BEST Honda Talon Upper/Lower A Arms upgrade from CA Tech! How to install
Жүктеу.....
Пікірлер: 27
@DonziGT2302 жыл бұрын
The two downsides I see to super HD arms is unsprung mass and the increased ability to do frame damage. Hitting or loading a stock arm really hard might bend it and not transfer enough energy to the frame to damage it. Weaker arms can act kinda like a fuse protecting the frame, just something to consider
@michaeldibble52086 ай бұрын
Hey make some more videos! All your videos are great and very informative!
@gravesru
6 ай бұрын
Will do and thank you!!
@CATechnologiesUSA2 жыл бұрын
Nice video! Love the talon X to R conversion 👍👍 Keep it up!
@gravesru
2 жыл бұрын
Thank you for making awesome products!!
@davidsawmandave873111 күн бұрын
David here.Thanks for this tool was pretty amason.I'm going by Harbor freight today and pick one up. Wondering if it'll work on the Steering ball joint also. Subbed
@gravesru
11 күн бұрын
@@davidsawmandave8731 I’ve never needed any tools for the tie rods, just leave the nut on loose and give it a couple of taps
@davidsawmandave8731
11 күн бұрын
@gravesru mine for some reason is tight , I even tapped on the sides and directly on the bolt on bottom with nut flush with a brass hammer
@annaovchinnikoff8280 Жыл бұрын
Hey there new to riding have a Quick question I'm running JR turbo on our 21 Honda 4-seat live valve and wanting to know if you have any info on the BOV how to get it louder (more air sound when releasing off the gas pedal) all my other belt machines had in the past it so its just fitting to do the same with this machine (that Fast N furious sound)...lol. Not much info out there on any mods for JR kit especially on the BOV. I was told that JR BOV releases back inside and not into the atmosphere and I would need to change this up not sure where to start or who to call here in Oregon that does mods on JR kits. Thanks
@gravesru
Жыл бұрын
Reach out to Bill at Committed Powersports in Tillamook!
@REDNECKCHANNEL2 жыл бұрын
NICE!!
@perezm7142 жыл бұрын
If it doesn't give you a bloody knuckle, it wasn't worth working on. Nice job.
@gravesru
2 жыл бұрын
Exactly!!
@timothyborgmann94292 жыл бұрын
Great video as always! I also have the 14" 6+1 wheels up front. Thinking about installing just the lower a arms. Will the lower a arms work with the 6+1's? Thx in advance.
@gravesru
2 жыл бұрын
Yes, I believe so!
@timothyborgmann9429
2 жыл бұрын
So I decided on the 15" SB4 to give me the room for upper a arms. You are doing a great service to all of us Talon owners!
@gravesru
2 жыл бұрын
@@timothyborgmann9429 thank you. I had to learn the hard way
@rogereastwood76022 жыл бұрын
So how is you machine doing now after the performance upgrades, just curious as to why you never broke a piston on your original r machine that had 10000 plus hrs. T
@gravesru
2 жыл бұрын
The engine build was a disaster. I’m back to the jackson kit.
@videosatrandomplease9933
2 жыл бұрын
@@gravesru what happened? Are you talking about the dr.powersports build??
@gravesru
2 жыл бұрын
@@videosatrandomplease9933 I’ll make a video explain how it’s been a total disaster with the engine build
@mikewagers86104 ай бұрын
where did you buy your ball joints?
@gravesru
4 ай бұрын
Honda dealer. They’re oem
@aw9680 Жыл бұрын
So, do the stock 6+1 15" wheels clear?
@gravesru
Жыл бұрын
Yes!!
@aw96802 жыл бұрын
Are they working on rear arms?
@gravesru
2 жыл бұрын
They have a complete suspension kit. Rear radius rods
Пікірлер: 27
The two downsides I see to super HD arms is unsprung mass and the increased ability to do frame damage. Hitting or loading a stock arm really hard might bend it and not transfer enough energy to the frame to damage it. Weaker arms can act kinda like a fuse protecting the frame, just something to consider
Hey make some more videos! All your videos are great and very informative!
@gravesru
6 ай бұрын
Will do and thank you!!
Nice video! Love the talon X to R conversion 👍👍 Keep it up!
@gravesru
2 жыл бұрын
Thank you for making awesome products!!
David here.Thanks for this tool was pretty amason.I'm going by Harbor freight today and pick one up. Wondering if it'll work on the Steering ball joint also. Subbed
@gravesru
11 күн бұрын
@@davidsawmandave8731 I’ve never needed any tools for the tie rods, just leave the nut on loose and give it a couple of taps
@davidsawmandave8731
11 күн бұрын
@gravesru mine for some reason is tight , I even tapped on the sides and directly on the bolt on bottom with nut flush with a brass hammer
Hey there new to riding have a Quick question I'm running JR turbo on our 21 Honda 4-seat live valve and wanting to know if you have any info on the BOV how to get it louder (more air sound when releasing off the gas pedal) all my other belt machines had in the past it so its just fitting to do the same with this machine (that Fast N furious sound)...lol. Not much info out there on any mods for JR kit especially on the BOV. I was told that JR BOV releases back inside and not into the atmosphere and I would need to change this up not sure where to start or who to call here in Oregon that does mods on JR kits. Thanks
@gravesru
Жыл бұрын
Reach out to Bill at Committed Powersports in Tillamook!
NICE!!
If it doesn't give you a bloody knuckle, it wasn't worth working on. Nice job.
@gravesru
2 жыл бұрын
Exactly!!
Great video as always! I also have the 14" 6+1 wheels up front. Thinking about installing just the lower a arms. Will the lower a arms work with the 6+1's? Thx in advance.
@gravesru
2 жыл бұрын
Yes, I believe so!
@timothyborgmann9429
2 жыл бұрын
So I decided on the 15" SB4 to give me the room for upper a arms. You are doing a great service to all of us Talon owners!
@gravesru
2 жыл бұрын
@@timothyborgmann9429 thank you. I had to learn the hard way
So how is you machine doing now after the performance upgrades, just curious as to why you never broke a piston on your original r machine that had 10000 plus hrs. T
@gravesru
2 жыл бұрын
The engine build was a disaster. I’m back to the jackson kit.
@videosatrandomplease9933
2 жыл бұрын
@@gravesru what happened? Are you talking about the dr.powersports build??
@gravesru
2 жыл бұрын
@@videosatrandomplease9933 I’ll make a video explain how it’s been a total disaster with the engine build
where did you buy your ball joints?
@gravesru
4 ай бұрын
Honda dealer. They’re oem
So, do the stock 6+1 15" wheels clear?
@gravesru
Жыл бұрын
Yes!!
Are they working on rear arms?
@gravesru
2 жыл бұрын
They have a complete suspension kit. Rear radius rods