I have found that if you heat the parts up with a blow-dryer BEFORE applying the bluing solution, a more uniform, deep finish is acquired.

@RobertCowanDIY

2 жыл бұрын

Huh, interesting. I'll have to try that!

@iamfree3150

Жыл бұрын

A heat gun would work to

@davidmontgomery9570

Жыл бұрын

I saw a restoration video on a winchester model 1906, I just got one. They heated the parts with a hair dryer before bluing. I guess the metal expanda with heat and soaks in the solution better.

@illecebris8709

Жыл бұрын

Thank you Jim for the info!

@flyback_driver

Жыл бұрын

Bluing is a form a oxidation so heat will increase the speed of the reaction. The same reason why the hotter you heat steel before quenching in oil the better results you have. This is the case for any chemical reaction more heat will increase the amount of reactions taking place.

Thank you for this. I've watched several other cold-bluing videos and they really don't explain anything as easily and clearly as you do.

Thank you for clearly presenting the most effective way to get good results

Very helpful in prepping diecast parts for bluing and nickel plating!

great straight forward demonstration.

Nice and thanks, I tried it decades ago when haste was a close friend! I now realise and have been aware for a while any surface finish is very dependent on preparation. I got similar results but definitely a bit more ‘blotchy’

Just cold blued an Old Air rifle and it went Perfect, this tutorial is just good and simple, and it worked just like magic

@dougie1110

Жыл бұрын

does it scratch easily?

@thegrassyknoll7792

Жыл бұрын

@@dougie1110 yes but so do regular bluing i think, the rust prevention is not so good as regular bluing, but its only a Air rifle kept in a holster and only used as family intertainment, and i keep it Well oiled

@aaronmiller7954

5 сағат бұрын

​@@thegrassyknoll7792entertainment*

Thanks for this helpful, clear video! I used it to darken and dull the finish of a couple of shiny steel gate latches, because the glare off of them was giving my wife migraines whenever she looked at them. I decided to skip the last step with oil, since the dull finish was preferred.

Thank you for the concise and thorough explanation of the process of using this product. It looks like the results I am looking for. :)

Awesome tutorial, thank you

I finally got to cold blueing the top of my double coocker who has an exposed steel surface on half of the surface with the possibility of placing a wok on an intense burner. I was sick and tired of having rust and residual rust black speckles on that surface. So I just sanded the surface, applied the acetone and cold blued it. Now I will keep the oil on until this evening. Happy with this tutorial. Thanks.

Very nice concise demonstration of cold bluing! And, as usual, very high production values make watching a pleasure.

@RobertCowanDIY

2 жыл бұрын

Glad you enjoyed it!

I just did this on a Ruger 1022 I am restoring and it looks amazing! Thank you for the tutorial!

@RobertCowanDIY

2 жыл бұрын

Nice!

Cold blue is amazing. I built a shoulder strap jig for one of my 15s, and for a brief second thought about using paint on one of the chrome looking links. I caught myself and went to the cold blue and INSTANTLY got the results I was needing and wanting. Don't have to worry about it rusting or paint wearing off now. Also had a rifle suffering some minor barrel rust, and I sanded the spots down and re-blued them. They havnt re-rusted since.

Great Video...I actually did a German Mauser K-98 a few years back and the result was amazing. The process is very easy. Good job on the parts. Thanks for the reminder fresh up course.

Awesome video! Thanks for sharing.

Unsung hero of the combots community

About to do a Hi-power I was fixing up thx for making it quick and simple

Great video. Thanks for posting

Thanks for the instruction!

I find that if you clean the part with acetone, heat in a 350° oven for 45min, clean with acetone again, heat to around 250°, apply 1 coat of bluing, let dry, reheat to 250° reapply bluing then heat once again and apply a thin coat of oil such as WD40 or gun oil, you will get a heavier and more durable finnish that will last for years with regulat coats of light oil

@jtcmlt1

Жыл бұрын

I really don't know about this process, but he said that the blueing was not painting the surface, instead was creating a reaction on the metal surface. If that is true, how can it get better by adding more layers? For starters, the metal would be sealed with the first layer and the reaction would have already happened. It sounds to me like the oxidation of aluminum. Please enlighten me. I really don't understand.

