Like your videos you are very good at problem solving , helped me heaps thanks 👍 P. S . what is the Part called under the Accelerator Pedal ?
@evosgarage4 күн бұрын
Thank you mate! I'm glad it helped you! 🤜🏼🤛🏼 it's called kick down switch. When you press the accelerator all the way down, that switch sends the signal to the automatic gearbox computer to start shifting down the gears in order to increase speed faster.
@marquesmcmillan28315 күн бұрын
Well done!
@Boostlifelex17 күн бұрын
So i followed this video to a Tee and my 10amp tail light breaker pops after 15-20min of running the car with the lights on ...so cant say that this mod is 100% . Unless the video creator has a solution for my constant popping breaker
@evosgarage17 күн бұрын
Hi mate. Not sure what's the problem in your car but I can tell you I've had this mod in my car for years now without any issue and my mate did the exact same on his aristo and never had any problems. I assume there's a problem with the wiring in your car because I've never heard about anyone else with the same problem before. 👍🏻
@Boostlifelex17 күн бұрын
@@evosgarage assuming would make an A$$ out of you and me...there's no problem with my wiring I've been wiring cars for 10 years I'll chalk it up to it being a GS400 anf being slightly different...I followed the club lexus write up and have had no issues since.
@evosgarage17 күн бұрын
I'm glad you managed to sort your problem. I don't know about the specifics for the gs400 as I've never owned one so I wouldn't be able to troubleshoot your problem in the youtube comment section without having the car in front of me, I've only worked on the gs300 and the aristo.
@user-ej5ry3gb9eАй бұрын
What size are the spacers 20 or 25mm I have the same set up but wondering if I could get away with 25 30 mm spacers
@evosgarageАй бұрын
They are 20mm but there's still space, I'm sure 30mm will be fine and look even better
@user-ej5ry3gb9eАй бұрын
Cheers man I’ve ordered 25mm not sure I trust 30s might be to big on the fronts I’ll let you know how I get on dude keep up the good content man
@evosgarageАй бұрын
No worries mate! Thanks for watching 🤜🏼 🤛🏼
@CLS55-FonzАй бұрын
I have these on my e60 and in the medium stiffness they feel good. But too soft or too hard and they ride like crap. Find that middle ground, get ur height to how u want it and go nuts!
@evosgarageАй бұрын
True, it's all about finding the sweet spot!🤜🏼🤛🏼
@Finn_S132 ай бұрын
Works great 👌, thanks alot saved me around 150€
@evosgarage2 ай бұрын
No worries Finn! I'm glad it helped you!🤜🏼🤛🏼
@puchetannesophie36662 ай бұрын
Dommage j'ai acheté les mêmes suspensions et ça ne va pas sur la 525 xi e60
@evosgarage2 ай бұрын
That's sad man😪
@teamd-frog12603 ай бұрын
thank you!!
@evosgarage3 ай бұрын
No worries! Happy to help mate🤜🏼🤛🏼
@colinbignell94133 ай бұрын
I have the same problem with my 2009 C c220 cdi. Only after its warmed up and engine under stress, something happens, no kick down and won't go over 3000rpm.....I will attempt to change the MAF sensor and let you know.
@evosgarage3 ай бұрын
Hi mate! Do it, it will probably fixed your problem! Thanks for watching 🤜🏼 🤛🏼
@PatrickHendrickx-xe6eo3 ай бұрын
Ik heb luchtvolumesenso vervangen en is opgelost
@evosgarage3 ай бұрын
Good to hear you managed to solve your problem 😁🤜🏼🤛🏼
@user-fg2lh2kk6l3 ай бұрын
Run the magnetic bed at 60 set but them don’t last long for me only two times after that did not matter how much glue you used so I will go to glass bed
@evosgarage3 ай бұрын
Go to the glass bed, you won't regret it!👍🏻
@brandondillinger79664 ай бұрын
Do you use a certain type of soder for the board? Good video
@evosgarage4 ай бұрын
I've used low melting point solder wire, makes it easier to solder the components on the board.
