Best detailer on KZread. Hands down..

@High-Performance-IQ

10 ай бұрын

No Hands up

Sandro, I absolutely love your videos mate. Extremely clear and informative. Not many youtubers like you mate. Keep it up!

Great job as always. You leave me with all the answers and no questions to ask. Thank you

The time you put into your testing is obvious and beyond what most KZread channels do. 👍👍👍

It’s 3:30 am in Dayton Ohio USA and I’m up watching this master piece

Always chasing perfection, your dedication to your craft is inspiring!

Thanks to share this content, all your videos came to us ,detailing lovers,enthusiasts or profissionals as something to improve and get better results as possible! You're a good profissional and a good person i've been learning a few things watching your videos, thanks a lot. Cheers!

Great review 👍🏻, don’t miss any of your videos, very informative and educational, thanks

Wanted to say i picked up CarPro BugOut and it performs really nicely for removing bug messes. It seems to just dissolve the bug mess and doesnt compromise the Cquarts coating!

I really appreciate the amount of work that goes into your videos. 👍🏻

Top notch review as always Sandro. Really appreciate the time you spend on these.

An other superior video Sandro! It was a close call but you made me decide which compound I gonna ad to my arsenal, If you setup a test, you eliminate as much variables as possible to see the real working of a product. Its worth you time making the video trust me!! Solid finish with the Scholl on a rotary respect!!

Another great informative video! I alway learn so much about the different products you review

Brilliant review. Thank you for all your amazing work mate. So comprehensive and informative. Five star content.

@CarCraftAutoDetailing

3 жыл бұрын

Thanks you mate!

You have been most professional in all your tests. You have clearly assisted my knowledge of techniques that improve the use of compounds and other products. My hats for all your efforts at educating. Best regards.

@CarCraftAutoDetailing

3 жыл бұрын

That’s really great to hear, thank you!

@yigitmert4232

Жыл бұрын

@@CarCraftAutoDetailing Which of these 3 products do you think I should use is more permanent and the effect is long.... i was caught between auto glym alex hybrid, scholl s20 black real and 3d 510 cake, which one do you think I should buy you seem to be very experienced in this regard

@yigitmert4232

Ай бұрын

​@@CarCraftAutoDetailingselamlar.scholl s20 black real ile kochchemi h902 arasında hangisi daha iyi daha mantıklı her yüzey için

Great review like always! Thanks for all the efforts into these great videos!

I learn so much in this channel, ty keep inspiring. Thumbs up 👍🏻

Mind blown on the number of ways you can influence the outcome of your compounding step 😅

Would be interesting to see how easy these compounds are to use in a very warm-humid environment. I'm a bit of a Scholl Concepts fan boy but it seems people are getting really nice results from the Rupes and their work times seem really nice. My working environment is warm and very humid so i really love these oily and lubricated compounds....some of the "chalky" compounds tend to flash and dry before my set is done and the lubrication goes when that happens. I learned from you its really important to judge the product for your work environment because they all act differently on the conditions etc.

Good day Sandro. Just wanted to say you are one of four or five men in this industry I look up to and aspire to elevate myself to. Such inspiring talent, I always learn from each and every video. Thank you, be safe mate 🙏🏼

@CarCraftAutoDetailing

3 жыл бұрын

I appreciate that mate, it’s really very kind of you to say so, thanks!

Good afternoon Sir, I’m sure we all really appreciate how much time and effort you put in to give us such comprehensive content. Amazing work as always Love from the uk 🇬🇧

@CarCraftAutoDetailing

3 жыл бұрын

Thanks as always Mark!

@arthurlekov2947

3 жыл бұрын

@@CarCraftAutoDetailing Good afternoon, I wanted to ask this question about the shelf life of UK 3.0. I was wondering if I could still use the product after its been used and after a year of sitting in its box. And if you can still use it after its shelf life, does it mean that the product will not have the same protection. Thank you, have a nice day. You are detalier that I love watching and I have learned many things from your channel.

@CarCraftAutoDetailing

3 жыл бұрын

Generally, I would say use it up to a month after opening the bottle to be sure you’ll get the best performance and user experience with it, and I’d also say that if you store it in a cool dry shaded area it will be most likely still be fine a few months after the expiration date. Will it still work beyond that? Chances are yes, but it may effect the user experience making it a bit more difficult, and it may also effect the performance.

