Let me give you a little tip on remounting these little suckers, just leave in the sun for about an hour , let the rubber heat up a little, then they will go on so much easier, your welcome.

Just changed my inner tube on my tiller. Took 15 minutes and no fowl language. What I would advise is use three 6 inch c clamps to help hold the tire from popping back up. As you pry the tire bead onto the rim keep adding c clamps to squeeze the tire to hold it in place as you move your screw driver around. Lubricate the tire bead with any kind of oil. This helps the tire bead to slide down your screw driver. Went faster and smoother than expected. Hope this helps fellow DIY.

@VansWorld

4 жыл бұрын

Great tips and advice. Thank you for sharing 👍😁

@danielebrparish4271

3 жыл бұрын

Oil can cause the tire to deteriorate. Tire shops use liquid soap

@tommurphy4307

Жыл бұрын

@@danielebrparish4271 use cooking oil

@jeffro4kag206

11 ай бұрын

Very sound advise, yet I feel the use of the foul, not fowl, which pertains to birds, language, indeed helps sometimes when pursuing a job like this.

@Thego-kartkid

10 ай бұрын

Lucky

I just took my tires and the inner tubes I purchased on Amazon to my local tire shop and they installed them for $10 apiece. Well worth it to save the aggravation, potential damage to the tire, the inner tubes and to myself. 🤓

@muffs55mercury61

9 ай бұрын

Glad that worked for you but most tire shops and even lawn mower repair shops won't do tires except to plug a hole in a flat.

@rvalens2

9 ай бұрын

@@muffs55mercury61 I guess I'm just lucky to live in Idaho. Our tire shops go out of the way to help customers. Maybe it's because I live in a rural area where the tendency is to always help out others whenever you can. Besides, it's great marketing tool for them since the next time I need to buy tires for one of my vehicles, they will be the first place I consider.

@muffs55mercury61

9 ай бұрын

@@rvalens2 Yes rural areas are like that. I live in one. There is a small shop that would likely do it for me but I'd feel a little out of place if I were to ask him to mount tires that I didn't buy from him. He is a used tire seller and doesn't get wholesale discounts from tire makers so he doesn't deal in new tires.

@runningdastreetsVA

Ай бұрын

Thank you! I had no idea a tire place would do this.

@rvalens2

Ай бұрын

@@runningdastreetsVA You're welcome. However, not all tire shops will mount them for you. But it doesn't hurt to ask. Les Schwab was where I took mine.

Good video from a regular guy giving helpful tips.

Thank you very much. It says 5 years ago number one leading video on this subject thanks a lot

Well done, thanks! This is exactly what I have to do. I was just trying to figure out how to break the bead and you got out the PB Blaster, which I just happen to have a can of sitting on the shelf! Time to get to work! Thanks again!

@VansWorld

3 жыл бұрын

Good luck. It can be aggravating. I finally put foam in all four of my tires. No more air loss now. 😁👍

Glad i have the modern tire that half as thick. Easy to stretch and not dry rotted. The amazon option looks great after watching this. 😂

Thank you! Watching you sweat it out almost made me not try but I had done one a few years ago and really needed this mower running today! I didn't take the tire off the rim though...

@VansWorld

2 жыл бұрын

👍😁 that’s awesome. You saved big $

Baby steps! Nice work...about to go do mine now

Good video, reminded me of the steps I knew but haven't used in a few years. Tire installed, fingers all intact. Thanks

@VansWorld

2 жыл бұрын

Heck yeah. 👍😁

Thanks buddy. Something I thought would be so simple. Viewers be sure to remove tire lip from stem side of wheel. The locking pliers were crucial

The stepping on it while using both screwdrivers is the important technique! Lol. Thanks for the video

Your video is the after of the before and after learning to put on the tire right😅. Thanks a ton

Going to do mine after seeing how you did this. Most helpful video. Thanks Bro.

I did this yesterday. I ended up putting on the ground like you did and used my knees to put weight on it as I got the tire around the rim. It was a lot easier that way. Great video.

@GreatSnakesOnTheHighSegunda

11 ай бұрын

a 4" pvc coupler under the hub helps too

Thank you, your video help me out alot Yes, patients is the word we need to do. I don't know how long it took you, you show it just fine The comments help out to. Thank the comments

Thanks for the video. I was having trouble with the valve stem wanting to retract back into tire. Used a small hose clamp on stem to keep it from happening.

