Great vid, very informative. Yet you failed at mentioning perhaps the most important feature...The BEER HOLDER on the left fender. 🤣🤣🤣

My +20 year old craftsman 14.5 Briggs doesn’t have a oil filter works great!

Solid overview of the bronco. I appreciate the details.

i’m about to purchase one of this tomorrow morning for $400 dollars it looks super well taking care of the guy it’s upgraded to a bigger one i’m glad i saw this video thank you so much man

@manofculture4945

2 жыл бұрын

for 400 dollars that’s a very good deal

this is my second bronco troy built and other one was bought in 2007 and still going but with 3 acres it was straining to keep up .I bought the newer bronco back in 2016 so I can say they are great mowers for the price

I bought one of these the other day off Facebook marketplace. I liked all the access they give you. I got tired of adjusting the valves and replacing rods on the Briggs and Stratton.

Very good video about the likes and dislikes of this MTD (troy built) mower. I have a MTD (yard machine) with a Briggs 17.5hp I/C Intek engine. You mentioned the small fuel tank, and I agree, so I solved the problem on my mower by converting to propane using an on-demand-regulator which is very safe and approved by the gas industry. So when the engine quits for any reason, the propane shuts off too. And the two reasons for the conversion are 1.) No more clogged jets and dealing with the alcohol in the gas and 2.) Now I have a 4.5 gallon fuel tank that runs for about 7 hours which is about 5 mowings on 1/3 acre corner lot. Best thing I did and much fewer problems when trying to keep the lawn looking great.LOWES took on the Craftsman named lawn mowers which are also built by MTD and apparently dropped Troy Built.

Love those Kohlers!! Had mine since 2006, over 1000 hours, not one issue!!!!

Some of the newer Kohler residential grade engines have a lot of problems with camshafts failing. I just recently (within the last week) purchased a riding mower. After doing so research I decided on a Husqvarna with the Briggs 18.5 hp. The Briggs has some issues with head gaskets but the cost and ease of repair over the common Kohler issues steered me to the Briggs. Ultimately I think the difference between Briggs and Kohler comes down to personal preference. Some people have tons of problems with Briggs engines while others run them for many years with no issues and the same goes for Kohler. The newer Troybilt's are the same exact machine as the Craftsman mowers and while doing my research I found far more complaints about Craftsman mowers then any other brand. I can't speak from personal experience but the amount of issues people complained about with their Craftsman machines steered me away from them.

@uofmrebel

5 жыл бұрын

Aren't Kohlers made in China now?

Excellent Overview, Brother. Thanks!

I just bought a 2015 in pristine condition except for a couple of deck problems. 300 bucks. I'm over the moon happy

Great video. I bought a 2020 Bronco 46X new. Excellent mower, have to sharpen the blades after 4 years.

Just bought a 2013 used at a (I think) good price. 19 hp Kohler. Put little over $50 bucks into oil and filter change, gas filter, air filter, and new valve cover gasket. It was dripping oil on the heat shield over the muffler and smoking. So far so good… but it doesn’t do very well on slopes… fortunately I’m taking it to a second home that is flat. Disconnected the feature that shuts it off if you try to mow in reverse… I think the new ones have an override on the dash.

Thanks for your video. I bought one have not used it yet.

Good video, and thank you. I'm looking at these compared to a Deere. Where I live in Michigan Troy Built is at Home Depot.

Just bought a used bronco that looks like new. $800. 20HP Kohler. I was hesitant as reviews are all the place. Your vid gaveme some pieceof mind.

@WorthlessNickores

Ай бұрын

I have the TroyBuilt Horse XP 46" with 20 hp Kohler and it runs great. Check the 2 bolts under the flywheel and the valve cover bolts for tightness.

@LynyrdSkynyrdFan

Ай бұрын

@@WorthlessNickores I surely will. Thanks so very much.

Codyyyyy!!!! Thank you soooo much for your review. So many of my questions were answered with the difference between the Pony and Bronco. I own a Pony now (which was defective) that I bought in 2013 and couldn't have it replaced, just repaired. But I'm heading out RIGHT NOW to buy that Bronco. Thanks! Many blessings to you!

