Best Lawn Mower Blade Sharpener 2023? From $9 to $1200-6 Sharpeners Compared! Let's find out!

Тәжірибелік нұсқаулар және стиль

6 Lawn Mower Blade Sharpeners: RGB 950, Yellow Hornet, All American, tool rest with bench grinder, Arnold Drill Attachment Sharpener and hand file. Sharpeners compared for sharpening speed on mildly dull and on blunt 3/16 flat iron. Sharpeners also compared for accuracy at achieving a 30 degree blade angle. Finally, sharpeners compared for performance sharpening a mulching blade.
I purchased all of the blade sharpeners and supplies used to test the sharpeners to ensure an fair review. So, thank you for supporting the channel.
➡ Thank you for supporting the channel through memberships:
/ @projectfarm
➡ Thank you very much for supporting the channel through Patreon: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: project-farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
All American: amzn.to/46fSmbi
RGB 950: amzn.to/43Ss79g
Yellow Hornet: amzn.to/3CAf7sR
Tool Rest: amzn.to/3CAVe4S
Mercer Industries File: amzn.to/3CGWeo5
Universal File Holder: amzn.to/448Kw15
Arnold Drill Attachment: Available at Home Depot
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Пікірлер: 3 300

  • @DinDooIt
    @DinDooIt11 ай бұрын

    After 7 years of watching yt, this channel is the most consistent channel I've ever witnessed, never a disappointment.

  • @mohad6622

    @mohad6622

    11 ай бұрын

    ​@@ProjectFarmplease , do bathtubs different paint test and best & worst. With which one handles water

  • @mohad6622

    @mohad6622

    11 ай бұрын

    ​​@ProjectFarmp lease , do bathtubs different paint test and best & worst. With which one handles water

  • @xavxavv7827

    @xavxavv7827

    11 ай бұрын

    Bc" Boring white old man"

  • @Scoupe400

    @Scoupe400

    11 ай бұрын

    Totally agree.

  • @pandabear495

    @pandabear495

    11 ай бұрын

    @@ProjectFarm I have been using different Wood Hardening liquids but it would be awesome to see you compare them. It would be nice to see how wood fillers compare also. Not sure how you would keep things fair but you are a very smart and ingenious so I have faith you can. I hope to see it some day.

  • @komitadjie
    @komitadjie11 ай бұрын

    I bought an All American after your last blade sharpener video, I've not regretted it for a moment. That thing is lightning-fast, and super easy to use. I'd recommend it to anyone who needs to sharpen more than just a couple blades a year. You'll be *all* your neighbors' best friend come sharpening time. xD

  • @jimhowes2983

    @jimhowes2983

    11 ай бұрын

    I'm going to convince my neighbour he needs one....

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Good to hear! Thanks for sharing.

  • @Belcher391

    @Belcher391

    11 ай бұрын

    I did the same thing. I used my zero turn for 3 months before I used the All American. I was very impressed how well it sharpened the 3 blades and so quickly. Made a big difference in the cut quality and the grass blades for chopped up more on my mulching blades. Do not regret buying this....

  • @ericb5447

    @ericb5447

    11 ай бұрын

    I also got the All American setup based on the last sharpener video you did. I went to harbor freight with the threaded pins that came with the sharpener and bought the cheapest grinder they sold that a pin threads into. I leave the flap sanding wheel on that grinder and it is dedicated to blades.

  • @SparxI0

    @SparxI0

    11 ай бұрын

    I'm curious, why spend all that money? A new blade is $20 and there's a video on making a nice a jig for a bench grinder to accomplish the same. If I owned a landscaping company I would definitely invest in one. Or maybe if I owned an acreage and had to mow 4+ acres all the time. I just have a normal yard though

  • @Refus777
    @Refus7779 ай бұрын

    This Gentleman is a National Treasure! I’m in my 80’s and have seen many comparisons on every type of tool imaginable and none has even come close to this man’s expertise in assisting us DIYers! Thank you Sir!!

  • @ProjectFarm

    @ProjectFarm

    9 ай бұрын

    Thanks and you are welcome!

  • @Billbobaker
    @Billbobaker11 ай бұрын

    You sir are a national treasure to us do it yourself folks (and even the pros wait for your very professional review...) the reviews you make are priceless to your subscribers. THANK YOU VERY MUCH.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome!

  • @ryanjohnson4433

    @ryanjohnson4433

    11 ай бұрын

    @@ProjectFarm Please, for the love of God, test battery powered fans. It's in the mid 90's here in Georgia. We're all sweating more than we can drink. El Nino is coming, so it's only going to get hotter nationwide. We all just want to which brand has the best battery life, which puts out the most CFM per amp hour, which is the overall best value, how many decibles, etc. I trust you more than I trust the marketing teams at Ryobi, DeWalt, Makita, etc. This product test is relevant and will generate views. El Nino will bring heat and storms, both of which will knock out power. Without power, people don't have air conditioning and will resort to battery fans. We lost power for 9 hours here in Macon, GA on Sunday with the storms. We were all sweltering in the heat. Job sites are borderline unbearable in the sun. It's also relevant for camping, beach vacations, and every other place and time where having a fan would be nice. Heck, they're even nice to have when working on the car or mowing the lawn. This product test will help everyone. Use your science and engineering to point us in the right direction. We need you on this one!

  • @underground538
    @underground53811 ай бұрын

    I find my self inexplicably drawn to these videos despite not having any need for them. I find most interesting the testing methods, showing you dont need absolute measurments and tests to compare products if you give your testing methods some thought. Awesome job as usual!

  • @dingdongmagee

    @dingdongmagee

    11 ай бұрын

    Ditto

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Thanks for watching!

  • @5peciesunkn0wn

    @5peciesunkn0wn

    11 ай бұрын

    Same lol.

  • @kevingray8616

    @kevingray8616

    11 ай бұрын

    Yeah, it's like when I watch Ventrac videos. I'd love to have one, but it would be overkill for my 2 acres.

  • @kennethhicks2113

    @kennethhicks2113

    11 ай бұрын

    I need them ALL! And very thankful... not the fact I need to sharpen 3 blades... again...