I just learned from you. And took off my stupid tire from rim 5 minutes ago thank a lot

Did her today. Your vida helped. Thanks.

Worked up a sweat there, Van. It saved me a whole lot of money because I don't have a riding mower. :-) ATB & GL Always

@VansWorld

5 жыл бұрын

Haha. Maybe one day it will help someone you know lol. I hope you have a great week. And thanks for watching 😁👍

Thanks for the video! Nothing like changing one in the summer heat! Lol Appreciate it!

Another tip is with the tubes I got the valve stem on the tube leans a little in the direction it needs to go into the hole on the rim. I inflate the tube a little and mark the intertube on the side the valve stem leans. I didn't do that the first time so when I aired up the tire the valve stem popped out of the hole and went to the other side of the rim. I had to break it all down and turn the tube in the other direction then it work perfectly.

@VansWorld

2 жыл бұрын

Awesome tip. Thanks. 😁👍

Have to install 2 tubes into a Deere cart. Glad I found your video, thanks brother.

@VansWorld

2 жыл бұрын

No problem I appreciate you 👍😁

You gotta be careful not to pinch the tube and put a hole in it. That happened to me on the first one I did. I went to harbor freight and got a couple of tire spoons after that. Makes it a little easier.

@VansWorld

3 жыл бұрын

😁👍

Thanks for showing all starting with taking the wheel off. Mine was a bit different but good reference.

love how your videos are about saving time n money. Great installation, I enjoyed watching this :)) much love from Australia.

@VansWorld

5 жыл бұрын

Awesome. Thanks. Maybe this video will help someone you know. 😁👍

Thanks for your help,I did it😂.

Nice, exactly the video I was looking for, and no special tools needed!

@joelfarm8497

Ай бұрын

Actually, he has what looks to be a modified bent screwdriver to catch the inside of the wheel.

I have the same Popular Mechanics blue screw driver! I bought it 25 years ago I think in Walmart. Time goes by so fast.

@VansWorld

2 жыл бұрын

I believe that’s where mine came from too lol

You’rere a strong dude!!

Thanks for the tips man it really worked for me

Nice job - thanks for posting! I like the suggestion and will give this a go too!

Thanks, this worked for me. Thank you for the demonstration.

Thanks so much I save some money and gained knowledge ❤

That was very helpful we got a slime tube and it didn't have anything to hold the stem in the hole I only needed to see how you kept it in there all good now

The vice grips makes it so much easier....I used (2) vice grips.on the rim...made it so much easier

looks like that PB Blaster stuff really helped out

Thanks for the help dude, appreciate it👍🏿

Thanks for the tutorial brother

Got my tube orderd thru ur link, hope you get a kickback from it.

Thank you so much for making this video it was easy to follow and extremely helpful :)

@VansWorld

3 жыл бұрын

No problem. I appreciate you watching and commenting 😁👍

I have all four tires to do this year. Tubes coming in tomorrow

My hero. Let me try now.

You made that look so easy thanks

I went through three, new inner tubes, somehow puncturing them on the step at 3:46. The tools I used must have punctured the tube, as I was fighting to get that last step done. I was so careful, so careful, yet wasted my time and money. As I watched this video at this step, I was thinking he was going to do the same. It seems to me that at that step the rim needs to be elevated so that the tire could ride to the inner part of the rim so that it makes more slack. Since you don't know where the tub is sitting inside there when doing that. It would seem that a more blunt device be used to pry the tire over the rim in that step. The other thing I did was completely remove the tire to cut off the 2 patches I had put in previously. I also put in a 5.5 inch wide by 4 feet scrap of vinyl flooring to protect the tube from all the things that try to poke through when mowing. The tubes that I purchased were 15 x 6, but the tubes are way small to fill in all that space in the tire.

Thank you for saving me $50.00 instead of having the mechanic do it. Vice grip on the valve; nice touch!

I know this is an old video, But Great simple video, save myself from going to the tire shop. Thanks

@VansWorld

3 жыл бұрын

Your welcome.

Great instructional video! I purchased the wheel assemblies off Amazon and they started leaking air after the warranty expired. I will install inner tubes into those Amazon wheels next, thanks!

