Brake lights dont work even after changing bulb electrical trouble shooting
Автокөліктер мен көлік құралдары
Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#brakelightsdontwork #brakelightdontwork #bulbdontwork #howtocheckpowerinbrakelightbulb #brakelight #brakelamp #lightsdontwork #electricaltrouble #howtoelectricaltroubleshoot #howtocheckpower #howtocheckground #power #ground #nopower #bulblight #siennabrakelight #hondabrakelight #toyotabrakelight #acurabrakelight
Пікірлер: 221
I said God please help me find a way to fix it and this video comes up thank you so much it worked
@RBTheMechanic
Жыл бұрын
Nice job!! Thank god u found this video god is always there for u lol !!!
@michellesancheznunez316
Жыл бұрын
Amen! In same spot!
@PUMAONE
10 ай бұрын
God is great!
@zavinci2372
10 ай бұрын
God is good brother, God bless!
@justhechamp1
6 ай бұрын
So is the spying ass phones listen to your conversations then suddenly something you talked about shows up in your feed lol
Yes, exactly as RB said. I had the same issue on a backup light on my son's car. I noticed he was backing up and the one backup light was out. No worries. watched another youtube video, popped off the lenses, replaced the bulbs. It still didn't come on. I thought there has to be power because the rest of the lights in the same lighting harness worked. I used a small screwdriver to pull out the contacts as RB instructed and lights on! Thanks for taking the time to make the video to help me!
@RBTheMechanic
Жыл бұрын
Nice job I’m glad u found my video and checked this out. It would had been electrical disaster if u went to electrical mechanic he would had changed so much !!
Thank you! This actually was the problem! Saved me a ton of time!
@RBTheMechanic
2 жыл бұрын
Nice job!!!
Great advice and instructions. My brakes lights went out in my Buick Enclave a month after I changed the bulb. So I checked the fuse and it was not blown, so I was scratching my head. Then I pushed the contact points up, like you said, and bam, all good! Appreciate you!
@RBTheMechanic
3 ай бұрын
Nice glad u figured it out!!! I had few cars come in with same issue they went to 3 different shops and this was it
Out of the 50 videos I watched you’re the one that help me fix it
@RBTheMechanic
5 ай бұрын
Cool glad video helped u out!
@vincegallegos1999
5 ай бұрын
I even changed out the fuses, the bulbs and the light switch so thank you
Good idea. Thanks so much. I'll work on it in the morning and get back with you Tomorrow. Good Idea.
This is an excellent suggestion. It took me ages to figure this out on my truck.
@RBTheMechanic
Жыл бұрын
Yeah
I was worried it was the wire harness, after switching the bulbs and fuse. Turned out it was dirty contact spot. You rock!
@RBTheMechanic
Жыл бұрын
Nice good job fining the issue!!
@annaeury5747
Жыл бұрын
@@RBTheMechanic I have a 2004 ford focus se . I have checked the fuse and changed the bulbs out and got a new brake switch and my brakes still isn't working? I do have the third brake light that does work only. Any suggestions please??
@RBTheMechanic
Жыл бұрын
@@annaeury5747 u need to check schematic I have done down Vic’s town cars they has issues cluster switch which let the third brake light runs but other two dosent anways need to check diagram to see how it runs also have light control moduel
Bro.... Thanks man. I was checking for power from the rear of the terminal and was getting power. I didn't even think to check those connects smh. Thank you so much man.
@RBTheMechanic
Жыл бұрын
Oh ok yeah always got to check connection I had bad experience with some issues similar to this I had power window switch on mdx connector didn’t make good connection even tho it was well plugged in but didn’t work out everytime it hit a bump it moved I stuck card board under it and it’s holding in place
Life saver man I was going crazy checking all fuses and wiring thank you 🙏
@RBTheMechanic
7 ай бұрын
Cool this happned to me few times new bulb didn’t make comnection
OMG, I watched at least a dozen videos and none of them suggested doing what you just did, thank you so much for your expertise, I'm going to definitely try this.
@RBTheMechanic
9 ай бұрын
Yup also make sure u check bulb size is correct
Thank you so much! you saved me a trip to the mechanic.😃
@RBTheMechanic
2 ай бұрын
You are welcome!
One of the most helpful videos I ever seen 👍.
@RBTheMechanic
Жыл бұрын
Yup thank u
@fikia101
Жыл бұрын
@@RBTheMechanic you saved me lots of time and nerves. Thank you one more time!