@KIGOutdoors

5 жыл бұрын

Thank you for you great feed back. Lol, I hope the Bronco treats you better then the pony did! Good luck. I know troy built is no longer sold at lowes and now is sold at home depot. I hope they are still the same machine! Thank you for the comment and veiw!

You sold me, I bought one. One question: How well does it do when mowing the lettuce next door?

What do you think of the same mower with the 19 hp B and S motor?

Great video! I’m waiting for my bronco to be delivered, I do a lot myself, and when i was told $600 to mow my backyard and clean up some leaves, one time, I figured mind as well invest

I Just bought a Bronco 42 in. (19 HP) for 2022. I have about half an acre and I hope to get lots of enjoyment out of this new toy.

I didn’t even see a Bronco when I bought my Pony. Would love to see basic maintenance videos. Thanks

Well you sold me. Thanks. I love it.

Nice video and well explained!

You get a chance put up another video about your mower. I have a Troybilt Super Bronco II 25 hp 54" cut and love it.

I have one a tad newer. The only thing I noticed that is different is the filter and mine is a Briggs and Stratton motor (540cc). But it has done really good until it started leaking oil in the front. I have to check and see if the seal is bad on the valve cover or if it needs to be tightened . I have been searching all night to find the right gasket, but think it just uses a silicone seal. Which is fine. Otherwise I have been using mine for 3 summers, going on the 4th this season! Can't wait to get out there and start mowing our acre and a quarter of Alaskan wilderness! It really is a tough little ride on. I paid $1499 for my Bronco.

Will this fit through a 49 inch fense. I see you can raise the grass chute.

Good video, good information. Also, I like those shades. What kind are they?

I'm shopping for a riding mower now and came across your excellent video. Q: Appears only HD sells the Bronco, and it now comes with a Briggs & Stratton engine, not a Kohler!. Would you still recommend the Bronco, and if not, what would you recommend for 42" deck mower? Thank you!

@christienelson1437

Жыл бұрын

True , I just bought one with Briggs and Stratton. I’ve bought many push mowers and my Briggs and Stratton motor has been the best. I always use their oil as well so I’m going into this with high hopes. God Bless and good mowing!

Did you look at the troy-bilt horse? And if you did why didn't you choose the horse?

Three gallon capacity for the Cub Cadet XT1 ! That has the Kohler engine too. I gave up on Troy-Bilt after my two year old high wheel mower fell apart. Two wheel bearings failed and later after hitting a soft willow root the blade shaft bent so bad it was useless. But nice video, well done!

@eugenealstonjr6030

5 жыл бұрын

Love my Troy bilt riding lawn mower super bronco I had it for 5year I been Blessed good lawnmower.

I bought one for the cottage. 1/2 acre. Love it

How do you maintain the deck and the mower blades? Easy to clean? Easy to keep the blades sharpened? Can it do snow removal?

@KIGOutdoors

6 жыл бұрын

The best way to keep the deck clean is to wash it after every usage. Just lower the deck all the way down and take a hose to it. Now the blades are not hard to remove but it does require you to get under the deck and take the two nuts loose that hold the blades on, But you can sharpened the blades if you get them off. Just be careful, the blade will want to turn as you try to loosen the nuts and those blades still could be sharp. on a scale of 1-10 1 being easy. I would give this project a 4. just because you have to get under it and hold the blades as you remove them. (wear gloves) Now the snow removal part. Troy built has all the options for this mower to push snow, wheel weights, chains and blades. I will say that it will do it but I have never tried to push snow. so sorry about that. thank you for the comment and view

Will it hold up pulling a trailer with dirt ,like a John deer trailer, 5 or 10 yards you know will it hold up doing work around th yard.

I have a 20 HP Kohler courage bucket engine, in my 11 year old troy built bronco mower. still going strong. key to maintaining a rider mower, Keep it clean out, I use a leaf blower after each time I mow the yard, Last year I bought some new parts, did some upgrade work to it. which included making up a ball stud tie rod for the front axles. although getting that screw they used locked tight in under the steering gear shaft was a bear to get out. I wash it out 2 or 3 times a year, I will tell you, although you can purchase a bag set up to mount on the rear, The Troy built mower is not the best at moving the cuttings to up the tube. plugs up easily, even with 20 hp, heavy grass will cause the 20 hp to stammer under the load of cuttings . at 73, I sort of doubt I'll be buying an other mower as long as this one keeps keeping on.

