Common Problems and Answers: 1. Where can i get project Files: Download project files and Bonus Content: crossmindstudio.gumroad.com/l/lZHjb 2. Extrude along normal doesnt work? Answer : Thing to keep in mind which i might not have mentioned is that, if you extrude using the gizmo(handle) which shown when using extrude tool then the different commands are going to work well. But even if extrude along normal or other mode is selected and you press E to extrue it would simply extrude with default option. Or you can use Alt+E and then chose the mode you need for extrusion and then you won't need to manually drag the handle. Also it depends on what kind of geometry you are using it on. If its a flat plane it would work the same. for Extrude along normal to work differently, you need a surface which have normals facing in different directions. try it on a sphere. 3. How to i add lights and render it out. Answer: Lights and Shading is discussed in later chapters. Chk the playlist ( description) and proceed to further chapters and you should be able to make render of your own by end of this series and much more :). 4. Unable to join two parts of dumbell with bridge command/ unable to see bridge command when two spheres selected. Answer. Bridge command can only be used to bridge two loops or edges of same mesh. For it to work you need to make sure that both spheres are joined (ctrl+j) and then try the command again.

@vfxjagjit

Жыл бұрын

when i go to add modifier and select subdivision then it disappear my cube , can you please help me?

@PikachuGameRBTC

Жыл бұрын

@@vfxjagjit same issue, had u find any solution mate?

@vfxjagjit

Жыл бұрын

@@PikachuGameRBTC no bro

@PikachuGameRBTC

Жыл бұрын

@@vfxjagjit i found it preferences - viewport - subsivision-off gpu

@foresightbloxdev2185

Жыл бұрын

@@PikachuGameRBTC yo did you guys finish the seris?

Even a paid course can't teach you in details like this. A big thanks for your hard work, patience and sharing this. Looking forward to more such sessions.

@CrossMindStudio

3 жыл бұрын

Much appreciated!

@__seytan__2.479

8 ай бұрын

help me here...@@CrossMindStudio

The best ever. I’m actually going thru these every night after work. These are the real Blender lessons, not doughnut guy. This makes the doughnut look like a joke.

@nothingnothing3211

Жыл бұрын

That's for sure. I started some 1.5 yr ago and stopped a year ago. In that period of 6 months I got some really liked photorelaistic renders on reddit. They got like 6.1k likes on 3 posts. Not too good but not bad thanks to good basics and full day practice.

@rahul-qm9fi

Жыл бұрын

@@nothingnothing3211 please share a link bro I'd like to see them.

@johndoremi3872

Жыл бұрын

hahahahahahha i was thinking the same thing. CrossMind is a true GURU Master !!!

@josh_rdgrs

Жыл бұрын

@@user-xq9tl1jq5t definitely agree, there are different tutorials that work for every type of learner. 👍

@chh9182

Жыл бұрын

What's your beef with donut guy, for starters, he uses a proper mic setup for his tutorials.

massive massive respect for you sir! cant believe this course is for free! stay blessed

@CrossMindStudio

3 жыл бұрын

Thanks

@nathelm8693

3 жыл бұрын

@@CrossMindStudio This course is amazing, I was tired of having these concepts purely explained. Nothing teaches a newbie like demonstration. Thank you!

@mastannaidu3266

3 жыл бұрын

same brother. he explain things soo caringly and with soo respect and detail , i love that !!!1

@nuffen

2 жыл бұрын

he is the best!

Other tutorials go too fast and do not stop to explain. This one is perfect for the absolute beginner, while introducing some subtle concepts. This guy is a gifted teacher. He deserves more subscriptions and likes. A very positive contribution to the genre. Well done sir!

@CrossMindStudio

2 жыл бұрын

Make sure you watch all seven days of this series. It will make more sense then.

Unbelievable amount of attention to detail. Only tutorial I found so far covered everything without confusing me unlike many of the big names in blender community.

@CrossMindStudio

3 жыл бұрын

Glad it helped! Welcome :)

@monles_yen

3 жыл бұрын

Exactly!!!!!

@Ab_obla

2 жыл бұрын

Yeah I agree

@siannit-rkl3594

2 жыл бұрын

Yes same

@steveedgell7484

2 жыл бұрын

@@siannit-rkl3594 Agree it's so accurately pitched at what you need to know most when you're using the software.

