

@hopewilliams6705

11 күн бұрын

@@Ultrarmx I know... That's why I buy the Griffin armament products and not the overpriced ADM

Our economy is really fucked if $1500 is considered budget. That said, even if you dont like the Sabre, accuracy, setup, etc. It's still a solid starting platform to build on. Just swap barrels and maybe other parts, and you can fine tune this into a solid tack driver.

@HuntFishShootChannel

10 күн бұрын

Agreed. It is a shame in the grand scheme of things

IMO… I’d still get the PSA but I’d swap that barrel out for a Mos Tek

@HuntFishShootChannel

10 күн бұрын

Roger that

Bummer Dude! Hopefully the ADM will improve as it gets broken in.

@HuntFishShootChannel

10 күн бұрын

One will hope!

12mins in and my takeaway thus far is that both rifles need their gas adjusted, a muzzle brake, and possibly some fiddling with buffer weights/springs 15 minutes in and I can say confidently that my Bear Creek Arsenal build is more accurate than both of these. Those groups are pathetic. The BCA is heavier, likely less reliable, and a lot cheaper; but hey I’ll take that win

@HuntFishShootChannel

11 күн бұрын

The gas on the PSA could be a touch lower but I tried it and didn’t get lock back on every magazine. The gas on the ADM is fine and weighted perfectly. Outside of not shooting sub MOA the adm is very soft shooting and shoots great like an AR15.

Big thing is its not a PSA barrel, but a Faxon match barrel

@HuntFishShootChannel

6 күн бұрын

Truth!

Am I the only one that noticed the bipod rail on the PSA was loose while shooting? I feel like that might have contributed to the accuracy issues. I've been shooting a lot of .308 lately and my POF Revolution is just about at 1.25 MOA with the right ammo. I'm also doing 10 round groups though. 3 rounds just doesn't seem like enough to get a solid representation of the barrel's actual accuracy. I know that if I only fired 3 rounds with my POF, I could easily say it's sub-MOA. Last time I took it out, the first 6 rounds were touching and less than a half an inch. Regardless, the accuracy of that ADM is just unacceptable. I would show this video to them and see what's going on with the rifle cause a $3k rifle should shoot better than that.

@HuntFishShootChannel

11 күн бұрын

Not loose at all. The Magpul bipod has significantly more flex and play than the atlas. Three rounds was used as it’s the standard for manufacturers to use for accuracy testing. Bolt guns have no issue reaching sub Moa if they are good rifles with 3 rounds but for some reason less than accurate ARs need 5 or more? The reality is if the gun can’t shoot sub Moa with 3 shots, it won’t do it in 5. In regards to the ADM, I’m dissatisfied to say the least. I have shot it more since we filmed with the same results. There could be an ammo out there but I haven’t found it yet in any of the normal good shooting 308 stuff. Black hills will be next

@jonathanmisetich1520

11 күн бұрын

@@HuntFishShootChannel I wasn't referring to the bipod, but the rail it's mounted on itself. I can literally see it separate from the handguard several times through the video while shooting. As for the grouping, I don't think you understood what I said. I'm not saying the rifle would group tighter with a larger amount of bullets per grouping, if anything, it'd be even worse, but that'd be an accurate representation of what the rifle is actually doing. Everyone is moving to 10 round groups now because of what I explained. With my POF, if I do a 3 round group, I can practically stack the bullets on top of each other and claim I have a half-MOA gun, but if I fire just a few more rounds, suddenly my group opens up a bit. It's just to say that 3 round groups are basically luck, as opposed to what the rifle is actually reliably capable of. As for bolt guns, I can think of a number of reasons a barrel manufacturer would only fire three rounds through their bolt gun barrel, but the most prominent being what I just explained. If they only fire 3 rounds and get a quarter-MOA grouping, they can sell the barrel as "Quarter-MOA". It's why you hear these claims of "sub-MOA" guns all day long but as soon as the bullets meet paper, those claims go out the window. Haven't you heard of the 1-MOA-All-Day challenge going around? Forgotten weapons did a great video explaining it and showing it.

@HuntFishShootChannel

11 күн бұрын

@jonathanmisetich1520 you can do ten rounds sure but you are then looking at heat deflection on the overwhelming majority of guns. I understood completely what you said, I have also seen the information from forgotten weapons about this. I don’t care if a manufacturer guarantees sub MOA or not, I want the gun the to shoot it. If a rifle doesn’t shoot it, I generally do not like it. The reason competition rifles have ultra heavy barrels is a the number of rounds in a course of fire can be increased without shot stringing due to the barrel heating up like a lighter contour. It’s important to know every rifles tipping point for heat but most is around 7 rounds, especially gas guns. How much will they deviate? Thats case by case basis. The level of deviation is more or less depending on how good the barrel is or not, high end barrels will deviate yet still remain effective for use under heavy firing schedules while low tier will not. As far as the 1 MOA all day challenge I am familiar depending on which variation we are talking about, it’s been around for a long time. I have 3 particular rifles in my safe I can guarantee I pull out, shoot sub MOA, use a load I know shoots well in them and more importantly I know exactly where my cold bore shot will land. I get rid of rifles which do not shoot sub MOA every time I take them out.

