Guys I can do a part two against the top ones of this vid but a fella doesn't want to buy 9000 more screwdrivers lol I definitely own some wera but have no pb Swiss or whiha I will get some of these for the next go round thanks 😉 👍

@lewydmusic

Жыл бұрын

All good my man. You work hard and give us great content! You don't need to go buying anymore for our sake, loved the video as is.

@peterchristlieb

Жыл бұрын

Wiha makes a damn fine screwdriver, blades are very similar to the Witte but the handle is a nice cushy palm swell. He Witte shape is actually better for transferring torque

@peterchristlieb

Жыл бұрын

Wiha makes a damn fine screwdriver, blades are very similar to the Witte but the handle is a nice cushy palm swell. He Witte shape is actually better for transferring torque

@heritagejonery3879

8 ай бұрын

It's never ending with this type of thing. Personally snapon screwdrivers are the winner for me but I like a little more robust driver. Wiha make lovely screw drivers as do Wera but most of them I would say are for nicer work rarther than heavey work. The CK Classics are another German made screwdriver that I love, relatively thin hard handle though so an required taste perhaps? The Stanley Max ones are very good too, the oldest screwdrivers I got new and still in great shape, also sould as Britool/facom/Mac Expert but have a diffrent finish in them. If you want top value I would say the Wera Chisel drivers are the best, they are almost indestructible I have removed thousands if screw that where fitted 100+ years ago with a 7mm Wera Chisel driver, they are what I would tell an apprentice to get for top value and ability to take abuse. But for putting screw back in I love my SnapOn 👌👌 I think in the top of my box right now there will be an Snapon; SDD2, SDD4, SHD4, SHD6, SDDMR4B, a Teng PH2, Wera 7mm Chisel driver and CK HD Classic strike through 6mm. The two the same size is because one is much older and is an inbetween size now 😁

Great content CP. Thanks. My Snap On dealer just swapped screwdriver handles for me. I have a 25” slotted with a tiny black slick handle. It was too hard to hold on to. My SO guy put a large green instinct handle on it for me and called it warranty.

Those Vessel screwdrivers are JIS standard. You can the tell because of the "." (dot) next to the size: P.2X150. There is nothing bad with that, though. I've been using JIS P. screw driver for all my Phillips screw needs without any problem, and most of the screws I run into are non JIS Phillips.

@CPthetooladdict

4 ай бұрын

Vessel is all I use now they work way better than standard Phillips. Jis doesn't cam out like Phillips do!!

i sure do appreciate it CP when you feature Henry. He has such a unique personality. He is of course the tool addict dog!!

@CPthetooladdict

Жыл бұрын

Thanks for stopping in larry it was good to chat with you

Look Brother. Your doing great with the amount of time you commit to your channel. Love your Vids. Keep it up....

Got my hard handle SnapOns at my shop and brought my Instinct handles home. I haven’t used the Vessel Impacta, but a friend of mine bought it when he needed to changed rotors on an Accord. He said it worked perfectly.

PB Swiss,amazing quality,huge RD dept,state of the art manufacturing facility and they’re made in Switzerland!

SUP CP!!!! I love Henry. You and your vids are ok too. I had a little Boston buddy too. Best friend ever! He would stay in the shop until I was done... 3am? yep. Loyal friends are what make me smile, and good quality tools, and CP youtube vids. Give Henry a burger for me.

I have always liked the way Snap On fit my hand, maybe because I have been using them since the 70s. Having said that, I am a big fan of the Tekton hard handle screwdrivers. Might be the most comfortable handle I have yet to use. It's kinda like a modified Snap On. Thanks for the video brother.

NOTHING holds as tight as Vessel JIS drivers!!

@CPthetooladdict

17 күн бұрын

Amen

I just bought a ratcheting bit driver screw driver set off the Mac truck yesterday. Can’t wait to use it. Feels great in your hand.

I got my Vessel as a special item brought in by Princess Auto. ( a Canadian Harbor Freight). Through the years they have become my go to screwdrivers. The brand I will never buy again is Klein. Two broken tips , one scratching my car and poor warranty service. I feel for for people using them every day not knowing about Vessel. Great video. It will help make a lot of lives more enjoyable !

