I got myself the profile mini one month ago. have to say it's just on another level, mine is not fully upgraded but still worth every penny!

All close to each other but still slightly different. I like the sound and look of your Alienation Venus though the best. If it came in Polished, Chrome or even Titanium outer hub I'd buy that in a Heartbeat and put those Titanium aftermarket parts inside like you did! 👍

fly magneto is my fav sounding hub. That alienation hub is a thing of beauty tho. Makes me wanna try out free coasters.

I’ll have my BsD rev nasa complete next week Mike at the wheelmill ordered today I’m hyped bro

I like the sound of my Cinema freecoaster...Silence is golden. 🤣

@Brant_Moore

2 жыл бұрын

Are your brakes silent sir? Hahaha

@cx4130

2 жыл бұрын

@@Brant_Moore Only when I don't pull them. LOL.

@mikeoliver3254

2 жыл бұрын

Yah my mission freecoster is dead silent but my brakes sound like a dying donkey.

I'd like to get that new Shadow cassette hub. Currently I run a Kink Yukon Cassette. Sounds like the ones you demonstrated.

Thx

I love my elite chainsaw, no mistaking it and you hear them coming. The TNT Rapidfire cassette is loud af too and has its own distinct sound, but is more directed to the racing industry.

@Brant_Moore

2 жыл бұрын

Chainsaw, beesnest, the elite goes by many names with one unmistakable sound! haha

Love the new vids

I could hear the Venus while you were still cranking on the other 2.

My revolution hub sounds really quiet but it is brand new some I’m hoping after use bit of dust gets in it gets louder lol

I don't know what it is about that sound but I need a loud hub. My boys The Scott's at Brand cycle n.y got me the profile a.c.2 hub. Sick loud

Is this a surfing channel now? Thats a lot of waves!

This would be cool in an anechoic chamber.

Consider tone of the hubs. Deeper tones/pitches travel better and get drowned out less easily. I think the freenight and the venus are equally as loud but the venus sounds deeper in pitch.

Profile Mini my fav!

Freenight sounds the best. Damn wish they still made the og. Need to see how the colony one sounds between the bsd for weenie build. Venus is the only one that can go on my normal build. No polished for the other options.

Do a comparison with the profile elite, fly magneto and eclat seismic?!

The Colony Wasp hubs are loud probably as loud as the Elite hubs or louder. 👍👍🇦🇺

I’m gonna need to get used to the click sound again damn...

They all sound almost the same lol😂

Profile for life.😎😁👌🙏✌️

BSD's sounded the quieter to me... just a little bit less than the others. And the elite is obviously the loudest. But among the freecoasters, Alienation wins (the loudest)

I've had my BSD revolution wheel for over a year now and it's still pretty quiet. Have you degreased yours? Mine hasn't been touched internally.

@Brant_Moore

2 жыл бұрын

They come with no grease in them. Obviously from previous videos I’ve had my apart but I haven’t done anything internally either. The only thing I ever did was tighten the drive side jam nut pretty tight

@nightriderbmxshop6768

2 жыл бұрын

Changing to a new O-ring might make it louder

@KeithBridges

2 жыл бұрын

Not fussed about the noise being quiet to be honest. Just curious.i came from a profile mini so I'm enjoying the the stealth mode of the BSD.

@Cheesicle_

7 ай бұрын

@@nightriderbmxshop6768how will the oring make it louder? dont you want the new oring to make no noise/squeack?

@nightriderbmxshop6768

7 ай бұрын

@@Cheesicle_ it's a fine balance of the force

Since it is impossible to get the Venus have you thought about trying to get Alienation to give you one for a giveaway? If you ran it for a month of two it might even bring in more subs to your awesome channel.

They all sound pretty loud but I think my supercross hub is way louder 😎

Should add a Magneto or Seismic into the mix

My Alienation is quiet. Just a faint buzz.

My tall order drone cassette BUZZs so much louder than all these (including my mini as well)

@shaynenichols8343

Жыл бұрын

It’s not quite as loud as his elite but it’s damn near aboht the same..

I'd say the venus is the loudest (minus the elite) but I'm not sure why my revolution seems so much quieter than yours? Lol

@Brant_Moore

2 жыл бұрын

That’s crazy because I thought mine was quieter than I remembered when filming this

@nightriderbmxshop6768

2 жыл бұрын

If you clean up the extra oil from the inside it might be louder

I hate the sound of cassette hubs. I didn't know that the sound was an "in" thing. I prefer my silent Geisha lite.

Fly Magneto and Eclat Seismic are loud. Not as bee like as Elite though.

Seriously my bsd swerve hub sounds as loud as that elite!!! Like seriously

The profile mini has four paws the rest have 3 paws

There is virtually no sound difference in any including the mini because they all run similar pawl drive mechanisms. Lube amount may cause any noticeable differences. I have KHE type freecoasters (silent), Profile Elite, Primo V3 cassette and a Madera cassette (same as a mini). More pawls make more noise. Tooth ring design and pitch makes differences. I believe the Elite has offset pawls (ever so slightly) giving it twice the sound and engagement over even pawl spacing. If you spin my elite driver very slow you can sometimes hear a single click. Then a double click. Anyhow I’m about to buy a BSD planetary to try out. Anymore…i like silent. I like hearing my tires grip the surface…or not grip. My Elite can get on your nerves after a while.

@NeilLB7

Жыл бұрын

I will add my Primo Remix V3 is very very buzzy and loud. Much like the Profile Elite. And has very minimal take up. The Elite has basically zero take up.

My Stolen Rampage rear wheel is loud af and a cheap price..... js

The louder it is the more friction is being caused. Not exactly what everyone wants.

@Brant_Moore

2 жыл бұрын

That’s why I did a video like this one. Everyone needs/wants something different for sure and hopefully this video helps them choose easier

@nightriderbmxshop6768

2 жыл бұрын

Correct, and consider also the pawl's hight travel for each click

@nightriderbmxshop6768

2 жыл бұрын

Is this freenight using the 3D print clutch or the new one?

@Brant_Moore

2 жыл бұрын

This is the very first one you ever sent with no changes other than the ti axle

@joelodyssey4475

2 жыл бұрын

Absolutely, especially in freestyle where you don't really need very much speed. I run an elite and my wheel doesn't spin on its own very long when you crank it up, but it sure is loud and the engagement can't be beat. Thanks for the kind reply to my smug comment :)

One that compares is the Eclat Seismic