Those are some crappy groups, dang. I am not expert marksman but my 6.5 Criterion does wayyyy better. That is depressing for either one

@HuntFishShootChannel

11 күн бұрын

I agree, unfortunately I either don’t have the right ammo, or they just won’t shoot much better. I went out a day after filming this to test both again just to be sure I wasn’t having a bad day and got identical results. There is likely some ammo out there that shoots very well, I haven’t found it

@MontanaWild78

11 күн бұрын

@@HuntFishShootChannel It was a good video. I wish you could test with some factory Berger ammo. If they don’t shoot with that then they probably won’t do any better. Black Hills makes some really good ammo too, so many options in 308.

@HuntFishShootChannel

11 күн бұрын

@MontanaWild78 yeah black hills is next to try. Very surprised the GMM and Hornady didn’t shoot well.

@MontanaWild78

11 күн бұрын

@@HuntFishShootChannel I am surprised that the Criterion barrel didn’t do better than it did. I would love to see update videos with different ammo if you find something they like 👍

@HuntFishShootChannel

11 күн бұрын

@MontanaWild78 there will be update videos if it happens, follow our instagram @huntfishshootchannel also!

Whats absolutely wild is they outsource the barrel on the super sass vs the m110 at home and the accuracy suffers. Ive been pulling .75" with 168s federal gold medal match out of the m110 at home off a bipod. Some others have gotten below .5 in a lead sled. Super disappointing if the super SASS was a step backwards.

@HuntFishShootChannel

11 күн бұрын

I am surprised as well, I have tried that ammo with some luck but nothing near .75

@micahdunleavy9227

11 күн бұрын

@@HuntFishShootChannelHe’s lying.. lol He isnt getting .75 with a psa ar10.. if he did it was one group and blind luck..

@sharkleroad62

11 күн бұрын

@micahdunleavy9227 lmao okay 🤣 literally join MTS and check out the data on more than just my sample size. Guns open up around 800yd but inside they're sub MOA with match ammo if you are...

@HuntFishShootChannel

11 күн бұрын

He’s not lying I have shot PSA rifles that shoot that well, even a jakl. But this one hasn’t been it for me

That bipod would go

@HuntFishShootChannel

7 күн бұрын

Go where? To the moon?

Now for an actual precision ar10, get ya a Seekins SP10...

I think it may be the shooter

@HuntFishShootChannel

2 күн бұрын

You should buy both rifles, buy all the ammo and do the same test, but don’t complain if you get similar results

Where the heck you finding an ADM UIC-10 for $2700, lol???

@HuntFishShootChannel

11 күн бұрын

Why do you think I own it? 😂 it was 2600 before tax. I saw it, saw the price and thought heck I’ll try it 😂

@revolutionanarchy713

11 күн бұрын

@@HuntFishShootChannel well lucky you then. I’ve never seen it that low anywhere. Even with my mil discount in various places.

Buys forged model instead of billet on the sass and then proceeds to complain about it not being billet or the ambi bolt release that the billet has lol

Seekins

@HuntFishShootChannel

11 күн бұрын

Shooting these two guns for this review and afterwards left me wanting an SP-10. It’s setting in a cart right now

@stingers96

11 күн бұрын

@@HuntFishShootChannel GAP-10

@stingers96

11 күн бұрын

also try 168gr Federal GM SMK or the counterstrike

@C_oprator89

11 күн бұрын

@@HuntFishShootChannel you the dang man!!

@HuntFishShootChannel

11 күн бұрын

Thanks!

People will die on that PSA hill wont they! You can put together a rifle that can shoot better than this for the price of the sabre!

@HuntFishShootChannel

10 күн бұрын

You could

It feels like this is a very low-detail video. You shot 4 groups from each gun and decided “aww man, these suck.” There’s so much more to each of these rifles than a basic accuracy check. I also haven’t watched all of your videos, so I don’t know that you are a sub-MOA shooting human. Not saying you aren’t, but there’s plenty of people who THINK they are, and aren’t. ADM makes guns using premium parts that can be taken to war. It did pretty well accuracy-wise, and after some gas-adjusting would probably be a really reliable battle rifle. PSA has long used their customers (including myself, I also buy PSA) to do their QC for them. This rifle is a step in them trying to use nicer components, so it would be nice to see if they actually run. It had some decent groups too. I get that ammo is expensive, and you don’t want to have to spend more money to produce this video than it would generate. It still comes across that you put minimal effort into developing an opinion on either gun, before throwing that opinion out to the world.