@murphine969

Жыл бұрын

Try MEK (Methyl Ethyl Katone) that what most people use and you won’t need heat for that process I think.

@csm5040

Жыл бұрын

@@jtcmlt1 The original commenter was referring to “hot” bluing and it is different from “cold” bluing, which is the method used in the video. You can learn more about bluing in its corresponding Wikipedia page: “Bluing (steel)”

@csm5040

Жыл бұрын

@@jtcmlt1 en.m.wikipedia.org/wiki/Bluing_(steel)

@jtcmlt1

Жыл бұрын

@@csm5040 Thank you

I just had my first experience re-blueing my firing pin and some retaining pins inside the bolt of my rifle so I can see the wear pattern better in the future. Your tip of letting it soak in oil for a bit made a huge difference, thank you!

@RobertCowanDIY

5 ай бұрын

You're welcome!

Now i know what i did wrong when blueing vintage machine parts. Thank you for sharing! 🤝

Great tutorial.

Спасибо за ваш труд, очень просто и понятно ;)))

One thing not mentioned is the FACT that the biggest contributor to the finish is the surface prep. The better you prep, the better your results will be. Buff that part!

@carfvallrightsreservedwith6649

Жыл бұрын

DEGREASE that part!

@TIGmoto

Жыл бұрын

@@carfvallrightsreservedwith6649 that comes with surface prep

I've used cold blue for decades, and am very satisfied with the results.

@chrisneves1274

Жыл бұрын

Do I have to heat the metal for better results ? I read some ppl recommend it

@christianmonkelbaan3537

Жыл бұрын

Do you find that it keeps smelling? I have that issue after having applied and rinsed off the excess. I haven't used baking soda.

TIP : if you heat it up - ie: warm the metal some, this opens the pores a bit and the cold bluing agent will have better penetration.

@RobertCowanDIY

Жыл бұрын

Ah nice trick.

Thank you!

Thanks for the video. Great to know the process!

Thanks for the awesome easy to understand video

@RobertCowanDIY

6 ай бұрын

You are welcome!

Me sirvió de ayuda .gracias

This is AWESOME

THANK YOU

Thank you!!!

Looks like great stuff Ill give it a try

@RobertCowanDIY

11 ай бұрын

Yeah, it's easy and cheap!

Great video

Outstanding

Great video. I got this.

Thanks man I’m going to do it!👊🏻

@RobertCowanDIY

9 ай бұрын

Good, go for it!

You are the best I've seen, instructional speaking. Explaining along the way, the simple, straight forward method, including the oil at the end. I've used this stuff before, I've never wire-wheeled it. Later today, I'm going to try it on a Taurus G2C. Wire wheel to oil. It certainly appears that this will bring this archaic relic into the 21st century.

@paulis7319

Жыл бұрын

How did the G2C turn out with the cold blueing? I'm currently in SDI and we're in the Firearms Finishing semester, and I'm wanting to re-blue my Colt National Match 1911. Right now I'm trying to decide which process to use because it's a family heirloom and I want it to look like brand new again.

@ardevenuta37

Жыл бұрын

@paulis7319 Well, I took the slide down to bare metal. I did it as carefully as I was able. After getting down to the bare metal, I coated the slide several times. It came back to life, and all the signs of holster-ware were gone. That Saud, it left an uneven shading despite my best efforts to apply the solution evenly. After another couple of coats, I was able to somewhat smoothe the dull black, so thst it looked evenly applied. I will say that I had new night sights, and when the solution made contact with the sites, the black color ran onto the glow dots. Retrospectively, I'd remove sites; but to me, it seemed to defeat the purpose of fast, removing holster-ware. Next, I soaked the slide in vegetable oil a few hours, and sure enough, most of the dullness brightened up. Certainly, nowhere near factory original. I also noted a week out that where the stamping on the slide is, began to turn brown, as if rust was beginning to develop, kind of a brownish haze. I then reapplied the solution to that area (after being mortified). It solved the issue for now, at least. At the end of the day, I wasn't then, nor am I impressed with the outcome. I'm not sure repeating the process would be anything else but futile. This G2C has some personal meaning to me. Ordinarily, I'd just have salvaged it for parts. I may go all out, and either cammo cover or just have it restored to factory by a gunsmith, which I am not. (Lol). Congrats on SDI, I've considered it, as has one of my sons. Please, let me know how that's going, the quality of lessons, etc. Thanks!