I wouldn't put B'laster on it. It's a solvent and will break down and soften rubber. Ru-Glyde tire lube is best, but some use dish soap, yet I avoid that too.

@tommurphy4307

Жыл бұрын

tire beads are heavily reinforced- PB blaster will eventually swell/ruin the bead, but it would take years

Great video! Thank you! Also sometimes northern or fleet farm has those tires for sale new for around $25. I went for the tube to save $5 bucks tho cause I'm cheap. Honestly great video. It helped me to be patient when getting rubber off and on the rim. I love these videos. God smiles when we use our phone to do good. God bless you all.

@VansWorld

Жыл бұрын

Same here. Have a good one and thanks for watching 😁👍

@andrewadcock1566

Жыл бұрын

Sometimes it's not the tire leaking but a rusty rim so you'll need a tube unless you buy a new rim as well. $65 for the tire and rim around here...

Good work . I use longer pry bars for more leverage. If able to ,I have put a round bar in the center hole for ritating the tire back on , like a tire machine does. Keep up the good work ppl! 😊

Nicely done. You might mention the need to inspect the tire as it may have a nail/thorn/foreign object that punctured it still stuck in it that needs to be removed before replacing/repairing the inner tube. Careful not to jab or tear your skin as you feel for the foreign object. I speak from painful experience on this subject. Cheers all.

@VansWorld

4 жыл бұрын

Great information. Thanks for the feedback. Sucks getting stuff stuck into your fingers though. 👍😁

@GreatSnakesOnTheHighSegunda

11 ай бұрын

the best way to check for remaining puncture objects is to drag a shop rag around the inside instead of your fingers. The shop rag will catch on any sharp objects instead of your finger :-)

Thank You Sir!

Good stuff buddy!

@VansWorld

5 жыл бұрын

Thanks brother. Maybe it will help someone you know. 😁👍

Mine cub cadet has a carter pin. No barring in the rear. Now mine didn't come off as easy. Hitting with hammer or standing on it. But I stuck a block under it. On the rim. And used two bars and a stationary hole to press off. After easy peasy theres a grease insert on mine. Will grease while off. Great video thank you

@VansWorld

3 жыл бұрын

I appreciate you 👍😁

@kenlockamy277

2 жыл бұрын

*cotter pin

I checked where it was leaking in case something is poking through the tire. In my case it was just dry, cracked on the tread so I ran a tube. I broke the bead with a vise. I removed any weld splatter on the inside of the wheel. Ran a peice of duct tape all around the inside of the rim so the inner tube doesn't rub on anything I missed. I used baby powder to make things slide. Wiped everything clean. Had to use vise grip also on valve stem until installed and filled.

Great video thanks. Keep up the great work see you in the next video thanks again

@VansWorld

5 жыл бұрын

Thanks brother. Have a great week and thanks for watching

I hope I can find my Fancy Schwinn tire tools. When I was a kid the screwdriver always found the new tube while wrestling the tire back on. That's where I got my experience patching brand new tubes.

@rodneycaupp5962

3 жыл бұрын

Good video. I kind'a figured that's about what it would take. Hell I'm already bleedn just taking the wheel off

Thank you very much!

use some soap ( Dawn ) or some of the snot they use at the tire shop. Makes it easier to slide on, just like KY.

OMG you sound just like me, with the comemaw's and you can do it. LMAO. I am so frustrated with this tire and I watched your video and I laughed so hard because of that. I am no longer frustrated. LMAO

@VansWorld

2 жыл бұрын

😁 thanks.

I LOVE IT!!!!!

Good Job 👍

nice job, thanks for the video

@VansWorld

Жыл бұрын

Thanks for watching!

Great vid, thank you sir👍🏻

Great Video, Liked and Subscribed!👍

@VansWorld

5 жыл бұрын

Thanks. And thanks for watching 😁👍

My tire lost its seal. Did not want to find an air compressor. This is what I needed to get the job done. Had to mute the audio... sounded like a porno... hnngh... come on babay... yeah... hnngh... ahh... whew!

thank you 🙂

Thanks!

Great video.

@VansWorld

3 жыл бұрын

👍😁

Vise grips on the valve stem. Genius! The valve disappearing back into the rim has always driven me mad.

