Very good description. Wish I had seen this when I got the unit which I love.
@BlichmannEngineering
13 күн бұрын
Glad it was helpful!
@anthonyricchiuti41282 жыл бұрын
I have spent a lot of time researching all the different systems out there as I want to purchase one soon. Blichmann is the one I keep coming back to.
@troop18us4 жыл бұрын
The unit looks good and an expandable future is very nice. Yes, I use it with the relay unit, HERMS two 5.5kW elements. My only complaint is the program: a timer goes ON with a step ramp temperature to the next stage. Is it possible to send you my control unit for reprogramming/an upgrade so the timer will be triggered with the target temperature and not with ramping up? Thank you.
@BlichmannEngineering
4 жыл бұрын
You can adjust this in the settings called MASH HEAT RATE. Review our manual for instructions how to determine what your mash heat rate is. This should fix your issues. Cheers!
@troop18us
4 жыл бұрын
@@BlichmannEngineering sorry, it did not help. I replaced the control board with Auber 310. It works. If you will decide to pull an upgrade I'll send you mine for reprogramming. The Auber looks a little ugly but does what I want to. Thanks for your help.
@PrismaScientific2 жыл бұрын
Can i get gas system with a 240v ? My pumps are 240
@danvisoiu35304 жыл бұрын
Will you make one for the European market?
@allenclapper46023 жыл бұрын
Hopefully someone can answer this question: Over the long haul, is it cheaper to get the electric or gas? I realize either way you have to pay to run wire or gas lines to wherever your setup is.
@p3brews736
3 жыл бұрын
electric is more cost effective
@BuckRogers24912 жыл бұрын
Can the gas version also work with 120V heating elements if gas is not being used at the same time?
@BlichmannEngineering
2 жыл бұрын
Our gas controller is specifically made for gas burners and will not work with an electric heating element. Cheers!
@codswallop10004 жыл бұрын
Will this work in the uk?
@JohnnyReverse5 жыл бұрын
so what size hole for the temperature sensor assembly ?
@BlichmannEngineering
5 жыл бұрын
The temperature sensor assembly fits through 1/2" holes. Cheers!
@JohnnyReverse
5 жыл бұрын
@@BlichmannEngineering thanks for the reply. Would this work with a 5500 w element?
@BlichmannEngineering
5 жыл бұрын
@@JohnnyReverse The BrewCommander will work great with a 5500W element.
Пікірлер: 18
Very good description. Wish I had seen this when I got the unit which I love.
@BlichmannEngineering
13 күн бұрын
Glad it was helpful!
I have spent a lot of time researching all the different systems out there as I want to purchase one soon. Blichmann is the one I keep coming back to.
The unit looks good and an expandable future is very nice. Yes, I use it with the relay unit, HERMS two 5.5kW elements. My only complaint is the program: a timer goes ON with a step ramp temperature to the next stage. Is it possible to send you my control unit for reprogramming/an upgrade so the timer will be triggered with the target temperature and not with ramping up? Thank you.
@BlichmannEngineering
4 жыл бұрын
You can adjust this in the settings called MASH HEAT RATE. Review our manual for instructions how to determine what your mash heat rate is. This should fix your issues. Cheers!
@troop18us
4 жыл бұрын
@@BlichmannEngineering sorry, it did not help. I replaced the control board with Auber 310. It works. If you will decide to pull an upgrade I'll send you mine for reprogramming. The Auber looks a little ugly but does what I want to. Thanks for your help.
Can i get gas system with a 240v ? My pumps are 240
Will you make one for the European market?
Hopefully someone can answer this question: Over the long haul, is it cheaper to get the electric or gas? I realize either way you have to pay to run wire or gas lines to wherever your setup is.
@p3brews736
3 жыл бұрын
electric is more cost effective
Can the gas version also work with 120V heating elements if gas is not being used at the same time?
@BlichmannEngineering
2 жыл бұрын
Our gas controller is specifically made for gas burners and will not work with an electric heating element. Cheers!
Will this work in the uk?
so what size hole for the temperature sensor assembly ?
@BlichmannEngineering
5 жыл бұрын
The temperature sensor assembly fits through 1/2" holes. Cheers!
@JohnnyReverse
5 жыл бұрын
@@BlichmannEngineering thanks for the reply. Would this work with a 5500 w element?
@BlichmannEngineering
5 жыл бұрын
@@JohnnyReverse The BrewCommander will work great with a 5500W element.
@JohnnyReverse
5 жыл бұрын
@@BlichmannEngineering ordering today! Thanks!