@arthurlekov2947

3 жыл бұрын

@@CarCraftAutoDetailing Thank you very much, your information was very helpful. I will have to decide to use it on which vehicle so I can get the most out of the bottle.

I just got some rupes coarse. Can't wait to try it. Great video!

Thanks Sandro freezing my rocks off in northeast part of US as winter sets in love your videos

@CarCraftAutoDetailing

3 жыл бұрын

Thanks mate, and it’s quite the opposite here as summer closely approaches!

Great information Sandro Thanks.

Hey Sandro! There are no TIES in detailing!...Pick one darn it! 😂 Seriously, great video Sandro. It’s great that you have 3 new heavy hitters on the scene that has raise the bar considerably. This is a win win win for all 3! Again, thanks for the hours of work you put in to bring us exceptional feedback from products you have put to the test. You are second to none! Good day mate!

@CarCraftAutoDetailing

3 жыл бұрын

Lol, appreciate it mate!

I have the new Rupes Coarse Blue. Nice, but dusts too much. I also have TLC + which is fantastic. S2 Black I will have to try. No dust, cuts great and finishes the best out of the 3. Not too concerned about a bit tougher wipe off.

sorry for offtopic but cant wait for your reviews of new CarPro products released this month

S2 black is phenomenal the cut is amazing but it still finishes so well on a lot of different paints ive tried it on. Will give the others a go and see if they compare. Rupes just seems way overpriced compared to every other compound

Sandro i wanted to say i love my Car Pro CQuarts UK 3.0 coating. Followed your technique and its holding up just perfectly.

@CarCraftAutoDetailing

3 жыл бұрын

Great to hear!

Nice work very informative 👍 I have been turning in my sleep weather to buy rupes, last cut ,3D one or even Koch chemie! I am currently using menzerna 400 for heavy cut and menzerna 4000 scholls A15 and scholls s20 for medium cut! I haven’t been disappointed in menzerna really great product and yes expect for s20 for medium cut ! Scholls has bean abit of a let down really. for overall compared to menzerna I have ordered some Koch but I think I will get the rupes even at the premium price it is! For me as a Enthusiast first and a buisness owner second! Time and Quality I think rupes is the best option!

Information overload 👍🏻😁😁 another splendid video Sandro , I am sure you could of carried on to hit the hour mark as you done well to get all information in under 30mins tho 👍🏻😁

do you have a video talking about your machine polish technique and specifically how important it is to not allow pad stall? I keep reaching for my Forced Rotation because I keep getting pad stall on the DA. But the DA does give it that extra pop for the final finish.

One thing that seems to be true is that individual preference, approach, and style plays a significant factor when pairing up with a set of abrasives liquids. From there it's learning how to "dance" with them. It's a fun process, somewhat frustrating, a bit costly, but in the end satisfying.

Sandro great comparison . I would like see the Rupes compound used with their inew blue foam and or wool pads since they have been designed to use together. They may have done better as a combination. I know that TLC doesn't make their own pads but Scholl does make their own pads. I not sure if Scholl designed theri pads with this compunda at the same time. I Loved the full fairness and detail of this review. Jason Rose at Rupes Academy recommends 3-4 on machine speed and foam and wools they say finishes out the best.

@CarCraftAutoDetailing

3 жыл бұрын

Thanks mate, and there’s certainly so many more pad combinations and techniques that can influence the results with each of them!

Epic video Sandro

Everyone has already said everything I wanted to. My only comment is on the Rupes DA Coarse compound and how it's dusting is such a let down and deciding factor for me. Today's compounds and polishes are so advanced in their application, working time, low/no dust, sun friendly, and easy wipe off that a high dusting compound/polish in today's soft and thin clear coats is not good enough and is a major deciding factor for most. Again, thank you for this amazing informative video. Be safe.

@danlc95

2 жыл бұрын

I'm able to keep the dust low by using a smaller amount of product on their wool pads.

@jkroemer2685

2 жыл бұрын

I believe it's due to them using non diminishing abrasives. It's designed for very short cycles...maybe 2 or 3 passes max.

