Bomb going off in 4L60 core. Watch till the end.

Автокөліктер мен көлік құралдары

Never know what you're getting in a core. Watch till the end.

Пікірлер: 187

  • @BAJARACER43X
    @BAJARACER43X6 ай бұрын

    Thanks to Richard and what I've learned from his channel I finally passed my ASE transmission test

  • @kimdearrington258

    @kimdearrington258

    6 ай бұрын

    Congratulations, the ASE tests are not easy!

  • @simonmcneilly55
    @simonmcneilly555 ай бұрын

    One of the happiest days of my life was to see you back on KZread…..🎉 god bless y’all

  • @blackericdenice
    @blackericdenice6 ай бұрын

    I taught myself how to rebuild a 4L60e in my 96 Tahoe 12 years ago. KZread was the main reason. I watched every video on here. I bought 3 books and read them front to back. At the end, I learn to just rebuild the unit back the way it came from GM. The transmission worked on the first try. I did have have a front seal leak. I later found out it came from not lining the pump up right. I also had a 2-3 shift flair. That was because the parts guy sold me a 4 cylinder spacer plate. After drilling out the 3rd gear supply hole. The slip was gone.

  • @gcrauwels941
    @gcrauwels9416 ай бұрын

    Richard: 'I think we've got enough clearance in our 3-4 clutch.' Teresa laughs from experience. 😂

  • @johnnypk1963
    @johnnypk19635 ай бұрын

    Every city small and large needs a shop just like this. Richard is the man

  • @BourbonBoy
    @BourbonBoy6 ай бұрын

    Wow, didn't know you started a new channel. So glad I found it. Love the videos.

  • @mfree80286
    @mfree802866 ай бұрын

    Always know it's going to be a good show when Richard gets past the pump and the transmission is making tinkling noises like a broken christmas ornament in a box...

  • @tristanrempel9662
    @tristanrempel96626 ай бұрын

    Good to finally find your new channel! I used to always wonder what happened to you guys. Been about a year but it's great to be back!

  • @jamesmedina2062
    @jamesmedina20626 ай бұрын

    Youre like my old pops Richard. When you get good at something it gives you a jolt of energy to wrestle it and get it done. Came off the farm in Olton Texas and did water law for the farmers out here. Over 60 years a lawyer!

  • @courier11sec
    @courier11sec6 ай бұрын

    Your familiarity with these transmissions is always so impressive.

  • @tominthebox
    @tominthebox6 ай бұрын

    I missed you so much. I am glad I found you, and you are back on YT. Much love from Montreal.

  • @richardteresacricheducatio3542

    @richardteresacricheducatio3542

    6 ай бұрын

    We are excited that you found us too. Thank you for your support.

  • @HueToobBlows
    @HueToobBlows6 ай бұрын

    Thank you all again for another great video. Always a pleasure to watch. Glad your shoulder is doing well and you've gotten your strength back. Be well.

  • @JesseBertrand-op4sl
    @JesseBertrand-op4sl5 ай бұрын

    Glad your back- I want to thank you for your knowledge you are sharing with us- you help me tackle my 4L80e in my 1992 Chevy truck-something I would never tackled with out your video’s-thanks again

  • @hudsonvalleyrailandriverandair
    @hudsonvalleyrailandriverandair5 ай бұрын

    I live near LEE MASSACHUSETTS where ONYX PAPER IS LOCATED, ONYX PAPER makes the clutch paper material that is used in the application of automatic transmission clutch plates. The paper is also used in many clutch assembly that require clutch type operations

  • @keysautorepair6038
    @keysautorepair60386 ай бұрын

    This guy knows his stuff ask me how I know he helped me out when I was having trouble with my transmission and no one else had any clue what was wrong with it.

  • @markbrandon7756
    @markbrandon77566 ай бұрын

    Just to watch one video here CAN CHANGE MY DAY ... Always Positive and Always Technical and Always Humble and Down to Earth, talking NORMAL just as if (YOU) and Richard at the bench.!!! Thanks for ALL the great videos over the years.. What is Never / NOT On This Site ......UNLIKE Some people with good skills make up for lack of experience Drinking Monster and talk like a chainsaw and exaggerate every meaningless point ..

