Take it from someone that has had JBL, Altec and ElectroVoice reconing training at the factories, this was exceptionally well done. I'd love to know where they got an edgewound voice-coil made! That's the secret to JBL, Altec and E-V as well. That edgewound voice-coil is why all three are at least 3dB more effficent than almost any other type of speaker (with the possible excptions of Cetec, Gauss and Stephens-Trusonic and certain Peavey speakers which had edgewound coils as well.). I'm afraid those days are gone forever now with the bulk of speakers cheaply mass-produced in China. These folks did a really fine job, right down to the original style vented dust cap.

@hardwareink6116

Жыл бұрын

What about someone like AudioFrog today? I don't know anything about speakers/sound, but I recently have put some money into a car system that I hope will end up sounding really good once I can finish it up by getting a DSP and Tweeters. This definitely looks like a lost art to the USA. Even the AudioFrog speakers that I purchased are made in China. China's issue isn't that they make everything low quality nor that they don't know quality. China's issue is that you have to be on-top of their quality, or they will cut corners any way they possibly can. On top of that, the companies that use China will try to cut all of the corners possible also. I ran a small business and used China manufacturing. It is possible to have a quality product made in China. The issue will be finding a lot of people who are willing to pay the price you will need to charge for the quality.

@R124FL

Жыл бұрын

Langlaikap kwontoul balapan coueseerpong susu mon touch

@cyrillepinton3398

Жыл бұрын

Everyone use edgewound ribbon voice coil by now, and 95% of them are made in Asia, including Precision Ecowind USA. It was a secret of JBL in the 70's.

@EduardBroekman

Жыл бұрын

18Sound has plenty of edge wound woofers... so those days haven't gone just yet.

@wilfredocortez8327

Жыл бұрын

I think no need to send it to factories. it can be done who has know how to repair speaker. in my country repair of speakers was being done in the street of RAON QUIAPO Manila Philippines.

Always love to see true craftsmen at work. All the handwork is efficient, precise and so well executed. A beautiful job and a wonderful vintage speaker good for another 50+ years. Well done gentlemen!

Kerja hebat menghasilkan karya yang luar biasa dan mantab👍👍

wah mantap semanga lam kenal bang nih nyimak full..👍🙏

Amazing to watch. The speaker looked beyond salvage at the start and these craftspeople made it perfect! So much skill and so much done by hand! Brilliant work!!!

That is the most amazing, skilful, successful restoration I have seen on KZread! I'm blown away!

@butcharmstrong9645

2 жыл бұрын

I completely agree! AMAZING!

@Electronichub_05

2 жыл бұрын

True haha, he did a very good job with that one

@dimtodim

2 жыл бұрын

I was serviser in hi fi and what i can say this is so fake i cant belive what he do... Just waisting time....

@abelscaliber7969

2 жыл бұрын

@@dimtodim how is it fake? Lol

@dimtodim

2 жыл бұрын

@@abelscaliber7969 that way how he rebuild speaker is impossible.

very nice job nice HP thank you for the video

Keren dan kreatif,lanjutkan om salam sukses

Only people that work on audio speakers can truly appreciate the level of detail and craftsmanship exhibited. What a beautiful job. The techniques and skill are next level Wayne Gretzky pinnacle of performance.

Great job. I love when people fix old things…very cool!

Ini termasuk konten inspiratif kreatif bagus lanjutkan konten edukasi

Tutorial yang sangat bagus👍👍, terima kasih ilmunya🙏🙏🙏

Mantap sekali terus berkarya bang.....

@user-_13_

Жыл бұрын

Только ногти подстриги в следующий раз

Amazing this restoration and well deserving for the almost 2 million views (as of April 2022). The speaker at the start of the video looked as though it had been left out in the rain/wind/elements. Congratulations on your work!

Beautiful my friend so well done🎉

Работа - Hi End, Молодец !!!👍👍👍

Great work by a truly gifted craftsman. Wish you had added some more explanations about : - the products used on each step, glues etc. - the work done to refresh the internal and external surfaces where the coil moves into. Obviously the width of this gap must be as little modified as possible, but the surfaces must be made perfectly smooth again, so it’s certainly one of the most delicate steps. Other than that, a wonderful restoration of a speaker that most people would have thought to be destroyed beyond any hope of repair !! 👍👍👍

Luar biasa sekali abang-abang ini, kreatif sangat, kerjanya halus, hasilnya mantap, saya suka sekali ❤️ Terus berkarya dan sukses 👍 Salam pemula 🙏

@SatriaSpeaker

2 жыл бұрын

Terimakasih banyak dukunganya sukses selalu

Wau bagus banget bos,

Very nice job and thanks for sharing.

