Drop a comment for fuel pump daddy! 💦

@christopherrogers8316

5 жыл бұрын

im getting a 255 for my boosted ep3, do i need to buy it with the install kit?

@kedaotuning

5 жыл бұрын

walbro 450 600+hp on e85 whit relay i replaced it every year just to be on the safe size im also going all motor on my street car whit VP M5 race map whit a external FPR cant wait to see the numbers. been using walbro for years K.I.S.S.

@joshreynolds729

5 жыл бұрын

So why is it called the hellcat is this what the hellcats come with for a pump in aftermarket translation? The reason I ask is I have a 16 hellcat challenger and as of now I dont need any crazy fuel pressure it's mostly stock on pump I just need a plug and play type kit that can be used for daily on pump and later on e85 and support 800 850hp just dont want this thing fucking up lines and other crap because its giving to much pressure. Also if I do this does it need a tune or will it except the old computer data and run fine after install. Pumps going out. Also if you have a pump that works was thinking the 525 but if you have reasons not to get it or if it needs special fittings please let me know.

@ashleyvidrine6636

4 жыл бұрын

I have the fore triple billet pumps for a 03-04 cobra and has 3 255 walbro pumps and I want to be able to run e85 with 1000 hp can I use 3 Walbro F90000267 to do that, its 3 6an lines into a single 8an line to the fuel rails

@robertburton295

4 жыл бұрын

I have 01 Chevrolet truck 5.3 going to put the tbss intake and injectors with a bigger cam factory isn't holding up what do you think I need

Leo getting it done! Great vid bro!

Thanks for taking the effort to make this video. Great editing

Lol I was pretty entertained watching this thanks dude

Thanks for the info. Just got my 525 installed with my 1700ID's 😃

This video has gotten me so pumped!!

@maperformance

5 жыл бұрын

Get pumped Derrick!!

@castielangelofthelord1992

4 жыл бұрын

@@maperformance So I know this may sound stupid, but I just get anxiety around stuff like this because it costs money. I was moving my car parts for my upgrade into storage since I wont be upgrading for around 6 months, and I dropped my Walbro 255 fuel pump from about 2 meters high. It was in a box but no padding etc, and I am scared I have damaged it. It looks fine but some research shows that dropping them can cause them to become inoperable. Worried I am going to have to buy a new one.

I have that Walbro 450..... nice.👍 thank you for the info on the wire kit from DeatschWerks....I wondered about that when I installed my W-450...

@maperformance

5 жыл бұрын

Thanks for watching Craig!

HEY! Do i need to do electronic adjustment to put this pump, I have the pump here at home but i dont know if i can put it or if I should to adjust electronics like with the exhaust system... thank you very much!

That's a cool DSM right there! 6:50

so do i need a turbo or a super charger just to replace my oem fuel pump to a performance based fuel pump, because im looking for better performance but without having go turbos , i have a 2015 honda accord v6 exl.

I just bought a walbro 255 from this company and l was wondering if a tune was needed after install or am l good to drive around after ?? Its on an 05 wrx daily driver.

PWM Pulse width modulation makes the most sense to ,me.. I am looking to do an LS swap into a car that had a carburetor and 6 psi pump

Please help me wire the 525 to my x6M the ekps module has 5 wires going to the fuel pump...

Would be great to have a vid on how to plumb a double or tripple pump setup... also how to go about twin entry on fuel rails.

How much does the hellcat pump and next down version flow at 100psi?

When my car is at 3/4 of a tank full the car stutters in second and third when you do a full acceleration when you have a full fuel tank it runs great what do you think the issue could be?? I have a 450

Great news ! Which of these pump would you recommend for my Mitsubishi 4g64 year 2001 chariot grandis

Do I need a wiring upgrade if I use a 255?

How well do the 450’s pull?

Can I use 93 or e85 on a regular 450 ?

Which pump do I need for a 2011 Silverado 4.8L Flex Fuel under turbo pushing 650RWHP?