  • @user-oo4sw9mk1p
    @user-oo4sw9mk1p5 ай бұрын

    Found your channel, you are the man that knows your stuff. Thanks for the in-depth takedown.

  • @scotttimpany2845
    @scotttimpany28455 ай бұрын

    Wore plum out! Glad you're back Richard!

  • @richardteresacricheducatio3542

    @richardteresacricheducatio3542

    5 ай бұрын

    Thank you were excited to be back

  • @Fiendclub
    @Fiendclub5 ай бұрын

    I really really enjoy your videos an I want to thank you personally. Not a lot of your videos have comments. I watched every video on the 4l60e for my 95 Buick roadmaster wagon. 95 is a one year set up! I’m a mechanic not a tranny guy! I machined my own compresses for the spring packs. Your a master of your craft an you also helped me with a power glide I did. Thank you 🙏

  • @Timbo428CJ
    @Timbo428CJ6 ай бұрын

    Richard, I've said this before. You're amazing on how you remember everything!

  • @fuse8052
    @fuse80526 ай бұрын

    Richard , you're great. I've learned SO much from you. Thank you

  • @TT-qo9dv
    @TT-qo9dv6 ай бұрын

    Thanks for the video! I enjoy your channel 😊

  • @jay3368
    @jay33686 ай бұрын

    I FOUND HIM! haha great to know you are posting again.

  • @thefirstcalled
    @thefirstcalled6 ай бұрын

    Thank you for sharing your love of automatic transmission repair!!!

  • @mikepickett3277
    @mikepickett32776 ай бұрын

    Great video you two, makes my day every time I watch. Keep it up!!!

  • @lanbrick5826
    @lanbrick58266 ай бұрын

    Another great video! I’m hooked!

  • @metrickarma
    @metrickarma3 ай бұрын

    The knowledge is unreal, thanks for sharing you guys!!!

  • @jensenwilliam5434
    @jensenwilliam54346 ай бұрын

    Glad to see you back!!!

  • @dannyhawkins7229
    @dannyhawkins72295 ай бұрын

    So glad you are back!

  • @ManleyMachines
    @ManleyMachines5 ай бұрын

    YESSSSS!!!!!! I was missing this content and Richard! Seeing you back on youtube made my day!

  • @nobodyimportant8833
    @nobodyimportant88335 ай бұрын

    Holy moly! You’re back!

  • @BigMike-dm4oy
    @BigMike-dm4oy6 ай бұрын

    so excited to see you guys back

  • @kricketscreations4887
    @kricketscreations48876 ай бұрын

    Glad to see you back there Richard

  • @victorbellan8357
    @victorbellan83576 ай бұрын

    Pleasure to watch you work and pass on information! You have a lot stored in your grey matter!

  • @dannysmith1445
    @dannysmith14455 ай бұрын

    Its good to see you back ! I've missed seeing your videos Richard. I subscribed

  • @ricardojuarez291
    @ricardojuarez2916 ай бұрын

    I'm really glad to hear from you guys.. i really love how Richard works, here I'am supporting you guys. Really happy to see you again Richard

  • @petes7796
    @petes77965 ай бұрын

    Hey Richard and Teresa, great to see you guys back. I just subscribed been a while. Love your videos.😊

  • @madguy1010
    @madguy10106 ай бұрын

    So glad to see you back to doing transmissions and other things! Last I seen you and Trent had a falling out and you just had surgery! Glad to see you back in the habbit!

  • @jasonandazola2233
    @jasonandazola22336 ай бұрын

    Hi Richard & Teresa I was following yall on yalls old videos I have been looking for yall. I have a 09 GMC Sierra I was wanting the transmission rebuild by yall it lost reverse thank yall for the videos

  • @madebycinematically
    @madebycinematically5 ай бұрын

    Glad I have found you on this channel!! miss the precision channel!