I have a troy biuld moer i have a probem the moer will run forwards reverse yet the pto will not ingaze the blades. have any ideas on how to fix it ive had for 5 or 6 years now it always be a good mower.this just happenin the last few days.

Just got a 2015 bronco. Steering seams a bit tight, but impressed.

Thank you for the info .just got the bronco..from home depot.

@hacxer8424

2 жыл бұрын

You should have gotten one from a dealer so that they can repair it and it's not the best Kubota makes good mowers hell tractors but if he's talking about basic riding mowers It's just fine altho it is mtd mtd sucks

Hey Kig great video man...btw you others doing regular maintenance such as changing the oil, air filter etc? Also have you had any issues sometimes when you go over grass sounds like the blades stop spinning?

Bought a used Pony with a rebuilt 18 hp pressure lubed with Oil Filter Briggs & Stratton rebuilt Intek from a Craftsman. So now I have basically a Bronco. The Craftsman mowers that Lowe’s sells now are in fact re-branded Troy-Bilts

I'd like to know how it held up after a year or even til now!

do you have a Home Depot near you? they have troy bilt.

I own one of these.....just bought this, only because my own yard is destroyed thanks to the seller of this log cabin. He drove his truck around the property and put so many ruts (deep ruts mind you) in this yard it destroyed my last troy-built bronco.....so i was forced to pay the last of my moving expenses, (another $2,500) to replace it. I have finally managed to get the tall grass cut down and hauled off so i can start from scratch. I bought a yard roller to try to get my property flat again and with the roller full of water it weighs 920lbs....how much water would you recommend i put in the roller that wont destroy my bronco?

any chance of getting a update now on this mower? likes and dislikes after several years of use.

Does the troy bilt 42inch 500cc 15.5 hp pony have an oil filter, I haven't located on on mine.

Mine came with the 547cc B&S. It has Been a Great Engine! It does have the oil filter. Take care of it like anything and it'll treat You right.

How to disconnect safety for reverse on 2016 troy bilt bronco automatic transmission. This video is very informative and thorough.

@IllIIllIIllIl

Жыл бұрын

Did u ever figure out how to remove it?

@100PercentOS2

Жыл бұрын

@@IllIIllIIllIl Yes, I finally figured it out. I think I disconnected a wire under the hood which did the trick. I had to do some Bronco busting since these mowers seem to have slight differences from year to year.

Cool and helpful. Thanks

Only problem with my neighbors is his belt keeps coming off when I barely hit a hole any solutions??

I just get a used Bronco and the problem I have is,,, when I put it level 1 or the Blades doesn’t work, Why? I always have to cut the grass on level 3 or higher…. Help me to figure out What is the problem? Thanks

What size of the lawnmower 42 deck belt i need another one

Just got a 2017 for $450. Wanted a new Cub Cadet but just couldn't stomach the price of new mowers lately especially after the last few years of inflation. Think I got a good deal on the Bronco and I'm hoping it gives me some good years of service. Writing this now in 2023, almost none of the local big box stores in middle TN seem to be carrying Troy Bilt. Home Depot, Lowes, Ace Hardware, all don't carry it. Tractor Supply seems to be the only place that still sells them. But as long as I can get parts I'm not worried about that.

great video

Good job!

Now they sell craftsman, which is the same thing. Both of them are made by MTD.

I need wheels for 16x 6” tractor tires the hub edge broke off and the tires wobble on the tractor cart because of it but I can’t seem to find any.

I’m looking to buy a riding mower for 1 acre of yard and I’m confused. Some people are saying don’t get a Briggs motor, get a Kohler. Others are saying Don’t get a Kohler, get a Briggs. Don’t get a Husqvaurna (I think I spelled that correctly), get a John Deere. Don’t get a John Deere, get a Cub Cadet. I just need a consistent review.

Is this model number 13AL78KT066? If not do you have any info on that model?

I bought one in 2009 has same engine and it looks just like the one I have still runs good but unfortunately the deck is rusted out hope I can find a good used deck for it.