I accidentally subscribed. Now I am glad I did. It's been decades since I held a vintage speaker, and to see how beautifully this one was brought back, has brought back happy memories. Keep up the good work.

Super skillful man..very high knowledge of electronic equipment

@SatriaSpeaker

2 жыл бұрын

Thank you for the support @Rezza Beykay good luck.

Wow... !!! My best friend, It's always great. We liked and enjoyed to the end. Thanks

Beutifull,Lux good job.....and good luck.

Ora bosen-bosen q nonton chanele sampeyan cak,sangat bermanfaat 🙏 salam saking Pati Jateng 🙏🙏

Hebat gan, berdasarkan pengalaman yg ngga semua orang bisa dapatkan, yg sulit adalah, buat coil baru, lem yg sudah baku, ngga sembarangan orang bisa, keren gan, dan luar biasa...

@salmanahmad7247

2 жыл бұрын

¹p

An Garnida Chanel Waseeeek.... kreeeen....👍👍👍

Wah bagus suara jernih

Wow! I never thought this was possible on this level,, I have come across so many good old speakers.. have repaired some but most just went away....

Saya sangat suka vidio restorasi spiker seperti ini 😁

@SatriaSpeaker

2 жыл бұрын

Terimakasih

@donidown2153

2 жыл бұрын

@@SatriaSpeaker workshop nya mana gan

I had a couple of those Lansing 515Bs when I was hosting karaoke parties for a living. They served me very well indeed.

Wow, amazing skills. Thanks for sharing!

Seeing the entire restoration process means you earned all of the viewers, congrats 👏 looking for more of your How To videos.

Very nice restoration process, congratulations ! However, a rebuilt like this (or any other speaker) does not guarantee that the speaker will sound like the original one - materials will never be the same, specially decades later! There are many variables that influence final performance: wire thickness, copper purity and resistance; total coil weight; cone paper quality & thickness; quantity of glue applied.... and the list goes on with other minor details. Sometimes the speaker gets better than the original one since some modern materials can be better. But what matters here is the the restoration process, which was fully accomplished, thanks for sharing !

@SatriaSpeaker

2 жыл бұрын

Claudio and I thank you for your comments of course what you say is true. Behind the limitations I apologize and thank you for enlightening. Have a nice day.

@alext8828

2 жыл бұрын

Get the Loudspeaker Design Cookbook by Vance Dickason. It addresses the "System" and its alignment to tune the frequency response thru crossovers and cabinet design.

@TIMEtoRIDE900

2 жыл бұрын

......"does not guarantee that the speaker will sound like the original one" ...... Looks to me like they made a VAST IMPROVEMENT to the original one, but a side-by-side audio comparison is in order !!

@jorgefernandez8638

2 жыл бұрын

@@TIMEtoRIDE900 They used a coil of normal copper wire, instead of flat copper tape like the original. That is not an improvement. Either way, the love put into the work is appreciated. Congratulations!

@DonKelleyMusic

2 жыл бұрын

@@TIMEtoRIDE900 He did an amazing job! But altec voice coils were unique. On top of that, we of course don't have the tolerances and specs of how deep the voice coil is versus the original. But all that being said, it is an excellent speaker now, and I'd love to hear it in a properly sized sealed enclosure

SALAM SEJAHTERA BAPA, KERJA KAMU SANGAT2 TELITI DAN SUNGGUH ANGGUH TIADA PERTANDINGGAN. SELAMAT MAJU JAYA.

Simply beatiful restoration

Remarkable restoration. I enjoyed this.

@SatriaSpeaker

2 жыл бұрын

Thank you for the support, have a nice day ♥️

Excellent travail de restauration d'un 515B série 2 ! Malgré la membrane non d'origine le rendu sonore est très bon ! Bravo !

