I honestly would like to see more videos like this where it's someone who is just learning. I love watching the professionals, but I can learn just as much from other beginners.

I'm gonna subscribe to your channel becuz I appreciate your honesty and willing to learn. As far as your combination of 3D 1 and Euro fiber, yes, it's a great combination. Used it many times. U would have been fine to make several more passes as 3D has a long work time. What u do need is more pads. For example, I have a Mazda6 GT, basically the same size as the Honda you're doing. Last week I decided to do my car instead of everyone else's cars. I used 10 pads on it. I didn't use 3D tho. Change your pads, you'll get a clean cut. Work the 3D more. It really is an excellent combination. Always remember that no 2 vehicles are the same. Pay attention to what you're doing always. I learned how to wet sand and compound working in a body shop with a rotary 30yrs ago. Don't compare yourself to others. You WILL make mistakes, just don't make them SEVERE mistakes and u will learn what works for u. Good luck with your coating

Remember, paint should only be cut once. Even learn to use a rotary on the lowest setting with medium wool like a LC Purple with 3D One. Benefit of 3D One is even if its a 2 step, you dont wipe off after the cutting step. You just use a different polishing pad and few drops polish over it. You only wipe once finished polishing. 3D is aimed towards body shops so aiming to get the work done quicker. No issue with the waterless, just maybe try a Clay mitt/cloth or sponge to clean up the paint better. Well done.

Really impressive demonstration, I was interested in buying some 3d one , after watching I am going to get a bottle and pair up with the Uro fibre pad , keep up the good work 🇬🇧

Take a shot every times he says "Umm" you would be drunk in the first 2 minutes. Lol, no offense.

I've used that combo as a starting point for paint corrections for three years now.

I just did my first using Turtle Wax black polish and it turned out amazing. Now I ordered this for doing a friends car!

I learned this from Brian at Apex Detail. It works!!! Liked and Subscribed.

As a beginner or rookie, 3d One with the Uro 5050 pad is a good starting point. Once you get past that you realize there is nothing like compound and a wool or microfiber pad then finishing it off with polish.

That’s all of the exact same stuff I use except for the pads. I was using the rupes yellow foam pad. I’m gonna order one of those uro-fiber pads today and try that!

a good practice is to prime the pad first.

wow, never seen anyone clean a bonnet like that before.

Best thing ever ceramic coating that’s where I make all my money I don’t do detailing anymore👍🏼👍🏼👍🏼

You are well on your way to be a great detailer, always follow your intuition and gut feelings, you will be on the correct path always!!!!!

I recently ran urofiber 50/50 + 3d one followed up with carpro gloss pad + essence on my whole car with a griots G9 + 5" plate, then coated with 2x cquartz uk 3.0 coats, and man did it come out great on my white vehicle. I'm just an amateur guy in my garage who saved $1000+ compared to taking it to a shop. So easy to clean now, water just slides off it

Brother you still have a lot to learn and whole lot to “unlearn”😂. Keep at it. Stop listening to every person on KZread. You’re not ready to even attempt a full blown ceramic or Graphene product yet. You’ll never go wrong using 3D One and a UroFiber pad on most clearcoats. However not all clearcoats will react as well to that combo. Best advice is practice different pads, polishes. Plus you’re not likely to get an everyday driven car to a show car flawless finish. Good luck and keep going.

I enjoyed your video. Keep at it.👍

As far as your attempts to keep moving forward and overcoming the learning curve, you will be quite proficient the more you do your own detailing. I did not see you clay bar, nor use a contaminant remover, like “Iron x”. The scratches left behind could be residual gritty crap. Great job! Keep charging forward.

you don't need a heaver cut, da's are just junk, with my rotary I use 1 med rupes cutting pad with 3d-one and it finishes down to a perfect deep shine on every car. if the clear is really hard it takes just a tad bit longer but always finishes down glossy as hell with no holograms.

I am curious to know if you happened to take a clear coat reading before or after the correction? I appreciate the honesty in you video. We all are learning, thank you for sharing this video.