Click here to buy the newer HIGH POWER spark plugs seen in my video amzn.to/2WJ7duq

@kiloohm

5 жыл бұрын

that part number brings up the old version

@BMWDoctor

5 жыл бұрын

No man it’s not it was changed go into dealer the part number was changed order that part no and watch they will send you high power ones

@bastian9653

5 жыл бұрын

Yes me too part no 12122158253 show one pot spark plug...

@wallycunningham5090

4 жыл бұрын

Well shit I just replaced mine ~500 miles ago. Wish I would have found your videos 6 months ago

@BMWDoctor

4 жыл бұрын

Haha mate that’s what happens mate when you get SOOOO many idiots giving wrong info and don’t know shit as there all just a bunch of DIYERS none of them know dealers or have ever worked In one that’s why I tell people don’t follow any of these people as they know jack shit

Hey man thanks for these videos. I had an E89 with the N54 engine and thought it was a maintenance nightmare because I had no idea that normal people could replace things like ignition coils and fuel injectors. Now I am buying another E89 with the N52 engine and I feel confident I can work on it myself and save a ton of money. Really appreciate your work.

Hello Dean does this plugs 12122158253 fits in the old n52b25 engine from 2005.I recently noticed after changing the old sparks with ngk laser iridium now the car rough idle and shakes on cold starts solenoids are oem new both disa flap oem new too both o2 sensors and maf sensor new.I changed the ignition coils with 6 new delphi.Just to note when the weather is cold around 0 degrees and colder iddling # shaking is not coming on cold starts.Do i have to change old laser plugs (they are only on 4000km) with theese if they fit cuz it writes they fit only in 2009 models or its no problem.Or i should search for the problem otherwise

Thanks for the DIY on the correct spark plugs.!! Another one💪🏾💪🏾💪🏾👍🏾

Hello bmw doctor . do you have a part time for the spark plugs your using or a link if possible ?.. my car started to misfire i thought i give it a service .. spark plugs coil pack which brand do you recommend

Can you remove the plastic engine cover without taking off all the plastic and cabin air filter above it? On my old E60 i had the M64 engine and if i needed to change a coil i could remove the cover without removing any plastics above it. It was so easy but now i have a n52 e60 and was wondering if its the same and maybe i could squeeze that cover out without the hassle of of taking plastics off. Thanks

Where did you get that handly little tool on the end of the impact gun mate another top vid with top tips deano 👍

Did the new spark plugs solve the problem. I’m trying to burn Oil of mushroom or we’ll lose power plug taken a problem I have put 1000 miles on it haven’t checked them again

Hey Doc. I have a 06 530xi. N52 in the USA. Are we good to use the 4 prong NKG plugs??? Are the pre gapped? Thanks for the great vids

@greenman7612

Жыл бұрын

No gap adjustment needed.

HI DOC what kind of spark plugs do i use on my 2008 BMW 328i automatic N%@ I believe...GAP? I have BMW plugs in there now. PLEASE RESPOND thanks can u comment on vanos update?

Thank for the videos There great 👍 Do you have a part number for the 4 prong plugs? As everywhere i look with my number plate search it gives me the single prong ngk plug. Thank Dean

I have a early production E90 330i and replaced my spark plugs at 60K with the original NGK ILZFR6D11 and all the ignition coils with the updated ones(original ones not available). The reason I did not replace spark plugs with updated ones is because the car with running great. They were also in good shape (no oil, burned tips). I have also been changing the oil every 5K miles (or 6 months) and cleaning/swapping the vanos solenoids every 30K miles. I am at 105k miles now and the engines runs perfect other than the recent increase in oil consumption. I found lots of oil in upper DISA valve. The CCV is my next project. To my knowledge the car has never had a software update. Will replacing the spark plugs and vanos solenoids with the updated versions cause problems? Thanks

@BMWDoctor

5 жыл бұрын

No problem just make sure you buy genuine bmw solenoids and STOP cleaning them it doesn’t work the videos you see on KZread was all a LIE no truth in any of that if you update you must use BMW one I’m telling you now you go and use cheap ones your car will be destroyed and run like crap immediately

@bigmoosem5237

5 жыл бұрын

@@BMWDoctor Thanks. Never had any problems with the solenoids-only cleaned them as preventive maintenance. I think clean oil (frequent oil changes) is key to the longevity of the solenoids. When it comes to BMWs, I am a firm believer in preventive maintenance. Never had any common N52 issues: water pump, spark plugs, eccentric sensor, ignition coils..etc..took care of all these before they became an issue. . Runs like a champ at 105k miles and everything works. Drive it spirited everyday. Thanks for all the great videos. Your channel is a gold mine for a BMW DIYer.

@BMWDoctor

5 жыл бұрын

Yep it sure is mate and I have a lot more ready for release you just wait

@maddoxohlson2528

Жыл бұрын

Hey bro just changed my spark plugs and it’s missing what’s the cause?

What should my gap be for a normal spark plug for my 07’ 5 series?

Hello dean, can you use copper spark plugs on a 2010 n52 egine? Thanks in advance!

What do you think the best plugs would be for N62 545i

Hey bro will this work on a 2008 523I? Tried to get some Bosch 4 electrodes but they were actually some smaller plugs which didn't fit.

Have seen lots of 3 tip NGK plugs being used? Is the 4’s better?