  • @BCS_guy
    @BCS_guy11 ай бұрын

    I worked at a lawn mower shop and we used the RGB 712. We left the blade against the grinding wheel as we pushed and pulled it. That made the sharpening process go a lot faster. Petition to test blade balancers! We used a Mag 1000 and loved it!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @alkandavuter

    @alkandavuter

    11 ай бұрын

    RBG

  • @BCS_guy

    @BCS_guy

    11 ай бұрын

    @@alkandavuter Good catch! I totally missed that!

  • @alkandavuter

    @alkandavuter

    11 ай бұрын

    @@BCS_guy even @ProjectFarm missed that detail 😄

  • @alkandavuter

    @alkandavuter

    11 ай бұрын

    @@BCS_guy thanks

  • @RyanMHawkins78
    @RyanMHawkins7811 ай бұрын

    We use an All American Sharpener for our lawn care company on anywhere from 6 to 21 blades per week depending on season and growth conditions. In my experience the 35* setting yields a QOC as good as the 30* while holding the edge longer and surviving impacts with small sticks, etc especially during leaf season. My blades last much longer compared to freehand with a vice and grinder/flappy disc I did before. They balance easier, and QOC is consistent from beginning to end of life on our blades. I also save a TON of time compared to before.

  • @gfbemc0256

    @gfbemc0256

    10 ай бұрын

    Do you use new blades straight out of the box, or do you sharpen new blades?

  • @RyanMHawkins78

    @RyanMHawkins78

    10 ай бұрын

    @@gfbemc0256 I run new blades straight out of the box.

  • @exarkunn69

    @exarkunn69

    10 ай бұрын

    Thanks for the feedback!

  • @felixchaus

    @felixchaus

    10 ай бұрын

    Hi Was just thinking that AAS is the only one of these that can be given to an apprentice to work with or selected operators Rgb might be great for someone who is making swords and knifes Yellow and rgb would be better if the bladerest would have support or quide for the edge to work against

  • @armandosinger

    @armandosinger

    8 ай бұрын

    Thanks for sharing your professional experience. I will try 35 degrees!

  • @michaelkrenzer3296
    @michaelkrenzer329611 ай бұрын

    One thing I love about the cheap stone-on-a-drill unit is if you lift the front of the mower safely, you can do a mid-season touch up on the blades while stillattached to the spindles.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @michaelzdanis3979

    @michaelzdanis3979

    8 ай бұрын

    If you have access to the blades, it takes about 15 seconds to take the off or put them on with a cordless impact wrench. You can then do the job properly!

  • @1marsman1

    @1marsman1

    6 ай бұрын

    How many lb-ft/Nm do I need to remove blades or tensioners or anything else on the deck? THX!@@michaelzdanis3979

  • @Anna-tc6rz

    @Anna-tc6rz

    Ай бұрын

    ​@@michaelzdanis3979 not everyone has a cordless impact wrench or a torque wrench. I'll take mine off once a season but I'm not messing with it more than that lol

  • @nomojo1110
    @nomojo111011 ай бұрын

    The All American is an impressive piece of kit. Guiding the grinder opposed to the blade appears to give the best confidence. I'm not a fan of taking the blade to a wheel that looked rather unforgiving, mainly due to the lack of adjustability. All American for me... and I'm an Aussie ;) Cheers mate 👍

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @davidmaxwell7275

    @davidmaxwell7275

    11 ай бұрын

    Hi Victorian Aussie here, I bought an All American a couple of years ago, has been great very happy with it

  • @_P0tat07_
    @_P0tat07_11 ай бұрын

    That all American would be great for the golf course. We sharpen blades constantly, and a consistent sharpening is key to after cut appearance. Which we usually can’t get with an angle grinder alone. Sometimes we even use a right angle die grinder with a roloc style disc and that doesn’t do any better with keeping the angle consistent.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Great point!

  • @cyclesaviorn2700

    @cyclesaviorn2700

    11 ай бұрын

    Im a big fan of using a belt sander which gives me perfect results, but it takes a notable amount of time compared to that all american

  • @victoryvisiontour
    @victoryvisiontour11 ай бұрын

    I use a hard disc on my All American Sharpener. It is super quick and more accurate than a flap disc. The resulting edge is absolutely beautiful like it was cut on a milling machine.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @TrealTalk187

    @TrealTalk187

    11 ай бұрын

    What grit should you use for the hard disc?

  • @victoryvisiontour

    @victoryvisiontour

    11 ай бұрын

    @alanbarriga77 , I use a fine disc since hard discs remove material very quickly. The actual grit number is not critical. If a coarse disc is all you have, use very light force on it.

  • @marcseclecticstuff9497

    @marcseclecticstuff9497

    16 күн бұрын

    Hey, I've got a mill... I'm an idiot, never gave it a thought. I'm watching this video trying to decide which one of these I should build, was leaning towards the All American design, but wanted to incorporate an adjustable rest for depth to keep it as flat and consistent as possible. Making a jig to hold the blades in the mill and whacking off the excess bits with carbide sounds a lot faster, easier, and more precise than any of these methods... Thanks!

  • @nitrorc4life1
    @nitrorc4life111 ай бұрын

    Been mowing for years, many of them professionally. I clamp blade in vise or to bench and use a right angle grinder and spray plenty of water while grinding, as long as you stay 30°~35° your fine, 30 for normal yards 35° If yard has any twigs, pine cones, acorns etc. and will help with chipping, just my experience. Do not put any pressure, let the tool weight do the work and DO NOT overheat blade with any power tool method. Fast and effective. $285 for the all American...yikes, glad I learned to free hand with right angle grinder.

  • @drewpica7738
    @drewpica773811 ай бұрын

    Fantastic review as always. Would love to see you test boot waterproof coatings, shoe grease, saddle soap etc.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you for the video idea!

  • @rogerstlaurent8704

    @rogerstlaurent8704

    11 ай бұрын

    I am all for it.good idea

  • @MnDakota37

    @MnDakota37

    11 ай бұрын

    I third this, test waterproofing products against Ultra Ever Dry

  • @pedrodepacas-ic1cb

    @pedrodepacas-ic1cb

    11 ай бұрын

    And scotch Guard!