@xemlock77774 ай бұрын
Hi, how are the coylovers feeling? Is the car tougher than on the msport suspension?
@Tay745145 ай бұрын
❤ bro. This video just game me the confidence to do the repair myself!!
@evosgarage5 ай бұрын
I'm glad to hear that! 😁 I hope everything goes smooth for you!🤜🏼🤛🏼
@craiggwasira95185 ай бұрын
So satisfying to watch
@evosgarage5 ай бұрын
Thanks for watching 😁
@TheVladulovivan5 ай бұрын
Can you make some video on how to make inner fog lights to light up when you brake like US cars? Thank you.
@perfikalgarve5 ай бұрын
I have been searching for weeks and couldn't find the same problem, I changed the MAF. Map, EGR Valve and solenoid, Swirl Flaps and actuator and still had the same problem. I checked all the intercooler hoses for leaks, no issues, but the problem remained, until I finally checked the solenoid for the Waste Gate actuator and found a bad connection, I tested the car and BINGO
@evosgarage5 ай бұрын
Man, I'm so happy to hear you got the car running property again😁🤜🏼🤛🏼
@user-dj6pi1wy9b6 ай бұрын
How can I get to you to work and my BMW 2008 550i?
@alentrevor6 ай бұрын
Hi, i want to connect a led red strip to my break light where shpuld i connect the 2 wires to. Thanks
@g95t20006 ай бұрын
Shouldn’t the original studs be flush with the spacer
@evosgarage6 ай бұрын
Hi mate! They don't have to be because if you notice all wheels have pockets machined in those areas to accommodate for this. 👍🏻 thanks for watching 🤜🏼 🤛🏼
@chrisbasheer75416 ай бұрын
Cheers man, was having the driver's window stop working sometimes, found your vid & copied your fix (same pin too).. all good now, thanks 👍
@evosgarage6 ай бұрын
Man, so happy to hear it worked for you too! Thanks for letting me know🤜🏼🤛🏼
@Leo707806 ай бұрын
Where did you get that push down part from . Great video by the way .
@evosgarage6 ай бұрын
I got it from Mercedes!🤜🏼🤛🏼
@pingbot2616 ай бұрын
Woah! what are those vacuum bags for the dyson? are they 3d printed or can you buy it somewhere?
@evosgarage6 ай бұрын
What I was printing in this video was some hiding covers for aftermarket camber plates for the bmw e36 suspension towers. Thanks for watching 🤜🏼🤛🏼
@Lostwayz2237 ай бұрын
Planning on putting 20mm wheel spacers on my 2001 gs300 with 17x7 wheels do you think I will rub ?
@evosgarage6 ай бұрын
It won't rub bro! It's fine!👍🏻
@raresgeorgeroca85387 ай бұрын
Hello, can you please send me the link to the fuel pump you bought ? thanks!
@evosgarage7 ай бұрын
It's a Walbro 255. I'll see if I can get you a link.
@evosgarage7 ай бұрын
Something like this! www.ebay.co.uk/itm/125493987297?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8RQ_zxjPREa&sssrc=4429486&ssuid=kEaaQKCKR9C&var=&widget_ver=artemis&media=COPY
@raresgeorgeroca85387 ай бұрын
Thanks a lot! 🎉
@KINGRG17 ай бұрын
A word of caution.. The Toyota FSM states never to use any abrasive sheets to clean the inside of the knuckle bearing bore nor the wheel hub. You DO NOT want to remove or shave any material in those areas as the wheel bearing and wheel hub are both interference fit..
@BonoMoran8 ай бұрын
What’s the top torque spec on middle tower nut
@evosgarage8 ай бұрын
Unfortunately I couldn't find that info so I just torqued it by hand until it felt like it wasn't going anywhere.👍🏻
@BonoMoran8 ай бұрын
@@evosgarage found it 28 pounds! 38nm
@evosgarage8 ай бұрын
@BonoMoran nice one mate! Thank for sharing with us!🤜🏼🤛🏼
@BonoMoran8 ай бұрын
@@evosgarage question my clicking knob is just turning on top! For soft ad hard when I try to make it soft it doesn’t click!??
