BMW E90 N54 Coolant Hose Flange Replacement Upgrade and Coolant Bleeding
Автокөліктер мен көлік құралдары
Coolant Hose Flange- www.fcpeuro.com/products/bmw-...
BMW Coolant/ Antifreeze- www.fcpeuro.com/products/bmw-...
The coolant hose Flange is known to fail. Replace it before it gets you stranded. For e90, e91, e92, e93, e60, e61, f30, 330i, 328i, 335i, 128i, 135i, 528i, 535i, n52, n54, n55
Пікірлер: 81
aluminum torque is 7-11 ft/lbs. For this project 7ft/lbs
@patrykiwan9346
4 жыл бұрын
Javier Ponce thank you
@Sink886
4 жыл бұрын
I torqued mine to the same as the vanos solenoid
had the exact same issue on my e60 while in the grocery parking lot. fixed it in under 10 mins with the help of this vid and saved me money on the tow. thanks!
Mine literally pissed itself today and narrowed it down to this, thanks amigo
@patrykiwan9346
4 жыл бұрын
Jordan Walsh no problem. I had the same thing so I decided to make a vid on this since I couldn’t find one on KZread. Was at a car meet and just saw stream coming from under the hood lol. Definitely not a fun moment.
After watching soooooo many videos I finally figure out what I was missing, thank you.. ps I originally put a 14in socket in there replacing the plastic extension it helped me in the meantime. I overlooked this way too much.
Just happened to me thank god in the parking lot at 175k on mine. Thank you for the video!!!
Thanks for this video, helped me fix my car!
Thanks - great explanation with just the right amount of details and visuals.
My BMW 06 330i 157K miles coolant hose flange got toasted today because of the heat & leaked entire coolant! What a Monday!
@patrykiwan9346
4 жыл бұрын
Rubby Romo bmws break but we still love them
@rubbyromo1075
4 жыл бұрын
Patryk Iwan Agreed. However, when car is repaired, BMW will go up for sale. I’m done with this money pit car.
I needed this bad
Great video. Good knowledge.
You are a life saver ! Great video, it was very helpful. Thanks for the knowledge.
@patrykiwan9346
4 жыл бұрын
justin okeefe I’m glad it helped. Thanks for the support.
Great video bro I just had same issue and I’m glad your video came to the rescue
Great video thank you
Thank you for the video bro
Great video. Thank you.
Thanks man. Appreciate the video. Found that I had a broken flange. I got coolant all over my belt. Would I also need a new belt?
Bro thanks so much, if I ever have my house flange snap Ill know how to replace it fast!!!
Nice work Boss! I did the same! This is a really great video of the right way beginning to end..
Same issue is just happened today with me. Luckily I arrived back on my drive way. (I mean is just happened there, I don't drive it after that) I need to look at it tomorrow, but first need a new part. Thanks for advice.
Good video I have the same problems so now I no how to fix it thanks
Lol my old one looked EXACTLY the same. Just changed my thermostat, waterpump, tensioner pully, belt, and fighting with the charge pipe now
Will this throw a code for electric water pump "missing"
Can use other G48 coolant such as Comma, same thing. Funny how we have to upgrade oem BMW parts we don't trust, yet assume their coolant is the best lol
Is it common smoke still coming out after fixing up my hose on my 335i bmw
Thanks for this video. I'm at 146,500 miles. Haven't had this fail yet. But, I might be looking now at the driver's side heater hose (corrosion below the upper coolant hose that goes to the oil filter housing gasket). Have you had to mess with that yet?
@HunterBishop30
Жыл бұрын
A very late response to you. But I had the hose you are talking about fail at 148,000. This part in the video failed at 152,000
@TheFrenchPug
Жыл бұрын
@hunt playz Thanks. I had already replaced it but forgot that I did it. Now my turbos blew and I need a new High Pressure fuel pump :(
how much time needed to change that hose?
Do you leak out coolant after disconnecting it from the coolant head? I want to just change out the plastic piece for the aluminum one for precaution
@patrykiwan9346
4 жыл бұрын
Octavio_P Yeah some leaked out. You don’t have to drain the whole system. Just top it off when you’re finished.
What size and type of bolts are they I lost one
Good 👍 즐거운날 되세요
I was at a car meet and left my car running and this burst
Can you put up the description of where you got the radiator ?
@patrykiwan9346
3 жыл бұрын
Ecs tuning
What do you think the cause was mine has done the same thing
@patrykiwan9346
3 жыл бұрын
The plastic just degrades over time due to the heat.
Hello Friend, good to chat with you. Could you remember how much coolant was necessary to complete the cooling? Thank you.