Y'know, with PF and TTC, they just kinda show what a tool will take to break. I'm not trying to break my tools or snap the heads off fasteners, I like what works for me and feels good in my hands. I love the way you talk about tools with passion, be it love or hate.

@CPthetooladdict

Жыл бұрын

I agree there content is more extreme and that's not what a tool was intended for but as Americans we are always driven to the competitive market by who's the strongest toughest meanest lol

I have a bunch of mixed stuff. Channel Lock blue handle demo set does most of my work and are very comfortable. Specialty bench work or stuck fadteners get Wera laser tips.

Great video! Glad I found your channel. I'm planning on upgrading to a tool truck brand in the near future. But I've been using the Doyle screwdriver set daily as a motorcycle mechanic for a little over a year now. They've held up great and really have no complaints with them, especially for the price.

Awesome video brother. Thanks for sharing. Keep the incredible content coming. Hope you have an incredible weekend. Much love and RESPECT brother

Henry is Always welcome !

Love my snap on,Klein , Carlyle butmy favorites are my old craftsman professional made by SK

Good Evening All: CP it was happy to see Henry at the start of your video. Since you brought up screwdrivers I had a complete new set of Snap On comfort grips in my box fir a long time. My friend in Idaho uses Klein's so I boxed them up & he just received them the other day. He knows of Snap On but there are none where he lives. I figure I would expose him to some decent tools for his enlightenment. Another great video sir I can see a trip coming to JDTCO for some Vessels. Thank you for your opinion. Have a great weekend you & Henry, TMP from N.J.

Thank you CP, I know what I’m getting on Wednesday.

Awsome review!!

Great video CP! For some reason the classic hard red handle Mac screwdriver is my favorite. And there black tips seem to hold up a lot better then my snapon ones.

Subscribed! Thank you, glad to find your videos

@CPthetooladdict

Жыл бұрын

Thank you welcome

Wera gets no love 😆 those laser tips screwdrivers are the best for taking things out and putting things back in 👌

@CPthetooladdict

Жыл бұрын

Pinned comment

Tips matter..it all starts with the tip..👍 Thanks Buddy..

I love my matco driver's worth every penny!

The best

I love the Tektons. Made in the USA and their hard handle is extremely comfortable for my hands. Wish they made their nut drivers with the hard handle. Also have the Vessel JIS Megadore without the JawFit for working on my Toyotas. I find the JawsFit is sometimes too aggressive on fastners.

French made Facom pro are beautiful screwdrivers. I also love Snap On hard Handle.

Ha, makeup artist: myself ! Lol I would’ve said Henry ! I’m an electrician and I do like Klein and I believe their designed to fit electrical equipment hardware, and they’ve never let me down, that said I also like the Snap-on , I really like the Wera brand as well. I’d also give honorable mention to craftsman, you’ll probably find a few in 90% of electrician’s tool bags, and the old industrial black set they had, you could chisel cement block with them, really hard steel and believe it or not I never broke one, I wish they still made them !

Lovin Henry

For mechanic work love my hard square handles snappies. Love Klein for other work.

I have a Klein I believe it is the 11-1 but screwdriver I love the screwdriver but one of the bits wouldn't stay in the sleeve, the detention ball doesn't come back out after the sleeve depresses it as the big goes in the sleeve.my only complaint still a hell of a handy screwdriver!!

I've bought a set of Witte maxxpro from Amazon after seeing the Matco ones here, just to try them myself. I've never been a fan of the snap on tbh and own multiple sets of there's. keep doing these comparisons, and more videos on rebrands for sure!

I bought the vessel jis and standard megadora love them

Curious I noticed the case In your toolbox what do you think of TENG tools brand CP, and I probably prefer Klein and I have a sunex comfort grip handle screwdriver set and I use probably 3 Phillips screwdrivers of a 20pc set??

Great video like always

@christophershepherd4399

Жыл бұрын

How u do KZread with just phone and yourself? I was told could help grow our business. Just asking for so advice.

Henry keepin it 100

Good video cp

Does anyone understand what the little vertical tabs on the front narrow section of the Mac Keystone grip screwdriver are for? They seem specifically designed to make it uncomfortable to hold. I ended up trimming them off with a craft knife.