@tommurphy4307

Жыл бұрын

geez put the cap on there

Great video 👏

@VansWorld

5 жыл бұрын

Thanks. Maybe it will help someone you know. 😁👍

Great sharing

@VansWorld

5 жыл бұрын

Thank you 😁👍

A Good One With Sweat!

@VansWorld

5 жыл бұрын

Haha. Digging in brother 😁👍

I had to add a tube to my wheel barrel! Don't pinch the tube! Got it! 👍

@VansWorld

5 жыл бұрын

Yeah. Definitely don’t pinch the tube. Lol. Thanks for watching Papa Texas. 😁👍

@kenlockamy277

2 жыл бұрын

*wheelbarrow

My tire was shot, so I ordered a new one from Walmart, (and a tube too) and damn these are hard to get off the rim lol! And even harder to get the brand new one back on haha! I was dripping sweat just getting the old one off ha, I was like hmm, I should check youtube for ideas to make it easier to get on the new one. One thing I'll have to mention, on MY lawnmower, the rim is slightly smaller on one side, (the side with the valve) about a 1/4 inch smaller diameter, so that helps a little to get it on! I didn't think I'd be able to get this damn thing on haha! And yes get the smaller side in first then put on the tube. Like he did. Lube would definitely help. I thought of using some soapy water, (and then letting it dry first) idk.

@tommurphy4307

Жыл бұрын

just like automotive rims- they have a depressed well where you can place the bead to give more room to slip the tire over the rim. there's also a hump which keeps the beads out of there during tire failure in motion. look for that depression in your rim.

I always use tire-spoons rather than screwdrivers when installing tubes. Screwdrivers are more likely to puncture the tube unlike tire-spoons.

That’s for the vice grip trick or you just put the valve stem on it and it would keep it from slipping in that button on it with a pair of vise grips is way better

Perfect

Legend!

Should have taken the wheel rim completely off and filed the welding splatter smooth . They weld two halves together and leave the welding splatter there because the tires are tubeless , you put a tube in there and it rubs on the splatter and goes flat , don't ask me how I know lol

where can i buy 6x9" inner tube.

The amount of anxiety I got while watching you use 2 screwdrivers is immeasurable. 😂

I like your foot and two arm trick. You're right it does take 3 hands to do this job.

likes from me bud :} great for others to learn and you made it look easy :}

@VansWorld

5 жыл бұрын

Thanks. It was really hot outside working on this. 😁👍 thanks for watching and for commenting 😁👍

...... come on baby ! Final words to get that tube in , lol

I once had a new valve stem on an inner tube get ruined because of the sharp edge of the rim hole, and all the fiddling with it being held by vice grips.

Nothing like that Georgia heat. 🥵

@JustMe-mg6vw

3 жыл бұрын

Sure there is....Georgia humidity. We don’t trust no air we can’t drink.

Lam.Tot Well.Done

What do the numbers on lawn mower mean?

I know it varies but I was always tought to Put little air in the tube and see how the stem is offset. Generally I have to install the blue line towards the side without the stem.

@VansWorld

4 жыл бұрын

That’s great tips. I found a better way than a tube. I got tired of tires leaking so I put expanding foam in my tires. Best thing I’ve ever done. 👍😁

@VansWorld

4 жыл бұрын

Go to Walmart in the automotive section and get the foam for tires. Follow the instructions on the can. Pretty easy. 👍😁

Mine has no stem. I am confused none of the tires have one never heard of it

I would of sanded the rust and looked for any foreign objects that might be in the tire or floating around but good job none the less.

Nice

@VansWorld

3 жыл бұрын

👍😁

this is something my husband would watch, I have no idea about this

@VansWorld

5 жыл бұрын

It’s cool. I appreciate the channel support and the comment. Have a great week. And thanks for watching 😁👍

Craftsman tire e clips work well. John Deere require a pair of Snap Ring Pliers. Guess they need to feel special! Lol

My stupid tire just wont go no matter how I try even though I did the exact same steps as you ????I get 3/4 way then it pops off where it was seated even with me hold ing it etc

When did you put the other side of the tire on the rim? Before or after you put the tube in? Not so easy!

Do you use the same tire pressure for the tube vs when it was just the tubeless tire?

@PinePondCTDevilsHopyard-fy3hj

Ай бұрын

Yes.

Fast indeed!