@wth......53

7 ай бұрын

I have a Taurus g2c I love mine I'm also going to redo mine as well I'm going heat treated on this one though, I bought my used had a hell of a time sighting in after about 3 hours and 130 rounds later I finally got it.

@wth......53

7 ай бұрын

​@@paulis7319I would not go cold blueing on that I would hot, it's a hell of a process but in the end the finish there's nothing like it, I've never done it before but I've seen it done and it's amazing especially with what you said you're getting ready to work on any idiot can cold blue but not a lot of people can hot blue that's what I'd do go online and look at pictures of some of them it's amazing the difference is incredible

@wth......53

7 ай бұрын

​@@ardevenuta37my God I wish you lived close to me cuz I do it for nothing I'm really good at blueing I've been doing it my entire life and I'm 53 first gun I ever did I was 8 years old 1978. And the fact that we both have the G2C I think it's pretty cool

A couple of things need to be mentioned here as a warning. Birchwood Casey cold bluing solution will likely create a nasty metallic rotten egg smell on the treated metal that doesn't seem go away although will lessen over time to some extent. Even though it's listed as odorless, when applying the solution a respirator in a well-ventilated area should be used as selenium dioxide is extremely toxic (inc. eye protection etc). Apparently Oxpho Blue doesn't have the smell problem, but I have not used it. I have looked high and low for a way to rid the metal of the odor with no luck other than sanding it back to bare metal. Wax and oiling help to some extent but the smell will linger on which most people find hideous. From what I've read it's likely caused by the copper sulfate derived in the application process.

Nice video, I heat the parts before bluing at 185 for an hour to cook all the moisture out before oiling and I tend to use 90 w oil or grease then heat with a torch to melt the grease into any pits or pores. Wipe off when cool then coat with regular oil

@RobertCowanDIY

5 ай бұрын

Ah nice. I'm sure that gives a more consistent finish.

Thanks man! I am going to go and blue the parts on my old Mosin nagant. Not an expensive gun so I will be able to learn alot about the process.

@RobertCowanDIY

Жыл бұрын

Nice!

@stevenbaker8184

Жыл бұрын

I'm getting ready to do the parts on an 1867 Danish Snider rifle. It's not worth much, and am learning how to do it myself

@wth......53

7 ай бұрын

Is that a 7.62 x 39 mosin?

@wth......53

7 ай бұрын

​@@stevenbaker8184I just did a buddy of mine's Remington 1912 or 1917 one of those two years I forget but it's a model pump-action 22 replace the trigger pin plunger, slide, the bolt, I put an antique finish on it. Took me a month I did it in my spare time.

@Silver_Bullet_Ballistics

3 ай бұрын

I'm doing that right now. Trying to make a restoration video for KZread

had to remove the blueing on my ruger security 9 ordering this tomorrow

Thx

@RobertCowanDIY

3 ай бұрын

No problem

Amazing Explanation! Thes liquid only works on steel or it works in iron too?

Great vid

@RobertCowanDIY

2 жыл бұрын

Thanks!

So gonna re finish my Lee Enfield's metal parts. So I did two lee enfields. Prepped both the same way but some of the parts came out black like this video but most came out gun matal gray.