@RBTheMechanic
Жыл бұрын
@@fikia101 nice !!!!
Car owner- Bob Mechanic- Bob Bob's car had no lights and took it to his mechanic. Bob told Bob the bulb is dead and Bob asked Bob how much for the bulb.
You just saved us!!! Thank you so very much!
@RBTheMechanic
7 ай бұрын
Glad video helped u guys!!!
Appreciate the video! Helped perfectly with the issue I was having with my car 👌🏽
@RBTheMechanic
2 жыл бұрын
Good job!!
@DILLIGAS-GAMING
Жыл бұрын
@@RBTheMechanic Hello , I need help , I fix my own stuff but this has me beat , 98 Mitsubishi pajero / montero lwb gls , I have no top brake light and no rear wiper , i have turn signals , bottom brake lights work , I have tested the bulbs and the cluster and fuses , I hit a huge pot hole smelled some plastic burn, lost my alternator the A/T light battery light came on was down to 9v I replaced with new one thats all good but I can't find why brake and rear wiper won't work , is there a relay or something obvious or secret im missing ? any ideas? Would massively appreciate any wisdom I'm not usually one to ask but I have to admit I can't work it out .
@RBTheMechanic
Жыл бұрын
@@DILLIGAS-GAMING u need wiring diagram and track the wire and do multiple check point to see if it has short
@DILLIGAS-GAMING
Жыл бұрын
@@RBTheMechanic thanks mate I'm doing next that seems to be the consensus, no easy normal fix on this one 👍
Thank you! This saved me so much headache
@RBTheMechanic
Жыл бұрын
Nice job!!!
Thanks for this. This worked great
yo!!!!! 11 months later this video helped me!!!!! 06 scion xb baby! Ty to all the patrol cops who let us pass with a warning to fix the problem. Thank God for that kindness still being in the world. Let's get it!!!!!!
@RBTheMechanic
Жыл бұрын
Ojs ok glad u found the video Somthing simple!!!!
Great video dude 👍🏿
Thanks Dude👍🏿 Fixed the problem.
@RBTheMechanic
Жыл бұрын
Good job
Thanks so much appreciate it keep up the good work
@RBTheMechanic
Жыл бұрын
No problem!! Always here to help
Thank you for sharing this, I had a passenger tail light out of my Toyota and I looked at the bulb and it was fine. I replace the bulb and it still would not work, but the other two work fine so I knew it wasn't a bad break light switch. I figured it was a bad contact inside the break light socket I tried moving one of the pens around there with a bobby pin but nothing I'll try using a flathead screwdriver maybe that will do the trick Thanks again and God bless! ✝️🙏
@RBTheMechanic
Жыл бұрын
Ok try this
@Eurospec73
Жыл бұрын
@@RBTheMechanic Here's an update, the good news is, I was able to use a flat head screwdriver and move the 4 prongs outward a bit. Within 10 minutes I got the the taillight bulb working again. But the bulb kept flickering, finally i got to stay solid. Hopefully it will stay on✝️🙏 Thanks again man.
@RBTheMechanic
Жыл бұрын
@@Eurospec73 nice job!!!
@Eurospec73
Жыл бұрын
@@RBTheMechanic thanks RB absolutely 🥳🎉💪🎇
@RBTheMechanic
Жыл бұрын
@@Eurospec73 welcome!!
Good idea. Im gonna check contacts before i replace
@RBTheMechanic
Ай бұрын
Yup
Gonna check it...thank you!
@RBTheMechanic
11 ай бұрын
Welcome
This worked for me thanks!!
@RBTheMechanic
Жыл бұрын
Good job!!!
Thanks for the help
@RBTheMechanic
Жыл бұрын
Welcome
Exact fix for my issue!
Thank You !
@RBTheMechanic
Жыл бұрын
Welcome!
Thanks RB, gonna try this on my cornering light. How would I check for voltage at the socket with a multimeter? Thanks
@RBTheMechanic
Күн бұрын
Yes or test light
@hittz8331
Күн бұрын
@RBTheMechanic just touch a contact in the socket and look for 12volts with switch on?
@hittz8331
Күн бұрын
Thank You Much RB!!! I will check back with results...
Thank you, Thank You!!
@RBTheMechanic
2 ай бұрын
Welcome
Dude instantly fixed my problem 🔥
@RBTheMechanic
2 ай бұрын
Nice good job!!!
Thanks dude!