Dang i knew about Rupes' Compound but those other two are impressive as well

Thanks Sandro. Another great video. I finally got around to getting 3D's ACA compound. I wanted something more aggressive than the compounds I already had.

Used all of them. TLC+ is easily my favorite.

S2 Black has worked so well for me on a Blue HDO foam pad that I’m worried to coat over it after multiple panel wipes for fear of fillers, because it works THAT well! TLC+ has been lovely, and the new D-A Coarse has been alright but I am a bit underwhelmed with it so far. D-A Fine has been amazing though! Appreciate the video Sandro 🤘🏻

@CarCraftAutoDetailing

3 жыл бұрын

I appreciate you sharing your thoughts and experience with them, thanks!

@JordanWells

3 жыл бұрын

@@CarCraftAutoDetailing You’re welcome Sandro! Also, glad to see you do a brief (but harsh) chemical resistance test on Nv Nova Pro...Nv is new to the US and I’m one of only 3 Nova Pro installers here at the moment..the entire Nv lineup (Nova Evo & Nova Pro especially) have proven to be absolutely amazing! Very thankful to be apart of them over here

@CarCraftAutoDetailing

3 жыл бұрын

That’s great to hear, I’m sure you and your clients are going to love Pro and the whole Nv range!

Malco Tru-Cut Heavy duty compound gets the job done very nice and has a affordable price.

Well, another very impressive and attention to detail video Sandro. The only problem for me is that just when I thought I had it worked out as far as the best Compound to have, you then show us a new evolution of the breed. I have used TLC and loved it. I also love S20 Black. But obviously, the new TLC+ has that extra bite that I would have liked when I used it on my very hard Astra paint. So does the original TLC have a slight edge with finish compared to the TLC+???? Because I could not really separate S20 & TLC for their great finish on my hard paint. Given that they are all very good and similar, for me, it would be S2 Black based only on its cost/value. Just out of curiousity, what resolution did you film in??? Just my 720p Computer doesn't quite let me see the white paint results that well. Thanks again Sandro. Well done

@CarCraftAutoDetailing

3 жыл бұрын

Thanks mate, and you may not see a difference on hard paints, but on medium to softer paints I did personally tend to get a better finish with TLC+ compared to TLC, and S20 unquestionably finishes better on medium to softer paints. The video was filmed in both 4K and Full HD.

Great video sir

I've been using all 3 of these and my favorite is TLC+. Have you tried 3D One?

Waiting for the new finishing polishes, from rupes and the other ones.

Excellent video and analysis of these three compounds. Does one of these formulas help you complete a 1-step correction faster when cutting with Rupes wool pads on the LHR15 or Mille?

@CarCraftAutoDetailing

3 жыл бұрын

Thanks, and it really depends on the things I covered in the video like your personal style or preference with technique which translates over to almost all pads.

Try karros labs p20 p30 p40 and p50. Some of the best compounds I've ever used

Love your videoes!! Just picked up the new blue Rupes, after have been using S2 black som time now, and have the same experience with it. S2 and S20 are probably my favourites atm. Have you tried any of them om the Rupes wool pads?

@CarCraftAutoDetailing

3 жыл бұрын

Yes I’ve tried them with the Rupes wool pads and it’s a fantastic match

@CarCraftAutoDetailing

3 жыл бұрын

I’d tend to agree about the backing foam not being as durable as it should and I’ve actually mentioned this in a past video. But the best thing you can do is work with about 3 pads at a time and swap them out frequently to allow them to cool as heat seems to be the main reason that kills the backing foam. But I love those pads so much that I just deal with it, but I do wish Rupes would address it!

I use Rupes Coarse with yellow rupes pad. That dust and fling a lot.

I'm going to try the Rupes when my M105 runs out

@mastacrx

3 жыл бұрын

Is 105 and 205 good on BMW paint? I seem to have a problem with heavier swirls using orange hex pad...

Sandro great work as always! Do you have a baseline pad/polish combo that you employ on certain manufacturers vehicles? Such as: Audi i always start with this pad/compound and finish with this polish and Porsche is this plus this? Just wondering after you doing thousands? of vehicles you have developed a pattern. Thanks from Texas.

@CarCraftAutoDetailing

3 жыл бұрын

Thanks, but the condition of the paint, it’s thickness and the customers goals also play a large part in which pad and level of correction I pursue, so it’s really always changing and adapting to each new job.

