BROKEN Old SCOUT Knife Restoration | AWESOME Recovery
Restoration of Broken Old SCOUT knife. It is in very worn condition with a broken handle, guard is bent and blunt blade. This scout knife is designed to be used by kids as a first knife. In this video I will make a new handle, grind and polish the blade and at the end assemble it.
About The Old Scout Knife
This small scout knife is specially designed for children as a first-time knife. With finger stops on both sides of the shaft, small hands will not slip over to the blade when nailing. The length of the knife blade is 3.3 in (8.5 cm). The total length of the knife is 7.1 in (18 cm). The tip of the blade is purposely oval for safety reasons. I believe this could be an old Mora scout knife but it is hard to tell since the markings on the blade are missing. There are several producers of scout knives here in Scandinavia like Mora, Øyo, Helle, Brusletto … They are fairly common here in Norway and it was not hard to find one to restore.
The Restoration Process
I started by dismantling the scout knife. I removed the broken handle and all parts from the blade. To remove scratches, rust , pitting and dirt from the blade I used a hand crank grinder, sand paper and I polished the scout blade afterwards.
In this video I made a new handle for this scout knife from walnut wood because it would be quite difficult to repair an old broken handle. I cut the piece in desired length and with a chisel, plane, carving knife I made a rough shape. Fines shaping I did with rasp and sandpaper.
I drilled the handle for the scout blade and with heat I managed to fit the blade in the new handle. Guard and bolster I cleaned on a steel wire wheel and did a hot brass transfer. It got a nice gold-ish look.
Last but not least, I assembled the scout knife. To secure the blade I haven’t used a rusty iron washer, instead I used a new brass washer. It looks much better in my opinion.
Please subscribe if you want to see more of my upcoming restoration projects! And DON’T FORGET TO CHECK OUT Restoring EXTREMELY Old Blade and Making a Knife Video: • Restoring Old Blade an...
Timestamps:
00:00 Before restoration
00:41 Restoration in progress
09:10 After restoration
Thank you for watching, see you in the next one!
Stay safe and ATB
Join this channel to get access to perks:
/ @ffd_restorations
Пікірлер: 120
Your restoration techniques and attention to detail are excellent. You do not just restore things, and you restore them by the methods and ways they were created. Great respect to you!
@FFD_Restorations
2 жыл бұрын
Thank you sir!
Awesome Workmanship 😊 You just need to display final product finished with your Logo on it like the plastic display! Would be Fantastic.!!
Once again, work.... EXCELLENT!! But its a knife restoration not a spy movie that needs suspenseful music.
Very well done Boris! Looks amazing with the new handle
@FFD_Restorations
3 жыл бұрын
Thanks Grant my man! Glad you like it!
Now I can sleep in peace 😂 Really loved the design and the safety concerns put in designing the knife. And I LOVE the firework and the smoke. Brilliant edit. Great job as always, Boris!
@FFD_Restorations
3 жыл бұрын
Nice! Thanks for watching and kind words Anisa 😃👍
Beautiful looking knife ! Well done !
@FFD_Restorations
3 жыл бұрын
Many thanks Kris!
Well done Boris! Excellent work on the handle. Take care 😃👍🏼
@FFD_Restorations
3 жыл бұрын
Thank you very much David, I appreciate that!
Very nice. love the workshop!! 👍
@FFD_Restorations
3 жыл бұрын
Thank you Jim! Cheers!
Klasse Arbeit. Und ich kann es nur immer wieder sagen, eine wunderschöne Werkstatt. 😁👍🏻
@FFD_Restorations
3 жыл бұрын
Vielen Dank, es ist toll, es oft zu hören 😃👍
Great job. Handle is just right👍
@FFD_Restorations
3 жыл бұрын
Thanks 👍
nice work. greetings from Buenos Aires
@FFD_Restorations
6 ай бұрын
Hey 👋😀, thanks a lot!
Nice! That was some amazing work.
@FFD_Restorations
2 жыл бұрын
👍
Great job..love your videos..😍😍😍👏👏
@FFD_Restorations
3 жыл бұрын
Thank you! 🤗
Great jobs on everything you all do, Love the handed it very Beautiful . Nice video enjoy watching
@FFD_Restorations
3 жыл бұрын
Thank you so much 🤗
Beautiful knife
@FFD_Restorations
3 жыл бұрын
Nice, thank you so much! I appreciate the support and watching 🙏😃👍
Привет Борис👋 Как всегда я был рад посмотреть твой новый видос😋 ты лучший мастер по реставрации ножей 👍💥
@FFD_Restorations
3 жыл бұрын
Привет 👋😀 Спасибо, мой друг . Ценю просмотр и поддержку!