@HuntFishShootChannel

10 күн бұрын

Plenty of effort was placed into this and I have a catalog of videos demonstrating my ability to be a sub .50 MOA shooter if not better. Three hours went into just filming this 15 min long video. Each gun was shot more than enough to show if they had the ability to shoot better. The harsh reality is neither gun shot great with any of the match ammos we used, they shot ok at best. There is likely an ammo out there they will shoot well, but I haven’t found it. There is more than just accuracy, in that case, the ADM is a better rifle. Those points were well established. I didn’t say they sucked either, I just said I wasn’t happy with their accuracy performance. Good rifles, not happy with accuracy out of rifles built for accuracy.

@capntexas

10 күн бұрын

I get it man. We can’t all be Sage Dynamics throwing 2000 rounds per rifle. Most of my guns haven’t received that in their lifetime that I’ve owned them. I’d prefer more data than four 3-shot groups per gun before I call something a comparison, even if it’s exclusively an accuracy comparison. Glad to know it’s the arrow not the Indian, and that was never an accusation but a caveat that I don’t know your shooting ability.

@HuntFishShootChannel

10 күн бұрын

@capntexas fair enough and it’s easy to do that many rounds when all your ammo is provide and the content is funded. We are self funded so for now we make do with what we can! Thanks for watching!

I think a 3 round group is an embarrassingly poor test to recommend a purchase on, you also don't in anyway discuss longevity, reliability, warranty, or use case

@HuntFishShootChannel

11 күн бұрын

We specifically state why a three shot group was used. In addition 3 shot groups is the standard which 98% of rifles on the market are held to for accuracy guarantees. This is an initial review, not a long term use review. Use case? That’s up to the individual to make that choice. Finally, if this test was poor, do you have an example of yourself making a similar video for us to see how it’s done? If so drop us a link 🙏

1,600 dollars for the PSA Sabre is a bit pricey when you can buy an Armalite AR10 for 1,200 dollars.

@ezlife9656

11 күн бұрын

Nope sabre has way better features

@LosDoyerss

10 күн бұрын

@@ezlife9656 Like what? Armalite is a proven weapon.

@LosDoyerss

7 күн бұрын

@@ezlife9656 What features??

first

@HuntFishShootChannel

11 күн бұрын

If you aren’t first you are last

@hopewilliams6705

11 күн бұрын

​@@HuntFishShootChannel WTF there is second and third.... I was probably high when I said that LoL

Out of an ar10 platform that psa is garbage. I live in Charleston and I can’t stand PSA. Terrible customer service warranty service and products. To take a classic iconic rifle and ruin it by making a junk great value version makes me sick. That adm to shoot that many loads and have those results whooped that psa ass. Shows why adm, knights, bcm and Daniel defense get contracts

@HuntFishShootChannel

9 күн бұрын

Good to know

That Kung fu grip is disgusting lol, so much i’ll put it up for sale on ebay for $20 if anyone is interested.. was not a fan

@HuntFishShootChannel

10 күн бұрын

I enjoy it! The beauty is there are 4 billion other options out there

@bryangarcia2429

10 күн бұрын

@@HuntFishShootChannel indeed! Ergo grip 4 life

Just got the super sass a week ago and now I’m mad I spent 1700 on something that isn’t sub moa

PSA=junk

@HuntFishShootChannel

10 күн бұрын

😭

Well if you watch focus trips recent video on the jakl then it seems one should stay the hell away from psa’s more premium guns… They build budget guns with poor quality control, so the Sabre is just crap quality control just shinier and prettier still a lot of guns all over the internet failing miserably..

@HuntFishShootChannel

11 күн бұрын

My gun is very well done and looks great, just only appears to be capable of 1 MOA accuracy. I haven’t seen any of the standard QC issues

At the end of the day it looks more like the shooter rather than the guns. Some dogs just don't hunt.

@HuntFishShootChannel

10 күн бұрын

I have catalog of me repeatedly squeezing accuracy out of guns on this channel and I don’t need to prove my ability to shoot guns accurately. So with that being said, it’s the guns not the shooter.

This dude can’t shoot

@HuntFishShootChannel

4 күн бұрын

Ok 👍

I think maybe revisit with light grain bullet 150, 125 ,135

@HuntFishShootChannel

10 күн бұрын

If it shoots better with those lightweight bullets I’ll be surprised