From 17:30 the music and conclusion sold me out!...

PLease Please test the new Gyeon Wax and there new QD -

Awesome review like allways :) have you tested gyeon compound plus?

@CarCraftAutoDetailing

3 жыл бұрын

Thanks, but no I haven’t

Good video

Great work testing these compounds, if its possible can you test some Sonax polishes? Like Ultimate Cut 6-3 and Ex04-06

@CarCraftAutoDetailing

3 жыл бұрын

Thanks, but unless something has changed, Sonax just hasn’t been sold here locally for many years.

@kai_291

3 жыл бұрын

@@CarCraftAutoDetailing mhm looks like I need to send you some stuff😄

@jonoklease5562

3 жыл бұрын

@@CarCraftAutoDetailing cutmax and perfect finish etc is available from the Detail shed and autobuff, both very impressive & versatile compounds Sandro, I use them everyday. Great vid mate 👌

Whats your thought on KochChemie compounds? They have been getting a very good wrap world wide.

@CarCraftAutoDetailing

3 жыл бұрын

I only have limited experience with them but I agree that they seem to have a good reputation

Hi Sandro I think the work you do is fantastic, I was always under the impression you got the best from the Bigfoot machines on a speed set between 4-5 but I noticed you had them working at 6 and 5 is that a normal thing you do? Jason

@CarCraftAutoDetailing

3 жыл бұрын

I’d say 4-5 is where I’m most of the time but I also use 6 and 3 at times just depending, thanks!

Great vid as always.. Always enjoy your content.. But where would you class Sonax Cutmax between all three?

@CarCraftAutoDetailing

3 жыл бұрын

It’s hard to say when you don’t directly test the compounds or have extensive experience with them, but based on limited experience with CutMax I don’t feel it would finish quite as well as these compounds or have quite as good a user experience, but it’s cut may be comparative - but don’t hold to me to it.

@Silent_Panda

3 жыл бұрын

@@CarCraftAutoDetailing thanks alot for your opinion.. keep up that good work

Great vid as always Sandro, one question what cutting pad was that on the Rotary? Cheers

@CarCraftAutoDetailing

3 жыл бұрын

Thanks, and I believe that was a Lake Country SDO LL wool pad.

@dantom5634

3 жыл бұрын

@@CarCraftAutoDetailing thanks Sandro for all your help and advice. Would like to see some reviews on the Osren compound and polish range. Once again thanks.

Did you finish the entire top with 4000 grit? or was it just that one section?

Is it possible for you to explain your specs on the Rotary polisher..... which one, backing plate and Foam pad size

@CarCraftAutoDetailing

3 жыл бұрын

I believe in that video I was using the Rupes LH19E rotary. I tend to use quite a variety of pads, the new Rupes rotary pad range is actually pretty good and I’ll mostly use it with 3” and 5” pads, sometimes 6” as well. The larger backing plate is the one that comes with the polisher but I also use the Shine Mate 1” to 6” rotary backing plates.

can you please use dark test panels in the future it was really difficult to see the results on that white test panel in the 1:20ish mark

@CarCraftAutoDetailing

3 жыл бұрын

Yes as you probably know I do almost always use dark paints in my reviews as I also did here

Awesome mate could you do a review on 3D line up of compounds? Preferably ACA Range ?

@CarCraftAutoDetailing

3 жыл бұрын

Thanks, and I did a past review and comparison with 3D ACA 500 kzread.info/dash/bejne/pqKfxcWDZNLSc7g.html And I’ve also reviewed a couple more of their compounds in the past, but there will hopefully be more in the future.

@bbdetailing9123

3 жыл бұрын

That's an excellent video that I've seen multiple times

Like always... Very informative . Thank's. Have you tried Shine Supply Chop Top? Looks like another high performance compound.

@CarCraftAutoDetailing

3 жыл бұрын

Yes I have tried it and I do think it’s quite a good compound, I also really like Classic Cut

@pavelmartynovic8761

3 жыл бұрын

@@CarCraftAutoDetailing Any chance to see review of Shine Supply polishes and compounds? Your tests and reviews is very important for me. Shine Supply is not available in my country. So it problematic to just pick up few bottles for testing :(

@CarCraftAutoDetailing

3 жыл бұрын

I have reviewed some of Shine Supply’s other products but I’ll also hopefully have more reviews on them in the future!

