Ty for this video, I did it myself for under $10.00

Simple and clear video with all steps covered. One of the best DIY videos I’ve ever seen

Thank you! Instructions worked like a charm. The hardest part was disconnecting the electrical plug

@HowToEscapeDIYTipsandReviews

4 ай бұрын

Glad you got it worked out! Thanks for the great feedback!

This video was very good really a clear and understanding way to change the bulbs.

This is just the information I needed and it was presented in an easy too understand manner

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

Great! Thanks for the comment and glad it helped! Thanks for checking out the channel!

Thank you. I'm gonna attempt this tomorrow and this made it less intimidating.

Thank you I was going to take my 2017 to the shop buy looks like you saved me $150 for labor cost

@HowToEscapeDIYTipsandReviews

Жыл бұрын

Thats awesome!

i'm glad that you create this kind of videos, they are so usefull ! thank U a Lot!

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

Thank you so much for the feedback, Fernando- so glad that you've been able to use them!

Perfect directions!!!! Thank you!!!

You helped me with a wiper problem not long ago so I just knew there would be a brake bulb replacement video! You are the best! Thanks!

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

Thank you so much for the great comment Sarah! Hope all is well on your end- sorry for the delay!

Thank you for this video!

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

Absolutely! Hope you were able to use it and that it was helpful! Thanks for leaving the comment :)

Any shot that you'd make a video for the front turn signal bulbs? Things are a giant pain to get to.

Very simple. Had to replace whole assembly and followed instructions. Everything fell into place and this was on a 2017 Escape which was a little different because of connector. If you're not a complete idiot, you can adjust what you are seeing to what you see.

Great video.

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

Thanks Mike! Please give a shout if there's anything you'd like to see a video on if it's not already made! Thanks for checking out the channel!

I learned a great trick from the body shop guy at my local dealer when mine had to be replaced. It was tough to remove, so he used green painter’s tape and put about 4 or 5 16” pieces on the side with long 8” tails hanging off. He used that as a handle and popped the light assembly right out.

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

Oh wow! Thats pretty cool. I'll have to try that- is it ok if I quote you on this in a video if I can get it to work? Just to demo for everyone?

@pinhighdiscdyes

3 жыл бұрын

@@HowToEscapeDIYTipsandReviews absolutely! I thought it was pretty cool, never would have thought of it and I’m always scared of using a tool

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

@@pinhighdiscdyes I hear that... I feel like my escape has had a pretty good life of being the testing guinea pig for making a lot of these videos so I'm usually ok with trying something new... however...when these light assemblies are stuck and a lot of force is put on them, I do worry about the wire harnesses underneath which experience the violence of when it finally breaks free! The tape seems like a pretty neat way to go about it

@pinhighdiscdyes

3 жыл бұрын

@@HowToEscapeDIYTipsandReviews yeah, exactly. Just in case it helps, he just did one short quick jerk and kind of secured it with his free hand and it came free first try.

@mjbuhr64

2 жыл бұрын

Just used this painter’s tape trick when replacing the brake lights. Much easier than when I replaced the turn signal and pulled on the housing the hard way - thanks!

How awesome thank you

Thanks!

@HowToEscapeDIYTipsandReviews

10 ай бұрын

Hope it helped! Thanks for taking the time to leave some feedback and for subscribing to the channel!

Has anyone made any aftermarket or tinted tails for our 2014 era Escapes?

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

Hi John! I HAVE seen some people get the Kuga tail lights and mount them in our North America Escapes- they look pretty slick. Haven't seen a factory tinted TL, but I imagine there has to be some aftermarket options out there too- probably LED... I'll do some research :)

Have you heard about "Redline Tuning" Hood Quick Lift struts to replace the hood holding rod with struts?

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

I have! I think the kit looks slick- only drawback I've seen so far is that it mounts to the same.scrws that hold the cowl to the engine bay so if you use the cowl removal method for battery access thats the only pain point. I think its great though- would love for some lift assist and not having to work around the hood strut with normal engine work:) do you have it?!?! I would like to know your take on it if so!

@d.beamer6907

3 жыл бұрын

No, I don't have it yet. Still researching. If you go to redlinetuning,com you can see the package is bolted to the hood hinges and an existing bolt location behind the headlight housings. You do have to drill a hole in the hood hinges. I really would like to discontinue the silly hood post used now. Just wondering if you saw it and if you would be willing to test it out...?

@d.beamer6907

3 жыл бұрын

Hey Rahrena, I got the kit and installed it today. It is SWEET! Not too big a job. Hood opens on it's own and farther than with the silly hood strut. I don't have all the filming equipment that you have or else I would have shown that... Anyway, they sell on Amazon so if you do yours maybe you could include a link for that too. Just wanted to let you know and thanks for all you do on KZread!

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

@@d.beamer6907 awesome!!! So if its not where the cowl is and in the locations you say then thats good news! I'll add the kit to the list of upcoming videos! Thanks for the recommendation and the feedback from your install!

In my research I found that in 2020 they changed the brake light housing. You'll see only one screw holding it in, and instead of pulling it back, you push it outward. You'd snap off the retaining rods if you pushed it backward.

A 5/16 driver works too if you don't happen to have an 8 mm

How to change on A 2016 the parking lite on a town and country 2:11 .

How about the reverse lights?

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

Good question- right here! kzread.info/dash/bejne/ha2ft9p_l9zVhLg.html

My parents have a 2015 ford escape se fully loaded and I like the escape and as my first car I bought back in April of this year got a 2014 ford escape titanium 2.0 ecoboost with 50,000 kms the only option I am missing is the panoramic moonroof which I did not care about

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

That sounds awese, Nicholas! Hope you like the 2.0! Mine is 1.6 but I drove the 2.0L and the peppy increase in power is really noticeable! Hope it's a good car for you and that you enjoy it

@nicholascarioti6623

3 жыл бұрын

Thx! Its wired that mine did not come with the panoramic moonroof it was older people that I bought it from

@HowToEscapeDIYTipsandReviews

3 жыл бұрын

@@nicholascarioti6623 hah! Yeah it is strange that that feature isn't always on the docket but sometimes it's a blessing in disguise. Some people have had the piano roofs leak and they are riskier for carrying things on the roof of stuff shifts off the cross bars and falls on the glass. We use ours all the time and its certainly nice but there are a lot of awesome features on these cars even if they're 6-8 years old :)

@nicholascarioti6623

3 жыл бұрын

@@HowToEscapeDIYTipsandReviews that's what the original owner told me that his wife did not like the panoramic moonroof and that they leak