Big Mill Basic | LOGOSOL
Тәжірибелік нұсқаулар және стиль
Worth Knowing about the Big Mill System
* Cut as short logs as possible, and you will get better precision and the work will be easier. The aluminium guide rails can be fitted together and extended when required. They are available in the length of 0.5 m (1.6 ft), 1 m (3.3 ft) and 2.75 m (9 ft).
* When the guide rail is over 4 m (13 ft) long, a guide rail prop should be fitted at the middle of the log; when it is over 7 m (22 ft) long, two guide rail props should be used.
* If you want to upgrade your sawing, the TimberJig and guide rails of Big Mill System are compatible with the Logosol Sawmill and Woodworker's Mill.
* The packages are composed to give you what you need, but all components in the system can also be ordered separately.
* More information about all the possibilities, components and accessories of the system, are described in the manual.
* We can provide you with a chainsaw, guide bar, and chains that are suited for sawing logs, but you can just as well use standard equipment if you already have a chainsaw with two bar bolts.
* Sawing is great fun! The feeling when holding your first board is hard to beat.
Read more at: www.logosol.com/sawmills/big-m...
Пікірлер: 11
Brilliant
I sure want a cup of coffee, too!
With the scrap pieces that have bark on it I built my dogs a doghouse cabin 😉
So go to the woods with this big piece of steel. The guy walking in had just a saw. Oh, and a couple 2×4s and 1÷4 s.
donde puedo comprar una guía de esas
How to order timberjigs logosol
1,200 dollars. That's hilarious. The timber jig is under 200. So that rail and knobs costs and extra 1,000... you would sell a ton of these if it was priced correctly.
This mill is very expensive and does not fit on "most" common chainsaws, I had such a bad time with this mill once I realized Husqvarna is not considered a common chainsaw. This led to an extra package costing 1/3 of the price of the mill to have it fit with Husqvarna. I returned it. Just
@johndarcey
6 ай бұрын
I've ordered the clutch cover without floating bar nuts. I've ordered the Logosol Big Mill Basic. Hoping my experience is different than yours. Will be using a 592xp.
When I watched this video first time I was blown away. But then I watched hundreds of others, real people trying to do the same. Even with huge saws and correctly sharpened ripping chains it goes several times more slowly. My conclusion is that this commercial is nothing but a fake. They most likely accelerate the video at least three times.
I sure want a cup of coffee, too!