@pavelmartynovic8761

3 жыл бұрын

@@CarCraftAutoDetailing Glad to hear that :) Yes I remember your early posts :) Well, again, thanks for your videos.

👍👍

Do you feel Tlc+ favors microfiber pads like the original or is it more flexible with foam and wool pads?

@CarCraftAutoDetailing

3 жыл бұрын

I would say it tends to excel on both microfibre and wool pads as far as cut goes, but reduce the amount of product on an intermediate foam pad and it can finish quite well depending on the paint type.

Good evening Mate! Where would Shine Suppy Chop Top, or Griots FCC stand among these 3? Thanks for the amazing content Sir!

@CarCraftAutoDetailing

2 жыл бұрын

In my experience Chop Top cuts very well and potentially to a similar level but I don’t feel it finishes quite as good as these overall. FCC on the other hand tends to finish very well but I don’t think it has the same level of cut. I’m no authority on those compounds but that would be my assumptions based on my limited use of them.

@hayden199516

2 жыл бұрын

@@CarCraftAutoDetailing thank you for your time, sir! I’ll pick up some TLC+ and give it s go. Have a great day and stay safe!

@bbdetailing9123

2 жыл бұрын

@@CarCraftAutoDetailing Thanks Sandro (yes, i watch and refer back to older videos/comments, hehe)

What about trim stains? The last cut doesn’t stain trim?

Suggestion: Could you do the same setup with: Rupes DA Fine Compound, Sonax EX04-06 and maby the Labocosmetica Leale? 🙏🏾

@CarCraftAutoDetailing

2 жыл бұрын

Rupes Fine is more of a medium compound in my experience, it does cut petty well and may be closer to Perfect Finish or even Cut & Finish. I’d like to include some Labocosmetica compounds in the future, do seem to perform quite well.

@MrStormy1978

2 жыл бұрын

@@CarCraftAutoDetailing Thanks Sandro. I think the followers would lovee to see you use the Sonax EX04-06 in particular. At least in germany its one of the most used and loved 1 Steps. It does cut less than Scholl Concepts S20 Black.

👏🏻

which is the best? number 1?

Why don’t you compare it with Zvizzer compounds and their new All rounded pads.

What is the name of the song at 18:34. It is so mesmerizing ... it makes me forget what I am doing.. polishing of course. ;)

@CarCraftAutoDetailing

2 жыл бұрын

Glad you liked it but I’m not specifically sure what that track is called but all tracks are listed in order of play in the description box

Do you always run your machine on 6? Rupes told me 4.5 for cutting 3.5 for polishing

@CarCraftAutoDetailing

3 жыл бұрын

Usually 4-5, I explained in the video that I was taking you through some of the testing process which means trying my diverse techniques

Sandro - I have been using both UltraCut and TLC+ a lot lately and I absolutely love both. Having played with the 2-3 main polishes from Shine Supply, how do you think they (Classic Cut / Flat Top / Chop Top) are in comparison to UltraCut and TLC+? I see many raving about Flat Top, but in my experience it is only very effective cut-wise in extremely small sections, and although it works quickly, I feel like I end up taking longer overall due to having to work such small sections and re-do areas if I work too large of a section. I’m sure you have a lot in the works, but I would *love* to see some of the Shine Supply polishes compared to TLC+/UltraCut/S2 Black etc

@CarCraftAutoDetailing

3 жыл бұрын

Just like you I know a few detailers that absolutely love Shine Supply compounds, but for be personally I think both Classic Cut and Classic Polish are the ones that I’ve had the best success with and I actually like them a lot. I’ve not personally have the same success with Flat Top and Chop top which are more closely matched to Ultracut and TLC+ in terms of levelling abilities. I find I don’t get as much cut or as good a finish but maybe that’s just due to my style of paint correction - we are all different 🙂