  • @ObservationofLimits

    @ObservationofLimits

    11 ай бұрын

    Saddle soap is soap... Not polish. Not waterproofing.

  • @perniciouspete4986
    @perniciouspete498611 ай бұрын

    As a non-engineer, I'm always fascinated by the ingenious methods you use to test your results.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks!

  • @ChaosRules57

    @ChaosRules57

    11 ай бұрын

    I'm an engineer and I find his testing to be very well done.

  • @Lakecenterlawncare
    @Lakecenterlawncare11 ай бұрын

    As always you do a fantastic job. I’m with you, I have the All American sharpener and love it. I run the Marbain steel blades for my lawn care business. They are tough, and I can literally run a whole season on one set of blades sharpening every 2 weeks with little time sharpening with the All American. Thank you for all you do with your channel, you have helped me immensely!!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome! Thanks for sharing.

  • @electronicsNmore
    @electronicsNmore11 ай бұрын

    Perfect video for me! I'm constantly sharpening lawn mower blades. Thank you for another fantastic testing video!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome!

  • @therealdojj
    @therealdojj11 ай бұрын

    It's that time of the week again where we learn stuff we never knew we needed to know 👍

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you!

  • @Minusroot8
    @Minusroot811 ай бұрын

    I’ve been using a hand file for years and enjoy the time and patience it takes to get a consistent edge. Maintaining your blade so it doesn’t get too dull is also helpful.

  • @mattwaters6987

    @mattwaters6987

    11 ай бұрын

    I totally agree! It's also rewarding too.

  • @RealJeep

    @RealJeep

    11 ай бұрын

    I file three 20" blades with a file. It doesn't take that long and I can knock the burr off the back much easier than with a grinder.

  • @kswis

    @kswis

    11 ай бұрын

    Agreed, it's a self reward and pride that you get by spending time, makes me smile every time I mow

  • @itatane

    @itatane

    11 ай бұрын

    Plus, master putting on an edge with a file, and you can sharpen just about any edge, any where. Very little noise, good results and the only power requirement is calories.

  • @solarmus923

    @solarmus923

    11 ай бұрын

    Frequent maintenance of the blade will absolutely make the process easier and much faster. (you'll get better results on your lawn too). I prefer the file and use a combo of a flat and a round file for mulching blades.

  • @ericmichel3857
    @ericmichel385711 ай бұрын

    I just did mine with a $13 blade sharpening attachment kit for a rotary/Dremel tool and it worked great! Blade was very smooth and razor sharp. That kit also includes attachments for straight, multi blade and chain saws. I found it easier when I put the tool in a vice and held the blade to run it through.

  • @brichardson7884

    @brichardson7884

    11 ай бұрын

    I would've liked to see the Dremel/rotozip/ryobi sharpener in comparison

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the suggestion.

  • @eldee9242

    @eldee9242

    10 ай бұрын

    I've been using the Dremel attachment for a few years now. I really like it. It's a good angle, super easy, super quick to give it a quick touch up every few cuts (I'm obsessive)

  • @fleekwoodmatt4316

    @fleekwoodmatt4316

    10 ай бұрын

    @brichardson7884 Which one did you get specifically? The all american would definitely be my choice out of all the ones he tested, but 300 dollars for what it is seems like a rip-off.

  • @andrewyork8513
    @andrewyork85139 ай бұрын

    Been waiting for this one. Watched the last one when I started cutting grass for a company, and now I’m ready to buy one for myself! Appreciate all the help you’ve given over the years, that you don’t even know you have, or get credit for.

  • @ProjectFarm

    @ProjectFarm

    9 ай бұрын

    Thanks! Thanks for sharing.

  • @terdsie
    @terdsie11 ай бұрын

    When buying sharpeners, it's a good idea to remember that all stones are ablative, so anything that has a "set it and forget it" jig is actually selling you a ton of headache. As the stone wears away, your geometry changes.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @libertarian1637
    @libertarian163711 ай бұрын

    Sharpened a lot of blades over the years and it’s hard to beat a simple nail into a vertical surface for a cheap and accurate blade balancer. Just put it on horizontally and if a side starts to fall it needs material removed. When balanced the blade will stay horizontal. I always liked hand grinding as it was fast and with practice you can get a good edge; though as I’ve gotten older a blade in a vise and an angle grinder does just as good and feels a bit safer. The bench grinder did make it easier though to keep a bucket of water near by to ensure the blade didn’t get too hot; hard to dip a blade when it’s in a vise.

  • @sofjanmustopoh7232

    @sofjanmustopoh7232

    11 ай бұрын

    Nail on the wall is actually not very good as a blade balancer . It work in a pinch for rough balancing . The nail is a lot SMALLER than the lawn mower blade mounting hole . As the result the nail is NOT at the center of the blade . The blade offset location due to the nail . Would mean an small unbalance would Not be detected by the nail in the wall balancer

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @robertheinkel6225

    @robertheinkel6225

    11 ай бұрын

    It has been proven in several videos, a nail is not very accurate, but better than nothing.

  • @libertarian1637

    @libertarian1637

    11 ай бұрын

    @@sofjanmustopoh7232: May not be the “best” way but it works; been using this method for more than 6 decades and haven’t had any major vibrations or even minor ones. You can measure a lot of things good enough with a tape measure, sure you can measure things more accurately with a caliper or micrometer but at a point you get to demolishing returns of accuracy, especially when you’re dealing with something as coarse cutting as a mower blade. That said people can pay for whatever they choose and if you want to go that way go ahead. But a smooth nail at the center of a blade will work well enough and costs nothing as most people will have a nail sitting around.

  • @Jaco3688

    @Jaco3688

    15 күн бұрын

    Glad to hear that someone else uses an angle grinder with blade in the Vice. Are my blades 30 degrees? Probably not. Do they work fine? Yep.

  • @Wags44
    @Wags4411 ай бұрын

    I found your channel last week. I've been binge watching every episode lol. Your channel is AWESOME!! Thank you!! The All American Sharpener is far and away the BEST sharpener I've used yet. I had the original model for straight blades for my Simplicity Broadmoor. I'm now going to upgrade to the All American 5005 so i can do mulching blades. Thank you again for great content!!!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome!