  • @marshallsayre58
    @marshallsayre586 ай бұрын

    Hi Richard, thnk you for your knowledge. I hvnt learned too much but I appreciate your knowledge&explanation for how it works in detail. Be safe

  • @12345.......
    @12345.......6 ай бұрын

    Richard is on point today. Very entertaining

  • @user-kh2yl6nn3l
    @user-kh2yl6nn3l6 ай бұрын

    Yep, I thought there was going to be some serious carnage around that rear planetary . Good video guys . :)

  • @chadadececco
    @chadadececco6 ай бұрын

    Nice to see you guys "back at us"! Missed you!

  • @owenhobgood836
    @owenhobgood8366 ай бұрын

    perfect timing on the video just had the rear planet on my 4l60 go boom. Interested in the part number for the pressure switch! Thanks for a great video

  • @jeepjunky691
    @jeepjunky6915 ай бұрын

    Hey Richard, I’m so glad you guys are back on KZread I missed you… I hope 2024 is awesome for you guys

  • @340duster8
    @340duster86 ай бұрын

    Have not watched the video yet but I am sure it is another great informative one.

  • @anythinggoesgarage5943
    @anythinggoesgarage59436 ай бұрын

    that was a real blown up one! Great video as usual!

  • @davidanderson2393
    @davidanderson23936 ай бұрын

    I really enjoy your videos, very informative , even for this old guy, on the down hill slide to 70 and still like working on my own gear boxes, differentials and engines. Keep up the good work you guys and good luck.

  • @richardteresacricheducatio3542

    @richardteresacricheducatio3542

    6 ай бұрын

    It definitely never gets old. This is Richard. Have a great day.

  • @UnionBMXCO
    @UnionBMXCO6 ай бұрын

    Glad to have you back.

  • @FanaticalRK
    @FanaticalRK6 ай бұрын

    i found him again finally!

  • @adamboylan2307
    @adamboylan23075 ай бұрын

    I had a ‘91 gmc sierra. It had the 4L60. And after that tranny went, the very first one i came across was the right one. Guess i got lucky there. From what you’re saying, there wasn’t all that many around.

  • @davidwoods8982
    @davidwoods89825 ай бұрын

    I’m glad I found your new site. I’d like to find out what you did to a 727 transmission and put a 48RE front drum in it. I would like to know how you did that. Great videos. I’ve never seen anyone knock a transmission apart so fast and be as knowledgeable as you are! I hope you read comments and will reach out to me about the drum swap. Thank you either way because you have opened my eyes about automatic transmissions. As a toolmaker for over 50 years, you make great sense!! God bless you and Theresa!

  • @xr7coug
    @xr7coug6 ай бұрын

    Nice one! Bummer that you didnt get a lot of parts but looks like you got what you needed

  • @johngrein3325
    @johngrein33255 ай бұрын

    Great Video! Thanks.

  • @peteaplin8324
    @peteaplin83246 ай бұрын

    Dang...i wondered where you went R&T! Happy New Year!

  • @shaunolinger964
    @shaunolinger9645 ай бұрын

    Hiya buddy!!!! I missed you, and I didn't know where you'd gone! I am SO GLAD to find you again!!!

  • @wvjeepguy8178
    @wvjeepguy81786 ай бұрын

    Man, these 4l60 just go out left and right.

  • @gsaegerjr
    @gsaegerjr6 ай бұрын

    every time I watch one of your video's I'm amazed at how much you know about that transmission and just wanted to know how you keep it all straight, so you don't mix it up with another transmission.

  • @gillboardman8998
    @gillboardman89986 ай бұрын

    Good morning from frigid Eastern Washington. 😎👍Top 'o the day to you.

  • @richardcreel6282
    @richardcreel62826 ай бұрын

    Ms T is good, she was seeing bad parts before R, have watched a few of her vids when R was laid up, very capable. What a team.

  • @jeffgordon9103
    @jeffgordon91036 ай бұрын

    Its been awhile. Good vid

  • @alwhitesell4023
    @alwhitesell40236 ай бұрын

    I like the camera angle , when you are working on that bench.

  • @alanluber8842
    @alanluber88425 ай бұрын

    YOU SHOULD OF BEEN A TEACHER YOUR U TUBES ARE SO. INTERESTING AND EDUCATIONAL. I WATCH ALL OF THEM. KEEP UP THE GOOD WORK

  • @Killertomato84
    @Killertomato846 ай бұрын

    needa weld you a support brace to the middle of that table so it won't bounce as much, put a screw in adjustable foot to keep it nice and firm.

