Ford Escape Brake/tail Light Replacement (2013-2017)
Автокөліктер мен көлік құралдары
HOW TO on replacing the main tail light bulbs- brake light, or turn signal, or the whole housing. In this video I change the brake light bulb.
Vehicle: 2014 Ford Escape Titanium
Comment, like, subscribe and enjoy the video.
#ford
#escape
#howto
#brakelight
#taillights
@EnthusiastCarHangar
Пікірлер: 72
Thank you. I love the way you get straight to the point and you are very detailed on how to get the lighthousing out of the vehicle when compared to other videos I've watched. Great job
@EnthusiastCarHangar
6 ай бұрын
Thank you for your nice words. I appreciate it.
Thank you for the video! I was able to do this myself and it was soooo easy!! One helpful tip , if you just tug on the rubber around the assembly it pops right off
@EnthusiastCarHangar
Жыл бұрын
You are welcome.
@taywiththelongnails
Жыл бұрын
Thank you! So glad I found this video and comment! Spent $12 for fuses and replacement bulbs instead of paying anyone to do it for me.
@KatBiscuits
Жыл бұрын
Omg didn’t even have to watch the vid, this is the comment I needed!!!
Tks for the video. Had hard time getting the light out but after your comments about hitting and pushing i kept trying
@EnthusiastCarHangar
Жыл бұрын
You are welcome. I have a few other Escape videos in my how to playlist. Thank you for watching!
Super helpful! Thanks for taking the time to post this video.
@EnthusiastCarHangar
Жыл бұрын
You are welcome.
Дякую за відео! Продовжуй :)
Thank you for this video, its simple, clear and informative.
@EnthusiastCarHangar
Жыл бұрын
Thank you!
Really helpful thank you so much
Great video thank you
Really clear and helpful!
@EnthusiastCarHangar
Жыл бұрын
Thanks for watching!
Thank You for the video it came in handy
Very helpful! Thank you!
@EnthusiastCarHangar
Жыл бұрын
You're welcome!
Excellent instructions!
@EnthusiastCarHangar
2 жыл бұрын
Glad it was helpful!
Great love the way you explained it super
@EnthusiastCarHangar
Жыл бұрын
I appreciate it. Thanks for watching.
I found a trick for getting the assembly out of the clip in another video. Layer a bunch of long strips of tape along the housing and trailing off behind the car, long enough that you can fold the end over and make a handle. Then you can pull back and a little towards the middle of the car on the tape, instead of having to hit it and/or break your fingernails trying to pull on the assembly.
@EnthusiastCarHangar
Жыл бұрын
Thanks for the idea.
@okcwildcat
Жыл бұрын
Thanks. I was about to use words i should not use!!
@EnthusiastCarHangar
Жыл бұрын
I believe that.
@geronimojr.nelmida7740
Жыл бұрын
⁷⁷⁷⁷⁷⁷7⁷⁷⁷⁷⁸7ò⁷⁷⁷7⁷7⁷777⁷⁸⁷77⁷⁷77⁷⁷7⁷7⁷⁷⁷⁸⁷⁷⁷⁷⁷
@smithale
Жыл бұрын
Just to note, though, an appropriate set of panel pullers will cost about $4 on the rainforest website, so just get some. They are one of those tools that if you use it once you’ve gotten your money’s worth.
Wow THANKS!!! I thought (now 2024) that I’d have to go to a garage or a dealership for my 2013. Hey yours is looking good and next to a Lincoln way to go!!!
@EnthusiastCarHangar
3 ай бұрын
Thanks I am glad the video helped you.
You saved me money today🙏🙏🙏 thank you
@EnthusiastCarHangar
Жыл бұрын
You are welcome.
Mahalo, all instructions work great, that pop pin is a pain, but doable 🤙🏽
@EnthusiastCarHangar
5 ай бұрын
You are welcome! I am glad it worked.
Thanks for showing me how to do this. 😃
@EnthusiastCarHangar
Жыл бұрын
You are welcome!
great 😊 🙏
@EnthusiastCarHangar
Жыл бұрын
Thank you!
TY!!+
thanks man god dam fords very easy
Thanks
@EnthusiastCarHangar
5 ай бұрын
You are welcome!
This video instruction does not work for 2017 Ford Escape with Ford Escape Kuga 2017 Brake Rear Lamps. The multiple LED brake lamps are built into the plastic part in some models so the entire assembly needs replacement because there is not brake light bulb just built in non replaceable LEDs. You can get a knock off part for about $130. Or $260 to replace both sides.
@EnthusiastCarHangar
Жыл бұрын
From what I know we never got the led tail lights that the Kuga had here in the US. Thanks for the observation.
@keithgkirk
Жыл бұрын
@@EnthusiastCarHangar Sure we did because I am in the process of replacing them now for my Ford 2017 Escape.
@YouTuberMe68
Жыл бұрын
@keithgkirk my 2017 escape has a regular lens with bulbs
@keithgkirk
Жыл бұрын
@@KZreadrMe68 Don't know what to say. We bought ours in California and it has the Kuga lights and that is significantly more costly. AARGH!
@YouTuberMe68
Жыл бұрын
@@keithgkirk and California sucks. I won't make it political 🤭
Great video. No merch?
@EnthusiastCarHangar
7 ай бұрын
Thanks for watching. No merch.
Does anyone know what size the screws are?????
I’m still getting a faulty bulb light after replacing?
@vJofsy
Жыл бұрын
On the dash
@EnthusiastCarHangar
Жыл бұрын
Are all the bulbs working? Did you put an led bulb in? If not it may be an electrical fault.
OK, the bulb was changed, and it did light up in the video. HOWEVER, I would highly recommend...... Use the correct tool to remove the plastic screw covers. Always use dielectric compounds when assembling new bulbs in used sockets. Always, always, always test your work before reassembling, especially new bulbs in used sockets. Bro, you got lucky on this one. Do not ever rely on luck when you do something for another person. Just sayin yo!
@EnthusiastCarHangar
Жыл бұрын
While I agree with you I have to say most people do not have any correct tools at home to remove the plastic covers. The bulbs got tested before reassembly but not every detail is in the video. Just giving a basic idea on how to replace them since it’s important if you ever have to. Thanks for your input.
@mandisamurray5536
11 ай бұрын
Can you Explain this like I’m 5?
I wished you showed how you took off the lights from car , how you took off and replaced the bulb. You didn't show that
@EnthusiastCarHangar
11 ай бұрын
I am sorry. I will think about it next time.
i did change the bulb but still the lights not on.
@EnthusiastCarHangar
Жыл бұрын
That is strange.
To much shit for a back light