@JordanWells

3 жыл бұрын

@@CarCraftAutoDetailing Thank you for the reply! I completely understand and agree - Classic Cut & Classic Polish are my favorites, Flat Top and Chop Top seem to let me down more often than not. Wanted to ask one more thing - when it comes to leveling abilities in UltraCut, S2 Black, and TLC+, I have found S2 Black to be rather weak compared to the two the more that I play with them all (even trying to tweak my approach), but I know that is not the experience you’ve had. On moderate to harder clears, do you find microfiber or wool to be more aggressive? Big fan of both LC Low Lint Lambswool and LC MF, usually I will break out a rotary for super hard clear coats but still curious

@CarCraftAutoDetailing

3 жыл бұрын

It really depends on the specific pad for me. I’d say the Lake County SDO LL pad is the fastest cutting pad I’ve used, though it’s not all that smooth on DAs but nicer of rotaries. The HDO LL wool pad is much nicer and more comfortable to work with but not quite as aggressive at cutting harder paints. Apart from those wool pads I’d say on a DA both the LC and Meguiars microfibre cutting pads are the next best defect levelling pads and should also finish much better, but the Meguiars just suffers from excess heat much more than the LC ones.

@JordanWells

3 жыл бұрын

@@CarCraftAutoDetailing Thanks for your time Sandro, always incredibly helpful. 🙌🏻

@bbdetailing9123

2 жыл бұрын

@@JordanWells Oh funny coincidence. I just messaged you on IG about your shelves!

Hi Sandro! I’m sorry to continue to bother you with comments this week, but I’ve been struggling with something and wanted to ask a quick question. Overall, I have had very good luck with finishing from Rupes’ DA Fine on all but the softest of paint systems, and of course Nv Finesse as well..it is about as perfect as it gets imo besides the dusting. I have not had good luck at all with Rupes’ UNO Pure, however. No matter what combination of pad/polish/speed/pressure/etc I try, I cannot get it to finish down 100% on any paint system at all. After a Throwback or Clarity wipedown, I will always still have some scattered DA haze left behind from the UNO Pure step, because they weren’t apparent in the previous cutting step. Have you had good results with Pure? Do you have any tips? I really want to figure it out, but I’m highly frustrated.

@CarCraftAutoDetailing

3 жыл бұрын

No, I’m probably the same as you in that regard. A lot of these super fine usually non diminishing polishes like Uno Pure, Scholl S40 and Shine Supply Classic finish usually don’t finish as well for me 90+% of the time. There seems to be more rare cases on some paints where they do work extremely well but that’s more of a rarity rather than the norm. I guess what I’d also say is that I do tend to have better success with them on rotates rather than DAs and also when using extremely small amounts of product on my pads and at lower machine speeds. Personally I just keep them as trouble shooting polishes and don’t really tend to grab them unless my usual polishes just aren’t working.

@JordanWells

3 жыл бұрын

@@CarCraftAutoDetailing Funny you mention S40 and Classic Finish as I have had the same exact issues with them as well. I am yet to try Pure on rotary or gear driven, but I have just had the worst experience with it from a finishing standpoint on a Random orbital every time I’ve tried it. I hate that but I am glad to know I’m not alone. Classic Polish is much better than Finish, but you do have to work it a very long time in my experience which is not always enjoyable for me. Finesse is about as perfect as it gets imo, I just wish it dusted less! Thanks for your time Sandro. I will try and leave you alone and just enjoy the videos 😂

@CarCraftAutoDetailing

3 жыл бұрын

Anytime mate! I’ve also heard that Shine Supply is bringing out a new version Classic Finish so I’ll be quite interested in trying it out!

@JordanWells

3 жыл бұрын

@@CarCraftAutoDetailing They did, Classic Finish Plus! I actually just received it yesterday and tried it, and sadly it didn’t seem to perform much better than the original. However, I only tried it on a single panel so it’s hardly a fair comparison. Ended up cycling out Classic Polish on an Orange HDO but it took a very long time to cycle down, with a pad blowout in between which is quite annoying to me..I like a quick finisher if possible. Looking forward to seeing what you think! Jace/TLD (TLC) will also be releasing a finishing polish at some point, I have a small sample to play with at the moment which I’m excited about!

I notice you are using the Rupes Mark 2 21". Is that the 5" backing plate on it? If so, how does that work for you? Debating if I should go that route as i have the same machine. thanks bud

@CarCraftAutoDetailing

3 жыл бұрын

It’s actually the LHR15 with the original backing plate not the 21. But I’m personally not a fan of switching backing plate sizes as it makes the machine run rough because DA polishers have specific counter weights set up for specific sized backing plates and rotational throws.