Beatiful 😍👍

Thanks for the video. I have a knife that was blued by the maker and it looks fantastic. The problem is that the kydex sheath it came with has worn the bluing badly. Arizona Customs suggested this video. I want to try to re-blue it but I am not sure what to do with the pinned handles and prior coating. The last thing I want is some sort of mess. It is a nice Fred Perrin custom Street Beat and it was reasonably (not insanely) expensive. I also love Fred Perrin knives and I don't want to ruin its beauty.

@RobertCowanDIY

Жыл бұрын

Hum, unless you exactly match the existing finish it probably won't turn out great. Are you absolutely sure the original was blued? You might want to know if it was hot or cold blued. I looked up the knife and it appears to have a ceramic coating, which isn't the same as bluing. I would contact spyderco (they made it right?) and see what they say.

perfect video length for the amount of given information

@RobertCowanDIY

7 ай бұрын

Thanks!

I usually do several coats and buffing very lightly with real fine steel wool. Brings out a great smooth even shine Then I add oil. Just another way

@RobertCowanDIY

Жыл бұрын

Yeah, that's a bit more involved, but would certainly give you a better result!

@chriswilliams5268

Жыл бұрын

Right I think it depends on how dark you want it. Some weapons I do are antiques so less is more as I'm trying to match the patina of age. I do fire arms exclusively

I use extra vigrin olive oil for that extra oomph in shine. Only the best!!!

I acquired an Ontario M9 bayonet from a flea market that needs a bit of fixin' up!!! Already ran the parts through the ultrasonic cleaner and now soaking them in some Evapo-Rust overnight. Probably will scrub really well with a nylon toothbrush afterwards as I don't want to damage the original finish too much!!! Then probably wipe down with acetone & dry. Gun Blue will go on after that...maybe do a pre-heat. After the Gun Blue application, my final oil of choice will be Lanolin aka "Wool Wax" which is super tenacious and protects really well!!! I just wipe down with a piece of suede leather that has been impregnated with Lanolin. Wiped a Morakniv Garberg down with Lanolin as a test, and it looks *AMAZING!!!*

@RobertCowanDIY

8 ай бұрын

nice!

@wth......53

7 ай бұрын

I've heard that and I considered trying it is it really that good, for the wool wax also where would I get that? I would imagine any hardware store

Great video! Gonna do this to an old 6lb sledge head. Then i was thinking ill have a bottle left over so why not do a few knives i have lol. Would you happen to know if this will work on D2 tool steel?

Engine hardware? Most bolt heads are surface corroded but threads are like new (galv coated) after removal. If I treat the heads of the bolts in the way demonstrated, will they be able to put up with future abuse of being installed and removed without losing the surface bluing?

Very good ventilation is key, acetone fumes are highly toxic. It's very easy to give yourself a nasty fume headache.

@johncompton-ho1hd

4 ай бұрын

And beware of open flames!

Thank you sir for your time and making this video from time to time I always like to go on and see if anybody comes up with any new tips I've been blueing my whole life, only cold I am just recently getting ready to do the hot for the first time, the process is a little intimidating but I'm sure I'll pull it off hopefully it won't be one of those trial and error sort of things. Also I'd like to add I think your video by far is the most descriptive.THANK YOU SIR!!!

@RobertCowanDIY

7 ай бұрын

You're welcome!

Essa oxidação demora sair ao ter muito contato com o objeto oxidado ?

Great video , I’m planning on building stairs, and want this metal look, is it hard wearing , for feet to be walking on

Can you touch up a bad spot or do you need to do the whole barrel for uniformity?

nice video thanks. im going to try to cold blue my ccw firearm, its starting to rust alittle bit in the front. i carry appendix. seems like the front, hits my t shirt where i sweat alittle. the little bit of rust, is bugging the heck outta me ha. never did this but i bought this stuff this morning and thought i'd watch a few videos.. thanks again.

@stoegerstewie8351

2 жыл бұрын

What ccw / holster combo ? I sweat alot and kinda new..

Would this stuff work on alloy metals ??

Will the parts benefit from a second treatment of cold blueing before the oil step? Great video! Thanks for taking the time to produce it.