I'm only 40 minutes in and already feel like I could probably model anything. I'm professionally trained in Maya (finished training in 2011) and the way you explain hotkeys, and all the nuances of each tool, is amazing! Lots of tutorials just fly through it, help you get something made fast but with no real idea how it was made. This tutorial will actually plant brain seeds of skill that will ripple across time and space sprouting hundreds of thousands of 3D creators. Thank you CrossMind Studio!

I love how your tutorials feel like university lecture where it actually takes a week to fully process it. No other videos have this much depth and organization. Thank you so much putting everything together.

Literally this series is creating a whole new gen of 3D creators! -Thank you sir for an amazing series

@yug_prabhanjan

Жыл бұрын

true

this is the right tutorial series to be watched and contains every part of blender in details. a huge thanks to cross mind studios

@yasinsoomro6993

3 жыл бұрын

exactly what is my thouts

@mastannaidu3266

3 жыл бұрын

yessssss!!!!!!!

Congratulations 🥳 you made it through day 1. Now have a look around you in your room. Chances are by end of this day you will be able to model 70% of objects that you see around you. 🍻 take it slow and enjoy. Also a moment of silence for around 1.5 mil people who didnt make it to second chapter. Casuals😑

@koushikkonda1994

3 жыл бұрын

I looked around room. There are some people. Shall I include them in remaining 30% of objects?

@CrossMindStudio

3 жыл бұрын

Codebuzz yes also spiders if any

@koushikkonda1994

3 жыл бұрын

@@CrossMindStudio You are soo great that this free tutorial is very clean and clear like udemy course. Why don't you upload courses in udemy in future for advanced stuff? Your accent is very good that any one from the world with any accent can understand your tutorial.

@ak2000_

3 жыл бұрын

Extruding works on one axis only and its always blue exis extruding options except extrude to cursor . All does same thing extruding in on blue axis only

@lcraft4574

3 жыл бұрын

@@ak2000_ pleas try Alt+S after selecting the face.

3 years later - yet to find a Blender tutorial better than this one. Thankyou!

Just over 3 minutes in and you've already making the default monkey head object look like Mojo Jojo from Powerpuff Girls. This is the most amazing tutorial series on Blender ever.

@CrossMindStudio

Жыл бұрын

Thank You 😅 that came naturally And Mojo Jojo have one of the best villain story

Truly the best Blender course I've found! Thank you hundreds of times!

@CrossMindStudio

3 жыл бұрын

So glad you found it useful :) Tag me @instacrossmind on insta, i would love to see it. :)

I would say this is a better course for beginners than Blender Guru because it covers all aspects of Blender broadly. Both blender guru and and you are awesome.

@BCEamiteshkumar

2 жыл бұрын

yo

Dropping a comment just so more people can find these tutorials and hopefully do my part to support this channel as it is well deserved! What an amazing job you do here my friend, can´t thank you enough! Time to move to the 3rd tutorial.

@CrossMindStudio

3 жыл бұрын

Much appreciated!

I'm shocked RAW, FBI, GRU etc. aren't knocking on my door. How the hell I am getting such an extensive tutorial FOR FREE?!? Mad respect for you man!

I can't thank you enough ! At one moment you apologize for the noise outside but truly, i could watch your tutorials with all the noise of the world, the quality of it it's impressive and so generous of you. Can't wait to learn more from it!

@CrossMindStudio

Жыл бұрын

Thats so sweet of you 😅 Your priorities are aligned U will do good

Instead of using edge slide command , you can press G twice to move the selected edge. Quite useful. P.S. love your vids.

@hypnotizedcherrypie4425

3 жыл бұрын

nice one

@nathelm8693

3 жыл бұрын

Ahh, the student has become the master.

@user-uq6ic8pw8x

3 жыл бұрын

Thank you for the comment. For me pressing E and dragging on Z lines dint work. Only the face was moving up and down. Thanks a ton.

Wow! This course is awesome and I cannot even imagine how much work and preparation "behind-the-scenes" you put into this. Thanks!

1:11:46 I was stuck forever right here, not being able to BEVEL my edges. It turns out that somehow I pressed EXTRUDE at some point, and even though I didn’t extrude, apparently, that is enough to have moved the edge enough to not allow BEVELING. . After an exhaustive search on KZread, I finally found a guy that explained it. In EDIT mode press SPACE then type “MERGE” and select MERGE BY DISTANCE. Voila, you can now BEVEL edges again, thanks GOD.

Can't believe I'm just seeing this. Incredible series!

@krishnadevsinghchundawat5136

2 жыл бұрын

Truly awesome

@babtherex3799

2 жыл бұрын

It really helped, honestly this was how I started.