@evosgarage8 ай бұрын
I'm almost 100% it should click for both sides!
@Ilan-Aviv8 ай бұрын
This is a really good tutorial!!! Especially for those who just start using ABS and find that it floats over the bed like a snowboarder :) A few questions if anyone can answer please: Is a glass bed suitable for ABS? (My magnetic pad doesn't hold the ABS right now) I put my ABS in acetone for 30 minutes and it didn't melt. It gets softer and that's it. I just received this wire and it says on the package: "CR-ABS". I hope it's not some weird ABS compound. Any advice would be appreciated.
@evosgarage8 ай бұрын
Yeah the glass bed works very well with abs. I had no problems. You either got some weird abs mix or your acetone is not strong enough I would say. Wish all the best 👍🏻
@xxxclusv8 ай бұрын
Hello, I have a r32 gtr thats been converted to LHD. now the issue is i still use the original mirrors and the one thats now on the passenger side does not fold far enough, so I can't see. Do you have ideas on what I can do? I was told the s13 240sx mirrors in the US would fit the same but they dont have the folding function. Perhaps I could just buy a used lhd mirror and change out the mirror actuator inside? What do you think?
@evosgarage8 ай бұрын
Yeah, you can do that! I think it's probably going to work👌🏼👌🏼
@xxxclusv8 ай бұрын
@@evosgarage ok cool, ill give that a go
@evosgarage8 ай бұрын
@xxxclusv let me know if it worked! In the meantime I'm going to ask one of my friends who converted his r32 to lhd to see if I can find what has he done with his mirrors!🤜🏼🤛🏼
@xxxclusv8 ай бұрын
oh that would be awesome! @@evosgarage
@scottireland61168 ай бұрын
Just got mine out but cant get them off the plastic do they come off?
@evosgarage8 ай бұрын
You can heat the glue around the speakers and rotate it to free up the tabs and it comes off, sometimes it doesn't work because the glue is super old and hardened, 2nd method is using a thin flathead screwdriver and gently pry the speaker off the tabs! It doesn't matter is you break the tabs imo as aftermarket speaker won't slot in there anyway. I hope this helps you man🤜🏼🤛🏼
@scottireland61168 ай бұрын
Thanks for the quick reply ill give it ago🤞
@evosgarage8 ай бұрын
@@scottireland6116 no worries mate👌🏼
@grizzgaming36069 ай бұрын
Have you had any issues with top mounts sliding? The top hats don’t have the nipple to hold them in place and even torqued they’re just sliding back and forth on the factory “camber” adjustment .
@evosgarage9 ай бұрын
Sorry, as far as I'm aware no problems with that so far!👌🏼
@robinchestersson421310 ай бұрын
Grate vid, and sh to you for trusting that jack you used for the back
@evosgarage10 ай бұрын
😂😂😂
@user-bu1ir3us7v11 ай бұрын
bro don't you need to have a two-fuel line going for the fuel pump?, i have only one fuel line like yours and i bought a white fuel pump and top line is leaking due to not having any hose connected. Do i need to block one of them so fuel wont leak ?
@evosgarage11 ай бұрын
Different versions of the E36 will have different configurations of the fuel pump assembly, on my case one port is open and the other is closed from factory. I've seen other models that used both ports on the top.
@johnnydeutschemark3620 Жыл бұрын
Hello Brother~ Why didn't you take this opportunity to change the tea-bag looking filter? ..is that not an option? or is that NOT a filter? Great video, I hope I don't have to do this soon.. but if I do : Thanks!