Hey sr u have good video but can u do a favor cant you tell me how can i do fot tide mi band on my tractor

Seems kind of tight fit how tall are you

Started to ask what a "Branco" was...... Good stuff brother!!!

@KIGOutdoors

6 жыл бұрын

Sweet Tea lol. I saw it when I released the video. Dang autocorrect. I tried to fix it in a hurry but life happens. Thanks for the comment and veiw man! Glad to see your still here!

@sweetteaoutdoors

6 жыл бұрын

KIG Outdoors thanks for keep on keepin on, missed you lately!!

First, I have a Pony which does not have an oil filter. The engine on this one is the 15.5 HP Briggs. I'm still not sure why some Ponies had the 15.5HP and some had the 17.5HP. The 15.5HP has plenty of power. I bought this one used with less than one years use. I've used it 3 years now without any problems. I change the oil at the beginning of each year, mow my lawn once a week. It takes about an hour. Seven months is right at 30 hrs a year. Again I've had 0 problems with the mower. Still doesn't use any oil. I use 10W-30 Mobil1. It still feels like a new mower. Starts on first compression hit by the starter. Secondly, there are other differences between the Pony and the Bronco besides engine size and brand. The Pony does not have any deck wheels. That's a big difference That alone is the reason to by a Bronco. The Transmission in the Bronco is an automatic, not a manual like the Pony. Personally I prefer the manual. If the Pony had deck wheels I would actually say save the $200 difference, but it doesn't so yeah, buy the Bronco for the deck wheel which will keep you from scalping your lawn. As far as Briggs vs Kohler, I've heard good and bad on both. I still have a very old Toro Briggs push mower that still runs like a champ. I think it has more to do with up keep than brand as far as how long they last.

@skimask5049

5 жыл бұрын

yeah cause your using the thing 30 hours a year, that pony is a piece of shit so is this troy bilt

@thetruthhurts2216

5 жыл бұрын

And why do you believe that. You don't support you opinion what so ever. Makes me think it's pure bias or you are a John Deere salesman. If you are comparing a Pony to a commercial grade mower - is that really fair. You don't buy a Pony to do commercial mowing any more than buying a F150 to haul semi trailers. Does that make the F150 bad? Compared to the mowers in it's price range the Pony is a very good mower. Using it 30 hrs a year was what it was designed for and what it price range is for. It's impossible to respond to you because you give ZERO justification for you opinion.

Does it have cruise control

Briggs & Stratton already proved that it will last longer than a cooler engine any day.😮 Especially the bucket top cooler engine nothing but problems look it up.😮 Cooler's okay but you got to keep after them Briggs & Stratton you can run to the ground without servicing it.😊 Let me know what y'all think about that in the comment section. God bless.

@user-qk6kt1fe7j

18 күн бұрын

😂 Kohler

Bought my Bronco second hand, not sure of the year. Has the dreaded 17 HP Kohler Courage. Take great care of it. Have had exactly zero problems with it.

@LynyrdSkynyrdFan

Ай бұрын

Check the 5th numeral in the serial number. That's the 2nd digit of year made. 5 being a 2015

For your phone just put Velcro in that cubby and then get a phone case that you can use for lawn cutting so you can put the other part of the Velcro on the phone case so when you put the phone in the cubby it’s not going anywhere

I saw this click bait and had to hear what you had to say as my neighbor has an older style Bronco that I am constantly having to fix for her (I just got it running last week but it still has lots of work left). You start off the bat with the oil filter. I have a 2008 MTD that still runs smooth in 2022 with no oil filter. I change the oil every season just as you would with an engine with a filter. Kholer motors are notorious for not being mechanic friendly. I would advise in being very careful when adjusting the rockers as the cover will give you issues. This is an updated engine so hopefully they fixed the oil leaking issue, but they probably still have the 6 bolts compared to B&S 4. If everything is the same as you say, then I assume the blade belt and drive belt routing are the same. Best to take pictures now before running that engine so you know how those belts run as the manual can get confusing.