@babtherex3799

2 жыл бұрын

You are a great man, really love your tutorials. Lots of creatives on KZread to learn from hahaha😂 please continue helping us beginners

@KRi3GERGaming

2 жыл бұрын

Shoe modelling of this guy is another level❤️

Thank you for the video! Just finished up my composition and I really learned a ton. Excited for day 3!

Lol, I'm not even a beginner anymore and I obviously nothing he said is new to me, but I still watched everything just for the sheer quality of explanations, I'd always watch tutorials and art just to pass the time and also overall improve my creativity and I can say for a fact that this guy just gets it right....10/10 will definitely be recommending this to any of my friends who want me to "teach them blender"

I've tried learning blender from other videos but I keep dropping out because they were not easy to follow. This is the easiest I've seen so far and it looks like I'm going to complete the full course. The content delivery is superb and shows a lot of in-depth industry experience from the instructor. Many thanks for you making this free. I kind of feel guilty I'm getting all this for free.

I can't stress enough how much I appreciate this course! Thank you very much from the deepest parts of my heart! 🙌

These are one of the most complete introductory tutorials I've every seen, well done! Maybe not for complete beginners, but it's a very good reference for a lot of operations. I wish I could watch these last year when I started out with 2.8 haha. For me it took watching dozens of tutorials and weeks and months to collect the knowledge you share in these couple of vids. Pretty awesome. :) I have to point out a small thing - often times you say polygon, when really what you mean is quad. :) I'm not sure if you mentioned the J command, but it's my favorite one and it's worth showing, often times it's more convenient then grid fill when you want to fix ngons. Also, bridge edge loops can be found in the Edge menu. It automatically deletes the starting faces, so no need to delete those beforehand

@CrossMindStudio

4 жыл бұрын

Thanks Roth May be you will enjoy our next series about Content Creation in 3D which goes live this 15th. And yes i do make lot of mistakes while speaking but i find it hard to concentrate while working in 3D. So some words slip out wrong. I am working on it and more videos i am publishing i can feel improvement in myself. Cheers Don’t forget to subscribe and Share

@HUNrobar

4 жыл бұрын

@@CrossMindStudio I can't wait for the new series :) I'll definitely do the airplane and the product series as well. It's very nice to learn from a professional like you, thanks for your tutorials in general. :)

@mohitgothwal7006

3 жыл бұрын

Can u guys please tell me to draw doodles in edit mode like he did at around 12.00. Please🙄

@rinshinmurad5865

3 жыл бұрын

@@mohitgothwal7006 there tool called anotate

@matias88icim

3 жыл бұрын

@@CrossMindStudio Man we understand you perfectly. Everybody has his own accent and it's wonderful this way. So Thanks again for ur time. You and ur team are really simply fantastic. Great job!!!

Incredibly helpful videos... I'm glad you take the time to properly explain things and don't worry about the length of the video. Really thankful to you for your time. I can't wait to get through all of these, but I'm taking my time and making lots of notes, plus trying to practice. I knew nothing about 3d when I started, but I have no doubt that, thanks to your great instruction, I'll be able to do all the things I wanted to do when I decided to learn.

BEST blender course on youtube. BEST blender teacher ever!

This course is great! Makes it really easy to get used to Blender. Great work!

Mannn i love you! Providing free knowledge, you're better than most of the teachers i have met.

@CrossMindStudio

3 жыл бұрын

Thanks. Welcome.

I have been trying on and off to learn blender for the past couple of years and it has never stuck. I have managed more in the past few days of slowly going through your videos in between working on other projects then I have in my best couple of years of trying to figure out this program. This might actually be the time I actually do it because I found these videos that don't lose me entirely a few steps in. You are doing good work, you have helped me immensely and I will be sharing this course because I am not the only person I know struggling to learn blender.

Dropping a comment just so more people can find these tutorials and hopefully do my part to support this channel as it is well deserved!

12:14 if you want to stretch it smoothly in x direction but " G z " doesn't work, make sure your transform pivot point is set to "Individiual origins" or "Median point"

@curiousgaurav2628

2 жыл бұрын

thx bro

@AnhTran-gl1hp

Жыл бұрын

omg, right the spot that i got lost him, big thanks

@vickykods

Жыл бұрын

thank you so much man!!!! i have been stuck at this for 30min!!!

Anyone wondering where that line tool comes from, it's an annotation tool on the left panel (the pencil). And to delete it later, you need to press and hold D and drag with the right mouse button where you want to erase. Good luck.