@evosgarage Жыл бұрын
You don't have to replace it unless it's falling apart because it's only a plastic mesh. It only stops solid debris from going in the pump. You can clean it from inside out and it will be good as new, just put it back again. The main thing is it being clean!👍🏻
@ianhughes7824 Жыл бұрын
Really good vid thank mate
@evosgarage10 ай бұрын
Glad you enjoyed it🤜🏼🤛🏼
@matthewbombard7054 Жыл бұрын
Did you run into problems with wheel rubbing the coilovers??! My front wheels are rubbing and shredding my tires
@evosgarage10 ай бұрын
No because we were already running like 20mm wheel spacers.
@neekisheen6168 Жыл бұрын
Hey has anyone ran into the problem of their rims hitting these coilovers? I recently installed them on my e60 but I've got 19" hussla rims and was wondering if I done something wrong before I go buy new rims
@kiwiconnection3580 Жыл бұрын
Seems to be a common issue, get wheel spacers. Lots of them on sites like pelican parts. I'm watching these vids trying to figure out if my std 550i rims will hit.
@upton_ogood Жыл бұрын
Very helpful thanks.
@dawidgogacz Жыл бұрын
how are the coilovers holding up? still running good?
@user-jg5ck8io6y Жыл бұрын
could someone help w210 270 cdi when I start the car it won't go over 3000 rpm, only after about 20-30 minutes of driving it starts working and pulls normally
@GreySectoid Жыл бұрын
Great instructions, have you tried printing PETG on it? Considering getting myself a glass bed as well.
@evosgarage Жыл бұрын
Hi! Unfortunately I haven't tried printing PETG yet! Maybe in the future!
@BusyRaf Жыл бұрын
THANK YOU! Need to replace my Walbro HPFP tomorrow and this is very helpful.
@evosgarage Жыл бұрын
I'm glad it helped you 🤜🏼🤛🏼👌🏼
@r0bb3rse Жыл бұрын
Great vid! Thanks alot.
@Overath12 Жыл бұрын
Buenas tardes, encontré un video suyo en otro canal. Le dejo el titulo del video "Bunyi kasar pada Bagian depan kiri mobil Bmw,ganti Laher Roda."
@shaunmcclory8117 Жыл бұрын
My 2002 c220cdi has this as an intermittent prob, pull over turn off start again its fine!...till next time🙄
@evosgarage Жыл бұрын
Hi mate! I would suggest you get the codes scanned with a cheap Bluetooth obd2 reader. That's likely to point in the right direction and it might be something very simple to solve!👌🏼 It seems the ecu going into limp mode and there must be a good reason for it but it can be something simple as MAF sensor for example.
@shaunmcclory8117 Жыл бұрын
@@evosgarage ok thanks although i have a more pressing issue with it at min, it is stuck in nuetral wont go in reverse or park, sort of half goes into drive but not as far as normally lever should go but at least i can move it forwards, i have just bought a used lever and gear selector and 🤞 that will sort it
@shaunmcclory8117 Жыл бұрын
Hi quick update which may be of help to others in future, i replaced the gear shifter module with a second hand unit as three diff sources said it would not need programming on a2002car WRONG! A nightmare time with lots of issues (stuck in 1st, no reverse saying R when im driving!.stuck in 4th..and others!) Took it to a magic auto elec who took all the "brains" out of my old shifter and put them in the new one and it is now working fine after a week👍 now its pouring black smoke and loss of power though🙄 bloody vehicles eh😅
@ramonbs6075 Жыл бұрын
Nice video! What's your experience with this engine? is it worth it above the 3.2l petrol/gas engine?
@evosgarage Жыл бұрын
If I could choose I would prefer the 3.2 inline 6. The engine from the 320CDI.
@ramonbs6075 Жыл бұрын
@@evosgarage ok. But between the 270cdi and the 3.2l v6 petrol/gas?
@evosgarage Жыл бұрын
@ramonbs6075 unless you live in dubai or the USA I would recommend the 270CDI as the 3.2 v6 is known to be veeeery thirsty😉
@torriebrown2321 Жыл бұрын
Was your car awd
@evosgarage Жыл бұрын
No, it was RWD!👍🏻
@matthewbombard7054 Жыл бұрын
Did this set come with struts? Like all as one set?