I have a N52B30 engine from 2004. It is compatible with your spark plug 4 polos?

My personal recommendations for replacement plugs for bimmers are Bosch. If older M20, 30 etc... Bosch Platinum 2 plugs. Newer, m50, 52, 52tu, m54 etc... Bosch Platinum 4. If it came with (older) copper plugs, step up to platinums. If it came with platinum, Irredium step up is ok or good as long as electrodes are set up the same. Bosch for BMW my 1st choice.

good quick video

Great video. Cheers mate

@BMWDoctor

5 жыл бұрын

You watched that a bit quick mate lol

@TheKeenMechanic

5 жыл бұрын

@@BMWDoctorAt work at the moment lol

I've changed my spark plugs recently, qnd the have some oil on the top of It, doesn't seem like It was from the combustion chamber. What might cause it? There were no oil leaks coming from valve cover gasket qnd from the valvetronic seal.

@BMWDoctor

4 жыл бұрын

Usually it leaks via the oil fill hole gasket in the case itself it can leak out of there aswell so be carefull with that are you sure you checked your valvetronic seal as they leak when the oil level gets up to temp and at the top

dose it matter which style i use ? it recommend with 3 electrodes

@BMW Doctor Is it possible to get these plugs in the U.S.?

Hey Dean - Are these new spark plugs the way to go on the 2008 X3 (N52k)?

@BMWDoctor

5 жыл бұрын

if your car is 2008 it should already be fitted with these

@SkipBee

5 жыл бұрын

@@BMWDoctor I'm a new owner of my 08 X3 and the last owner/shop put in the single prog NGK's. When looking up part #12120037607, my X3 (e83) doesn't look compatible. But I trust your advice, so I'm going to give them a go. Thanks, Dean!

@BMWDoctor

5 жыл бұрын

No problem mate take my advise I know I’m correct I been doing this way to long now not to be correct

What plug should I use on my n46b engine platform

I trying to find those spark plugs here in the states?

are theres plugs for all n52 mate i rang up bmw in new zedland they gave me the single electrode spark plug code. its 2006 130i im going to get some four electrode plugs for it thanks

@BMWDoctor

5 жыл бұрын

Tell the dealers to check the newer part number it comes up on there system if they click on the INFORMATION button

Great channel. Wish u had an N54 to wrench on!

Hi, what is the part number for those plugs?

Hi friend, ive got a 530i on lpg should i also buy this plug? is the ngk version ok for me? ngk version BKR6EQUP (3199) ? thanks mate.

@mrboostification

4 жыл бұрын

its the 258 hp version with dual disa

Yo doc what’s the part number on that n52 spark plugs new version, I can’t find it.. just to confirm this is the new spark plugs regardless updated or not for n52 328i 2007

@BMWDoctor

5 жыл бұрын

That is correct mate

What is the torque spec on those plugs? Thanks mate

@greenman7612

Жыл бұрын

23 Nm

The black cap on your engine ...with castrol. Mine is cracked however no leaking

can i have link from where to buy them ? thanks.

Can these be used in a 2007 X5 4.8i ?

Need more light what you're working on and probably a fix camera that focuses on the area may help to improve the content quality.

@BMWDoctor

5 жыл бұрын

I have just had the lighting done as we speak today my garage was having all other lighting put up that’s why

Thank you for the info. Where can i buy them?

@BMWDoctor

5 жыл бұрын

Pinned to my comments

THANK YOU DEAN...ALWAYS HELPFULL....WIILDHEERE

Should I buy this plugs for 2006 E90 325i 2.5L?

@BMWDoctor

4 жыл бұрын

yes you should if its N52 then yes

@manumond6832

4 жыл бұрын

BMW Doctor and for E30 whit an M20 engine?

Would you please send the part number of the NGK spark plugs for N52B30, thanks a lot

@BMWDoctor

5 жыл бұрын

Pinned to comments for everyone

@hatemhassan78hh

5 жыл бұрын

@@BMWDoctor The part number u pinned is not the same u showed in video

@BMWDoctor

5 жыл бұрын

Yes it is if your ordering from amazon NOT bmw if your ordering direct from bmw you need a different part number

@hatemhassan78hh

5 жыл бұрын

I'll order from ngk itself, so kindly send me the proper part number, thanks

@BMWDoctor

5 жыл бұрын

Mate the way your talking is as if I owe you something don’t come up here trying to talk to me like that go find it yourself you pussyhole KMT

Yes Doc another stomping video outlining fundamentals or correct selection of plugs... Yes guys quad prong Irridium tip laser cut NGK!!!!! BMW use 4 prong so we should follow the doc's advice people.

10:10 no ads

@BMWDoctor

4 жыл бұрын

Yeah mate no ads on that side like to keep my outro nice and clean

Sorry. Just seen pinned to your comments.

6:40 seconds. Looks like a little leak to me? Hope not bud

@BMWDoctor

4 жыл бұрын

You are correct there was a leak from oil filter housing gasket until I changed it with genuine one

@1983stu54

4 жыл бұрын

Yeah mate. I’ve just had to have rocker cover gasket changed and nox sensor. I’ve got the 325i 3.0 litre N53 engine. Any more common faults I should be looking for on this model

@plilp

3 жыл бұрын

@@1983stu54 Great engine, I've got the same one in my e91.