Is there a saddle fuel tank option for use in conjunction with a syphon pump? AWD split tank applications

I know this is old but what would i use to replace stock pump for sc300 but I’m upgrading to a fuel cell ( to lower center of gravity ) but stock ecu and block. Will probably call you guys once i get the chance.

My 2017 jeep srt is stock and the factory fuel pump failed so Can I replace it with this pump for daily use?

Hi, which pump will be appropriate to be used on a BMW E70 N62 engine? The engine makes about 350 bhp.

So I bought a 525lph Hellcat for my turbo build on my bmw s54 e46 m3 I am shooting for 700+hp on pump, I won’t be running stock fuel lines, or fuel rail.

Thank you for doing this videos

@maperformance

3 жыл бұрын

Glad to help!

What AMP rating alternator is recommended for the 535?? Because I just installed this pump and my car is running lean. Cannot tune it out. My alternator is rated at 75 AMP.

Hey just wondering I have a XR6T 1000cc injectors and have a 400 walbro looking to get 400kw do u think that's enough?

Perfect!!

I have 2 450 pumps, and I wanted to know how can you tell if your pump has a internal check valve??

Hi I need to replace the Walbro pumps on two Detroit diesel 6-71 turbo marine engines

Hi for a Mercedes c63 2009 whit ecu tuning 511hp what is the correct for this car ?

I own a lexus RX450H 2010 model running with ethanol wich pump do you rcommend , i still have the oem Aisan pump

Great video!!

@maperformance

4 жыл бұрын

Thanks for watching Matthew!

Do you need a return line system for the 525??

I'm doing a ls3 swap in my 04 infiniti g35 coupe, and I'm not boosting or using turbos, just installing a 3 stage cam, and won't be going over 500 hp, what is the perfect in tank pump that will work for me? a guy told me the Hellcat 525 is the way to go. Plz help, Thanks< video is very informative also... I sub

I have 440cc injections and I was wondering if I could use my hellcat pump, n/a

Does the walbro 465 have a check valve built in?

It doesn't causes shortage by E85??As if when you actually spliced the power and also spliced ground in an intake with regular butt connector. Am nervous as doing regular butt connector and planning on use E85.Didnt use heat shrink either. Kinda nervous !

450 high pressure for a 5.7 twin turbo hemi? Hoping to get 600 on e85

Great video! I currently have the 450 high pressure with a stm hard wire kit on my DSM. And made 480 hp. Currently trying to decide if I should upgrade to the 525 or just do a in line pump to compensate. Since I ran out of injector on the dyno the new 2150cc injectors will be going in. Pump gas car currently, might go e85 🤷🏽‍♂️

@maperformance

4 жыл бұрын

Vic give us a call or email sales@maperformance.com - we'd love to help out!

@emiliochavez4824

4 жыл бұрын

You'll get better hp n tq with the e85 just a less common fuel.. I have a switch for my ECU to switch between tunes e85 n 91

ok here the thing...... i have an bmw e46 325i 2002 and have the engine m54 stock.....just want to change my fuel pump caus think is not at 100% so, thinking on make the change and upgrade the fuel pump....so i was thinkingo on a Walbro GST400. want to know if can be correct this option...

Hey gnt am living in Jamaica I have a k2o Honda engine nun turbo what the best pump I can use in fuel tank tank tank

I want a fuel pump for a Subaru Outback 2002 stock what's the highest I can do

I have a Monte Carlo super sport. I'm putting a 5.3 truck Norris cam 92 mm intake and headers on nothing fancy but just feel like the 255 would be too little. Would the 450 be good for this motor?

I have a 1999 Ford f350 supercharged forged V10 running a boostapump what size of pump do you suggest thanks.

What size fuel # AN line size would you use for 450 high pressure pump & 525 LHI when using E-85 fuel?