@MrBod4life

3 жыл бұрын

@@CarCraftAutoDetailing Oh my mistake I thought I saw a 21 on the front cap and yes you make a valid point. Thanks again

I have yet to find a heavy cut compound that finishes nearly as well as S2 Black!

@CarCraftAutoDetailing

3 жыл бұрын

Yes, it’s almost unbelievable!

@marksafady5986

3 жыл бұрын

@@CarCraftAutoDetailing 100% agree!

@sthochglanz

3 жыл бұрын

We can agree for 1.000%

Opinions on S2 black vs Shock2cut ? Their pricing where I live is almost the same ( 32 vs 34 ) so a test about it would be much appreciated :D.

@CarCraftAutoDetailing

3 жыл бұрын

I’ve specifically reviewed both these compounds on my channel and I also compared them in this video 🙂 S2C may cut a touch more than S2B but on almost every other front S2B is superior as just a wonderful heavy cut compound.

@dimmacommunication

3 жыл бұрын

@@CarCraftAutoDetailing Sorry but I maybe overlooked the videos cause I searched for it,my bad. How would you compare it to ACA 500 x-tra ? it's easier for me to get S2B (aside from price) ,as a friend of mine sells scholl.

@CarCraftAutoDetailing

3 жыл бұрын

I think ACA 500 is closer to S2C - both cut extremely well but don’t have the best finishing abilities or user experience experience, so if cut is all you’re interested in them maybe those two are a better choice. But if you also want a heavy cut compound that can finish quite well, dust less and be quite adaptable, then S2B would be the one.

@dimmacommunication

3 жыл бұрын

@@CarCraftAutoDetailing Thank's a lot 😃🤝

Hi, Sandro I have 2021 Escalade and really I need help to what ceramic I can install on it my 2 choices is a Gtaqnic sermalight or CQuartz Tio

@CarCraftAutoDetailing

3 жыл бұрын

I honestly think you’d be happy with either coating based on their reputation, but in saying that it’s been a while since I use CQuartz TiO2 and I really don’t have much experience with Crystal serum light, so I may not be the best person to ask.

@simplecardetailing6238

3 жыл бұрын

@@CarCraftAutoDetailing thanks so much I really appreciate your support by responding to me.

Another great Vid :) The S2 Black link goes to S20 Black. Does the S2 black one step as well as S20 black ?

@CarCraftAutoDetailing

3 жыл бұрын

S2 Black would overall be a better one step on harder paints, and S20 on softer paints

@sthochglanz

3 жыл бұрын

After using the S2 Black we would always finish finaly with a quick step of the S30+.

hello master. I would like to buy a polishing machine, but I don't know which one to choose. Rupes lhr15 mark3 or Flex xfe7 15.maybe you recommend something else.Many thanks.😀

@CarCraftAutoDetailing

3 жыл бұрын

They are both good polishers! What I would say personally, is if you get the Rupes, it might be worth doing the washer mod or getting the Kamikaze or Shine Supply backing plates for it, as it helps it spin more freely with less stall. If you get the Flex, just stick to using it with the 5” backing plate as it struggles and just stalls too much with the 6” plate and larger pads in my experience. There will be some more polishers from some brands coming out very soon, so it’s up to you if you want to wait and if you’re not in a hurry, but that’s all I can say 🙂

@mmcarspani1623

3 жыл бұрын

@@CarCraftAutoDetailing everything explained as always. Thank you very much. I would like to have a teacher like you. I will continue to watch your channel because it is the best. Lots of details that I can learn.you are the star.many thanks😀

@mmcarspani1623

3 жыл бұрын

@@CarCraftAutoDetailing kamikaze v3 backing plate andEXCEL EVOLUTION 5” BACKING PLATE this one is good one?

@CarCraftAutoDetailing

3 жыл бұрын

Yes it’s a great plate for the LHR

What you think about Juice N Cut or Q Cut?

@CarCraftAutoDetailing

2 жыл бұрын

I really haven’t tested it out so I can’t say.