@kevinblanchard6652

2 жыл бұрын

Finish will darken if more is applied, to a point. The part will need to be carded in between applications though. 0000 steel wool works well.

How good of a idea would cold blueing be for raw steel parts to a coleman 502 single burner stove? Does heat affect it just want to know if I'm better off doing nickel plating

Will it wear off over time and need to be done again, or can it be removed?

Do people find that it keeps smelling after application and rinsing? FYI I have not used baking soda as an extra neutralizing agent, like I have seen people do. I did some googling and some say that the smell doesn't go away. What is your experience?

make sure you don't have any bare metal parts close to where you're cold bluing because you'll find a layer of rust on them the day after

The oil will absorb into the steel within a few seconds, residual oil will still be on the part even after you "wipe it off" or even rinse it off. So long as you don't grind it off or chemically remove it it'll be there for a long time. You do have to occasionally re dip the tools or parts in oil. But leaving them for a long time is in my opinion not necessary. But to each their own. Great video.

@RobertCowanDIY

Жыл бұрын

Fair. I've always left them in there and it works well. The next time I can try just an hour or so.

@FuriousTortoise

Жыл бұрын

I typically heat mine around around 200•F before the oil step. Why? It’s what mom always did with cast iron pans!

Exactamente cuánto tiempo te dura ati el pavonado en tu rifle

Im planning to blue my cromoly steel bike.Will it still corrode or rust? New subs here

Is Aluminum black the same thing as bluing?

Anyone know what actual color does perma blue, super blue and aluminum black after several application? I'm looking for something that could produce a really dark green or like a seaweed color..

Can you do this to silver tungsten?

Fine video thanks. Do you think this would work on the reeds of an accordion. They were rusty. Ive taken the rust off but theres still some staining and microscopic pitting you might call it. Please type in accordion reed plates and you should get some good inages for you to guide me on if its possible. Basically the reeds get moisture on them over the years by air being drawn into the instrument via the bellows. Im thinking that bluing them might slow the next rusting process down or even prevent it altogether. I dont think the bluing would alter the tuning of the reed. What do you think? Many thanks

You will get a better job if you heat the part. It doesn’t need to hot enough to burn you but warm.

what kind of steel brush u are using sir its not damaging the metal and its smoth

Does it work on chrome? Any similar thing available for chrome?

Does this work with stainless, or other chemically non-reactive steels?

Thanks for making & posting this. Nicely produced. I have an old (not $valuable except to me) Daisy BB gun. With Acetone & multiple grades of sandpaper it is now brite steel. Cost wise I'm thinking of doing your process. Except I don't have a trough, nor want to waste that much oil to cover it. Birchwood casey mentions something called Barricade rust prevention. Have you had experience with that ? Or are other means of oiling ? The everything kit is $22.50.

@oni_goroshi

Жыл бұрын

Any oil works. I like to use a mixture of motor oil and transmission fluid personally. You don't have to go nuts with it, just put a decent coat on the metal and let it sit. It also helps to warm it up with a heat gun or blow dryer first. That will allow the oil to penetrate deeper.

Does anyone happen to know if this will work on something chrome / nickel plated?

Great video sir. How long did you wait before placing the part in the water bowl to rinse off the excess? Thank you.

@RobertCowanDIY

Жыл бұрын

It's not a matter of timing. As soon as the reaction is done and it doesn't blacken any further, you can rinse it off. It doesn't need to 'soak', it's a chemical reaction.

Does this work for 'potmetal'? Zinc alloys, usually used in airsoft guns. I have sourced Philip's Gun Blueing which is the best you can get for potmetal blueing. My main concern is that a lot of videos use linseed oil and they heat the parts, which is a problem for me I would much rather not have to try that out.

I polish all my parts and it does improve the finish! Also, it will work on properly prepared brass and nickel-silver parts!

@RobertCowanDIY

Жыл бұрын

Nice, I should try polishing them first the next time I need to do this.

Hello, what brand of blue liquid do you use? thank you excellent video..

