Okay for the keyboard tech's out there here's the removal video ;) : kzread.infoMDyoQ0v7fhk

great detailed video, gave me all the info I needed to know, thanks👍

Could of definitely benefitted with a tutorial on how to remove the actuals bearings

Sorry, but why wouldn’t you show how to remove the barrings? It sure would make this video more valuable

@teamvergs1324

Ай бұрын

Exactly 😅

Helpful video, about to to do mine. I'm looking at getting an over axle tool though

Great video, very helpful. Thanks 👍

it's easier to get the pawl's and springs out if you use a magnet.

I'm using a Bontrager Aura 5 wheelset, will it be compatible?

Any advice from you, need to convert my bontrager affinity hub from 142mm to 135mm length😢

Good demo. I would have put a little never seize on the outers

@JustFrana

2 жыл бұрын

i did put a tiny film of slick honey on the o rings that sit inside the end caps after cleaning them , just forgot to mention

Thanks bro

cheers mate. helped me out. do they make a tool to fit over the axle to help press?

@JustFrana

Жыл бұрын

they do , my kit didn't come with one. But I added it on at a later stage

@thecyclingsoldier6732

Жыл бұрын

@@JustFrana do you know the name of the part so i can order?

Do you grease the outside (ID) of the bearings before you press them in?

@JustFrana

2 жыл бұрын

Yes I lightly grease the whole thing before pressing it in , just enough to basically make it sticky

Nice video! Please coud you say to me what kind of bearings are mounted in Rapid Drive 108?

@JustFrana

Жыл бұрын

Im just going off memory but i think its 6903 in hub shell and 6803 in freebody but will confirm on Friday

@JoViVa78

Жыл бұрын

@@JustFrana thank you, 6903 in hub is sure😉

Had to remove the hub bearings witha hammer and punch gently, how would you reccomend

@JustFrana

2 жыл бұрын

for the hub shell i use a bling bearing puller and for the freehub i use a punch and hammer

Mine dose not pull out like that

My end cap and body are really tight on there, no way i can just pull them off. Any tips on how to get them moving?

@JustFrana

2 жыл бұрын

For very stuck ones I have a tool called hub genie , google it and you might be able to use a blind bearing collet in the same way otherwise wrap the end cap with leather , put the axle through the wheel and then clamp the end cap en A bench vice and pull the whole wheel straight up.

@dannyvv75

2 жыл бұрын

@@JustFrana thanks but it's not going a mm. The cap is not moving so the free hub is still on to. I'm afraid to damage more then nesassery if i continue here. I'm going to take the wheel to my local shop to have the stupid cap removed. Thnx

@mikeriley1475

2 жыл бұрын

@@dannyvv75 I had this problem too. The o-ring gets stuck on the shaft, try putting some wd-40 inside the cap then give it a good yank. The hub genie works awesome, but without one, you can still get it off with a little effort. Worst case is you'll need to replace the cap, which is about 9 bucks.

@dannyvv75

2 жыл бұрын

@@mikeriley1475 it's off,thanks. But it took serious effort, no way it will come off like some video's show just pulling with bare hands.

@mikeriley1475

2 жыл бұрын

@@dannyvv75 So did mine. I had to use my driver as a slide hammer to get it off (take that bearings), pawls went everywhere. I put a little grease on the o-ring for the re-install, then took it back off again to check and it came apart much easier the second time.

Can you remove the axle tube without removing the bearings?

@JustFrana

Жыл бұрын

no , one side will have to come out

@stellaprs

Жыл бұрын

@@JustFrana brilliant, thanks 👍

i can remove the freehub body without removing the cassette, is it normal?

@JustFrana

3 ай бұрын

Yes , when the hub cap is really stuck i use the cassette as handle to pull the cassette towards me with hands on either side

Are you saying there that all free hubs take the same bearings?

@JustFrana

10 ай бұрын

All BONTRAGER Rapid drive freehubs take the same bearings ( size and amount) Freehubs grok other manufacturers will obviously differ

How do you just pull off the free hub body?? I tried for several minutes and mine didn’t come off

@JustFrana

9 ай бұрын

If its brand new they're very difficult, but its just the cap. Once the black cap is off its very easy. If the hub cap is already removed then just check that it is definitely a 108 rapid drive freehub

@raypinney4944

9 ай бұрын

@@JustFrana the cap is still on, I also can't get it off, hub has 1000 miles on it

@mariuspetitvidal342

6 ай бұрын

Try using a blind bearing puller

Super and the remove of the old bearings you shown not!

@JustFrana

Жыл бұрын

kzread.infoMDyoQ0v7fhk?feature=share

@JustFrana

Жыл бұрын

have a look there

@deepfish4432

Жыл бұрын

@@JustFrana thanks!

What size are the bearings? I need to change mine. Thanks 👍🏻

@JustFrana

3 ай бұрын

6903 for hubshell , 6803 for freebody

@matthewwhitney6787

3 ай бұрын

Thank you 😁

Today I’m going to show you a tutorial.. but nahh I expect you to know this by now.

@JustFrana

Жыл бұрын

kzread.infoMDyoQ0v7fhk?feature=share since its so hard ...

The title stats "rear hub bearing removal"

@JustFrana

Жыл бұрын

States* not stats. And it actually says " ...rear hub bearing replacement"

are you saying prawl?

@JustFrana

2 жыл бұрын

Yes , I have a hard time just saying pawl

Yah again why didn't you show bearing removal the whole process of this ! Would've made a better video !

Pralls????!! 😂

@JustFrana

Жыл бұрын

Yup I've said it wrong all my life and probably won't say it right anytime soon

'Pawls

@muddymaker3721

2 жыл бұрын

Prawns

@seanshaw8321

Жыл бұрын

@@muddymaker3721 😂