Salut din USA Alex. Ai un e46 foarte curat și ai vorbit forte bine și tehnic correct și informative în video. Plus a a foast good edit deci mult succes inainte cu video și canalul tau. Îmi plăcea sa vad real car enthusiasts mai ales acasă în tara mea. Salut încodata din Seattle USA

@alexTXA

2 жыл бұрын

Ma bucur foarte mult sa vad ca am urmaritori de peste ocean...speechless! Multumesc pentru cuvintele frumoase, o sa arate din ce in ce mai bine masina, bineinteles intr-o stare originala👍🏻toate cele bune!

How did you connect the lambda sensors? Aren’t they too short after mounting to the new manifolds?

@alexTXA

3 жыл бұрын

Hello, they are now sitting between the engine and cabin, on top of the gear box, they are safer over there, water can't reach! Good luck! 👍the lamda wire is short yes, but the connection cable is quite long

hello, the flange for the exhaust that you had made, had a conical shape as well? Did you use anything to help seal the exhast, like an exhast gasket?

@alexTXA

3 жыл бұрын

hello, no the flange is flat, i took the measurements befour mouting the headers, welded the pipe, and than grind the inside pipe till it became conical, it fits perfectly as you see in the video

@jpman54

3 жыл бұрын

@@alexTXA Yes, it fits really nice. I am having a issue trying to get a flange for the exhast. I am mounting the same headers on 323ci. Nice to hear that it was easy. But how did you grind it?

@alexTXA

3 жыл бұрын

João Paulo i took the diameter of the header cone, make the flange, weld the pipe, and than grind it inside, till it fit the half of the cone(3-4mm) over the header cone!

@jpman54

3 жыл бұрын

@@alexTXA Nice thanks. And what tools did you use too grind?

@alexTXA

3 жыл бұрын

João Paulo steel grinder, used for cylinder head

I thought u needed a tune after u go catless for no check engine light or is that why the pre bung o2 is there 🤔

@alexTXA

Жыл бұрын

yes, you need a tune, mine is custom!

Hi, did you have any problems whith gearbox clearance?

@alexTXA

Жыл бұрын

Yes, i had, but its something like 1-2mm, you can grind a little bit the side of ther gearbox, or hammer the headers a little bit👍🏻

Hey did you install bank 1 first? I am installing these on my car right now and installed bank 2 first and now I'm struggling to seat bank1. Thanks!

@alexTXA

Жыл бұрын

Yes, first bank1, its fu&@€@ng tight place🤯

@KM-ei3je

Жыл бұрын

@@alexTXA How did you fit bank 2 in after bank 1 is installed? I don't see how this is possible. I was able to get much closer (although not completely) going with bank 2 first.

@alexTXA

Жыл бұрын

@@KM-ei3je i’ve spend around 9 hours, you can get the right engine monut off, and you’ll have enought space

nice welding skills!

@alexTXA

Жыл бұрын

thanks, i love my welder!

Did you have to drop sub frame ?

@alexTXA

3 жыл бұрын

You can see in the video that i didn't drop it! If you want to have more acces to headers, drop the passenger side engine mount!!! 👍

did you delete post cat o2?

@alexTXA

3 жыл бұрын

Yes, i deleted them!

Haha, ce tare :))), abia ce mi am luat un compact 3.0i din Craiova si vreau sa i pun serpi si un 'kit lsd' racing diffs si vad ca tu ai facut ambele chestii.. te invidiez pt pretul pe care l ai prins la serpii aia, imi lasi un contact sa ti mai pun o intrebare daca e cazul?? Merci si spor in continuare, mai baga clipuri daca ai cum ca sigur mai sunt doritori 🍻

@alexTXA

3 жыл бұрын

Salutare! Multumesc pentru aprecieri, in ceea ce priveste pretul serpilor si al kit-ului de la racingdiffs, mai ai putina rabdare, nu mai e mult pana la black friday! Daca ti-a placut video, apasa subscribe...urmeaza si altele!

Așteptăm sunetul de la niste accelerări in forță. 👍🏼

@alexTXA

3 жыл бұрын

coming soon!!!

@alexTXA

3 жыл бұрын

kzread.info/dash/bejne/Y4R32MqDmbO7ftY.html versiunea finala!

serpii sunt versiunea de 200€ sau cea de 700€?

@alexTXA

3 жыл бұрын

196 au fost mai exact, iar ca “serpi” nu pot fi altfel decat “serpi” ce vezi tu acolo cu 700, sunt serpi+catalizatoare👍🏻

What you do with lambda sensors?

@biogame01

3 ай бұрын

The first remain in place, the second 2 are turned off by software.

No heat shield? No termo isolation?

@alexTXA

3 жыл бұрын

Hello, even Schmiedmann on their 330i with kompressor 300+hp, didn't wrap the headers, no problem without thermal protection!

@subru3285

3 жыл бұрын

​@@alexTXA I also have this schmiedmann headers in e46. I have them near 2 years. I'm considering to wrap headers because of IAT during summer.

@alexTXA

3 жыл бұрын

subru328 i don't race the car, its more daily, and its ok👍

@alexTXA

3 жыл бұрын

subru328 NOTE! If you wrap them, in time they will crack! Beacause you block the heat transfer!

@subru3285

3 жыл бұрын

Alex TXA thanks for reply 🙂

Do you need to tune it?

@alexTXA

Жыл бұрын

yes, i have a custom tune up to 7000rpm

Can't here shit, when I turn max volume, then music play and my ears bleed 😒

@alexTXA

3 жыл бұрын

😂hello, untill now, you’re the only one...and i speak romanian, do you know the language!?

@TheMeginieks

3 жыл бұрын

@@alexTXA I'm not that good at english :D sorry bout that hope you understand me 😂

@TheMeginieks

3 жыл бұрын

You talk so quite and music is too laud you need to find balance between volume difference.

@TheMeginieks

3 жыл бұрын

@@alexTXA and now I fugured out u ask bout rumanian language sorry but no 😲😄

@alexTXA

3 жыл бұрын

@@TheMeginieks ok, thank you👍🏻