@RBTheMechanic
Жыл бұрын
Welcome
It absolutely does matter what vehicle you have when everything is good but the brake lights aren't working. Depending on the car depends on the problem. You should know that.
@RBTheMechanic
4 ай бұрын
Yes
Hi. Informative. Where do I start when none of the left side tail light or park light (front) is not working? Fuses are ok. Mitsubishi Pajaro.
@RBTheMechanic
5 ай бұрын
Start with check power and ground at each connector and try in new bulbs
Thanks ill try it on my reverse bulbs
@RBTheMechanic
Жыл бұрын
Yup
Thank you
@RBTheMechanic
Жыл бұрын
Welcome!!!
Thank you for the video. I have a 2018 Camry and passenger brake light is not turning on. It appears there is no actual bulb for the brake light but instead an LED module for about $35. Would you recommend I replaced with a module? should I still check the fuses even if one side is working? Thank you.
@RBTheMechanic
8 ай бұрын
Umm those leds r issues u might have to take the chance and replace it gotta start sumwhere
@himartinez3515
8 ай бұрын
Entire Tail light was purchased.
@RBTheMechanic
8 ай бұрын
@@himartinez3515 y?
Do you know what would cause both brake lights to stop working, when head lights are turned on?
@RBTheMechanic
Жыл бұрын
Usully both bulbs are out I get those lot change out ur bulbs first before u take a long route
Thank you so much im gonna go try this right now. just replaced the entire assembly and it still didn't work. One more question. Is the fuse for these tailights under the hood or behind the steering problem. 2012 sienna thank you!
@RBTheMechanic
9 ай бұрын
I think it’s mostlikely 99% chances under the dash
@Unemployedrobots
9 ай бұрын
@@RBTheMechanic found it. Turned out it was just the bulb. When i last had it serviced at toyota oxnard the mechanic said i had to replace the whole assembly and it was led he was wrong lol i found out it was just the bulb since the plastic cover is off i just ordered some led replacements thank you.
@RBTheMechanic
9 ай бұрын
@@Unemployedrobots nice Good job
@Unemployedrobots
9 ай бұрын
Thank you!! @@RBTheMechanic
Thanks 🙏🏾👍
@RBTheMechanic
4 ай бұрын
Welcome
Lol. The part when you said the cop pulled you over for no tail lights. That's why I searched topics on this and found your video. 😂😅. Do you recommend any mechanics in the Southwest Houston area ?? Thanks for the detailed video
@RBTheMechanic
3 ай бұрын
No I don’t have any contacts out there I’m in north NJ however. Best mechanic for simple stuff is do it urself!!
good vibes sent your way
@RBTheMechanic
7 ай бұрын
Thank you
Should I turn on the lights before I check the tail light fuses by test light ?
@RBTheMechanic
8 ай бұрын
Key on and yes that would be best
I got a 09 mustang 2/3 turn signals don't work but all 3 work when I hit the brakes . Any idea?.
@RBTheMechanic
2 жыл бұрын
Ok change the bulbs. The bulbs are dual filament in another work 2 bulbs in one so one flair is out on each bulb before anything change the bulbs
Thanks
@RBTheMechanic
Жыл бұрын
Wecome!!
Excellent
@RBTheMechanic
16 күн бұрын
Thanks
I have a 2017 dodge durango the driver side brake led light wont come on but the brake light works fine
@RBTheMechanic
Жыл бұрын
If u got led lights it need the whole light to be replaced before doing the replacement check fuses and check power and ground in to the connector of the light to see if it got the power and ground with test light have some one press the brake peddle
I know this is a long shot considering this is an old video but I have an issue with my tail lights I have power to my tail lights I guess it would be the running lights the blinker and break light on the same bulb do not light up but the running light is on any ideas on how to fix I changed the bulb multiple times
@RBTheMechanic
Жыл бұрын
Well blinker and brake bulb can’t be on the same bulb so u have 2 diffrent issues start with checking to see if u out in correct bulb. Any connector with 3 wires has to have dual filiment bulb I would replace the bulb and check to see if it got power and ground when pressing brake and then move on to chancing blinker
There’s a part connects on ur brake assembly it’s called brake light switch I replaced bu dry T now car don’t turn off
@RBTheMechanic
13 сағат бұрын
But dry t?
@OGALEX-pm3bh
13 сағат бұрын
@@RBTheMechanic my phone messes up my typing I meant the car won’t turn off now
Thanks for the video. I did everything you suggested. However, the problem still persists. I might add the lights work. Any other suggestions?