My old Craftsman LT2000 died after almost 15 years & not a lotta love!! Like my ol' Cajun friend used to say, "you jus' put th' gas & geaux!" Simple!! Having a hard time getting used to this Bronco! It's cost me over $600 (½ orig cost!) for 2 Service visits & small electrical problem (blown fuse They Couldn't Find!!) & couple of blades, oil & plug. As a Senior, the gas pedal is a bear to hold down for an hour!!;)) Kig, could you explain the gears/tmsn again for me? Has forward & reverse - how do I engage the other gears (says 7) - real mystery to me!! Great video!! Thx! ATB&God Bless!! jim, ¹rcs!

Do you know which transmission it uses? Im trying to avoid the tuff torque K46.

@mopar0IIII0jeep

5 жыл бұрын

The K46 isn't as bad as it may seem. The greedy tractor manufacturers are to blame for most of the k46's short comings. Tuff torq (the company that makes the K46) calls for 50 weight oil to be used and replaced on a regular basis. The tractor manufacturers fill this trans with 10w30 due to costs and also require Tuff torq to not add a drain plug for additional cost savings then the tractor manufacturers claim it is sealed and non serviceable. If you search for videos on how to change the fluid you will find it is possible and it is a pretty decent transmission when serviced properly.

@michaelwittman1935

5 жыл бұрын

Well I would agree with you but until you try a specific company you will never know what oil they use JD used bad oil in my L130 and my tranny failed. As far as I can tell Tuff torq has not changed the blue prints very much and they could make it much better and easier for users to change fluids and basically maintain it. They are the only tranny manufacture out there for low end tractors so they can influence how the buyers use their transmissions. At some point the lawyers are going to have to step in with a class action lawsuit. I have received two checks from lawyers in JD settlements so far.

@mopar0IIII0jeep

5 жыл бұрын

@@michaelwittman1935 in my research (I wish I had a link for you) I found a reply to a comment directly from Tuff Torq. They stated that they build units to the specs of the tractor companies and most insist on no drain plug for cost savings. Tuff Torq also stated that they cannot ship units with fluid in them and it is up to the tractor manufacturers to fill them during the tractors assembly, Tuff torq even said that most fill their units with 10w30 for cost savings and not the recommended 50w that Tuff torq suggests. Tuff torq also suggests replacing the fluid after the first 50 hours of use then every 200 hrs after that. I think if you follow these guidelines for fluid and service intervals they are actually a pretty reliable transmission. To be honest it is going to be hard to find a residential yard tractor that doesn't have a K46 unless you go with a manual shift trans or one of the CVT transmissions that most manufacturers are now offering The down side there is the CVT uses a plastic transmission case. Good luck with your next tractor. Hopefully it is a better experience for you, it really sucks to invest so much into a machine to have it fail due to profit margins for those who built it.

@michaelwittman1935

5 жыл бұрын

Thats 100% true if the vendor in this case Tuff Torque wants to damage their reputation by selling to spec equipment im sure they know is inferior. I make products as well and I know what your talking about but like my company we too make a product thats almost a monopoly so we have the power to say NO we are not going to make a product that makes us look bad and leaves us open to liability of workmanship. But I do understand the pressure to just make it barely passable. We shale never make an inferior product our reputation is worth alot more to us then keeping a buyer happy.

@Mr_Tecumseh

5 жыл бұрын

@@michaelwittman1935 The Tecumseh Peerless was the best 20 -30 years later most are still in service...

after all this time do you or anyone else feel like the bronco is a good buy from home depot / lowes or do you feel like you should have gone with a cub cadet or something else..?? getting ready to buy my first riding lawn mower

@Mr_Tecumseh

5 жыл бұрын

The cub is made by the same company.

Do you have a Home Depot where you live, as they carry the TB Bronco. Thanks for the great info and I’m on my way to purchase this Bronco at HD for $2199.00. 04.01.23

I have the troy bilt bronco 46in cut with the 19hp briggs n straton

i just bougt a 2020 troy blit bronco for $550 less then 3 hours from a guy and said his dad used it 3 times befor he got sick and passed a way i love mine 42 cut 19 horse with a dump trailer how did i do

Just bought one, at least here in east TN they're being sold by Home Depot. Took forever and a day to get the damn thing delivered (they didn't even have one at the store, had to order it online). If this thing has a problem I suspect I'll be screwed for weeks waiting for parts or replacement... but that may be true of every mower company with how messed-up everything is right now.