@moviegold5004

3 жыл бұрын

Thanks man 😂😂 I was searching this . Are you a mind reader ?

@maiamaya6083

3 жыл бұрын

thank you :3

@gadgetivagadgets86

Жыл бұрын

Thanks man ,wont able to delete those lines, very helpful 👍

@Sunil_Dhansure

9 ай бұрын

Thanx a lot dude.... it really helped a lot

Its been couple of days since I was shortlisting courses on udemy, skillshare and youtube to start my journey with Blender until i found this channel. As soon as I browsed throughout the 7 days content, I finally knew that I have found what exactly I was looking for. More power to you man. Kudos to content creators like you. 🙏

The Intro perfectly describes the skills of this person in BLENDER ...! Love from Pakistan

I tried a lot of tutorials until i found yours and its awesome. I learned so much until now. Cant wait to absolve the whole course. Thank you, for your work. Greets from germany!

man i love u, this is some next level tutorial series : its clean,short, well planned and straight to the point.

@CrossMindStudio

3 жыл бұрын

cheers

For those confused with the steps, check the clicks and buttons he is tapping that are showing at the bottom of the video. Also, he changed some buttons in the first video, which means his left click is the standard "right click" in blender (i.e CTRL + right click for extrusion)

I love the way you have explained everything and payed attention to all the details. Thank you so much for creating this tutorial.

This tutorial is absolutely amazing thank you so much for creating this content for free! I don’t usually write comments but I hope you realize how helpful this video was for me :) Again, thank you so much I really appreciate all your effort.

I love your tutorials, even if you're too fast and I have to watch them at 0.5x speed to follow along. It's worth it! Thank you.

@CrossMindStudio

4 жыл бұрын

Lol, most people complaining im too slow 😂

@musicaldelight5519

3 жыл бұрын

Can you please tell me how to bring the wireframe in edit mode... I am unable to make the spoon

@CrossMindStudio

3 жыл бұрын

musical delight just press z. You didnt watch first chapter (Day 1)?

Amazing tutorials.Finished my day 1 in around 5hrs.I am a beginner and so blessed to have found your tutorials in my second week in blender. I am hoping to use my one month on your seven tutorials .you are very amazing

Another wonderful installment to the series. Thanks so much for sharing these with us. More people need to see this .

Why many people think that only part 1 is enough for them 😅

This is a really amazing tutorial series i could found...The structure is so thoughtfully designed for Newbies like us and its motivating too for learning. Keep up the good work. Looking forward for more such tutorials.

@CrossMindStudio

3 жыл бұрын

You're very welcome!

Hands down the best blender teacher I've found and I've looked through so many on KZread, Udemy, Skillshare...

You are amazing teacher. This video alone has been a few lessons for me, but so worth it. I can't wait to get through this whole 7 day tutorial, I have a feeling I can make nearly anything with just a few simple shapes by watching you. Thank you.

It took me 2 days to finish but I learnt a lot! Thank you for this!

OMFG bless youu forr making me fall in love with modelling in blender! I used to be really intimidated by 3d softwares but you make it look like so much funn!! :"))

@CrossMindStudio

3 жыл бұрын

It is fun. Keep going.

"Unbelievable amount of attention to detail. Only tutorial I found so far covered everything without confusing me unlike many of the big names in blender community." Thank you very.! Respects..

Tutorials are always precise, inquisitive and perfect. All other tutors just blabber a lot of things which really confuses beginners. Crossmind is really structured but at the same time it gives you a firm footing which encourages you to explore things on your own.

Went over this video a few times. You explain EVERYTHING so well. I messed around and made a few things while I worked along with you in the video. I wouldnt recommend anyone else if you’re just starting💯💯💯

@CrossMindStudio

Жыл бұрын

Glad it helped! Dont forget to check the rest of the video of this series. There are 7 chapters. Good Luck

@JAIISANN

Жыл бұрын

@@CrossMindStudio luck was very much needed but my progress has shown! thank you!!!!!!!!!!!

The most complete course ever created, i'm still finishing up the day 2, i'm impatient to be on the day 3 !

@CrossMindStudio

Жыл бұрын

Real fun begins in chapter 6

This must be one of the best tutorial series on youtube. This + the Donut Tutorial gets you ready for a lot of basic situations in blender. Thank you a lot for this !!