@RBTheMechanic
Жыл бұрын
Is it only one light now working?
@clos5700
Жыл бұрын
@@RBTheMechanic yes
@clos5700
Жыл бұрын
@@RBTheMechanic the lights both work. The right brake won’t illuminate
@Juelz3684
Жыл бұрын
Same with my s10 truck right tail light works but not the brake
Thank you so much! I’d gladly Venmo you some money!
@RBTheMechanic
Жыл бұрын
No problem I’m in my toughest time but I would ask My Channel is to help everyone free of cost !!! Glad video was helpful!!! Stay subscribed
Hey brother I have a 2007 tsx. Rear lights work but rightside doesn't light up brighter when breaks are applied.
@RBTheMechanic
Жыл бұрын
Change that bulb and make sure it’s dual filiment bulb
nice video but how can you test a reg light bulb thanks
@RBTheMechanic
Жыл бұрын
U can’t test it I wouldn’t waste my time testing the bulb usully the fair brakes so u can test with oms meter of use power and ground so u know it got power and ground it has to lite up but some times the contac connects and start to work I would just replace it
Thank you señor!
@RBTheMechanic
4 ай бұрын
Welcome
@obecerra123
4 ай бұрын
@@RBTheMechanicif the socket is broken can you replace just the socket or do you have to replace the entire wiring harness. In my socket one of the contacts broke thank you. Nissan Sentra 2010 can’t seem to find just the socket online
@RBTheMechanic
4 ай бұрын
@@obecerra123 yeah u sure can and not expensive part quick repair
I got a 2012 scion tc got leds parking light blown out & car won't start ABS & Traction lights are on
@RBTheMechanic
2 жыл бұрын
I doubt the led lights have anything to do start staring but u never know why don’t u start checking all of ur fuses other wise u need to check the starting system
I hope that’s what I have going on. I figure if it’s a fuse both lights would be out, and the bulb i replaced looked fine and it’s less than a year old.
@RBTheMechanic
11 ай бұрын
Bulb can go out in a month so check to see bulb or this replace it
I have same problem on my Nissan titan 2018. They said its a wiring issue and I got a quote of 1200 to diagnose and replace wiring. I'm going to try to fix it myself. My brake lights work when I step on brakes but when I take foot off the brakes are dark. I've been getting flashed by people behind me.
@RBTheMechanic
9 ай бұрын
I would first replace all the bulbs then get back to me make sure u out in correct bulbs they crazy with that price so start with this
I have a UTV and the tail lights work, but when I apply the brakes, the left brake light works properly, but the right side goes completely out. Tried a new bulb and it didn't help. I believe it may be a ground on the right side, but how would I check this?
@RBTheMechanic
11 ай бұрын
Could be ground check both power and ground also check to see if the pins are making contact like I show
Hello, I replaced the brake light switch on my 2004 Tahoe, cause I had no break light coming on. Now with the new brake light switch the break light comes on but it stays bright, please help. thank you!
@RBTheMechanic
Жыл бұрын
Might be bad switch or wrong double check ur work
Hi, I have 2012 Honda crv. The taillights on both side not working but braking lights are working. I went to auto shop and had done the diagnostic and they said it's not blown fuse and can't see any wire problem. They pop up the fuse maybe and the taillights are on. But after few weeks they not working again I guess it could be the rain and the water get inside, either way I don't know. Any ideas what causes. Thank you.
@RBTheMechanic
Жыл бұрын
Yes could be. Replace the bulbs anyways make sure u out in correct bulbs some times it could be faulty bulbs
@daydreamerkatie12
Жыл бұрын
Did bought the right bulb but still not working.
Man I’ve got a 2010 jeep wrangler and the brake lights stay on with key on and also vehicle running. Brand new tail lights, the old ones didn’t same thing. Left blinker blinks fast, right blinker blinks normal. “Electric specialist” told me that I had an ABS module out of a 2013 jeep. I do not have a ABS code. What do you think?
@RBTheMechanic
5 ай бұрын
Try to pull the fuse for brake light to see if brake lights go off. If they do then unplug brake switch to see if brake light go off but fuse has to be back in last part is the brake switch stopper there?
@bowtiebuilding
5 ай бұрын
@@RBTheMechanic ok I will do this when it autos raining, hopefully by tomorrow evening. There isn’t a stopper, it’s just a plunger attached to the brake light switch.