I have the hard handle snappys at work and a set of pink instinct handles for home stuff

Great video! Guess I’ll have to get some Vessel…

Vessel and PB Swiss are my absolute favorites I agree with the megadora handel being a bit slick. My most used are the ratcheting ball grip vessel and the PB Swiss with the striker cap but just looking it up that Philips #2 PB Swiss is $26 so not for everyone.

myself should get a raise, what up henry

Need some PB swiss love dude!

@CPthetooladdict

Жыл бұрын

Working on it!

Wut up cp!!! Your knowledge of tools is imersive. As a professional user of tools that your are, you opinion is quite valuable to me when it comes to considering buying expensive tools and weighing out the options of, do I need them, do I just want them, are they worth it, is the value there over cheaper less expensive options. As I work my way back through your video library, I can't help but wonder if you have done a video on tap and die sets, and also, I thought I heard you "no!-go" the noco jump starters... am curious as to why, and what you would recommend over a noco... hulkman? Am considering buying the new type C rechargeable gbx's. Anyways, thanks for the content and the knowledge bro!

Klein Phillips screwdrivers always seem to strip out their tips. I bought the wera drivers also they feel good in the hand. seem strong also bought the #4 driver don't know why I must be a tool addict lol..keep them coming CP Ps love my yellow high visibility snap on screwdriver set

Been using bits on a impact for most things in low torque applications I prefer the oldhsrd handle snap on

Great video as always cp .the only thing I'd suggest if you do a follow up to this video is maybe find a way to hold the wooden block down just to make it easier you also I'd love to see a video like this on torx

I recently bought a vessel ball jis a wera and a set heyco. Those ball grip vessels grip the screw like crazy. Probably one of the best I’ve used. The heyco 2k has a very comfortable grip. Probably the most ergonomic with a rubberized grip. They are kind of short handles so people with large hands may not care for them as much. The wera was ok as far as ergonomics but not as good in my opinion. They laser tip didn’t grip the screw as well as the vessel or witte.

maybe a playlist for all you rebrand videos?

for a durability test get henry to chew on the handles

I like my Wiha screwdrivers. I believe they make the Matco.

@slayerment

Жыл бұрын

Matco are made by Witte

You need to try PB Swiss, especially their striking cap drivers.

@slayerment

Жыл бұрын

🎯

Henry best Co host of the show

not a fan of the Klein design, but man, the quality is amazing.

I have been wanting a quality screwdriver set set for eons. I have had snap on and love the handles. I love the knurling on those vessels, bolsters seem nice, too much to chose from. Maybe that's why I have leaned on the 6n1 style screwdrivers so much. My favorite seems to me the old USA made masterforce from Menards, I have 4 or 5 of these. The channelock and comfort grip craftsman are up there as well... Henry looks like he is ur little buddy, I hope he didn't eat cat poop before he licked your face. We have a retriever pup that is a sweetheart but she eats the cat poop... Yuck!!!

Henry has a kind face would not hurt a fly look

I was sold on the Snap-On #2 PH in the 90s and bought my set 20yrs ago (yellow & red hard handles) which are still sold as Williams today. I think I might have found one that might be better at gripping screws is the WERA laser tip. I turn a lot of screws at work (usually partially stripped JUNK soft chinese stuff) and the WERA just killed it on the last job I did. Taking them to the UK next week for a big job. I might have to try the Vessel out if break the WERA.

@darbo6955

11 ай бұрын

So what ended up happening? Deciding between Wiha and Snap-on and I just can’t figure out which is best for me. Completing the set with a Wiha which would be easier or getting snap on and other cheap screwdrivers until I am able to complete the set.

@OldBeaterGarage

11 ай бұрын

@@darbo6955 WERA Laser tip for the WIN! It's been flawless. I would highly recommend the WERA Laser tips! The plain is fine too but laser tip is highly resistant to camming out even on the tightest and most beat up screw heads.

Brother, the soft grip Mac screwdrivers on promo right now are fantastic. I bought some scrapers from my new guy on his first visit and noticed immediately how nice the handles felt. I didn’t need them but I couldn’t pass up a set for what they’re asking.

@CPthetooladdict

7 ай бұрын

Thanks for the info

@bossiesur

5 ай бұрын

What’s the promo? How much are they going for? I got the chance to buy a 6 pc set from Mac good condition for $40 think that’s a decent price?