@HbCon22

2 жыл бұрын

Where in East TN?

I have this mower and all I've done was but Steering Shafts and all the things that goes along with the steering. Getting ready to put the 3rd shaft on and steering gear! Please let me know if you have any problems with the steering! Thanks

@brokedownrides

2 жыл бұрын

I just finished replacing a steering shaft in my 2014 Troy built pony 😂

i know this video year old but just bought one last month now the new troy builts are only using the Briggs motors my 2019 Bronco is a 19Hp Briggs ive used the mower 3 times so far its been good so far

@william38022

5 жыл бұрын

Mikey Ownz Depends on the model and who is selling them Rural King sells a pony looks real nice very roomy I’m 6 foot 318 pounds and it fits me very well lots of room with some room left over actually for even bigger guys,,,,very impressed with that,,,however it has an MTD Briggs & Stratton knock off version of an engine don’t know if that’s good or bad???42 inch deck,,,I believe right now they’re being offered for $1099 I’m tempted,,, very tempted and from what I can tell craftsman huskies Troy built and a few others are all pretty much the same mowers with a different name plate,,,, I’m talking gear driven that has the reverse neutral and forward gear selector on the fender with the actual speed selector or gear selector on the dash like a hand operated throttle.

@JoshSmith-wo7zw

3 жыл бұрын

Give it a couple of seasons and you'll get sick and tired of dumping money into it. There junk. Hands down worst mower I've ever owned.

@MikeyOwnz

3 жыл бұрын

@@JoshSmith-wo7zw i still got mine on its 3 season haven't done anything to it other then change oil and put gas in it changed the air filter

@dogslobbergardens6606

3 жыл бұрын

There's always some that say it's complete junk and some that say they've been using them forever without a hiccup.

Any update? I just bought this lawn mower

@treymecsko4238

5 жыл бұрын

Andrew Arbogast how much is it

Mine goes faster in reverse!????? How do I fix this?

Tactor suppy should have it!

Damn nice mower brother!

@KIGOutdoors

6 жыл бұрын

Chad's Adventures thank you man.

I don’t know if the Kohler engine will make a big difference in that and it depends on who selling them Rural King offers one for $1099 that is one super nice looking lawn tractor with lots of room and it has their own engine on it,,,,well I believe it’s an MTD Briggs & Stratton knock off,,,,don’t know anything about those engines however $1099 for a brand new 42 inch deck rider that will accommodate the smallest of riders and the biggest of riders is one heck of a deal I don’t care if they had a harbor freight predator engine on them that’s a darn good price,,,,flat out man.

Wrong on not having an oil filter, my 97' John Deere GX85 13HP Briggs running beautifully to this day

Some lady contacted home advisor to haul this unit away I was thinking bad engine or bad trans or just needs a carb clean out looks almost new and fires right up and drives now time to clean it up and sell it

I would advise any one looking to buy any lawnmower to inspect it carefully .I learned the hard way troy built does not back it's product no customer care .I bought a 2016 troy built bronco from lowes and it has a 46 inch deck bracket that holds the pulley and brake pad on the discharge side and brake pad does not sit right and it gets burned into .I saw the stamped 46 inch on 3 spots on the bracket and sent pics to troybuilt and was on the phone with tech support for over an hour and they keep trying to tell me the bracket is right .Then why would the brake pad bracket set sideways to the pulley ,you can see it on my video of troy built mower HELP so you can make sure you do not end up with this problem .It is a 42 inch bronco deck .I have a cub cadet bought just months before this one since I have 3 acres and so far under warranty they have replaced the idle pulleys and the drive belt .I also learned that troy built has 2 drive belts that are probably harder to replace .The cub cadet is easy to replace and decided while i was at it I would replace deck belt also with kevlar belts .I am pretty sure a lemon is a lemon and this troy built is a piece of the lemon .I am now looking myself for the bracket and will need to replace it myself to maybe salvage a brand new lawn mower .I take very good care of my mowers .Look before you buy and look at videos of how these mowers work and are put together ,sad because how do you really know what you are buying

Briggs or Koeler, if it has an oil filter, then it has a pressurized oil system...