@bowtiebuilding
5 ай бұрын
@@RBTheMechanic with key on the brake lights stayed luminated and when I pulled the fuse they stayed on
@RBTheMechanic
5 ай бұрын
@@bowtiebuilding with fuse out they stayed on?
@bowtiebuilding
5 ай бұрын
@@RBTheMechanic yes sir fuse out it stayed on
The plastic casing that holds my bulb cracked so i need to rewire new casings.
@RBTheMechanic
6 ай бұрын
Oh ok
Can this also cause a battery drain?
@RBTheMechanic
8 ай бұрын
No it can’t
If I turn my headlights on, my tailights light up but no brake lights working ford ranger
@RBTheMechanic
7 ай бұрын
Start with replacing the bulbs
What if has low voltage on back fog light ? Only 6 volt instead of 12.
@RBTheMechanic
9 ай бұрын
I had case like that it was the relay check the circuit
@sandrudaniel19
9 ай бұрын
@@RBTheMechanic circuit mean the cable? How am i supposed to check cable from front to back of car ?
Hi my back light water gets inside the brakes work when I have the lights on the light in the back doesn't turn on can you help me.
@RBTheMechanic
Жыл бұрын
Gotta resolve the water issue maybe need new housing assembly of light
Hey I just changed my brake light bulbs to LEDs and they work when turned on but doesn’t get brighter when my brakes are stepped how do I fix this
@RBTheMechanic
Жыл бұрын
Well u might have wrong bulb or not propper connection
@brandonirizarry4247
Жыл бұрын
@@RBTheMechanic Ok I’m guessing the connection because I ended up putting my old light bulbs in and the brake lights still won’t get bright when brakes applied. Guessing it messed up my wires 🤦♂️
I had a mechanic come out & install a new starter on my 2008 nissan versa because it kept dying, the battery was new so it wasn’t that. He insisted it was the starter. We paid him $120 for labor only for the car to die again after he left, He came back the next day to fix it, but now my front passenger light won’t come on unless I have the brights on so I know the bulb is good. The brake lights won’t come on anymore unless I have my lights on, so now I have to drive around even during the day with my lights on so that my break lights will work. They do come on so I know that the bulbs are good & it has to be some sort of electrical problem he caused. Any ideas?
@RBTheMechanic
Жыл бұрын
I’m not sure if I understand stand u correct but tell me again just the light part Ur brake lights don’t work? Unless u keep head lights on ? But I don’t think he could have done anything but u never know
@64nessa
Жыл бұрын
@@RBTheMechanic yes that’s correct, everything was working fine until he messed with my car. He took out a fuse box & messed with it then put it back & I think that may be the issue. My break lights will not work unless I turn on my headlights, then they work fine. So now in order for my brake lights to work I have to drive around with my headlights on even during the day. Plus my right passenger head light doesn’t work either now, only the driver side headlight works when I turn them on. I think the passenger head light only works if I put my brights on, unless the brights & regular lights are two different bulbs, if that’s the case then only my brights on that side work but I think the regular & brights are one bulb, if so then the bulb only works when I have my brights on. I hope im making sense.
@RBTheMechanic
Жыл бұрын
@@64nessa maybe he yanked some wires but check to see have some one help u press the brake peddle and see if it work without head lights on
@64nessa
Жыл бұрын
@@RBTheMechanic me & my mom did that already, the brake lights don’t work unless headlights are on, she stood behind my car & they wouldn’t work, once I turned my headlights on they started working
@RBTheMechanic
Жыл бұрын
@@64nessa oh ok well this is electrical issue I’ll check the diagram tomorrow maybe I’ll find somthing on my computer will update u
I have a 2017 ford transit connect and brake light bulb malfunction is popping up and I’ve replaced bulbs three times and nothing popping up
@RBTheMechanic
Жыл бұрын
It could be circuit issue
My brake light works, but it doesn't light up when I press on the brake. My bulb acts as both the tail light and the brake light. Only one works.
@RBTheMechanic
Жыл бұрын
Check the connections like I show if other side is working this should work also check fuses
I have a 2001 maxima The break light switch keeps burning out . Also the ABS light is one . Related ? I have replaced the break light switch x2 and with in a week it’s broken again. All break lights were working g after replacing the switch but a week it’s broken again. Any ideas ?