BEST BEST BEST TUTORIAL IN THE ENTIRE BLENDER COMMUNITY. Very thoroughly explained and shown how to use different and I must say all kinds of commands. Can't believe this is for free. Much respect for you sir and I thank Crossmind Studio for this. If you are a beginner this is where you should start!!

You can just right click > shade smooth instead of having to search for it. You can ctrl+1 or 2 or 3 to add subdivision modifier.

@whizkid2000

4 жыл бұрын

He calls that out around 40:00

@BodhiGyan

Жыл бұрын

Thank you...when I pressed spacebar, the timer started to run.

Damn, these tutorials are simply amazing!

@CrossMindStudio

3 жыл бұрын

Cheers.

Hello, I don't write comments on youtube very often, but I wanted to let you know this is incredible so far and so easy to understand. I have a background in more engineering type 3D software (solidworks, Fusion 360, Revit) and was interested in trying a bit more artistic application but was always scared of jumping in. You've made it very easy to understand and enjoyable. Thank you so much! I can't wait to continue with the rest of the intro course

thanks for these high quality and free blender tutorials !!! Huge respect from bottom of heart! U helped me a lot in modelling 3d models!! Thanks again!

If someone can't get the smooth bevel at 8:14, I had to change the bevel profile type to 'superellipse'. Bevel menu appears on bottom left when created. Let me know if there are other ways.

@stefancolic3435

2 жыл бұрын

thanx bro

This is perhaps the most comprehensive tutorial that teaches how to create Blender models. Thank you Sir jee! you are the best!

@CrossMindStudio

3 жыл бұрын

You are most welcome

Thank you for the effort you put into this and also sharing it with us. People like you make the world a better place teaching other people stuff that can be life changing.

@ 45:00 anyone is confused after 44:30 or getting errors like SELECT AT LEAST TWO EDGE LOOPS so what he did was applied the SUBDIVIDE MODIFIER if you can’t find APPLY button its right next to 📷 icon there is a small bottom ARROW🔽 click on it and there is APPLY option and for error SELECT AT LEAST TWO EDGE LOOPS if you look closely he duplicated the object (cube/sphere) while he was in EDIT MODE so that means its still a SINGLE OBJECT NOT A separate DUPLICATE ONJECT do that or else you can do is DUPLICATE THE OBJECT and SELECT BOHT THE PARENT AND DUPLICATE and press CTRL+J and then inEDIT MODE delete the faces on both of them and select THE EDGES while holding CTRL AND SHIFT and then press SPACE to search for BRIDGE EDGE LOOPS! HOPE IT HELPS SOMEONE ✌🏻😄 Ps THANKS FOR THESE AWESOME TUTORIALS MAN

@DMsCloud7

2 жыл бұрын

You definitely helped me. Thanks for the comment xD

"As you can see, this one is hard." Yeah, did feel mine very hard.

@CrossMindStudio

3 жыл бұрын

🤦‍♂️

@maiamaya6083

3 жыл бұрын

haajhahahahaajaajjaja

bro you are awesome, i dont have any words to describe your excellence

@CrossMindStudio

Жыл бұрын

Thank You Glad you found this channel Do visit the playlist section 😌

This is such an awesome series of Blender Tutorials. I am following along at about one quarter speed.

Thank you so much for this series. Wishing you a lot of health and luck!

Thanks so much!, im improving my blender skills because of you :D

@CrossMindStudio

Жыл бұрын

Awesome, keep it up.

great tutorial bro..all in one session..helps a lot for the absoute beginner

@CrossMindStudio

3 жыл бұрын

Glad you found it useful. Btw this is 7 day series, you can find the rest in playlist section.

Such a great tutorial, so far my confidence using the program has grown in just 2 days.

Thanks so much man......I can't believe they are people in this world generous like you to offer such quality information for free. Thanks a million.

Only legends notice that this guy has given heart to everyone except me :( Anyways thanks a lot , your tutorials are great

Day 2... although it took me a week to move on to the next one, I've managed to create everything in my fridge! (it's pretty empty tho) Big thanks again, I will now move on to day 3 :D

@CrossMindStudio

3 жыл бұрын

Thats fantastic. It's ok if it takes time first time.

@MackyAr

3 жыл бұрын

How's progress?