Mantap restorasinya keren.8

keren barang bekas jd baru

it sounds amazing from a cell phone and without a cabinet, imagine listening to this beauty live in a room and within a proper enclosure. Amazing restoration !

@bakunawa534

2 жыл бұрын

You have to be really stupid

@archiekins82

2 жыл бұрын

@@bakunawa534 Why though?

@mickcarson8504

2 жыл бұрын

What? From a cell phone? LOL, looks like you have never been in a cinema in the 70s with their Quadra-track sourround sound system used on films like Earthquake, towering Inferno, etc. Would you get that blasting sound on your mobile?

@woodgrainstudios7321

2 жыл бұрын

I agree with Frank Mayer,..this sounds great on my phone...I think yall are missing the point

@bakunawa534

2 жыл бұрын

@@woodgrainstudios7321 the point is our phones cannot replicate nowhere near the sound quality of the speaker..... You happened to be another 🥴

What an amazing job! True master of your craft.

@SatriaSpeaker

2 жыл бұрын

Thank you so much for the support, have a nice day

Mantap ni hadir terus fens banget Satria sepiker maju terus dn di beri kesehatan selalu amiiiinn Dr malasiya hadir terus

watching and sending support thanks for sharing

Wow... truly remarkable craftmanship! Awesome to watch. I can't figure out how the voice coil gets aligned so precisely that it doesn't get scraped by the magnet. I thought there'd have to be some sort of precision jig to align the parts when gluing them down.

this is so far the best woofer restoration and the spoon l as a tool use is amazing!

@SatriaSpeaker

2 жыл бұрын

Thank you so much Coqui Audio for the support, have a nice day

@CoquiAudio

2 жыл бұрын

@@SatriaSpeaker yes sir 😊

Terbaikla kawan..dapat buat kembali...ok sdh di hitam ya..support sama👍🤝

Mantap dan makin sukses, terimakasih ilmunya.

I bought my SEAS speakers 50 years ago and they still sound just fine.

Old Altec Lansing speakers are the best, they sound great. I have 2 pre 80's, one meter high, stereo speaker boxes that sounds great with a 180 Watt amplifier when playing 45 rpm vinyl and LP 33 rpm records on a turntable. The tall speaker boxes have 2 x 10 inch bass speakers, 2 x 6 inch mid range and 2 x 4 inch tweeters each, boasting beautiful, rich, natural sound. 😀

@dimasfosdiamondkenalkanaku8310

2 жыл бұрын

ApA

@new-knowledge8040

2 жыл бұрын

I threw my speakers together way back in 1978. Speaker box size is 812H x 520W x 407D. They each contain one 15" woofer, two mid-range, and four tweeters. Plus they are mirror images of each other rather than identical. I have only had to replace the outer foam ring for each woofer. Total cost was $27 CAD.

@jassonburt6045

Жыл бұрын

Friend of mine brought out some 80's Klipsch speakers once at a studio . Just 2 of them blew away the system they were using .

Keren banget sobatku Salam sukses sehat disana

REAL NICELY DONE MAN...FROM BEGINNING TILL THE END!!!!👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

I have 2 Voice of the Theater speakers with the 515 speakers. They are in the model 19 oak cabinet. I used to sell Altec audio equipment. In my opinion these were the best speaker ever made. Sitting in front of them playing a half speed master vinal record of Neal Diamond "Hot August Night" you would think you are in a live concert.

El mejor trabajo de restauración de una bocina que he visto y el mejor trabajo de enconado que he visto, saludos desde México.

way cool .the old speakers are real nice.

Joss keren mantap pak 👍👍👍

The size and mass of that alnico magnet is nothing short of amazing. The magnet of a typical alnico guitar loudspeaker is a fraction of the size.

@cyrillepinton3398

Жыл бұрын

It's inside magnet, not outer ring, as you can see at the opening. Also the driver use 76mm coil, thus field gap, while guitar driver us 38mm coil.

@928CS

Жыл бұрын

That is true for the most part. However, the JBL D and K series speakers have a 4" voice coil and huge alnico magnet, and are my favorite guitar speaker.

More than likely , they've improved the driver significantly more than it was originally ! Through R&D , the materials and technology used on sound reinforced speaker , and cabinet design , are always improving . Can't say as much for the pricing , YIKE'S!!!!!