Excellent. I enjoy your videos so much.
@FFD_Restorations
3 жыл бұрын
I'm so glad! Thanks for the feedback!
Very satisfying to see this old tool brought back to its glory. The knife itself reminds me a lot of the knife I carry daily, a Ka-Bar 1256 Short Model. Very similar dimensions and design features, just in a more modern package.
@FFD_Restorations
Жыл бұрын
Glad you enjoyed it, thanks for watching 👍
Excellent job 👍
@FFD_Restorations
3 жыл бұрын
Thank you! Cheers!
Thumbs up to you nice restoration as usual like the way you made and shaped the handle to fit the knife 👌
@FFD_Restorations
2 жыл бұрын
Many thanks again, very kind of you!
Hello beautiful knife I like the new handle good job well done
@FFD_Restorations
3 жыл бұрын
Hi Vince, many thanks! I appreciate watching!
Great job, especially the reconstruction of the handle. I like your carpenter's bench, small but complete. Also for this video thumbs up :-)
@FFD_Restorations
2 жыл бұрын
☺️👍
Encore une belle réussite ,bravo .
@FFD_Restorations
3 жыл бұрын
Merci mon ami 😃👍
Nice job!
@FFD_Restorations
3 жыл бұрын
Thank you! Cheers!
Nice one good result
@FFD_Restorations
3 жыл бұрын
Thank you! Cheers!
Awesome job!!!Greetings from Germany👋✌
@FFD_Restorations
3 жыл бұрын
Hello there! Thank you!
nice job, well done
@FFD_Restorations
3 жыл бұрын
Thanks for the visit 😃👍
Sir, It's been always pleasure to watch your restoration video ...❤️❤️❤️❤️🍫🍫
@FFD_Restorations
3 жыл бұрын
Thank you so much Krishna 🙏
Nice lights show ...Sir . Love it 🤗
@FFD_Restorations
3 жыл бұрын
Thanks 👍
@KRISHNA-vh4nl
3 жыл бұрын
@@FFD_Restorations ❤️
Gracias Mr. Boris, excelente y hermoso trabajo como siempre y con el adicional de la explicación del origen de la pieza. Dar a conocer sobre la cultura y costumbre de su país aumenta significativamente el valor del trabajo bien hecho. Nuevamente gracias.
@FFD_Restorations
3 жыл бұрын
Usted es bienvenido Sr. Nessel. Eso es excelente para escuchar. Muchas gracias 😃👍
I think you are probably one of the best if not the best restoration channels on KZread. I love your work and the attention to detail is second to none. I will say though and I’ve said it before the videos when you have no music are so much better. The music is so distracting and sounds like an old 80s porn video. It’s an instant click off when I hear the loud and annoying music.
@FFD_Restorations
3 жыл бұрын
I appreciate your feedback Greig, thank you. I understand your frustration and your point of view. Here is why I started adding music again in my videos. After making over 100 videos on KZread platform and doing an extensive statistics comparison from KZread analytics between videos with music and without, videos with music performing way way better. I am talking about huge differences, in perspective videos without music get a few hundred views and with music a few thousands for the same time period... I wish one day KZread gives control to the viewer to turn off music and watch natural sound and for those who like music can turn on.
I stumbled on your channel after obtaining an old Sheffield style scout knife like the one my Dad had back in the 50s (missing any stamps which might tell me more). You've taught me some invaluable tricks for getting the dull, pitted blade which was worn into a very wavy shape through decades of sharpening back into working, paper cutting order. Though I didn't go all the way to polishing it up to a mirror finish and I did cheat a little and use a dremel instead of just elbow grease to reshape the blade I now have a knife I can use every day instead of a blunt conversation piece.
@FFD_Restorations
2 жыл бұрын
😃👍
Quedo espectacular! Me podrias explicar porque calentaste el fierro donde se coloca el mango luego?
@FFD_Restorations
8 ай бұрын
Thanks, to get better fitment for the handle.
Ich weiss nicht wer dir die Daumen nach unten gibt ,für mich machst du einen Super Job!!!!!!!!!!!!!!!!!!!!!
@FFD_Restorations
3 жыл бұрын
Das ist ein Rätsel 😆 Danke fürs zuschauen 🙏
Perfect.
@FFD_Restorations
3 жыл бұрын
😀👍
Süper 🤩👏👏
Good job, I find it easier to drill the holes before shaping, if you mess up the hole your not out a lot of work. Just a thought.
@FFD_Restorations
3 жыл бұрын
Great point! Thanks Robert!
@Silentsea117
2 жыл бұрын
Yeah I usually do the same when I first started I did what you did and was successful only 20 percent all in all great video keep it up
This channel stands in opposition to the idea that you need expensive power tools to work with metal and turn out an excellent finished product. Awesome video!