@patrykiwan9346
2 жыл бұрын
I would buy a full gallon just to be safe. You mix the bmw 50/50 and you’ll have 2 gallons. That is more than enough. You can find the bmw coolant online or at your local bmw dealer
How did you get the clamp off
@patrykiwan9346
4 жыл бұрын
BMW X3 if your flange broke off it should slide right off
Does this bleeding procedure apply to 07 n52 engine?
@patrykiwan9346
4 жыл бұрын
Alejandro Sanchez yes every n5X series engine
if you are replacing the flange just bang the plastic flange until it breaks, and the clamp will just slide off.
Do I bleed it with the coolant cap on or off?
@patrykiwan9346
4 жыл бұрын
T k It really doesn’t matter but it’s probably easier with the cap off since you can keep an eye on the level of the coolant and add more if needed.
I just replaced mine and now my car is smoking from the left side. Any idea what that could be??
@patrykiwan9346
4 жыл бұрын
If you have smoke coming from the back left of your engine bay it is most likely your valve cover gasket leaking and the oil dripping on your turbo exhaust manifold creating the smoke.
@KaliCoSays
4 жыл бұрын
@@patrykiwan9346 Thanks. I wonder if that is part of the recall i heard about.
@patrykiwan9346
4 жыл бұрын
@@KaliCoSays The recall just covers the blower motor wiring. The gasket is just regular maintenance.
I changed my oil filter houseing gasket and removed that to get that torx bolt and the plastic broke. It ran all the way down my block
@patrykiwan9346
4 жыл бұрын
Dimitri Ysalde often breaks during the gasket change
@dimitriysalde2980
4 жыл бұрын
@@patrykiwan9346 yeah its sucked.🤦♂️🤦♂️🤦♂️ appreciate the link with the part tho bmw wanted to charge me 72.00 for the hose and flange as a whole.
@patrykiwan9346
4 жыл бұрын
@@dimitriysalde2980 no problem, thanks for the support
@xpliiciit20
4 жыл бұрын
Same thing happened to me last night :( this is a life saver lol
@jrfvismanos
3 жыл бұрын
Found this video as my hose by the base burst while my wife was driving the car 2 miles from home. Could have been worst. It’s by the right side under OFH ( that hose at time 3:25 on top of your index finger). Got to check it tomorrow if there’s a flange there, but the base did look like it was already deteriorated. Do you know if it’s the same or another part number?
just replaced my ofhg and ochg... broke the notorious flange(mickey mouse connection ) now i lost some coolant and do not have a trickle charger so atm trying to manually bleed coolant air.
@patrykiwan9346
4 жыл бұрын
Braydon Kro you don’t need a trickle charger
@braydonkro1431
4 жыл бұрын
i go off NEWTIS only when working on mine, and others... i have had 3 out of the 20s ive worked on. low chance yes, but defintley need one if you work on them alot...
Awesome video this just happened to me like a 4 hours ago, lol... holy shit what a bad design.
How did you get the metal band off?
@patrykiwan9346
4 жыл бұрын
I just was able to slide mine off easily. If you can't either try to pry it off or cut it off without damaging the rubber hose.
@nonagreeable
4 жыл бұрын
@@patrykiwan9346 thanks I got it off with some force. I spilled so much coolant out of it though... All over the belt
do you have to disconnect the fan?
@patrykiwan9346
4 жыл бұрын
You don't have to but it definitely makes it easier to access the flange and gives you more room to work with.
@pedrofernando4835
4 жыл бұрын
Patryk Iwan thanks brother 🙏🏼
How do i cut the old metal clamp
@patrykiwan9346
4 жыл бұрын
heatchamps2011 use a saw or a Dremel to cut the clamp but make sure you don’t cut the hose. Before you do that try to unbolt it and try pulling it off.
@heatchamps2011
4 жыл бұрын
Patryk Iwan mine broke from the inside . So the plastic bracket is still on the hose. If i can slide the bracket out the brace comes Out right ? I did my oil filter today and i had to take this off smh lol
@patrykiwan9346
4 жыл бұрын
heatchamps2011 that’s what happened to me. The clamp slid off and the plastic from inside the hose came out without a problem.
@heatchamps2011
4 жыл бұрын
Alright hopefully mine slides off. If not ill cut it somehow . Order it should be here tuesday
Happened to me driving my girl home while on the highway way and my car overheated and was smoking like gta the firefighters showed up and all (EMBARRASSING)
Hey just an inform you a 50/50 blend does not make 2 gallons that's only if you got a gallon that is 100% coolant 50/50 blend means half water half coolant if you did it that way that means you're blind is going to be 75% water 25% coolant
Help. My friends shit box broke down and this happened