@stephensaines7100

Жыл бұрын

That's a generic made voice-coil, notably inferior to the flatwound high-temp original.

Wah....! Hebat sungguh saya tidak menyangka kalau ini Chanel anak bangsa. Terus lah berkarya saya bangga semoga berkembang dan sukses selalu. Tambahan sedikit, berilah keterangan tentang ukuran nama bahan dan lain lain yang dianggap perlu.Terima kasih.

Most impressive...excellent job. 👍👍👍

Olá amigos 👦👦👦. Ótimo trabalho e o alto falante tem maciez. Não precisa de muita potência para produzir SOM. Parabéns pelo trabalho. Abraços a 👪 e amigos. Ok 👍

exelente restoration 🔊😊👍

@SatriaSpeaker

2 жыл бұрын

Gracias por el apoyo, que tengas un buen día. ♥️

Super mantab pak bos👍👍👍👍

Very good job 👍👍👍👍👍👍 Thanks you 👍

Orang LN lebih suka konten lokal yg kyk gini. 👍🏼

@vinzzZ004

Жыл бұрын

🗿

@aaronsceilingfansspeakersa3057

9 ай бұрын

💀💀💀

@rn_audio

8 ай бұрын

Apakah kita nyasar

@fahrifahri3397

3 ай бұрын

TDK tp orang luar yang kesasarr

@fahrifahri3397

3 ай бұрын

TDK tp orang luar yang kesasarr

biyuhhh kok nemu harta karun mas eko... hasil akhir yang luar biasa.. sukses terus dan sehat selalu buat team satria..🙏

@SatriaSpeaker

2 жыл бұрын

Aamiin Terimakasih banyak mas🙏

Top markotop 👍

rijik tenan garapane👍👍👏👏

Valuable piece of history there, great job!

@SatriaSpeaker

2 жыл бұрын

Thank you

@reffhpakins8046

2 жыл бұрын

Wah ...ada KZread satria...merk apa speekernya ? 𝒔𝒖𝒌𝒔𝒆𝒔 𝒑𝒂𝒌 𝒆𝒌𝒐

Konten nya pak eko Makin hari Tambah keren 👍👍

videonya bagus, selamat teruskan videomu yang bagus

The Altec 515 (and 416) is one of the most famous drivers in all of audio. Early AlNiCO versions like this one are highly sought after.

@themadmallard

2 жыл бұрын

what were they used in?

@tomgripple4935

2 жыл бұрын

They seem pretty easily obtainable. I found them starting around $200 each.

@Jammerk40

Жыл бұрын

@@themadmallard They used these in Movie Theaters mostly behind the screen for bass and voice and on the walls were surround speakers as well! Great speakers!

Trabalho ficou muito bom parabéns gostei

Sounds as if you were there! Great Jazz!

You guys look like you have so much fun doing this its great

Beautiful restoration on this speaker! They use these in movie theaters and guitar amps! Very powerful and could take a lot of power as well!

Que Trabalho Maravilhoso, Renasceram Das Cinzas Este Velho Alto Falante , Gostei 👍🏽 Muito Bom Mesmo

@SatriaSpeaker

2 жыл бұрын

Obrigado Sr Michael barbosa pelo apoio tenha um bom dia

@lucascodignole24

2 жыл бұрын

@@SatriaSpeaker ola boa noite ficou perfeito o seu trabalho parabéns....e vc sabe de qua data ou em qie ele era isado?

Totally amazing...I bet some of the old guys from Altec and JBL who have seen this are saying to themselves "those boys are good" and they'd be right. Good old fashioned hand tools, a steady hand and a good parts source. I am seriously impressed.

luar biasa . skill kemampuan dlm bidang per speakeran ..

@SatriaSpeaker

Жыл бұрын

Terima kasih banyak dukunganya

A thoroughly professional job. Well done and keep up the very good and important restoration work.👍

@gudduyadav8292

2 жыл бұрын

Sàa To 00rrtrrr

@gudduyadav8292

2 жыл бұрын

Sàa Aaas

@bahdengpyngrope1323

2 жыл бұрын

@@gudduyadav8292 ym sngewthuh re phi ong kumno ruh

@bahdengpyngrope1323

2 жыл бұрын

@@gudduyadav8292 ktien aiu phi kren

Sangat bermanfaat om 👍

Hard-working man. great man.

bagus banget om

Sensacional o trabalho de restauração! Great! from Brasil .