@RobertCowanDIY

2 жыл бұрын

Check the link in the description, this is exactly what I used: amzn.to/3lPDutS

What if, after you leave the stuff on oil, you repeat the process again adding a second layer.

Simple

This really should be called "chemical bluing". I've done many gun parts and a few whole guns using this method. It is not as good as rust bluing or hot salt bluing. It will not be as durable as cold rust bluing. I find cold rust bluing to be much better. It takes more time and a few more supplies, but the result is worth it. You will have to boil the parts/gun to turn the red rust into black rust, but it's not hot enough to change any heat treating. Midway USA has a pretty good video explaining what to do.

What im i supposed to do with the water?

I have an old framing hammer head I'm wanting to blue. Do you recommend this method or the hot method with a torch. It has a very handy magnetic nail starter feature on top of the head, I was afraid the heat may damage that but wasn't sure which finish method would be the best in terms of durability. Any advice or opinion would be greatly appreciated.

@iangrimes5860

Жыл бұрын

I'm definitely not a pro, but I would agree that heat could damage the magnet. Go with a cold blue method.

How we get thise itme in egypt?

So I want my 19x Glock slide cut for an optic but I do not want a cerakote job as I want to keep the oem 19x finish. I believe this product will allow me to brush a coat only the bare metal that was milled (under the red dot and iron sites) preventing the steel from rusting and allowing me to keep a oem slide finish?

@RobertCowanDIY

2 жыл бұрын

Yep, bluing is primarily used for guns, for this purpose. The actual finish might vary, unless it's the exact same process that was used previously. Most guns are blued by heat-quenching, but this will get very close. But you can always try it and sand off that area if it doesn't work out. Just mask everything off.

Hi, i am looking for the greyish look. So from what i understood, i dont need to apply the oil in the end, right?

@RobertCowanDIY

Жыл бұрын

I think it looks really patchy and ugly without the oil. You can try it, it's cheap enough.

Has anyone tried these on caliper hardware like Brembos?

Question on cold blueing, can you have different Colours. Like Red or Green, thanks. Good information today

@RobertCowanDIY

2 жыл бұрын

I don't believe so. I think its only black. It's a forced oxidation of the surface. You're looking for anodizing.

@fookingsog

8 ай бұрын

Now if it was Titanium metal, you could "anodize" just with the proper DC Voltage to get the color you desire!!!

I just tried it out on an old buttplate from a model1928 Thompson Submachine Gun that unfortunately had sat and rusted over the years. I am very impressed with the results! Shout out to the person who suggested coating-rinsing-drying then lightly buffing with 0000 steel wool to smooth out the finish, then after wiping, repeat coating-rinsing-drying until you have the desired shade before oiling. NOTE: The final oiling step will darken and smooth out the finish a little bit more - so don't go too crazy on the bluing coats. QUESTION: after wiping off the oil, it looks like there is some brownish discoloration in some areas? I was going to buff it a little, clean with acetone then recoat. Thoughts?

@boathemian7694

11 ай бұрын

Where did you get a Tommy gun??

@fredmcl3952

11 ай бұрын

I also just used it to re-blue a WWII era Model 1928 Thompson Submachine Gun buttstock slide which turned out great. One personal observation: this cold bluing process seems to produce better results in warmer temperatures.

@fredmcl3952

11 ай бұрын

@@boathemian7694 one more caveat; before you purchase a TSMG or any machinegun, you need to make sure owning and possessing it is legal in the state you live.

Nice job my friend 👍

@RobertCowanDIY

Жыл бұрын

Thanks.

MyMechanics likes this video.

@RobertCowanDIY

2 жыл бұрын

Yes! I've definitely watched several of his videos.

Nice video!! Does it matter what type of oil is used - i.e., kitchen vegetable oils, gun oils or engine oils?

@RobertCowanDIY

Жыл бұрын

Not really.

@oni_goroshi

Жыл бұрын

I like a mixture of motor oil and transmission fluid. It's super cheap when you consider price per ounce and is good enough for your vehicles engine to reduce wear and fouling.