  • @southshoreimaging3459
    @southshoreimaging34596 ай бұрын

    good video, I used to fix these back in the 90s

  • @CatHound
    @CatHound6 ай бұрын

    Great job!

  • @cwk1981
    @cwk19815 ай бұрын

    i would honestly drive across the country to have richard build and install a transmission for me

  • @drdab_
    @drdab_5 ай бұрын

    sure wish yall would show us how to put em together tearing apart we all can do thanks for what yall do very informative

  • @jeffcharboneau3514
    @jeffcharboneau35146 ай бұрын

    Love your video's

  • @groosbro1
    @groosbro14 ай бұрын

    Somewhere in Germany is an engineer in a lab coat fainting watching Richard slamming the trans against the wall and table. 😅

  • @ronwade5646
    @ronwade56466 ай бұрын

    '97 Cherokee AW/4 Auto original at 340,000 miles when I sold it still running fime. Serviced every 2 years

  • @keithadkins8734
    @keithadkins87345 ай бұрын

    Love your show off for a while, and I was very sad

  • @richardteresacricheducatio3542

    @richardteresacricheducatio3542

    5 ай бұрын

    We are excited that you found us. We are excited to be back.

  • @bobbysanders6231
    @bobbysanders62316 ай бұрын

    I enjoyed the video guys, u were speaking of cores,in my home town has a junk yard and I see a lot of transmission in it last time I was in there.. I know them well... just saying..

  • @viktoriamattsson7172
    @viktoriamattsson71726 ай бұрын

    Me too, this is so interesting 👍🇸🇪

  • @jedclampett6466
    @jedclampett64666 ай бұрын

    This is the unit that I run in my '71 F250 highboy. Yes you read my comment correct.

  • @12345.......
    @12345.......6 ай бұрын

    A transmission costs as much as an engine, yet people fail to maintain them. I don't understand

  • @davejames2015

    @davejames2015

    6 ай бұрын

    Lol a 4l60e will just decide to break a sun gear. It's china junk in everything chevy

  • @brhyno9752

    @brhyno9752

    6 ай бұрын

    Some are not really serviceable so there’s that.

  • @1898nc2

    @1898nc2

    6 ай бұрын

    To most people a car is a thing that takes you places you put gas in and the magic little gremlins turn gas in to forward motion. I have a guy at work who has bricked two brand new engines since I have known him. He drives a car till it seizes and gets a new one. Never changes the oil.

  • @ericd7532

    @ericd7532

    6 ай бұрын

    People don't give a crap..a vehicle is just a big ass coffee maker. When it breaks you walk away and grab a new one.

  • @beekeeper8474

    @beekeeper8474

    6 ай бұрын

    Hey I need my Tahoe how do I get the transmission God do it? It's a Texas truck so it should get it done in Texas lol

  • @ChrisR
    @ChrisR6 ай бұрын

    That planetary set must have sounded absolutely grate in the vehicle.

  • @robertwest3093
    @robertwest30936 ай бұрын

    I've rebuilt everything on a car except an automatic transmission. Installing a B&M shift kit is as far as I've trusted myself with those. I envy people like Richard who can go through any automatic transmission without hesitation. Subscribed!

  • @patrick_kyker
    @patrick_kyker6 ай бұрын

    I never thought about it but the way it's spinning like he said it throws all the oil off of it if there isn't a constant supply and makes it go dry instantly.

  • @alexvillafranco9030
    @alexvillafranco90306 ай бұрын

    I love these damb videos how can I go work under y’all to get the knowledge

  • @Absaalookemensch
    @Absaalookemensch6 ай бұрын

    If Richard & Teresa were my parents, I would have gone into the family business and not gone into nursing. I'm retired, so it's too late to go back now.

  • @jeremymardlin5381
    @jeremymardlin53816 ай бұрын

    Boy that looks like the 4l60e I pulled out of my 2005 Trailblazer. I pulled the pan and saw pieces of the rear planetary and instantly bought another core.