  • @claycox6818
    @claycox681811 ай бұрын

    I'm in the lawn care business. I've been using the All American sharpener for the past 3 years to sharpen the blades on my commercial mowers. I agree with everything you said about the All American. I believe it is one of the best investments you can make to keep good edges on your blades and do so in a short amount of time. As usual, thanks for the great comparison video! Also, I grease my sprockets every week when I sharpen my blades. I use the Red N Tacky after watching your grease review and am extremely pleased with it. I haven't had a sprocket bearing that I use this grease on fail in the last 3 years. I started using both products at basically the same time.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @1979utuber
    @1979utuber11 ай бұрын

    lots of respect for how well you use a file and how simple and effective and cheap it can be. thanks again and keep up the great work!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you very much!

  • @pacman377
    @pacman37711 ай бұрын

    After watching the previous video on blade sharpeners i went to my scrap metal pile and build a sharpener like the all-American and have really been pleased with the easy of use and the consistency it provides.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing!

  • @KHALABEEB

    @KHALABEEB

    11 ай бұрын

    Show off 🤣

  • @jbirdyhome-4050
    @jbirdyhome-40508 ай бұрын

    I really enjoy your videos. Your testing equipment and gauges are impressive. It hurts me inside when sometimes the equipment being tested is destroyed at times during the testing (probably hurts you most since it's your own money used to purchase it!) But the tests are fair and hopefully help lots of people! I learn a lot about things I might never buy, but sometimes these things are good to learn about! You never know when this knowledge might come in handy!

  • @vicscalona6021
    @vicscalona60218 ай бұрын

    Your reviews are spot on ! Thank you.

  • @cpufrost
    @cpufrost11 ай бұрын

    Good comparison as usual! Personally, I've been using an angle grinder with a flap disc on blades in a vise. Like sharpening a knife. Takes getting used to for proper angle but after a while they are perfect. Always check balance too as mentioned! It's much easier to fix an imbalanced blade then change a mandrel out! ;-)

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Thanks for sharing.

  • @robertheinkel6225

    @robertheinkel6225

    11 ай бұрын

    I do the same, using 40 grit flap disk and free handling the angle grinder. Very fast and easy to use.

  • @River_Miles

    @River_Miles

    11 ай бұрын

    There is no better method. Grass, sticks, stumps and rocks don't care if your blade edge is 20-45 Degrees. Resharpening will be needed regardless to get rid of chips. I like to shoot for30-40 degrees as any small rocks or branches hit will create smaller dings and make the blades last longer. You don't even need a vise. Vice grips and a piece of angle iron bolted to any suraface works perfect for sharpening even mulching blades. Flips the blade over to sharpen both edged and a single blade can be sharpened in 2 minutes with a flapper wheel.

  • @whattheschmidt

    @whattheschmidt

    11 ай бұрын

    That's all I have done too and it has worked well. Sharp, balanced, close enough to the right angle....I doubt there's much difference between a 27 degree and 30 degree sharpening...That said I would buy the All American in this video if it cost around $100. No thanks at the actual price though. I do 40 grit if there's a big missing chunk and 120 grit to finish up flap disk.

  • @kkarllwt

    @kkarllwt

    11 ай бұрын

    I use a 60 grit , open cut 4 1/2 inch grinding wheel. I set the blade to be a little lower than elbow height. Do not grind out the nicks. It removes to much blade.

  • @overknight5226
    @overknight522611 ай бұрын

    Weird request but can you test fishing line? There are a few on KZread but none have the quality tests that you will come up with. As always thanks for keeping us entertained!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you for the video idea!

  • @upchurch2222
    @upchurch222211 ай бұрын

    Very timely and valuable! I appreciate your tests, they save me extensive research and money. 👍🏻

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks so much!

  • @simongonsalves5039
    @simongonsalves503915 күн бұрын

    Very complete testing - excellent video!

  • @ProjectFarm

    @ProjectFarm

    15 күн бұрын

    Thank you very much!

  • @tjinla9850
    @tjinla985011 ай бұрын

    I've had the All American for several years now. I like it a lot. It's bolted to a short piece of 2x4 wood block that I can easily clamp down with my Jawhorse vise stand under my car port. Using my battery powered Milwaukee grinder makes the system cordless and portable. I also use the Oregon magnetic balancer (also have the Mag 1000) which I believe is a real bearing saver on my mower decks. Love the whole set up. I hold a blade sharpening "party" a couple of times a year for my sons and a couple of neighbors. 🙂

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @RL-RL
    @RL-RL11 ай бұрын

    I just use my 90degree angle grinder with a 60-80 grit screw on sanding disk. Works great, and is very easy. Another but slower method is my Worksharp knife sharpening system. A little slower, but helps with the multi angle mulching blades. Never had any balancing problems with either method.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @Deadhead.64
    @Deadhead.6411 ай бұрын

    Love to watch your videos, thank you for the thorough, objective testing every single time! Would love to have you compare the different wood filler/putty/repair products for exterior repairs. Thanks!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    You are welcome! Thanks for the suggestion.

  • @jayr526
    @jayr52611 ай бұрын

    My previous comment seems to have disappeared. I have used a four and a half inch angle grinder for years. I normally have a cut off disc on it, but recently I have been using a flap disc.. Apple the starting rope until the piston feels it is at TDC. I flip the mower on its side and remove the mulching blade with a 12 volt Milwaukee impact wrench. This takes less than a minute. Sharpening is done visually and is completed in a couple of minutes. The quality of the sharpening is sufficient for the quality of our lawn. Thank you for another wonderful video.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    You are welcome! Thanks for sharing!

  • @IPwnYouPay
    @IPwnYouPay11 ай бұрын

    Now that it's grilling season, you should do a roundup of the best grill cleaning brushes! After a season I am hesitant to use my metal brush because I fear any of the bristles falling off!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you for sharing!

  • @francoiscaen3182

    @francoiscaen3182

    11 ай бұрын

    I stopped using mine. Too many people ending in the hospital from ingesting metal bristles. The wood paddle is good enough and isn't going to kill me.