Пікірлер
Like your videos you are very good at problem solving , helped me heaps thanks 👍 P. S . what is the Part called under the Accelerator Pedal ?
Thank you mate! I'm glad it helped you! 🤜🏼🤛🏼 it's called kick down switch. When you press the accelerator all the way down, that switch sends the signal to the automatic gearbox computer to start shifting down the gears in order to increase speed faster.
Well done!
So i followed this video to a Tee and my 10amp tail light breaker pops after 15-20min of running the car with the lights on ...so cant say that this mod is 100% . Unless the video creator has a solution for my constant popping breaker
Hi mate. Not sure what's the problem in your car but I can tell you I've had this mod in my car for years now without any issue and my mate did the exact same on his aristo and never had any problems. I assume there's a problem with the wiring in your car because I've never heard about anyone else with the same problem before. 👍🏻
@@evosgarage assuming would make an A$$ out of you and me...there's no problem with my wiring I've been wiring cars for 10 years I'll chalk it up to it being a GS400 anf being slightly different...I followed the club lexus write up and have had no issues since.
I'm glad you managed to sort your problem. I don't know about the specifics for the gs400 as I've never owned one so I wouldn't be able to troubleshoot your problem in the youtube comment section without having the car in front of me, I've only worked on the gs300 and the aristo.
What size are the spacers 20 or 25mm I have the same set up but wondering if I could get away with 25 30 mm spacers
They are 20mm but there's still space, I'm sure 30mm will be fine and look even better
Cheers man I’ve ordered 25mm not sure I trust 30s might be to big on the fronts I’ll let you know how I get on dude keep up the good content man
No worries mate! Thanks for watching 🤜🏼 🤛🏼
I have these on my e60 and in the medium stiffness they feel good. But too soft or too hard and they ride like crap. Find that middle ground, get ur height to how u want it and go nuts!
True, it's all about finding the sweet spot!🤜🏼🤛🏼
Works great 👌, thanks alot saved me around 150€
No worries Finn! I'm glad it helped you!🤜🏼🤛🏼
Dommage j'ai acheté les mêmes suspensions et ça ne va pas sur la 525 xi e60
That's sad man😪
thank you!!
No worries! Happy to help mate🤜🏼🤛🏼
I have the same problem with my 2009 C c220 cdi. Only after its warmed up and engine under stress, something happens, no kick down and won't go over 3000rpm.....I will attempt to change the MAF sensor and let you know.
Hi mate! Do it, it will probably fixed your problem! Thanks for watching 🤜🏼 🤛🏼
Ik heb luchtvolumesenso vervangen en is opgelost
Good to hear you managed to solve your problem 😁🤜🏼🤛🏼
Run the magnetic bed at 60 set but them don’t last long for me only two times after that did not matter how much glue you used so I will go to glass bed
Go to the glass bed, you won't regret it!👍🏻
Do you use a certain type of soder for the board? Good video
I've used low melting point solder wire, makes it easier to solder the components on the board.
Hi, how are the coylovers feeling? Is the car tougher than on the msport suspension?
❤ bro. This video just game me the confidence to do the repair myself!!
I'm glad to hear that! 😁 I hope everything goes smooth for you!🤜🏼🤛🏼
So satisfying to watch
Thanks for watching 😁
Can you make some video on how to make inner fog lights to light up when you brake like US cars? Thank you.
I have been searching for weeks and couldn't find the same problem, I changed the MAF. Map, EGR Valve and solenoid, Swirl Flaps and actuator and still had the same problem. I checked all the intercooler hoses for leaks, no issues, but the problem remained, until I finally checked the solenoid for the Waste Gate actuator and found a bad connection, I tested the car and BINGO
Man, I'm so happy to hear you got the car running property again😁🤜🏼🤛🏼
How can I get to you to work and my BMW 2008 550i?