I’m seeking your advice

Hey Sandro I was hoping to get Nova Pro on my new STI, is the best way to contact you for that through the concours detailing center website?

@CarCraftAutoDetailing

3 жыл бұрын

Facebook or Instagram is best, just send me a message, the links to them are in the about page of my KZread channel.

@aloo20

3 жыл бұрын

@@CarCraftAutoDetailing Thanks Sandro, will be in touch soon

the only compound I ever used by hand was meguiars ULTIMATE COMPOUND and polish. even forgot how it was I have no compound I have groftgate usa order from England polish .we are in autumn rain leaves are falling weather is soft and i wonder if in December we get snow today Sunday, November first only wash & wax, and the wax is www.24parts.nl/media/image/7b/3b/56/0S1832201.jpg mer original wax make the paint very slick in will be end march then iron remover polish clay bar and look sun start to shine a bit came from australia.C ya or see ya later

Another amazing lesson... Cheers

What is best recommended for a flex 3401?

@CarCraftAutoDetailing

Жыл бұрын

I personally don’t feel you need specific compounds for specific types of machines. The 3401 would sit in between a DA and rotary so you should see similar results in any case.

Great video. What type of pads do you use?

@CarCraftAutoDetailing

3 жыл бұрын

Thanks, and there’s on screen text in the video listing the pads used which are pads I do use quite frequently like the Lake Country HDO and SDO foam, microfibre and wool pad range, but I also use various Rupes and Shine Mate pads.

@DHenry-cs8up

3 жыл бұрын

@@CarCraftAutoDetailing thank you for the reply. As I watch the video again, I see that you described the type of pads that were used. Your technique is awesome. Would say how these compounds compare to Meguiars?

@CarCraftAutoDetailing

3 жыл бұрын

I still haven’t tried Meguiar’s newer M110 as I don’t think it even made it to Australia almost 2yrs on! Meguiars has a lot of compounds so it’s really hard to make a general comparison.

Where do you get your test panels from?

@CarCraftAutoDetailing

3 жыл бұрын

They sheet metal that I local body shop spray paints for me.

Profesional

What you think compound wizard cut mystic thank you

@CarCraftAutoDetailing

3 жыл бұрын

I really haven’t tried it so I can’t say

What would you use on fibreglass boats?

@CarCraftAutoDetailing

3 жыл бұрын

You can really use any of them on gel coats (which what boats are clear coated with). Gel coats tend to be harder than car clear coats and tend to mostly suffer from oxidation, so a wool pad and rotary polisher would generally be a good option for your cutting stage with a heavy cut compound.

@m.distefano84

3 жыл бұрын

@@CarCraftAutoDetailing Yeah ive been looking into getting a good cheap polisher, i think i might be getting the toolpro polisher-sander from super cheap and a good wool pad

@m.distefano84

3 жыл бұрын

@@CarCraftAutoDetailing Thanks for replying btw, and great content!

🤗👍

i feel like you really should be using a black panel for these reviews. its incredibly difficult to see the white thru a camera

Is it better than Meguiars M110?

@CarCraftAutoDetailing

3 жыл бұрын

Meguiars has decided not to bring M110 to Australian so I’ve yet to try it.

What is the best ? Sorry not understand

@CarCraftAutoDetailing

3 жыл бұрын

It’s not about one being the best, it’s about understanding that they are different, and based in those differences you can choose the one that best suits you.

Does Scholl Black have to be used on black paint?

@CarCraftAutoDetailing

2 жыл бұрын

No it’s great on all automotive paints and clears. The “Black” just refers to its specific line within the Scholl range.

@23hublock1

2 жыл бұрын

@@CarCraftAutoDetailing Ah cool thanks Sandro, I couldn't find anywhere that is was just for black paint, and hoped it would be simply a marketing thing. I used S20 Black yesterday on my 2007 Subaru in Crystal Grey....stunning results and great bang for buck at £20 GBP for 500ml. Panel wiped off after buffing off and Infinty Wax QDX Graphene on top. Loving it.

@CarCraftAutoDetailing

2 жыл бұрын

That’s fantastic to hear! S20 Black just about my favourite compound, it’s truly exceptional!

Should have showed on black panel

@CarCraftAutoDetailing

3 жыл бұрын

I showed two black panels in the video