  • @HumbertoYi0878

    @HumbertoYi0878

    11 ай бұрын

    The best brush by far is no brush. Use a wood paddle

  • @ezloot4u433

    @ezloot4u433

    11 ай бұрын

    Look into the grill rescue. I love mine

  • @ras8678

    @ras8678

    10 ай бұрын

    @@francoiscaen3182 an alternative method I use for cleaning my metal grill grates is heavy duty aluminum foil. Doesn't take much, gets most of the gunk off and no harmful metal/bristles to worry about. If you have a lot of carbon/food buildup, I'll spray/soak them with vinegar prior then use the foil to remove/clean it. For porcelain coated grates, I use vinegar and baking soda soaking solution cleaning it with a soft scrub pad.

  • @johnwiley8417
    @johnwiley841711 ай бұрын

    Thank you for using a file handle! I actually knew a guy that shoved a file tang into his wrist. Two hour drive off a mountaintop to the closest medical facilities. If he'd nicked his radial artery, we'd have had to use a tourniquet. Even without that complication it wasn't a fun trip.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @Wasur1959
    @Wasur19592 ай бұрын

    Another amazing and informative video, Thank you!

  • @ProjectFarm

    @ProjectFarm

    2 ай бұрын

    Thanks and you are welcome!

  • @ahill209
    @ahill20911 ай бұрын

    I really enjoy your videos! I used to use a hand file, but recently switched to a powered hand grinder. Literally 30 sec per blade on my mulching mower blades. Worth every penny I spent on my cordless hand grinder and the 60 grit sharpening disc. Since I mow 1x/week (almost year-round since I live in FL), I don't need to sharpen that often.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Thanks for the feedback.

  • @Grabatea
    @Grabatea11 ай бұрын

    Just got my first ride on lawn mower and this video will def come in handy later. As always thank you for the amazing videos!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Glad to help!

  • @mattsmith6828
    @mattsmith682811 ай бұрын

    I actually bought the All American about a year ago and you're right. It's fast! lol It also does a way better job than I could do by hand. Not much more I could ask for.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @Dwigt_Rortugal
    @Dwigt_Rortugal11 ай бұрын

    Your tests are thorough and straight to the point. Thanks for all the time and effort you put into them. I've got a lot of light fixtures with transparent glass or exposed bulbs, and I have yet to find an LED "filament" bulb that lasts. I'd love it if you'd put some to the test, especially in varying temperatures to simulate changing seasons.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome! Thanks for the suggestion.

  • @2020Tundra
    @2020Tundra11 ай бұрын

    I bought the All-American model that is preset to 30 degrees and it works great. And I bought it after watching your previous review that tested the same model. Thanks for all the awesome and valuable videos you put out for us!!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome! Thanks for sharing.

  • @billpanop383
    @billpanop38311 ай бұрын

    Just had my blades sharpened, cost $8 a bade. My Honda mower has 2 blades so it cost me $16. Always thought about getting a sharpener and this video will help with that decision. As always, AWESOME work. Thank you!

  • @Francois_Dupont

    @Francois_Dupont

    11 ай бұрын

    you could buy yourself a pair of glove, muff and glasses and sharpen most of any "rought" tools with a hand grinder worth 20$ coupled with a flap disk or asphalt stone.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you very much!

  • @volvo09

    @volvo09

    11 ай бұрын

    ​@@Francois_Dupontyeah, it's very easy to freehand with an angle grinder.

  • @KreemieNewgatt

    @KreemieNewgatt

    11 ай бұрын

    If you shop around you can find a pair of genuine Honda blades for under $20. I never bother sharpening mine, but just replace them instead. Same thing with brake rotors, repl rather than turn on a lathe.

  • @LemonySnicket-EUC

    @LemonySnicket-EUC

    11 ай бұрын

    ​@@KreemieNewgattquality of cut is part of the equation. Maybe you don't care about that personally or maybe you only mow the lawn only to get it done but as a professional with over 47 years in the field I can tell you that staying sharp is paramount if a customer is involved. We cut our weedless lawns 30 times a year.

  • @randysavage8963
    @randysavage896311 ай бұрын

    Always fantastic tests . Thank you for making my Sunday better as usual Todd !

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    My pleasure! Thanks for the positive comment! That's what keep me going!

  • @rascle911
    @rascle91111 ай бұрын

    I use your tests to help decide, and it is the truest most honest reviews ever. Your the Clark Howard of reviews neither accept sponsors or is there any bios. Just what ever it is. What got me hooked was your battery reviews between cheapest like Amazon to the top brands. You have not ever disappointed! Lithium battery’s are starting to be recommended like alkaline batteries were in the past. Maybe someday you would consider doing a test on a range of them. Thank you for all the trouble you go through for us! So much detail!!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome! Thanks for the suggestion.

  • @Michaelxl14
    @Michaelxl1411 ай бұрын

    Thank you for all the work you do!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    My pleasure!

  • @angrydalek
    @angrydalek11 ай бұрын

    Waits patently for the Sunday review. I commented this on your last video yesterday, but I’ll put it here as well. I was surprised to discover you’d not compared various corded/cordless hedge trimmers. I think this could round out your outdoor equipment section nicely.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    My biggest concern is that there won't be adquate interest in the topic. I'd really like to review them.

  • @gus473

    @gus473

    11 ай бұрын

    ​@@ProjectFarm😄 I think your audience is now so solid you could test ballpoint pens and still draw a crowd! 😎✌️

  • @drteknical6571

    @drteknical6571

    11 ай бұрын

    @@gus473 Agreed!

  • @davidcampbell2845
    @davidcampbell284511 ай бұрын

    Fantastic tests and very practical - thanks!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome!

  • @The.Home.Cinema.Engineer
    @The.Home.Cinema.EngineerАй бұрын

    great and informative video! thanks!

  • @ProjectFarm

    @ProjectFarm

    Ай бұрын

    Thanks and you are welcome!

  • @timgebers2858
    @timgebers285811 ай бұрын

    I use a 60 grit flap disc freehand with the blade clamped in a vice as long as I don't force it it's worked great.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Great feedback! Thanks!