Can I run the Hellcat on my F10 M5? Currently running full E85 with AN 8 fuel lines. I will really appreciate the help. I have been on hold for a while. Thanks

Does anyone know how to put a walbro pump in a 2010 Tahoe,it won't fit in the drum

thanks for the great info. Will dual 450s (not high pressure version) on a fore return system supply enough pressure for e85 on a 2015 mustang paxton kit? ~700whp

@maperformance

5 жыл бұрын

Give Leo a call! Ext 107 🤘

This video has me so lit rn 😂 hellcat pump ftw

Excellent content 💪💪, I'd like to know more about your inline pumps since I'm needing a second or third one. On my way too 800-1000whp. 2jz! Thanks

@maperformance

5 жыл бұрын

Shoot us an email! sales@maperformance.com 🤘

@yotahoon1421

4 жыл бұрын

@@maperformance watch for my email! I'll be asking about the turbo caprice!

Very Good Video. Well Done

@maperformance

4 жыл бұрын

Thanks for watching!

Can I add fuel pump to 1980 Honda CB900c

MY 525 WALBRO PUMP MIGHT NEED PEPLACING? THE RELAY IS GETTING HOT AND THE CAR SEEMS TO START MISSING AT IDLE

Hello what reference for a mk7 gti please ? In 450l/h

Hey guys... Love the video... I have a question and hoping you can help me...??? My car is stock standard its 210hp currently Audi A4 Quattro... I am planning to forge the motor and drop a bigger turbo in later... So i thought of starting with some upgrades around the engine such as the feul pump, i am looking at the hellcat and want to know what will be the pros and cons if i install such a feul pump but motor is still stock...??? Will it cause any problems or will it be suitable for everyday drive...??? Thanks in advance :)

@maperformance

4 жыл бұрын

Great questions, we'd love to talk specifics can you shoot us an email: sales@maperformance.com - just easier to go over your situation 🤘

since I plan on once I buy my 2008 lancer evo gsr to have around 540 or so hp should i upgrade the fuel pump right away or wait till I get the turbo and the other performance parts installed and on the dyno?

@maperformance

4 жыл бұрын

Hey! Shoot us an email we'd love to help: sales@maperformance.com

i have walbro 450 but im having hard time hardwiring this and i dont see any great install video.

Simple question: How on earth do you fit the supplied tube to the pump's barbed fitting? It's very, very tight and I'm afraid to break it... (walbro 450 kit for 335i)

@freddiemendoza4188

2 жыл бұрын

Heat it up with a heat gun and gently start pulling. Same way when installing if you want to use the same tube.

I just bought a 450 with the pigtail for my supercharged 6.1 hemi with 625whp. My question is will I need to add a fuel pressure regulator when I install the pump or will the factory regulator handle it?

@maperformance

5 жыл бұрын

Shoot us an email Timothy! We would love to help out. Leo@maperformance.com or ext 107

I have a 2018 Honda Civic si, I was wondering if you have any pumps for e85 for that car

@maperformance

5 жыл бұрын

We can hook it up, give us a call or email: sales@maperformance.com 🤘

Is the Holley 470 also known as the Hellcat?

i I have a 2007 BMW e90 335i. In my vehicle the engine has been rebuilt and it has two t17 turbos. the pistons was enlarged. intercooler and all other systems were made. Now I plan to change the fuel system and get 800 hp +. Which of these systems would be appropriate for my vehicle to get more power? and I have jb4 chiptuning in my vehicle, I want to make port injection and methanol connections. thanks

@maperformance

3 жыл бұрын

Shoot us an email: sales@maperformance.com we'd love to talk specifics with you!

What Intank pump do you recommend for a fwd Seat Leon 20vt approx. 600whp ? Which is easier to put on?

@maperformance

5 жыл бұрын

Shoot Leo an email or call: ext 107 or leo@maperformance.com

I have an 1999 honda prelude automatic all stock.. can i use a 255 lph walbro gas pump to update my old fuel pump?

@maperformance

4 жыл бұрын

Absolutely, give us a call or email us and we can get you the right pump & filter combo for your ride!

