Nice clear demonstration of the mods you had to do to get the walbro to fit the carrier. Thanks so much 👍

@evosgarage

Жыл бұрын

Thanks for watching! I appreciate your words!🤜🏼🤛🏼

Muy Bueno Garoto !!! Vamo'Arriba Tudo Bem, Tudo Certo !!!

THANK YOU! Need to replace my Walbro HPFP tomorrow and this is very helpful.

@evosgarage

Жыл бұрын

I'm glad it helped you 🤜🏼🤛🏼👌🏼

bro don't you need to have a two-fuel line going for the fuel pump?, i have only one fuel line like yours and i bought a white fuel pump and top line is leaking due to not having any hose connected. Do i need to block one of them so fuel wont leak ?

@evosgarage

10 ай бұрын

Different versions of the E36 will have different configurations of the fuel pump assembly, on my case one port is open and the other is closed from factory. I've seen other models that used both ports on the top.

Hello Brother~ Why didn't you take this opportunity to change the tea-bag looking filter? ..is that not an option? or is that NOT a filter? Great video, I hope I don't have to do this soon.. but if I do : Thanks!

@evosgarage

11 ай бұрын

You don't have to replace it unless it's falling apart because it's only a plastic mesh. It only stops solid debris from going in the pump. You can clean it from inside out and it will be good as new, just put it back again. The main thing is it being clean!👍🏻

Knocking up an old thread... just a quick 1, why is the other hose nozzle there if there's no hose supposed to go on it? The reason I am asking is that I have the white housing exactly the same look as this yellow 1 and mine also doesn't have a hose connected to that 1 outlet so over half tank it seems to be pushing fuel out of there... any advice there guys???

@evosgarage

2 жыл бұрын

Hi! If I remember correctly on mine that isn't open all the way through. I believe they probably cast them all using the same template and only drill that nozzle for the applications that required that nozzle.

@sivz87

2 жыл бұрын

@@evosgarage mine has an hole all the way through, doesn't seem like it was ever drilled for the hole to be open...

@sivz87

2 жыл бұрын

@@evosgarage cause if I don't block that outlet off after filling like half tank fuel it pushes back out there for some reason... not sure if there's a pipe supposed to be connected there leading from somewhere else

@sivz87

2 жыл бұрын

@@evosgarage i would have attached the picz for you to see but can't seem to find a button for attachments

Do you need a relay kit for this?

@evosgarage

Жыл бұрын

Hi Timothy! No, you don't need a relay kit! Thanks for watching!👍🏻I appreciate it

What hose u used between fuel pump and housing.. ?

@evosgarage

3 жыл бұрын

Hi! If you buy a fuel pump kit it comes with about 10/15cm of fuel resistant hose! If you just need the hose any car parts store will have or you can go on ebay and search for fuel resistant hose with about 7.5mm inner diameter. Hope this helps you.

@dangeloterrance8875

2 жыл бұрын

instablaster.

Hello, can you please send me the link to the fuel pump you bought ? thanks!

@evosgarage

6 ай бұрын

It's a Walbro 255. I'll see if I can get you a link.

@evosgarage

6 ай бұрын

Something like this! www.ebay.co.uk/itm/125493987297?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8RQ_zxjPREa&sssrc=4429486&ssuid=kEaaQKCKR9C&var=&widget_ver=artemis&media=COPY

@raresgeorgeroca8538

6 ай бұрын

Thanks a lot! 🎉

o que acontece se meter uma bomba de um 325i num 316i? posso o fazer?

@evosgarage

Жыл бұрын

Sim Julio! Se for o mesmo chassis, ela encaixa la de certeza e o mais certo é a do 325i ter mais debito do que a do 316i. Abraço

@juliomartins6570

Жыл бұрын

@@evosgarage sim eu referia me ao facto de não ter problemas a nivel de motor por ter mais debito? porque assim já teria uma bomba para quando conseguisse fazer swap

@evosgarage

Жыл бұрын

@@juliomartins6570 @julio martins não vais ter problemas por ter mais debito porque o regulador de pressão que ta na regua de injecção vai continuar a manter a mesma pressão que estava. Para aproveitares esse debito extra tens de ter injectores maiores e um regulador de pressão ajustavel.

@juliomartins6570

Жыл бұрын

@@evosgarage sendo assim posso colocar uma bomba das de alto debito num carro stock sem qualquer problema? o carro vai trabalhar como normal se não fizer qualquer outra alteraçao?

@evosgarage

Жыл бұрын

@@juliomartins6570 sim,foi exactamente isso que eu fiz neste video! 👍🏻

Where did you buy the fuel pump from?

@evosgarage

3 жыл бұрын

I've bought it off ebay. Give me a few minutes let me copy a link for you

@evosgarage

3 жыл бұрын

Here you go! That's the fuel pump including the fitting kit for bmw e36. www.ebay.co.uk/itm/WALBRO-255-FUEL-PUMP-FITS-BMW-E36-320i-325i-M3-COUPE-NEXT-DAY-UK-ON-SALE-NOW-/163183081656?_trksid=p2349624.m46890.l49292

@theunknown1492

3 жыл бұрын

@@evosgarage thanks man ! Really appreciate it

@evosgarage

3 жыл бұрын

@@theunknown1492 no worries! Thanks for watching!👌🏼

@looneysim8015

3 жыл бұрын

Do you have a Driver side door panel