@peterchristlieb

5 ай бұрын

@@bossiesur yes sir If they are the Mac soft grip. I would steer clear of the Expert branded stuff

What up Henry.

Which vessel would you recommend? The Megadora with Maxfit tip or the Impacta?

@CPthetooladdict

11 ай бұрын

MEGADORA

Good video cp! Have you ever tried wera screwdrivers?

I always liked the look of a drawer full of screwdriver sets but honestly I use a gun 99% of the time. I have a cheap phillips and a couple old craftsman flat heads on the cart then vessel 1 & 2 that may get used once a month.

@CPthetooladdict

Жыл бұрын

1000% agreed

hi cp, thanks for another great video. loved seeing henry also. would you be able to recommend a good bit for sheet rock screws. i strip the heads constantly with the #2 phillips bits i thought you were supposed to use on sheetrock screws? thanks buddy! cheers

@CPthetooladdict

Жыл бұрын

Wera makes the best bits hands down

@roadrunner1580

Жыл бұрын

@@CPthetooladdict thanks guys!!

@roadrunner1580

Жыл бұрын

@@djsi38t thanks for the info!!

@CPthetooladdict

Жыл бұрын

Your welcome buddy!

I'd like to try the vessel jis standard screwdrivers but I will have to find me some I can afford eventually lol..

@CPthetooladdict

Жыл бұрын

I posted a link they are around 50 bucks

can you do a video on bit drivers

@CPthetooladdict

Жыл бұрын

Yep

Any experience with the PB Swiss screw drivers?

@CPthetooladdict

Жыл бұрын

Good tools

CP do you own the klein journeyman cutters they beat the knipex line 6 ways to Sunday and knipex is a good brand

@CPthetooladdict

Жыл бұрын

I do not I will have to try them

@austinmoore1689

Жыл бұрын

@@CPthetooladdict they cut like no other and stay sharp a long time people only compare normal Toyota Camry klein (base) vs the journey man i seen but the normal ones hold up great I kinda wanna go to ace and pick them up

for phillips the best is wera with laser cut teeth. Dad said taking screws outta old headlight rings is the big test and no one touches the wera

@CPthetooladdict

Жыл бұрын

Vessel #1

@91rss

Жыл бұрын

gotta try the laser cut phillips though Headlight ring screws give you one good crack at them he said, and he hauls this out especially for them

say; CP what is your take on electric cars ?

my faveret screw drivers are snap on but their pricy so most of mine are old craftsman. I'm still angry sears went out of business hope snap on never does.

No Wera??? 😯😮😕

@CPthetooladdict

Жыл бұрын

Pinned a comment

Vessel ?

@CPthetooladdict

Жыл бұрын

?

@ralphsanchez2893

Жыл бұрын

@@CPthetooladdict Cp is there a quality difference between the Taiwan made vessel tools and Japanese made tools

@CPthetooladdict

Жыл бұрын

I didn't show any made in Taiwan vessel so not sure how that's relevant

The Klein screwdriver is the most copied screwdriver on the market. Almost everyone from Doyle, Stanley, Ideal, Craftsman, Kobalt, Greenlee and many others have made (or currently make) a copy of the Klein.

I haven't been impressed by the Snap-On screwdriver. Broke my Phillips twice taking screws out. Also I don't like the handle. I don't know what it is I just don't like the handle.

@slayerment

Жыл бұрын

Same. It's the aggressive trilobe design that I don't like. Not comfortable at all.

I started youtube channel but it's under our company name not my personal name

Buy the snap on and the witte be done.

@CPthetooladdict

Жыл бұрын

Vessel ftw

@jeredfowler7194

Жыл бұрын

@@CPthetooladdict I’ll have to try them I need some jis drivers anyway

Screw Me! Screw You! Screw Everybody! But only with a proper fitting driver please.

@CPthetooladdict

Жыл бұрын

Lmao love it

You could have skipped over and just said that vessel is the best screwdriver and let us spend the other 20 minutes with the dog 🤷🏼‍♂️

@CPthetooladdict

Жыл бұрын

What makes you think Henry likes you?

@carbonconnection2480

Жыл бұрын

@@CPthetooladdict. Because we text when you aren't around