Lightweight is good and what did I use it for it’s a lawnmower kzread.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.

Thank you, for the help, once I pulled the handle out all the way and tightened the two bolts back into place, I was able to pull the string and the mower started right up. :)

Thanks! I didn't do the starter rope step. This was quick and helpful!

I like a guy who knows a lot, but thinks like the novice. Great video.

Thanks man👍. This video helped me to install my Craftsman M250.

Thank you this helps a lot!

has trouble with the side discharge part of the installation. went to the craftsman site to for help. But this video explained it very well. thank you.

what do I do when the pull string won't release to start ?

@dayaneriesq

4 жыл бұрын

Exactly what has happened with my new lawn mower - the recoil starter does not release 😣

@bsquire1

4 жыл бұрын

It's the handle. Turn the 2 black dials till they come out and pull up the handle.

@brittanybeauty916

4 жыл бұрын

bsquire1 what handle?

@redactedxx4219

4 жыл бұрын

Solution. I had the same issue. I have the m210 and wasn't able to pull the cord out to the ring. It's the handle. There are two black twist screws near the rear wheels that are to adjust the handle length. It can't be the length it came out of the box in because I think that's just for storage. You need to take those out and extend the handle bar longer, and put the screws it. Now pull back the blade control handle and the cord should pull right out!

@burningrabbitacres8330

4 жыл бұрын

@@dayaneriesq so, what did you do beside frown? This happened to us.

Did you empty all the oil from the bottle that came with the box?

THanks you so much for the open the box part I thought it just hatches out like a Jurassic park dinosaur egg also the intro was very entertaining too great script especially the part where the fly lands on your hair!!!

Thank that’s was helpful first time bought mower 😂😂😂😁😁😁

What's the bolts name or size and the thing that tighten it ( time 1.01) I lost mine because i didn't put it properly

Looks just like my Troy Built mower.

@halfthe

7 жыл бұрын

Nah dude this thing got a big 'ol 7.25 American engine

The Viper and Honda Engines are the very best

Good Camera work.

@diannashebora2451

Жыл бұрын

Was it u? Lolol

How to release starter cord if stucked: I figured it out. So when assembling the handle pull the handle bar up til the 2nd screw hole then reattach the T bolt. When handle is left at the 1st screw hole it prevents the blade at bottom of mower from turning which prevents the starter cord from releasing. I'm so PROUD of myself!😄

Love it

u the real mvp

9/1/18 - I bought this lawnmower from Sears May 2018, and already the self propelled wheels stopped working!!!! I'm VERY disappointed. I have no idea why because the mower is only 4 months old. Has anyone else had this problem, and if so...how did you fix it?

I bought this same mower 2 years ago. The gas cap is crap and continued to fall off until I finally ran it over. I have looked all over online and yes at sears.com and no one has the gas caps....any thoughts? Checked ebay as well.

@nicholas8479

5 жыл бұрын

BlondeExplorer1 where did you finally find one?

Can someone please help me, I need a blade adjuster for a 126T02-0782-B1. I bought a universal from Lowes but it's too small. What is the product #?

thanks!

What’s the specific name of this model and model number?

Where is a Gas button to start before you start pushing and going?

Why didn’t u show u starting it

It would be nice to know what Craftsman model this is. M210? M230? M250? M260?

@ransompendragon623

Жыл бұрын

It’s the 10000 series

How to adjust drive control on, craftsman 220

Can get the starter cable out for the life of me

@dayaneriesq

4 жыл бұрын

I was going mayhem trying to figure out what was wrong 😂 Hope you figured it out.

@speakerdude1000

4 жыл бұрын

I feel you

@brittanybeauty916

4 жыл бұрын

I can’t get it out here

@brittanybeauty916

4 жыл бұрын

Either**

@jasxaf

4 жыл бұрын

for the reference of other poor souls trying to pull the starter cable up: the handle needs to be pulled out. loosen the bottom set of pins, pull the handle straight up to the second set of holes and refasten. the starter cable will then release.

thank you . instruction manuels are useless. I didn't know wear exactly the bolts went

how do I clean it?

Wow... I'm a noob and I wanted to see how u start this thing. U cut that right out when it mattered lol.

@dayaneriesq

4 жыл бұрын

How to release starter cord if stucked: I figured it out. So when assembling the handle pull the handle bar up til the 2nd screw hole then reattach the T bolt. When handle is left at the 1st screw hole it prevents the blade at bottom of mower from turning which prevents the starter cord from releasing.

At 1:17. I can't get the starter rope to budge.

@deb8677

5 жыл бұрын

Me either, no help anywhere

@andrewhurley4135

5 жыл бұрын

You need to squeeze the top blade control bar down and then slowly pull the rope. He did not do this in the video but it should do the trick. See page 8/step 7 here pdf.lowes.com/useandcareguides/043033587520_use.pdf?_gl=1*1fs4feh*_gcl_aw*R0NMLjE1NjA0NzkwMTUuQ2owS0NRanc2SWZvQlJDaUFSSXNBRjZxMDZ0bFJGMjk0Y1pqWUdVcEJGRmI2dFBVQVY2WnNKY0VnT25RMkZnU1p6VUFNYzh1eE02c0UxVWFBcTA0RUFMd193Y0I.

@dayaneriesq

4 жыл бұрын

I've tried the steps; holding the blade control control against upper handle and slowly pull starter rope handle from engine BUT it does not release. I knew I should've went with a rider mower

@dayaneriesq

4 жыл бұрын

I know the post/comments are from 3 months ago. But I figured it out. So when assembling the handle pull the handle bar up til the 2nd screw hole then reattached the T bolt. When handle is left at the 1st screw hole it prevents the blade at bottom of mower from turning which prevents the started cord from releasing. I'm so PROUD of myself😄

@birdog23

4 жыл бұрын

Day Q I’m not sure what you mean but on ours the cord doesn’t pull. It’s stuck. Gotta take it back

When Briggs doesn't start get your GumBuster kit at www.cleancarburetor.com

Who needs instructions

@jlologil

5 жыл бұрын

me

Hello

The music is really distracting.

1:15

Piece of crap. You cannot trust the newer briggs! Spend money for a good Honda.

@thatdonnyguy

5 жыл бұрын

I'm actually switching from a Honda to a Briggs. Tried a carb kit, then bought a OEM Honda carb, no joy, not getting fuel. The gasket layout is huge pain in the butt and I've put that back together for the last time.

@justindoel1764

5 жыл бұрын

He is talking about the new Plastic Junk carburetor engines