@FFD_Restorations
3 жыл бұрын
Well said! Thanks!
@leoi3031
3 жыл бұрын
Loved the hand buffing tool!
@FFD_Restorations
3 жыл бұрын
@@leoi3031
Awesome job is always my friend looks brand-new all it needs is a sheath LOL
@FFD_Restorations
3 жыл бұрын
Thanks Tristan!
@tristanbarnett6271
3 жыл бұрын
@@FFD_Restorations no problem hope to see a foot pedal Dremel like you were talking about LOL
@FFD_Restorations
3 жыл бұрын
@@tristanbarnett6271 yes, soon
Nice restauration once again, that wood cooking stick it's the recycling intentions that I was talking about ... Nevertheless I would keep that broken handle though... In one hand it was not so broken enothough, it could still do it's job; In the other, I instal a brand new wood handle that has that broken, rustic look just to reproduce some primitive Viking blacksmith who doesn't have sandpaper at that time...jeje... Nice keep on...🥇🏆⚔️🗜⚒️🗡
@FFD_Restorations
3 жыл бұрын
Thanks for the tips! I keep all pieces from restorations, for sure at some point I will reuse it in some shape or form 😆👍 Thanks for watching!
Excellent restoration as usual...my like, greetings!!!👍
@FFD_Restorations
3 жыл бұрын
Many thanks Gustavo! Best regards!
Похож на нашу десантную финку времен ВОВ...
@FFD_Restorations
Жыл бұрын
👍
👍👍👍
дружище, ты отлично знаешь свое дело. Проблема возникает, когда ты обрабатываешь клинок. у скандинавского ножа должны быть прямые спуски, ты их делаешь линзой.
@FFD_Restorations
3 жыл бұрын
Спасибо за отзыв!
Looks like a swedish mora knife
Отличная работа,у меня так пока не получается
@FFD_Restorations
3 жыл бұрын
Спасибо за просмотр!
Nice work, you have one new subscriber. By the way... What is your mini black hand planner? Model? Thanks in avance, regards from Spain.
@FFD_Restorations
3 жыл бұрын
Thank you and welcome! It is generic, does not have any markings on it. It is fairly modern...
Нормально,похож на нр 40.
@FFD_Restorations
3 жыл бұрын
Спасибо за просмотр!
Парню будет все равно, если отключат электричество)
@FFD_Restorations
3 жыл бұрын
😆👍
И когда правят на ремне, обычно оборачивают вокруг обуха...
@FFD_Restorations
Жыл бұрын
👍
Could it be that this is a Clam/oyster knife more than a Scout knife?
@FFD_Restorations
3 жыл бұрын
Hey! This is a tipycal Scandinavian scout knife 😉
@rugby224477
3 жыл бұрын
@@FFD_Restorations Oh ok... Wll it turned out great, good job!! 💪🏻
Где находите ножи для реставрации?
@FFD_Restorations
3 жыл бұрын
Местный сайт для рекламы
@oberon9458
3 жыл бұрын
@@FFD_Restorations не хотите сделать полностью новый нож самостоятельно?
@FFD_Restorations
3 жыл бұрын
@@oberon9458 Может быть, в будущем, но не скоро
💪💪💪🇺🇾🇺🇾🇺🇾🇺🇾👍👍👍
@FFD_Restorations
3 жыл бұрын
We're the sheet, thats a half Restauration, With no sheet.
@FFD_Restorations
3 жыл бұрын
The video was not about the sheath, it was about the scout knife as title says and the videos description 🙂
Avail yourself of some power tools, ma man. It’s 2021, it’s ok to do so. Lol
@FFD_Restorations
3 жыл бұрын
Thanks!
@lokiwartooth1138
Жыл бұрын
It’s clearly not needed. He’s an artisan. These skills are gone due to “modern” tools. People who cultivate skills should be applauded not scorned.
@DisgruntledGrunt
Жыл бұрын
@@lokiwartooth1138 Yeah, I’m not scorning anyone, I’m not mocking anyone. Simply stating the work smarter not harder maxim does have truth to it. I have no doubt he has the skills to do the job. You have a good day though, buddy.
@lokiwartooth1138
Жыл бұрын
@@DisgruntledGrunt right on. But as we both know if your name is any indication this new gen don’t want to work at all. They care not if it’s easy or hard. So as a hands on craftsman myself I do appreciate the skill.
Please don’t show the finished knife at the benign
@FFD_Restorations
3 жыл бұрын
Thanks for the feedback!
@PATTERDALE78
3 жыл бұрын
No thank you for the vids