No video
BMW F800GT [2014] HOWTO make your GEAR SHIFTER have less PLAY..? EASY..!!!
After many Km / Miles the gear shifter starts to get a lot of play.
Thats SO EASY to solve ! Have a look at my video how easy that is.
ENJOY !
To see more of my BMWF800GT maintenance video's please have a look at my PLAYLIST about this F800.
In time all of the maintenance video's will showing up in this playlist:
• BMW F800GT [2014-] sne...
With this DO IT YOURSELF video you can save a lot of money.
So be sure to watch this WHOLE video, so you don't mis important information.
Motorcycle maintenance made easy By: The Old Mechanic.
THANKS For WATCHING!
Don't forget to SUBSCRIBE, LIKE and SHARE this video with your all your friends on FaceBook.
#BMWF800GT #TheOldMechanic #motorcyclemaintenance
Пікірлер: 20
I just did this on my F800ST. It was missing the metal collar bushing altogether. After putting in both new parts (collar bushing and plastic sleeve) I felt it still had tou much play as the collar nut was slightly longer than the pedal itself was wide, causing about a half mm play. I made a plastic shim with the hole just large enough to clear the collar bushing, but snugging up against the pedal, removing most of the remaining play. Being plastic, it allows the pedal to still move easily and now there's practically no more play, and much securer gear shifts compared to when I bought the bike a month ago. Thanks for posting.
@TheOldMechanic
3 ай бұрын
Well done 👍🏻
I changed also that piece on my BMW F800ST and after a while, let's say about 10.000 kms it started to have the same play again. What I do since then, is to tight up a thin insulating strap around the pedal adjustment screw to avoid the play on the pedal. I know is not the best solution but putting the new busch didn't solve the problem in my case that is why I decided not to renew it again. Thanks for your videos and explanations!
I once lost that bottom nut on my previous F800GT. I don't know how, one day all of a sudden I could no longer gear down, I had to stop and see what was going on. Bought a new nut, a lock nut and it was fine since then... From that day onwards I regularly check the gear shifter before moving and it definitely has quite some play. Thank you for the video sir! Greetings from Spain.
Without knowing I just did a short video about the same thing and I was as pleased with the result as you were…. 😂
@TheOldMechanic
Жыл бұрын
GREAT 👊🏻👍🏻😂
Sehr gut erklärt 👍 , hab sogar ich verstanden 😂
@TheOldMechanic
2 жыл бұрын
😂😂🤛👍🏍
@bladefinisch
2 жыл бұрын
Danke auch, hast du Erfahrungen mit der Erhöhung der Lenkung bei der F800GT? Wenn ja wie ist dann die Sitzposition ? Bring es was?
why dont you use a glacial bush ! cheaper available at you Bearing store no one uses plastic
Thanks for sharing How do I adjust the clutch on my 2020 r1250 gs? Very hard to put it in gear Any information is appreciated.
Hi, what size torx did you need to remove the second item you removed?
@jerrick.warren
Жыл бұрын
I would like to know as well.
But that is not the bolt you are talking about. Sorry for the misunderstanding.
Shift lever on shift shaft has a tightening torque of 9Nm
Can the shift pedal be adjusted in height? Thanks
@TheOldMechanic
Жыл бұрын
Yep you can 😉
@tobias2044
Жыл бұрын
How you do it? 😅 Thanks
Waar kan je deze onderdelen aanschaffen?
@TheOldMechanic
2 жыл бұрын
Bij een BMW dealer 😉🏍