Love ur video, which of the pumps will be good for my bmw x3 e83 inline 6. Having pump issues, help pls

@maperformance

4 жыл бұрын

Samuel give us a shout: sales@maperformance.com we'd love to help you out.

@Linoge279

4 жыл бұрын

255lph should be sufficient, mine e46 m3 using it and pretty happy with it so far.

Need a pump for my ls motor 83 monte with 88 gas tank 4.3 pump in tank

We need a install video

I have a Walbro 400 on my procharger Dodge Challenger with 600whp. The 400 is used with factory wiring with no issues. Now, I am steping up to over 800whp and I just purschase a Walbro 525. Will it be a plug and play now? Even with factory wiring?

@maperformance

4 жыл бұрын

Cesar, shoot us an email: sales@maperformance.com 🤘

Where can I buy a walbro 525 and know its the real deal that won't fale on me?

Would any of these work on a 97 cobra with a Kenne bell supercharger?

@maperformance

4 жыл бұрын

Ethan give us a shout! We'd love to talk specifics on your build and get you the perfect pump: sales@maperformance.com

I’m looking at a turbo Scion tC turbo and the fuel pump is making a loud buzzing/ humming all the time. Is that normal??

@mk6_mark920

5 жыл бұрын

BULLI KID on my Jetta it only humm’s when I turn the key & don’t fully start it for about 3 seconds makes the noise, the noise is the fuel pump priming up

@BulliKid

5 жыл бұрын

This scion is non stop when idle and driving. Very loud and noticible

Will the Walbro 525 be too big for the stock fuel system of mitsubishi evo 4?

@k4kri

3 жыл бұрын

Way too big, the stock regulator on my RB25DET couldn’t even handle the 255 pump

Hi dears. My car is E36 M3 with engine S50B32 eurospec. Stock pressure regulator of fuel is 5bar but in tank i have stock bmw fuel pump which presses 3.5 bar. So im going to change it but which i should to search? Also, guys you are the best i have ordered some parts, great packaging and quality!)

@maperformance

4 жыл бұрын

Give us a shout Altun! sales@maperformance.com

Ok so i 09 wrx running a fp zero ans id2000s. I want to break 600hp will a 525 fuel pump get it done?

@maperformance

4 жыл бұрын

Give us a call! Leo can help you out. Or email sales@maperformance.com 🤘

I'm wanting to get about 800 RWHP from my gen4 5.3 with twin small 60's turbos. How about recommend a EXTERNAL inline fuel pump that can give me the flow and pressure I'll need!

@maperformance

5 жыл бұрын

Shoot us an email! Sales@maperformance.com we'd love to help out!

Sup which one is the best for everyday driving and for street drag the engine is a Toyota 4afe with the injector in the head

@maperformance

4 жыл бұрын

Arif shoot us an email: sales@maperformance.com - we'd love to help out!

What kind of Walbro pumps can I install on my 2003 Mitsubishi Eclipse gt 3.0 V6 ??

@maperformance

4 жыл бұрын

Hey Jay! Give us a call we'd love to help out with that Eclipse!

Iv'e had two walbro 460's fail in two years...dont know why...but i'm over it.

Are all walbro's ethanol proof? looking at a small 255 for my trackcar. Stock pump died

@maperformance

4 жыл бұрын

Give us a shout: sales@maperformance.com

Hi just subscribe to your channel. Daddy O here from Philippines. Just wnt to know the exact fuel pump to my Ae101 Corolla levin GT-Z 4AGZE engine? Is it the 255LPH or 340LPH? Many thanks for your reply!😅

What would you recommend for 500whp on Subaru for pump gas?

@maperformance

4 жыл бұрын

Give us a shout Derrick! We'd love to have Leo or someone help you out on that one.

Will this fit on a mk7 GTI 2017

@maperformance

5 жыл бұрын

Please email us! Sales@maperformance.com

whats the name of the company that makes the relay kit?

