Hey guys, I got some requests for connection diagram, so I made this instruction: 1drv.ms/u/s!AglExuJSVvhVjd0_tvCn8bevQ2ahlA?e=gXBcVY

@Taz...

3 жыл бұрын

The diagram does not make sense, because you get signal only on closing( pin 10) and not on opening( pin 1) so they will only fold when the car is locking and not unfold when unlocking. They will unfold the next time you lock though.

I want to do this on my car can you please tell me how you do it?

6 жыл бұрын

you need to add relay. Relay is activated by voltage from door locking mechanism and is "pushing" folding button.

@Rokaworks

6 жыл бұрын

can you please tell me which excactly cable from car must use? and how to do this? If you will tell me all information and make me some tutorial, i will pay you i swear :) !!! I dont have problem to pay for information.

4 жыл бұрын

Sorry, I dont have this car anymore :D

How? What wires? What relay? Where?

5 жыл бұрын

Take signal from door lock actuator. Route wires to door panel switch console and connect to folding mirror button. Intall relay that will open/close the contacts for folding mirror button. Connect signal from door lock actuator to supply the relay. When you will lock/unlock the car, signal from atuator will supply the relay, and relay will "press" the mirror folding button.

@donzile

5 жыл бұрын

Andrius Čiginskas Thanks brother!

Carly?

6 жыл бұрын

No, i just installed relay, which activated folding button.

@1D0N

5 жыл бұрын

If you can't code it with NCS Expert, you surely can't do it with Carly. As he says, it's a hardware mode.

Kokia butent rele reikia naudoti?

4 жыл бұрын

Bet kokia +12V rele su sujungiančiais kontaktais. Aš kiek pamenu naudojau paprastą relės modulį iš Ebay. www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=12V+1+Channel+Relay+Module+Optocoupler+High+and+Low+Level+Trigger&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=1x+12V+1+Channel+Relay+Module+Optocoupler+High+and+Low+Level+Trigger

@vaidaskamarauskas9993

4 жыл бұрын

@ Ir laidus reikia nuo uzrakinimo spyneles prijunkt per rele ir i mygtuka?

4 жыл бұрын

@@vaidaskamarauskas9993 Taip, užrakinant/atrakinant duris +12V iš spynos aktyvuos relę, o relė "paspaus" veidrodėlių užlenkimo mygtuką.

sveikas. gal zinai kiek uztrunka ir ko reikia tokiems veidrodeliams persidet ?

7 жыл бұрын

Justas Silinis Sveikas, reikia kad būtų užsilenkiantys veidrodėliai mašinoj (kvadratinis mygtukas šalia veidrodelių reguliavimo mygtukų). Kad užsilenktų nuo pultelio, reikia paimt signalą nuo durelių užrakinimo spynos ir per relę nuvesti į tą kvadratinį užlenkimo mygtuką. T.y. užrakinus mašiną su pulteliu, signalas iš durelių spynos aktyvuos tą veidrodėlių užsilenkimo mygtuką.