@jaykim8778

3 жыл бұрын

@@MackyAr Well I was actually working on a game on Unity and after Day 4 I started creating my own game assets! Thanks to this guy... :D

@MackyAr

3 жыл бұрын

@@jaykim8778 damn thats nice👌🏻

I was following your instructions and try to make things you made and it was a little difficult at start but I got the hang of it. I made extra models like water bottle and Laptop it was fun ❤️ thank you for amazing Blenders tutorial series. Amazingly detailed series

One of the best Blender series out in the market. And it is FREE FREE FREE !!! Absolutely you are legend Ram. For a complete beginner like me this is just perfect to start off. Also the explanation is so simple while being right to basis. I would recommend anyone this whole channel if you are starting with Blender. Respect

after seeing your all videos. Now i am thinking i am expert of blender 😂😂😁

@CrossMindStudio

3 жыл бұрын

You can do it :P

Thank you for these fantastic tutorials. Not gone on the background music...its kinds distracts from your other wise super videos

This is insane mann! this seriously shows your clarity and practice in modelling/blender skills , thank you for teaching this for free , SIR!

Fantastic tutorial. I have made all these and feeling confident in modelling objects. Thanks a ton.

At 44:04 To get rid of the borders after sub-dividing, click on the drop down arrow beside the camera (render) and hit apply to get rid of the borders.

@0Budgetprod

Жыл бұрын

Thanks dude!!!

@shingo371

4 ай бұрын

thanks man

Thank you for making this

@CrossMindStudio

3 жыл бұрын

You are welome.

Excellent video. Clearly explained all the basics to get started on soft soft. Thanks

This video series is one of the most useful tutorials about Blender on KZread.

My dream to be an 3d animator because some reasons i cont join the course this tutorial is fulfilling my dreams thanks lot man 😊

@CrossMindStudio

3 жыл бұрын

Best of luck!

Thanks

This is the most complete tutorial series for beginners. Thank you very much for making it :)

Ngl I wish I found this tutorial earlier cos every other tutorial has a point where I get stuck while trying things a bit differently, this is by far superior to anything else out there and for free. i wish all the success to you crossminds studios, thank you

Im finished my first tutorial now im here for next class ❤️💥 i think i need watch your further videos ✨🌟

@CrossMindStudio

3 жыл бұрын

Have fun!

@hajirotv5685

2 жыл бұрын

Are you able to peel off the banana using RIP Region?

I have a questions: at 1:09:42 how did you extrude in two different directions at the same time? P.S. love your videos, excellent work!

@blisteredoutlaw418

3 жыл бұрын

he used "extrude among normals", he talked about it around 38:30

@junelee8164

3 жыл бұрын

@T-51b Soldier I had same issue, but solved by clicking the top menu instead of the extrude menu on the left. in the edit mode, try to click Mesh-Extrude-Extrude Faces Along Normals. this worked for me.

@zarrar7133

Жыл бұрын

Idk about you guys I just used to localized menu above lol

May Allah bless you with success on every step of your life... I swear, every minute that I follow your steps, I do not regret it at all.. You are such a blessing for all those newbies who really do want to learn the tool and obviously modelling. Love every bit of what you teach and there is no single thing in today's lesson (i.e. Lesson no. 2) that has put me in any sort of confusion. You are the best teacher I have ever found on KZread by far. Honestly, I won't regret calling you my Guru and Ustaad. :) Thank you soooo Much for such a detailed lesson on Editing Objects. Looking forward for the next ones too (once I finish this one) :))) You are ABSOLUTELY AMAZING!

Lots of detailed information and various model examples. Thank you, this helped a lot 🌸

Waiting for your video on "How to make disney characters in blender for beginners".

@CrossMindStudio

3 жыл бұрын

Just learn to make characters. Disney and Lucas are just styles.

@CrossMindStudio

5 ай бұрын

kzread.info/dash/bejne/YpeWr6psYNvZZZc.html

GOING FOR DAY 2

Wow! I am so glad I found this channel. Hats off to your teaching skills

Really excited to try this feature out! Amazing work !

Took me hours to take notes and understand only the firsts 37 mins, some steeps were hard to replicate for me because it use 2 keys combinations and only realized it after several attempts qq. But so far it is a good tutorial and ty for that.

@CrossMindStudio

3 жыл бұрын

This chapter I made in a way so that you get used to all the basics while following along. Trust ur muscle memory.

Best blender tutorial out there so much information packed in to these videos while they are long blender is complicated and no time is wasted they each video in the series is jam packed with information that other tutorials skip over

@CrossMindStudio

Жыл бұрын

Glad it helped 🥹 Thank you

Thank you sir i can't believe I made chp 1 project on my own and now headed to chp 2 it is now giving me little-little confidence to excel😍🙏.