  • @Michael_Miller508
    @Michael_Miller50811 ай бұрын

    I’m more than happy using my $9 blade sharpener. I think $1200 for blade sharpening my $200 lawnmower is just a lil too much 😂 I’ll check out the Arnold sharpener tho .

  • @volvo09

    @volvo09

    11 ай бұрын

    I would consider the 1200 one a professional level tool, like if you ran a shop... It gives a perfect "flat" result which i'd expect if I paid to have a blade sharpened, vs doing it myself with a grinder.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @Hammerback972

    @Hammerback972

    11 ай бұрын

    Wish my mower was worth 200 bucks. I have a nine dollar mower with homemade blades 😂

  • @volvo09

    @volvo09

    11 ай бұрын

    @@Hammerback972 haha, my rider was free, and my push mower was free. Only the finest will do.

  • @Michael-RI
    @Michael-RI3 ай бұрын

    Good test. I used my new 4" belt sander from Harbor Freight to sharpen my blades and it worked very well and did not take long at all. A bit difficult to use on mulching blades but is doable. I did sharpen two standard blades which was easier and did a good job.

  • @sevfregoso556
    @sevfregoso55611 ай бұрын

    very well done. I am glad you attempted to sharpen a mulching blade. This video has helped me a lot.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Glad to hear!

  • @kbjerke
    @kbjerke11 ай бұрын

    That was amazing! And I am *SUCH* a butcher when it comes to sharpening the blades on my Deere LA115. I "free-hand" it with an angle grinder and a flapper disc. But in my defense, the blades *are* mulching blades. Thanks for the eye-opening review!! 👍

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome!

  • @johnmckee7937

    @johnmckee7937

    11 ай бұрын

    You might try dremel tool with grinding wheel and finish with file.

  • @kbjerke

    @kbjerke

    11 ай бұрын

    @@johnmckee7937 I use what I have... LOL And it works fine, it's just not the prettiest job. But being out of sight under the mower deck, nobody knows but me! And the lawn looks fine.

  • @KenzertYT

    @KenzertYT

    11 ай бұрын

    @@johnmckee7937 No way lol.

  • @cgtbrad

    @cgtbrad

    11 ай бұрын

    Same here. Free hand with an angle grinder. When I'm really lazy I do it on the mower.

  • @rickdff62
    @rickdff6211 ай бұрын

    I recently bought that Arnold kit just for the blade balancer but decided to try it on an old blade I had laying around. I used an old Craftsman corded drill rated at 3000 rpms and it worked much better than in a cordless. Still wasn't great but it was serviceable.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @autoguygl
    @autoguygl10 ай бұрын

    I really enjoyed your video as well as your insights on each sharpener. Thank-you.

  • @ProjectFarm

    @ProjectFarm

    10 ай бұрын

    Thanks and you are welcome!

  • @deyyoung42
    @deyyoung4211 ай бұрын

    I use a mill file on my mulching blades (mounted in a vice); 3-4 passes and done. I sharpen them weekly. Takes longer remove and reinstall the blades than it does to sharpen them. Your blades were way more dull than they should ever get, which is why it took so long - your grass will look better, too. No special setup, no dedicated space, and no expensive jig needed.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @JonesNate
    @JonesNate11 ай бұрын

    I think by the time you get the blades off and on the mower, the sharpening time isn't quite so important. None of the motorized equipment seemed to really take a long time. Personally, I tend to try to balance "cost vs benefit" when buying stuff. Based on that, I'm probably going to look closer at the Yellow Hornet, since I can likely stick a Pittsburgh/Chicago Electric (Harbor Freight) grinder in it and still get decent enough results. I don't use a bagger/mulcher, so I don't need to worry about the curved blades. By the way, did any of the sharpeners have an easy way to screw/bolt them to a workbench?

  • @spacecase13
    @spacecase1311 ай бұрын

    I don't even use these tools or do lawn mowing and I found this video utterly fascinating. Excellent demonstrations!!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks so much!

  • @NeringIndustries
    @NeringIndustries11 ай бұрын

    5" Makita grinder with a 60 or 80 grit flap wheel. Just free hand it, works perfect for me. I should get one of those balancers though just to be sure, although I've never felt an imbalance yet.

  • @gus473

    @gus473

    11 ай бұрын

    They were hard to find for a while! When I finally did, it was about $7. Definitely makes a difference on older or "abused" blades.... 😎✌️

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Great feedback! Thank you

  • @brentftaylor
    @brentftaylor11 ай бұрын

    I have the RGB 712 and it works great. I like the fact it’s dedicated to only blade sharpening and I don’t need any other tools.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Nice sharpener!

  • @Chris_Cable
    @Chris_Cable11 ай бұрын

    Thank you for your videos, please keep up the great work! Idea for testing, are impact torque sticks accurate? If so, which brand is more durable and accurate.

  • @RCGshakenbake
    @RCGshakenbake11 ай бұрын

    Ive always just used an angle grinder to clean up the blemishes and finished it off with a hand file. Never had a complaint.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @doesntmatter9833
    @doesntmatter983311 ай бұрын

    Highlight of my week! Only creator I have adverts allowed for

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you very much! It helps sustain the channel

  • @Todd66
    @Todd6611 ай бұрын

    This video like many others can double as a “how to” video. Some valid points, tips and tricks. The learning curve statement should be in everyone’s mind when they buy a new tool so as to temper one’s expectations. It takes a bit of time to get proficient at a skill, and making a quality cutting edge on any tool is without a doubt a skill. The way he used that file…100% skill. Really good job on this video, like every video. Awesome channel

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome!

  • @WeatherNut27
    @WeatherNut279 ай бұрын

    Another amazing video! Thank you. I use a bench grinder and you said it, it doesnt leave a consistent angle. I may switch to the wheel or hand grinder

  • @REKKnives
    @REKKnives11 ай бұрын

    Thanks for the video! Would love to see one comparing different brands of mower blades to see which holds up the best!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the suggestion.