@wraudioproduction1033

2 жыл бұрын

Itu memang orang indo mas orang jawa

Mais foi belo trabalho de restauração 👍👏👏👏

@dakar0323

2 жыл бұрын

N{AO COMPENSA

Mantap mas.. Sukses selalu usahanya

semoga tanpa henti untuk selalu berkarya,mantaaaaap 👍👍👍❤

ALTEC LANCING 515 were used in movie theaters from 1961 to 1971... high-efficiency drivers used in conjunction with a midrange horn produce high SPL levels... desirable to audiophiles today, they were referred to as the "Voice of the Theater"

@KMFDM781

2 жыл бұрын

Extremely desirable. A pair of Voice of the Theater speakers are my dream speakers.

@drcowan3468

2 жыл бұрын

Cool story bro!

@sherrokinchen5253

2 жыл бұрын

It’s weird and fascinating how that speaker replacement basket looks just like the Peavey scorpion woofers 15425(4Ohm)and 15825(8Ohms), accept the magnet is different on The Peavey speaker replacement basket.

@Ralph2

2 жыл бұрын

I had one of those once (no cabinet) Beautifully made, I sold it for far less than it was worth even back then, of course regretted it ever since.

Trabalho perfeito , ficou top demais ! 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

Amazing video i am also a speaker manufacturer in India so much knowledge gain from this video thank you so much for teaching me

Mantap .selera musik juga asyik tu.

Eu também restauro Alto fantes de nível até pior com imã Souto ou amassados e muito bom ver eles tocando novamente

Sizin əl işiniz necədə gözəldir cənab .məndə liepzin L3060PB MARKALI DİNAMİKLƏR VAR OLARDA DƏYƏRLİ DİNAMİKLƏRDİR HƏMƏŞƏ GULƏRUZ OLAQ İNŞALLAH TƏKİ BAĞIRSAQLARIMIZ BOZ RƏMGDƏ OLSUN AMİN SAĞOLUN ZCƏNAB

Brilliant great work watching from London uk

Pissy little magnet for a large speaker? Excellent work dudes...

punya yg bgni di indo.. amazing!!!

Sedikit tambahan frame yang bekas lapuk itu sebaiknya di cat spray biar lebih kelihatan baru👍👍👍

@SatriaSpeaker

2 жыл бұрын

Mungkin ada yang mau berdonasi buat membeli alat cat powder coating 🙏

Very professional I like it.

Very nice video 👍 on repair or restoration

@SatriaSpeaker

Жыл бұрын

Thank you very much

Muito interessante o seu trabalho . Eu não sabia que os imãs de alnico poderiam passar pelo desmagnetizador . Tenho várias caixas acústicas que eu mesmo construí e todas usam alto falantes de alnico , tanto graves , médios e agudos da década de 60 e estão em perfeito estado . Como são antigos , tive que combinar Jensen , Motololla , Hepnner , Zenith , Pionner , com as impedâncias de 8 ohms , casados com um divisor de frequências Bravox BD36 da década de 80 que por sorte encontrei à venda ainda na caixa . Aqui no Brasil , não se da tanto valor a esse tipo de alto falantes , daí processar uma reforma se torna difícil , quase impossível . Um abraço , meus parabéns pelo capricho .

@manuelacruz5177

Жыл бұрын

Não sei pra onde vai kkk .mas é interessante pra quem gosta né.

@eduardomembrive337

Жыл бұрын

@@manuelacruz5177 Não entendi o seu "não sei pra onde vai ". E aí ?

@manuelacruz5177

Жыл бұрын

@@eduardomembrive337 os processos de conserto , marcas ,modelos ,anos potência essas coisas .

@eduardomembrive337

Жыл бұрын

@@manuelacruz5177 Boa tarde , gostaria de agradecer pela observação ao meu comentário . Se você morasse em Belo Horizonte , eu a convidaria para escutar algumas músicas aqui no meu equipamento para desfrutar e conhecer a diferença na qualidade sonora que estes tipos de alto falantes proporcionam . Um abraço !

@fernandokosin2643

Жыл бұрын

Parâmetros de TS foram pro saco! Empirismo puro. Cachorro de 3 pernas tb anda….