  • @resistorstudios
    @resistorstudios6 ай бұрын

    Thats one o the good ones. Gm was really figurin out them 700r4s towards the end there until they slapped solenoids in em.

  • @WinnfieldCustoms
    @WinnfieldCustoms6 ай бұрын

    I bought a 91 c1500 chev 350 engine for $500 a long time ago and it had this same transmission. No third or 4th gear. I remember being so proud after downloading the ASTG rebuild manual, cleaning everything up and rebuilding that puppy and having it work. still have the truck today. love all the tips and tricks from Richard's videos. his videos are a blessing to all of us. I am going to put a power switch in line to control my lockup, it likes to shift lockup at 35 at light throttle and its annoying sometimes. not sure what else to do or modify to fix that? anyone have input? cheers!

  • @patrickfahring6086
    @patrickfahring60866 ай бұрын

    How is your drag car doing these day's. Love your videos.

  • @rainmakr9
    @rainmakr95 ай бұрын

    Rich is back!!!

  • @lsswappedcessna
    @lsswappedcessna5 ай бұрын

    when the normally red/pink transmission fluid is so dirty and burnt that looks like motor oil, you know there's gonna be some calamity.

  • @kimdearrington258
    @kimdearrington2586 ай бұрын

    I really appreciate you Richard, and I live in Huntersville NC, just outside Charlotte, and I am looking for a dependable transmission for my Buick 455 engine, and I would like to have an overdrive transmission for it, but I just don't know who i can trust to buy a dependable performance transmission, because the engine will be around 450 horsepower if everything goes right, and wanted to see if you could recommend someone in my area that is dependable and I can trust to know what they are doing like you do? I used to overhaul Transmissions in the late 70s and early 80s, but it has been so long that I don't trust my memory to building a performance tranny, and even though I used to modify turbo 400's and they were bullet proof for the times, but I am looking for a 200 overdrive, as long as i can get the TV cable and bracket for it to operate properly, or a 4L80E that has a stand alone computer controller and a BOP case for it to work with my engine. Can you recommend someone out here, or could you build one for me at a reasonable price that you could ship to me??

  • @billmonroe8826
    @billmonroe88266 ай бұрын

    Haven't been around for awhile so Happy New Year, kids!

  • @StumpyVanLife
    @StumpyVanLife6 ай бұрын

    "Go Cowboys" well..... that did not age well. Lol

  • @marshallsayre58
    @marshallsayre586 ай бұрын

    Richard, could u show us from start to finish takng it apart, showing us what's wrong, cleaning it explain what you see&needs replaced, putting it all back together, installation? I knw its alot but you can have othr members of your team do it too. Thnks again for your knwldge

  • @joeydrumstix
    @joeydrumstix6 ай бұрын

    Hey yall is precision transmissions open for business? Google says yall are temporarily closed. I just found the new KZread channel. Been watching old precision transmissions videos on the other channel. Hoping for some new content so I'm glad I found this channel!! I'm glad to see you all are doing well!

  • @2nickles647

    @2nickles647

    6 ай бұрын

    No it's closed. Richard has moved his business to his home I believe.

  • @samaxe6495
    @samaxe64955 ай бұрын

    After seeing all the 4L60 problems, I’m almost paranoid about my 4L75.

  • @frogy420
    @frogy4206 ай бұрын

    Always remember the check balls

  • @josemendez-wu1nj
    @josemendez-wu1nj5 ай бұрын

    Hay man I was wondering since you always be doing those videos of these can you post a parts list on a 4l60e and the reassembly of the parts as well

  • @0dbm
    @0dbm6 ай бұрын

  • @noneblank6170
    @noneblank61706 ай бұрын

    Hello Richard, I'm curious do you work on the Ford 6r80 transmissions as well? Would love to see you teardown one of those

  • @leesanders8824
    @leesanders88246 ай бұрын

    Hey Richard. Been watching for a while. Started with the old channel. I know you're a busy man but I had a couple questions if you could answer them and if not that's fine. What does a 4L60e rebuild cost... something that you would build for towing.

  • @tocsa120ls
    @tocsa120ls6 ай бұрын

    You know for not having a hardened shell, it still managed to twist the end of the reaction shaft nearly in half.

Келесі