BMW E60/E65/E66 | Night Vision Camera (NiVi) | Repair Guide

Автокөліктер мен көлік құралдары

This is how to repair your NiVi camera. Basically it is polishing camera lens to mirror shine.
Note: use some flat surface when grinding the lens with sand paper - the surface of lens after grinding needs to be perfectly flat! It is very important, because if you make it rounded on the edges or in the middle it will distort the image!

Пікірлер: 40

  • @teerapote
    @teerapote6 жыл бұрын

    Mine is the same as your's before. Will do this ASAP. Thanks a lot

  • 5 жыл бұрын

    Hi, ok let me know results

  • @MohammedMGhani
    @MohammedMGhani6 жыл бұрын

    thanks man ill try this tomorrow

  • 5 жыл бұрын

    Ok, let me know if it works

  • @domelodi
    @domelodi5 жыл бұрын

    Good work Andrius. Thanks for sharing. Could you please give some advice what to use after 2000 grit to get perfect shine on the lens surface? Cheers mate

  • 5 жыл бұрын

    After grit use some polishing liquid to make it shiny like mirror. Other thing is that you need it to sand it very straight (camera lens surface should be completely flat), to achieve it, remove camera from car, put some sand paper on flat surface (flat table or so), then by hand move camera lens over the sand paper.

  • @krikosx
    @krikosx6 жыл бұрын

    How can we polish it like that?

  • @alexey8140
    @alexey81404 жыл бұрын

    Sveiki, what city are you located? Can you do this for my E60?

  • @arnold_an
    @arnold_an2 жыл бұрын

    Sveikas. Gal gali plačiau papasakot ką naudojai prieš valydamas ? Pas mane irgi problema kad ji užsinešusi yra.

  • @palcoalexandru1317
    @palcoalexandru13172 жыл бұрын

    Do you need to Take out The camera?

  • @fabini14
    @fabini143 жыл бұрын

    Mine is complete black screen, i can see nothing, did you think that is because of that, my lens is very bad like yours.

  • @khalid2050020
    @khalid20500205 жыл бұрын

    Thanks a lot, but where can I find the camera?

  • 4 жыл бұрын

    Camera is located near the fog light in the front bumper. But night vision system is an option, so make sure you have this option in your car.

  • @peshawa-aliswr
    @peshawa-aliswr5 жыл бұрын

    i was do it this but nightvision more dark and complete green

  • 5 жыл бұрын

    Andrius Čiginskas After sand paper use some polishing liquid to make it shiny like mirror.

  • @rickysingh616
    @rickysingh6164 жыл бұрын

    If installing, does this need to be coded in to the head unit?

  • 4 жыл бұрын

    Ricky Singh Not sure about this one, but usually all new options should be coded in.

  • @rickysingh616

    @rickysingh616

    4 жыл бұрын

    @ thanks 👍

  • @buzli1993
    @buzli19936 жыл бұрын

    u did this by hand ? because after 30 minutes of polishing using same grit i cant make it ass glossy as yours

  • @jukaj5364

    @jukaj5364

    5 жыл бұрын

    I have used drill - driver

  • @tobiasw83
    @tobiasw835 жыл бұрын

    Hi, what did you do to polish? paint polish? Plastic polish ??

  • 5 жыл бұрын

    glass polish.

  • @tobiasw83

    @tobiasw83

    5 жыл бұрын

    special brand or variety?

  • 5 жыл бұрын

    @@tobiasw83 I have used Sonax Scratch Remover, but I think any should work

  • @tobiasw83

    @tobiasw83

    5 жыл бұрын

    @ HI, did it as you described it. The lens is glossy again but reflects without that gold hue. What strikes me is that the contrast and resolution has worsened. Before you have seen outlines of cars now it looks rather cloudy. Was that the same with you ?? How long have you polished in each step? Still have some deep craters in the lens. Thanks and regards Tobias

  • @JovanKorica1
    @JovanKorica1 Жыл бұрын

    hi - did you remove the bumper to do this?

  • Жыл бұрын

    Hi, no.

  • @JovanKorica1

    @JovanKorica1

    Жыл бұрын

    @ ok - so how did you remove the plastic grille/cover in front of nivi? Because i cant easily polish it with this in the way, and ive been told bumper has to be removed to get this off…

  • Жыл бұрын

    @@JovanKorica1 You can just remove plastic grill cover by pulling it out.

  • @JovanKorica1

    @JovanKorica1

    Жыл бұрын

    @ ok cool, interesting. I will try this soon. Thank you!

  • @andriusurbonas9768
    @andriusurbonas97682 жыл бұрын

    Koki poleruokli po sveitimo naudojai? Pas mane lygiai tokia pat beda.

  • @alialehtin4281
    @alialehtin42816 жыл бұрын

    do anyone try this

  • @JovanKorica1

    @JovanKorica1

    Жыл бұрын

    did you do this?

  • @koviniseziukas7668
    @koviniseziukas76682 жыл бұрын

    Polished.. Wont show anything :/

  • @JovanKorica1

    @JovanKorica1

    Жыл бұрын

    is it like a mirror finish?

  • @koviniseziukas7668

    @koviniseziukas7668

    Жыл бұрын

    @@JovanKorica1 yea

  • @JovanKorica1

    @JovanKorica1

    Жыл бұрын

    @@koviniseziukas7668 did you get it to work in the end? mine looks like the first picture in this video atm.

  • @koviniseziukas7668

    @koviniseziukas7668

    Жыл бұрын

    @@JovanKorica1 nop it get worse after polishing and shows like ghosts in screen :D sold the car already. Maybe it was broken itself. If its in bad condition i should try to polish anyway maybe it works for you. Who knows..

  • @jukaj5364
    @jukaj53645 жыл бұрын

    Sand polish paste for headlight after the 1000 2000 2500 sandpapers. My is like a mirror. The white powder on my is the polishing paste. See tinypic.com/r/3585gtl/9

Келесі