Awesome work man!! Just getting my 2001 back on the road this year, I'd like to do this mod in the near future.

Amazing job you did sir !! I did The same think to my 540 but i used fan from 2003 bmw 745Li because dose not have a brushes inside is completely different fan is controlled by PWM signal and will last forever then the regular fan with brushes .

@WestinghouseProductions

7 жыл бұрын

Cheers Andy. I did look at using the PWM fan from another BMW, but decided I wanted to use the SPAL ones to give me a bit more clearance on the front fo the engine for when I'm working on it. Glad you enjoyed the video - it's great to know people are interested in what I get up to in the workshop.

What is the symbol on the fan?

Would you sell a kit for this car? or a premise shroud shroud? I can definitely get the rest done on.. it’s just folding that shroud and cutting it right..

After a year of having this set up, how has it performed?

How were you able to get the readout on your media center for coolant temperature And all that other data? Do you have any pictures of how you mounted the temperature sensor and relay? Awesome job mate! I will have to try this next weekend

@vosedon

4 жыл бұрын

Damn he never got back to you. I want to know too. Did you ever find out how to do that???

My friend could you please make me a list of what I need ? I am throwing out my visco. I have a m52b28tü. The engine is an other. But I think this cooling System Is the best I have seen so far. I dont know what I have to buy. Just tell me what to order and I will bring it to my mechanic. He will know how to bring everything on. Just tell me please what to order. I have already the 4th visco broken and all radiators and waterepipes broke because of the visco break. and the hood has dents too. Its driving me crazy. I need ur help.

Amazing job !!! Since the stock pin config is 3, and fan is controlled via PWM from the ECU, how did you get to switch the fan on when A/C needs it? i.e. idle, traffic lights waiting in hot etc.

@WestinghouseProductions

5 жыл бұрын

Martin, cheers. The standard A/C pusher fan is still in place and runs as per OEM. The additional cooling fans are controlled by an adjustable temperature control panel within the vehicle.

@funky7122

5 жыл бұрын

@@WestinghouseProductions Thanks for your reply, mate. You are totally right, excuse me for my stupidity. I got caught by the fact that A/C fan should go because IC is coming in soon, so was looking for solution which would turn those fans on when need by the A/C also. Cheers

Hi m8 cooling fan needs to be suction or blow function

Hey Paul, my M5 is in good shape to begin with 37k miles, I just dropped a CSF radiator in my M5 with dual 12” spal puller fans. In theory car should run at normal temperature or cooler, I did the clutch delete to free up that parasitic drag from clutch fan and to avoid clutch fan failure and damage. However this is where I’m at on 86f ambient temperature in moderate traffic. Stock pusher fan works, puller fan works well pull hard, 180f on 165f off temp switch in bottom right of CSF radiator just above the return hose. The oil temp needle should be slightly to left of 210 not to right of 210 mark. Coolant temp in hidden menu is at 96c and oil temp temp is 104c, no warning lights or anything. Any advices or pointers? Greatly appreciated!

@Oopsallempty

2 жыл бұрын

These cars run at 220 Fahrenheit, unless you change the thermostat. No matter how great of a rad and fan setup you have. Also oil will vary much further than coolant. Oil temp isn’t really a concern until about 230 Fahrenheit

HOW DID YOU GET THE READOUT ON THE MEDIA SCREEN. THATS AMAZING CAUSE I HATE TO USE THE CLUSTER EVERYTIME I I WANT TO SEE THE DIGITAL READ OUT OF TEMPERATURE. PLEASE !!!

@WestinghouseProductions

4 жыл бұрын

Using an Intravee.

Curious on how you used the DME signal for the fan wiring. No relays? My fan setup has a high and low setting (2 relays) and runs off a switch mount on the the side of my radiator. I feel as if it comes on at the last minute and not maintain the temp like yours coming on and off randomly before it gets that hot. I assume the wires you used are can bus on the switch side?

@WestinghouseProductions

7 жыл бұрын

The electrical system uses a 200 amp relay to switch the fans. The control side is via an 86-81 celcius thermostatic switch which is housed in the silver switch housing unit in the lower radiator hose. If you wanted to utilise the PWM signal from the ECU that also controls the auxillary air conditioning fan, then SPAL sell a unit that you can use too. I opted for a mechanical switch for the moment and I'm happy with it's operation so far.

@borismonov2767

7 жыл бұрын

Would you make one kit for me? I will pay. My current setup is with one cheap ebay fan and I have overheating problems if I go WOT.

@WestinghouseProductions

7 жыл бұрын

Hi Boris. Thank you for the offer, but I don't have the resources or time to put these to market. If you change your fan to a SPAL or Kenlow unit then that should assist in your issue, but if your engine is overheating when you are at WOT then there may be other issues with the cooling system that need addressing first.

How do you get that kind on info on navi display? coolant temperature, rpm, speed etc. Do you got some custom software or is it m5 thing?

@WestinghouseProductions

4 жыл бұрын

It was done using an Intravee.

Where in Amityville are you? Your shop!

@WestinghouseProductions

4 жыл бұрын

Borkshire!

Can you provide part numbers for the intermotor and rdx ? Thanks

@WestinghouseProductions

4 жыл бұрын

RDX mounting block is available from a shop called 'Bolt-on-bits' in Bradford (West Yorkshire), UK. Fan switch I can't remember the part number unfortunately.

How do the Fans work ? Where does the Power come from ? When do the Fans know when to turn on ??? Where comes the information for them to turn on ?

@MansurRami

3 жыл бұрын

The power comes from the battery terminal as seen in the video, this black box with a + on it. Thanks to the temperature sensors, the fans will know when to turn on. When the temperature for example reaches 89*C degrees the sensor will send a signal to the relay or whatever u have that controls it that later on turns on the fans.