@RBTheMechanic
Жыл бұрын
I had the same issue on Infiniti i30 2004 or somthing yeah of the time I had to replace the plastic part in there that drips the switch but I never had burned switch try oem I guess and it could be related to abs
Have 2013 tundra break light not working
@RBTheMechanic
Жыл бұрын
All lights not working?
@PedroAntonio-jw7rr
Жыл бұрын
@@RBTheMechanic just the break lights
@RBTheMechanic
Жыл бұрын
@@PedroAntonio-jw7rr ok start with checking fuses and replace the bulbs as welll I had customer who had all the bulbs bad and he was going crazy thinking it was electrical cuz all can’t fail it once little did he know they went out one at a time he just never noticed
great it worked
@RBTheMechanic
2 ай бұрын
Nice good job
Se controla nomas esos nomas quieren hacer negocio
@RBTheMechanic
Ай бұрын
Sorry idk spanish
@javierpaez613
Ай бұрын
@@RBTheMechanic diabetes is not reversible u can only control your sugar labels eating well and lots of exercise
@javierpaez613
Ай бұрын
@@RBTheMechanic am so sorry wrong video very sorry
My bulb is loose and every time i hit a bump it bedomes intermittent
@RBTheMechanic
Ай бұрын
Replace the bulb and check connections
@serbylowroller7857
Ай бұрын
@@RBTheMechanic I have 2 new bulbs. Everytime I go over a bump It seems to stop working. Sporadically it will work.
No es curable
Yeah I that installed bigger bulbs that were in the glove compartment lol I’m an idiot
@RBTheMechanic
Жыл бұрын
Ohh darn can’t put wrong bulb
my break lights work during day time... when i turn on head lights then break lights dont work... what is the problem..?
@RBTheMechanic
Жыл бұрын
Start with changing ur bulbs also I need u to make video on this post it let me see what ur talking about
@Suraj318460
Жыл бұрын
@@RBTheMechanic i meant, when i dont use front headlights, at that time break lights work well... and at night time when i switch on the front main lights at that time back lights are ok but when i press the break paddle at that time break lights dont work sir...
@RBTheMechanic
Жыл бұрын
@@Suraj318460 that’s wierddd start with switching bulbs make sure u out on correct bulb
@Suraj318460
Жыл бұрын
Appreciated, thank you so much sir, it works now.. i just changed the bulb... awesome.. thank you😁🙏
@RBTheMechanic
Жыл бұрын
@@Suraj318460 good job
Hey are you in east coast and where
@RBTheMechanic
2 жыл бұрын
Yup bayonne nj
It didn’t work 😩😭😭😭
@RBTheMechanic
Жыл бұрын
What’s going on
@trendtrends7081
Жыл бұрын
@@RBTheMechanic Please I have a question about this. My 2008 chevy malibu break or turning signals would not work. Not the bulb or any of the fuses. So confused on what it could be. No lights come on in back except reverse.
@RBTheMechanic
Жыл бұрын
@@trendtrends7081 use test light to see if it got power and round with lights on u need to use schematic diagram to trace down the issue
4 minutes to give 20 seconds of info. You tell a story like a woman does.
@RBTheMechanic
Жыл бұрын
Thanks
I have a 2011 Jetta, I replaced the bulbs..however the tail lights work when breaking or turning BUT the tail light doesn’t come on at night 🫤
@RBTheMechanic
4 ай бұрын
Replace the bulbs it had dual filament could be bad
The break light on my passenger side won't work even after putting in a new bulb. I tried pushing those metal things inward on the bulb connector and it still doesn't work. The driver side break light works fine. What could I try? I have a 2008 Sentra.
@RBTheMechanic
Жыл бұрын
Ok how many wires in the connector? If it’s 3 wires u have to put dual filiment bulb also new bulb could be defective sway the bulbs from right to left and check fuse also then let me know if it’s still issue.
@CrowdPleeza
Жыл бұрын
@@RBTheMechanic 3 wires for that bulb connector. I tested the bulb socket with a multimeter. Having someone pressing the brakes I got needle movement with the OHM setting. No needle movement with the other settings. So there seems to be a current reaching the bulb socket. Is there something else I can try? The bulbs I tried are the ones given to me at the auto parts store for my car. Can the fuse be the problem even if one brake light isn't working? The other brake lights are working ok.
@RBTheMechanic
Жыл бұрын
@@CrowdPleeza u have to check voltage. Ground should and power should be there when pressure brake test light should come on and if both r there it should work