@maperformance

4 жыл бұрын

Deatschwerks and / or STM both make one

Hi. How come you guys don't answer questions here? I am looking to buy a pump for my 2011 535i stock, I wanted to know if I could install a 450 model. Thank you.

@maperformance

3 жыл бұрын

Hi! Send us an email at sales@maperformance.com and we can answer all your questions!

Can u tell me wat pump can I use on 4 cylinder engine for 300 to 500 hp the engine is 4g94, 4g93, 4g92? And wat is the price? It for a ck2 lancer

@maperformance

2 жыл бұрын

Give us a call at 651-348-8811 and we will be able to answer all your questions!

If the wires on a walbro 255 are accidentally connected backwards, can the pump still effectively operate in reverse polarity. I plan on fixing this but I’m letting the fuel get low again to remove the pump also the car is fully built stock turbo 04 srt 4 . Currently on 4 lbs boost for break in period then going to 20 psi. Question of curiosity thanks

@freddiemendoza4188

2 жыл бұрын

I wouldn’t think your car would start. At least that would be the case on the car I have.

@royp2905

2 жыл бұрын

@@freddiemendoza4188 thanks for your input. You are correct it wouldn’t start as the pump was flowing in the opposite direction. I took the wires at the connector on the car side and switched positive and negative to make the pump flow to the engine and it works . Was curious if this would affect the performance in any way. Sry it’s complicated to explain but thank you sir .

You guys got an external 450lph? These all look like internal tank pumps?

@maperformance

5 жыл бұрын

Yes these are - we do have ones but not really a 450. Feel free to give us a call or email: sales@maperformance.com

You have no listings in your catalog or online for Dodge Vipers. Viper guys run Walbros. What am I missing?

@maperformance

4 жыл бұрын

The viper is out of our main niche cars so it might be difficult to find on our site, but feel free to give us a call or email sales@maperformance.com - we'd love to help out!! 🐍

Good day, I have tahoe 1999 & I would like to install walbro pump. How is the quality of Walbro?

@maperformance

2 жыл бұрын

One of the best in the business! Definitely a quality unit!

neat

I need to know if using the 400-1168 install kit on the 450 pump I just bought. It has a flexible plastic hose and just reg gear clamps Will the gear clamps hold on the plastic fuel line Ty Not impressed with walbro cheating out on this

@maperformance

4 жыл бұрын

Hey Ben, give us a shout! We should be able to help answer that.

Nice work I say have more than u need and call it a day lol especially since price isn't much different

Hey Leo, I have a 2020 Chevy Silverado 1500 no engine . Purchased a 427 self built ( don’t ask how much I’ve paid for it. It’s ridiculous ) short block Whipped LT. Anyway, I know you probably won’t get this message, but I’m looking for a fuel system for this truck. I can install two. Walboro 450, a Bean machine sump which I already have all the stuff for it. Flex fuel, methanol injection, Lingenfelter, Katech heads, Callies Magnum crank, Callies Compstar Rods. 1000hp+ daily driver. But anyway, how can you help me with fuel system like I said I have no intention on you replying to this, but I figured I’d write it anyway but I’m getting to that. I’m dropping my engine in right now..

Yeah but do they drop right in or do you have to buy modification kit or a different fuel pump housing

@maperformance

5 жыл бұрын

What pump and platform are you looking at?

@boosted_vq3530

5 жыл бұрын

The hellcat one

@boosted_vq3530

5 жыл бұрын

@@maperformance 04 g35 the 525

Good evening I have benz c230 kompressor coupe serial # wdb7472a329031 super charged ENGINE had in a walbro fuel pump # pat5257916 which would be my best upgrade if you could send a link where it can be purchased I'd be grateful

what about for ~300-400hp evo x? what size?

@maperformance

3 жыл бұрын

Give us a shout! sales@maperformance.com

Which pump for a 6.5 diesel stock 1998?

@maperformance

4 жыл бұрын

Give us a shout Dave! sales@maperformance.com