Hi, i want to connect a led red strip to my break light where shpuld i connect the 2 wires to. Thanks
Shouldn’t the original studs be flush with the spacer
Hi mate! They don't have to be because if you notice all wheels have pockets machined in those areas to accommodate for this. 👍🏻 thanks for watching 🤜🏼 🤛🏼
Cheers man, was having the driver's window stop working sometimes, found your vid & copied your fix (same pin too).. all good now, thanks 👍
Man, so happy to hear it worked for you too! Thanks for letting me know🤜🏼🤛🏼
Where did you get that push down part from . Great video by the way .
I got it from Mercedes!🤜🏼🤛🏼
Woah! what are those vacuum bags for the dyson? are they 3d printed or can you buy it somewhere?
What I was printing in this video was some hiding covers for aftermarket camber plates for the bmw e36 suspension towers. Thanks for watching 🤜🏼🤛🏼
Planning on putting 20mm wheel spacers on my 2001 gs300 with 17x7 wheels do you think I will rub ?
It won't rub bro! It's fine!👍🏻
Hello, can you please send me the link to the fuel pump you bought ? thanks!
It's a Walbro 255. I'll see if I can get you a link.
Something like this! www.ebay.co.uk/itm/125493987297?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8RQ_zxjPREa&sssrc=4429486&ssuid=kEaaQKCKR9C&var=&widget_ver=artemis&media=COPY
Thanks a lot! 🎉
A word of caution.. The Toyota FSM states never to use any abrasive sheets to clean the inside of the knuckle bearing bore nor the wheel hub. You DO NOT want to remove or shave any material in those areas as the wheel bearing and wheel hub are both interference fit..
What’s the top torque spec on middle tower nut
Unfortunately I couldn't find that info so I just torqued it by hand until it felt like it wasn't going anywhere.👍🏻
@@evosgarage found it 28 pounds! 38nm
@BonoMoran nice one mate! Thank for sharing with us!🤜🏼🤛🏼
@@evosgarage question my clicking knob is just turning on top! For soft ad hard when I try to make it soft it doesn’t click!??
I'm almost 100% it should click for both sides!
This is a really good tutorial!!! Especially for those who just start using ABS and find that it floats over the bed like a snowboarder :) A few questions if anyone can answer please: Is a glass bed suitable for ABS? (My magnetic pad doesn't hold the ABS right now) I put my ABS in acetone for 30 minutes and it didn't melt. It gets softer and that's it. I just received this wire and it says on the package: "CR-ABS". I hope it's not some weird ABS compound. Any advice would be appreciated.
Yeah the glass bed works very well with abs. I had no problems. You either got some weird abs mix or your acetone is not strong enough I would say. Wish all the best 👍🏻
Hello, I have a r32 gtr thats been converted to LHD. now the issue is i still use the original mirrors and the one thats now on the passenger side does not fold far enough, so I can't see. Do you have ideas on what I can do? I was told the s13 240sx mirrors in the US would fit the same but they dont have the folding function. Perhaps I could just buy a used lhd mirror and change out the mirror actuator inside? What do you think?
Yeah, you can do that! I think it's probably going to work👌🏼👌🏼
@@evosgarage ok cool, ill give that a go
@xxxclusv let me know if it worked! In the meantime I'm going to ask one of my friends who converted his r32 to lhd to see if I can find what has he done with his mirrors!🤜🏼🤛🏼
oh that would be awesome! @@evosgarage
Just got mine out but cant get them off the plastic do they come off?
You can heat the glue around the speakers and rotate it to free up the tabs and it comes off, sometimes it doesn't work because the glue is super old and hardened, 2nd method is using a thin flathead screwdriver and gently pry the speaker off the tabs! It doesn't matter is you break the tabs imo as aftermarket speaker won't slot in there anyway. I hope this helps you man🤜🏼🤛🏼
Thanks for the quick reply ill give it ago🤞
@@scottireland6116 no worries mate👌🏼
Have you had any issues with top mounts sliding? The top hats don’t have the nipple to hold them in place and even torqued they’re just sliding back and forth on the factory “camber” adjustment .