  • @michaellyons742
    @michaellyons74211 ай бұрын

    Have had the All-American sharpener for two sezsons so far and it works very well. Couldn't be easier to use. Very consistent repeatable results. Very happy with the decision to purchase this american made piece of equipment.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @mason6300
    @mason630011 ай бұрын

    When it comes to grind time I think its important to also consider setup time. Some of the grinders were "fast" but took a good few minutes to get set up so overall not as quick as the ready to go ones.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @muffinbutton1484

    @muffinbutton1484

    10 ай бұрын

    Whoa whoa whoa sir... there can be only one of us

  • @Odin31b
    @Odin31b2 ай бұрын

    Seriously Dude, anytime I need to research a tool or process you have a video. Truly amazing channel! The "All American" seemed the best to me but also just made a good grinding technique dumb proof by holding the grinder for you at the correct angle. Since I grew up with having to do it with a file, I think I'll try the grinder free hand first. The tip about the correct wheel to get is also a huge help. Thanks again!

  • @ProjectFarm

    @ProjectFarm

    2 ай бұрын

    Thanks!

  • @michaelelder6716
    @michaelelder67166 ай бұрын

    can't stop watching it, im addicted to it

  • @TheMaroney
    @TheMaroney11 ай бұрын

    Great video. I think I would use a vise and my grinder with flap disks. As long as you can get the angle right it should be fine.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Thanks for the feedback.

  • @joshmertaw6031
    @joshmertaw603111 ай бұрын

    I cut grass every day as a lawncare worker. I really enjoyed this video. I think it would have been neat to see the BESS test on each blade before and after sharpening, and maybe having the blade run through water for 10 minutes or something like that. It'll dull the blades faster than grass, so it would work for video time purposes, to simulate the amount of wear each products blade. Which product do you think you would recommend for commercial use?

  • @5peciesunkn0wn

    @5peciesunkn0wn

    11 ай бұрын

    BESS test?

  • @Thelongmanable

    @Thelongmanable

    11 ай бұрын

    *_I did Lawn care for years and a new blade 15 dollars or less depending on where you go. I have zero time for this silliness, and any real wear the blade hasn't got enough meat to sharpen them or to thin to even think.of doing this._*

  • @SparxI0

    @SparxI0

    11 ай бұрын

    +1 for the BESS test, not sure why he didn't do that because he does that for all videos with knives and knife sharpeners in them

  • @nobodynoone2500

    @nobodynoone2500

    11 ай бұрын

    @@Thelongmanable It's almost as if you can throw your old blades into a pile and refurb them all in an hour during downtime, yours or the newhires. No point throwing away good blades.

  • @LemonySnicket-EUC

    @LemonySnicket-EUC

    11 ай бұрын

    ​@@Thelongmanable47 years plus and still going. Sharpening blades on a regular basis is what most professionals do. We have stacks of blades that we do at a time.

  • @FlintStryker
    @FlintStryker11 ай бұрын

    I have a Work Sharp Knife &. Tool sharpener, Ken Onion edition, with all the attachments and extra belts. I have maybe $300 in it all in. I use it to sharpen everything in the house. With the mower blade attachment I can sharpen both sides of my mulching blades to scary sharp in about 15 minutes. It often takes me longer to get the blades off my lawn tractor deck than it does to sharpen the blades. Highly recommended and versatile tool. I love your channel!!!!!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Thanks for sharing.

  • @rugerfarming5387
    @rugerfarming538711 ай бұрын

    i bought a All American sharpen. The last time you test them. And i love it. Thanks.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @theezeelife292
    @theezeelife29211 ай бұрын

    Great video. Will for sure investing in the All American. Would really like to see you test different brands if files. Nichols used to be the way to go but I see a lot of people say how it just isn't what it used to be.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Thanks for the suggestion.

  • @dalemyers3945
    @dalemyers394511 ай бұрын

    I bought a copy of the all American on Amazon for about 60.00 and it works perfectly, since I don’t have many blades to sharpen and not mowing commercially I couldn’t justify the 285.00 price tag.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the feedback.

  • @JDSikkema

    @JDSikkema

    11 ай бұрын

    Which one was it? Looks like there are quite a few clones.

  • @dalemyers3945

    @dalemyers3945

    11 ай бұрын

    @@JDSikkema They don’t sell it anymore under the name I have but there are a lot of them listed under different names but it’s the same thing. I wanted one with a metal tightening handle not the plastic. I mounted it on a board that I clamp in my jawhorse and move it outside and it works great. Make sure you clean the edges of the blade so it clamps properly.

  • @russelljohnson6243
    @russelljohnson62439 ай бұрын

    Another superb video my friend! I feel like your entire subscriber base owes you a debt of gratitude, you keep us professional!

  • @ProjectFarm

    @ProjectFarm

    9 ай бұрын

    Thanks so much!

  • @jayr526
    @jayr52611 ай бұрын

    As always this was a 0:16 great job. I love your videos. I have been sharpening a long more blades for a long time. I use a cordless 4 and 1/2-in grinder. Most of the time there is a cutoff disc on it.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you very much! Thanks for sharing.

  • @jameskenney5623
    @jameskenney562311 ай бұрын

    Really wanted to see the $12 Dremel adapter. I've used it hundreds of times over the years on customer machines.

  • @gus473

    @gus473

    11 ай бұрын

    Also would be good interesting to test Dremel's chainsaw sharpening bits!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Sorry I missed it. Added to my list for the future

  • @Friedbrain11
    @Friedbrain1111 ай бұрын

    Whether I need or use a product in your vids doesn't matter. I watch them to learn. You have real-world testing that seems to be missing otherwise and it is wonderful to see your testing. The All-American is my favorite.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks!

  • @MrMrWrench
    @MrMrWrench11 ай бұрын

    Another excellent video. Thanks for your time.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome!

  • @kolt4d559
    @kolt4d55911 ай бұрын

    Another fantastic video Todd! Personally what causes damage to the 2 blades I use is sticks and branches that are run over. That considered a nice file is the go to option. However if someone needs to maintain a few dozen blades on a golf course, sod farm, or local public works the more expensive sharpeners can be worth the investment. As a second comment I have a few video suggestions. Comparisons for the following categories: pruning shears, shrub shears, lopping shears, and maybe some handheld saws. All are items that can be utilized in maintaining ornamental plants, shrubs, and trees.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Thanks for the suggestions.