@darrylbonner2575

4 жыл бұрын

"Koehler"

I have over 1000 hours on my ‘97 kohler

@Dastardly84

4 жыл бұрын

The Commands were the best.

Being a Deere guy, I wish John Deere kept putting Kohler engines in their lawn tractors. I feel the same way about Briggs and Stratton, horribly made engines, Kohler is the better made counterpart of Briggs and Stratton. The Troy Bilt tractors seem to be great tractors, but I’ve been stuck to John Deere since childhood. Happen to have a 1985 John Deere 112L hydro with a 15hp Kohler single and I absolutely love it.

Home Depot sells troy built in KY :)

I had a Troybilt and the Briggs engine was the best part of it. Now I have a Husqvarna with a Briggs. I would take the Husqvarna over Troybilt any day.

@dogslobbergardens6606

3 жыл бұрын

I noticed the man in the video kept saying he *heard* all kinds of bad things about the Briggs motors... but then said he never actually had a problem with one... and THEN said, "Oh yeah btw my other Kohler broke the piston rod, they gave me the run-around and finally had to send me a new mower." That's not very confidence-inspiring for Kohler! LOL

I would love to know why manufacturers put head lights on these !

@JonathanGrandt

3 жыл бұрын

I imagine it’s so the operator can see in the dark...

@david9783

2 жыл бұрын

I think it is the only way to really make them look like real insects, which they resemble.

I just bought one and it has a B &S 19HP intek, 540cc, no Kohler motor.

You can get them at Home Depot

There is a 3rd difference between the Pony and the Bronco besides the motor and price. The Bronco has this wheel attached to the cutting deck. The Pony doesn't have these wheels on the deck. Also the Pony doesn't have a oil filter either. Home Depot sells Troy-Bilt and Lowes sells Craftsman now. They are close to the same in every way. Even the extra attachments can be used be both. Hey it has been a year now. Where is the 1 year review?

Bradstreet motor shows Carburetor top Kace with out leaking

This is a very sturdy and well built mower. I thought I wouldn't like the foot operated speed control but after one use kzread.infoUgkxTZSPVwJFBv2hORqhQamtxi-tAe5K2EtC , I can't believe I ever had one without it. It drives like a car with an automatic transmission. Easy to adjust mowing speed according to grass depth/thickness. I have yet to get used to the long throw of the blade engagement lever but kind of get why it is that way. It allows you to hold mowing for short moments if you need. The engine seems very substantial and the frame has very little flex, both adding up to an impressive package. All my previous tractors were 18 to21 hp with 42in decks. This one is 23/46. I mow about 1.5 acres about every 5 days here in Alaska and that mowing time has been reduced by about 20%, partly due to the very tight turning radius. No loop arounds lol. Hour meter, cruise control, reverse mowing capability,deck cleanout and easy assembly all add up to a very well thought out tractor.

belt will fall off after a few seasons watch out not from wear but the pullys under the deck will pull thru the deck weak metal ,mine kept tossing the belt and i didnt catch what was going on so be sure to look at the deck top where belt tension is when engaged there is a bolt and it will pull thru the deck top eventually at first it will waller out and thats when the belt starts to toss after that the whole thing will finally toss the whole part off proball slice the belt like mine did so if it starts cutting belts of tossin them off look at that piese asap ! the bolt can be seen from under the deak where the blades are as well be sure to look at this cos grass will hide the problem and you wont see it coming bam no hint cept the belt comes off at first when its still a fix once it come full apart its a hard fix might need a new deck i was able to rig it but it is unsafe cos its is always engaged or i have to bang the pully tight the cheap deck metal is the culprit on this junk dam thing still runs great but the deck is a POS some one send me a deck or know what other kind i can put on my troy thing runs have had it several years

I have a mower with a Briggs. Breaks every year, and cost $350 to fix. You sold me on this, but when I check it also has a Briggs! bummer.

I bought my bronco used for $100 with a bagger system, guy couldn’t get it to crank when I arrived..I made $100 offer, got it home and it was a $.25 fuse under the seat

Bought it two years ago and it’s been nothing but problems. So many times I’ve called a repair man for pins, transmission, tires, engine , gas pedal issues, etc. will never buy another one ever.