Sorry, as far as I'm aware no problems with that so far!👌🏼
Grate vid, and sh to you for trusting that jack you used for the back
😂😂😂
bro don't you need to have a two-fuel line going for the fuel pump?, i have only one fuel line like yours and i bought a white fuel pump and top line is leaking due to not having any hose connected. Do i need to block one of them so fuel wont leak ?
Different versions of the E36 will have different configurations of the fuel pump assembly, on my case one port is open and the other is closed from factory. I've seen other models that used both ports on the top.
Hello Brother~ Why didn't you take this opportunity to change the tea-bag looking filter? ..is that not an option? or is that NOT a filter? Great video, I hope I don't have to do this soon.. but if I do : Thanks!
You don't have to replace it unless it's falling apart because it's only a plastic mesh. It only stops solid debris from going in the pump. You can clean it from inside out and it will be good as new, just put it back again. The main thing is it being clean!👍🏻
Really good vid thank mate
Glad you enjoyed it🤜🏼🤛🏼
Did you run into problems with wheel rubbing the coilovers??! My front wheels are rubbing and shredding my tires
No because we were already running like 20mm wheel spacers.
Hey has anyone ran into the problem of their rims hitting these coilovers? I recently installed them on my e60 but I've got 19" hussla rims and was wondering if I done something wrong before I go buy new rims
Seems to be a common issue, get wheel spacers. Lots of them on sites like pelican parts. I'm watching these vids trying to figure out if my std 550i rims will hit.
Very helpful thanks.
how are the coilovers holding up? still running good?
could someone help w210 270 cdi when I start the car it won't go over 3000 rpm, only after about 20-30 minutes of driving it starts working and pulls normally
Great instructions, have you tried printing PETG on it? Considering getting myself a glass bed as well.
Hi! Unfortunately I haven't tried printing PETG yet! Maybe in the future!
THANK YOU! Need to replace my Walbro HPFP tomorrow and this is very helpful.
I'm glad it helped you 🤜🏼🤛🏼👌🏼
Great vid! Thanks alot.
Buenas tardes, encontré un video suyo en otro canal. Le dejo el titulo del video "Bunyi kasar pada Bagian depan kiri mobil Bmw,ganti Laher Roda."
My 2002 c220cdi has this as an intermittent prob, pull over turn off start again its fine!...till next time🙄
Hi mate! I would suggest you get the codes scanned with a cheap Bluetooth obd2 reader. That's likely to point in the right direction and it might be something very simple to solve!👌🏼 It seems the ecu going into limp mode and there must be a good reason for it but it can be something simple as MAF sensor for example.
@@evosgarage ok thanks although i have a more pressing issue with it at min, it is stuck in nuetral wont go in reverse or park, sort of half goes into drive but not as far as normally lever should go but at least i can move it forwards, i have just bought a used lever and gear selector and 🤞 that will sort it
Hi quick update which may be of help to others in future, i replaced the gear shifter module with a second hand unit as three diff sources said it would not need programming on a2002car WRONG! A nightmare time with lots of issues (stuck in 1st, no reverse saying R when im driving!.stuck in 4th..and others!) Took it to a magic auto elec who took all the "brains" out of my old shifter and put them in the new one and it is now working fine after a week👍 now its pouring black smoke and loss of power though🙄 bloody vehicles eh😅
Nice video! What's your experience with this engine? is it worth it above the 3.2l petrol/gas engine?
If I could choose I would prefer the 3.2 inline 6. The engine from the 320CDI.
@@evosgarage ok. But between the 270cdi and the 3.2l v6 petrol/gas?
@ramonbs6075 unless you live in dubai or the USA I would recommend the 270CDI as the 3.2 v6 is known to be veeeery thirsty😉
Was your car awd
No, it was RWD!👍🏻
Did this set come with struts? Like all as one set?
Yes it did
Thank you !
It's one of the best DIY videos I've seen 🤘
Thank you! 🤜🏼🤛🏼 I really appreciate it