  • @modquad18
    @modquad1811 ай бұрын

    All American has been terrific for me. I can C-clamp it to my loader bucket and sharpen outside to avoid any mess in my shop. Also folds up into a very small mass for storage.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for sharing.

  • @clarksargeant8446

    @clarksargeant8446

    11 ай бұрын

    Thanks for this clever suggestion! I hate getting metal bits all over the garage, and even with a mask, they tend to get in the airway.

  • @bvb8769
    @bvb876911 ай бұрын

    Thanks for all of the great tests and reviews. I have a suggestion for you to test. Fireproof/waterproof document bags. There's no standard for rating them like safes. So, testing an assortment may show some interesting results. Keep up the good work and best wishes.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    You are welcome! Thanks for the suggestion.

  • @Anna-tc6rz
    @Anna-tc6rzАй бұрын

    Thanks again for a great video! I can't use a hand file, and probably shouldn't use power tools but the arnold looks like it will work well enough and be safe enough for me to use

  • @ProjectFarm

    @ProjectFarm

    Ай бұрын

    Thanks for sharing.

  • @Enonymouse_
    @Enonymouse_3 күн бұрын

    I typically sharpen with handheld pneumatic angle grinder and disposable disc. It works well enough for most blade maintenance.

  • @CaptainBoobles
    @CaptainBoobles11 ай бұрын

    Do you end up keeping many of the products you test, or do you sell them on (atleast the ones that haven't been destroyed during testing)? If so, what's the most expensive one you've kept hold of? Do companies ever follow up with you to improve their products or ask you to test prototypes? Would love to see a FAQ video!

  • @tbelding

    @tbelding

    11 ай бұрын

    In a past video (or two), he's mentioned that he donates a lot of them on. At least, those that survive.

  • @MoonKeyDLaughy
    @MoonKeyDLaughy11 ай бұрын

    Dash cams next 😎

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you for the video idea!

  • @JustinCuster
    @JustinCuster11 ай бұрын

    Thank you. Great job sir.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks and you are welcome!

  • @utuberatlanta
    @utuberatlanta6 ай бұрын

    I alway look to see if hou have done a review on a subject i am interested in. So many KZreadrs go on and on about everything under the sun and don't get to the point like you do. All the information one needs to make a informed decision is to watch your videos. Thanks for what you do !

  • @ProjectFarm

    @ProjectFarm

    6 ай бұрын

    You are welcome!

  • @Birb_of_Judge
    @Birb_of_Judge11 ай бұрын

    I'm going to be honest, I'd either use a fine file or a belt grinder Btw I'd love too see a review for different brands of 2x48/72 grinding belts

  • @goosenotmaverick1156

    @goosenotmaverick1156

    11 ай бұрын

    The way I beat em up, I hit em with an angle grinder without removing them. I sharpen at least monthly and usually replace yearly lol The belt grinder is an approach I never considered, I'll have to try removing and using that for sure for the blades on my brushhog. May be able to fit it up there without removing too haha

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thank you for the video idea!

  • @WisconsinEric

    @WisconsinEric

    11 ай бұрын

    I'm a flat file guy, but I got to admit that the guys building custom $300+ knives usually sharpen them on a belt sander. My Father uses a 2" belt sander for his riding mowers blades and it works well.

  • @goosenotmaverick1156

    @goosenotmaverick1156

    11 ай бұрын

    @@WisconsinEric my neighbor has a sweet Ameribrade brand belt sander for knives and such. I've used it for a couple other minor things and boy is that thing SWEET

  • @Birb_of_Judge

    @Birb_of_Judge

    11 ай бұрын

    @@goosenotmaverick1156 god, i want one of those so badly. I built one myself and it works, but it ain't great

  • @stuartjohns2779
    @stuartjohns277911 ай бұрын

    One test you didn't do is to see how long the edge lasts. Abrasive wheels soften the blades so the blunten quickly. For almost every blade a file is the slowest method of sharpening but holds its edge way longer. This also applies to cold chisels and centre punches

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks for the constructive feedback.

  • @andrewblahut6213
    @andrewblahut621311 ай бұрын

    I have that gringing wheel with the nylon. it came in a tool box I inherited. I had NO idea what it was and now I know. THANK YOU!

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    You are welcome!

  • @user-er9uu1hj7s
    @user-er9uu1hj7s11 ай бұрын

    It’s july 1 and july 4 is right around the corner. sitting around the fire got me thinking of what we all spent on fire works to celebrate Canada day and they weren’t that impressive. I’m curious to see what are the better brands for fireworks and what gets you the best bang for your buck. Love the videos and the honesty reviews. can’t wait for the next video

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks!

  • @joeyw690
    @joeyw69011 ай бұрын

    Does no one realize how fast blades dull? You’re not trying to get a razor knife edge. Half an acre will obliterate that edge

  • @g.alistar7798

    @g.alistar7798

    Ай бұрын

    And even faster if you hit a mole,or gopher mound!

  • @Callofdutyjoey

    @Callofdutyjoey

    Ай бұрын

    No

  • @Callofdutyjoey

    @Callofdutyjoey

    Ай бұрын

    I keep blades on and sharp for about three acres worth of grass.

  • @Callofdutyjoey

    @Callofdutyjoey

    Ай бұрын

    And I sharpen them with an angle grinder

  • @love101a3

    @love101a3

    Ай бұрын

    Ask the the rainfall😊

  • @alexisschecter6554
    @alexisschecter655411 ай бұрын

    As usual another great review. I just said to myself the other day I need to sharpen my mower blades. Now I know which one to purchase. Thank you

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Thanks! Glad to hear!

  • @Adoringbigfoot
    @Adoringbigfoot11 ай бұрын

    About 12 hours ago I found myself in Home Depot trying to figure out what I should buy to sharpen my lawn mower blade, I quickly gave up not sure what was best and decided my blade isn't THAT dull, fast forward to this morning and here we have the answer I needed.

  • @ProjectFarm

    @ProjectFarm

    11 ай бұрын

    Great to hear!

Келесі