I just used meguiars ultimate this weekend by hand and got great great results. I'm going to buy a polisher for Father's day

@Evadingmoto

10 ай бұрын

Get a polisher?

@benh580

10 ай бұрын

@@Evadingmoto yes sir. I bought a maxshine machine. Only used it a few times but it got my car looking great. And then I protected it. Still looks great.

I just picked up the old HF polisher with a 5” and 3” backing plates and the Chemical Guys Hexlogic pads. I’m new to paint correction and just did 2 of our cars with Maguire’s ultimate polish and the orange hexlogic pad. Actually got a ton of light scratches/swirls and 95% of the water spots on my wife’s car.

I love Meguirs Ultimate Compound , it works flawlessly and it is easily available just at my local retail even though I am a weekend warrior any vehicle I do comes out fantastic......

I just used the Meguiars Ultimate after exclusively using Menzerna and the result was brilliant and saved me a lot of time!

3d one and ACA 500 are my main 2 these days. 3d one works great in direct sunlight as well.

When you said you’ve seen the Meguiars “do some serious damage” against another product, I instantly thought it ruined a paint job. Probably not the best choice of words to describe a detailing product.

@autodetailingpodcast

5 жыл бұрын

I’ll try to pick my words more carefully next time

@danlc95

5 жыл бұрын

@@autodetailingpodcast - I had no problem discerning the word in the context you were using. Do your thing JB.

@B1GMACNFR1ES

4 жыл бұрын

His name say it all

@PNW_Sportbike_Life

4 жыл бұрын

Dick Fitzinya same

@originalalienone

3 жыл бұрын

@@autodetailingpodcast I gotta be honest, I thought the same thing, but within a couple of minutes of that I knew what you meant.

Just picked up UC and its counterpart UP. Awesome results on a black car for a shadetree guy. 👍

I used UC by hand to prepare my new car for cquartz. I could erase some scratches with just a wax pad and my arm. I was amazed by the product and recommended it to all my friends.

I have used porter cable for over ten years as well. Works fine!

I use both. I’d say that if you get familiar with both, you really want to always have both available at your disposal. 3D to me is a better polish, and UC is a better compound IF you time the working time properly. If you get that right with a green pad, it works wonders. That said, if there’s one to take to the grave, it’s 3D. So flexible, lasts forever, no dust, and beyond consistent. If you team 3D with a wool or microfiber pad, you’ll be amazed at what it can tackle. Another product I really like for super-tough jobs is Xtreme Solutions LVR 321 Knockout. Yes, it will dust some, but it goes after 1,000-grit problems without hesitation. Great to have handy when you need to cut fast.

@100flite

Жыл бұрын

Tried both. I'll get the 3D One anytime of the day!

Nice job, Jimbo. Glad you address the negative comments, but don't waste a bunch of time on the negative stuff. Too much good information coming out of your channel to worry about that crap. Keep it up.

@autodetailingpodcast

5 жыл бұрын

Thanks man!

Just bought ultimate compound yesterday. Very suprised with the results. An excellent product at a respectable price

I love your garage set up, I'd like similar one day. The only thing I'd say is maybe run the camera in closer at the end

Very good demo ! Some folks have no respect or faith at all on some products unless they are high end or really overpriced because of a fancy name,but some of these retail products not only hold their own to some of these fancy name ones but have been long main stays in the market which kind of tells us that they do their intended purpose.

@autodetailingpodcast

5 жыл бұрын

💯

Jimbo you need to make a video on the new wool pads rupes made along with buff and shine wool pads and which one is the best one when is comes to finishing

MUC is really a great product. I just had an aluminum car carrier with 188 feet of tree branch scratches. Client loves Meguiar's products and always wants me to use them. MUC teamed with the Rupes Wool Polishing pads took out the scratches efficiently while not being too aggressive on the thin enamel paint.

DUDE. THANK YOU. Like seriously thank you. I’m what one would call an “amateur” detailer and your videos have helped me out alot. Especially this one

@autodetailingpodcast

5 жыл бұрын

Juan Beltran I appreciate that man - people like you is why I do these so thank you!

Great job, Thanks for the review. Was thinking about using ultimate compound to try and get out overspray. I have usrd black claybar on it and still see the haze of the overspray. Thank you.

@VertoxEffect

4 жыл бұрын

I may be mistaken but most black clay bars are heavily abrasive and will actually haze your paint like fine sandpaper which needs to be polished out.

Tried Meguiars. It did not taste like cinnamon at all.

@danlc95

4 жыл бұрын

Oh man, that Zymol Cleaner Wax made me want dessert a long time ago..

Using Mequiars Ultimate Compound, Polish, and Wax with a Chicago Pneumatic Platinum DA polisher, Lake Country backing pad, and Hex-Logic Buffing Pad Kit. Paid for itself with the first detail of my personal vehicle. Very pleased with the results and I did not spend an arm and a leg. Have a couple more cars to do and with the confidence these products induce, remove all hesitation for a do it yourselfer.

MEGUIARS works great on model car finishes as well. Tried some on Tamiya LP40 lacquer (Metallic Black ) with nice results. Clear coat afterwards for some depth. Just manually do it with Novus cloth and a light touch. Practice on some spoons first.

Ultimate compound surprised me many times in a good way.

@autodetailingpodcast

5 жыл бұрын

Agree

@CobaltFreak1990

3 жыл бұрын

It is definitely a product to keep on standby. It works well for an off the shelf product.

I love those dinosaur Porter Cables one of the best reliable machine in the market...I'm old school if its not broken why replace it...

@danlc95

3 жыл бұрын

Same here man! Somehow more torque than the xp version.

Thank you for the awesome video, I'm a professional detailer and I religiously use 3D. I have never use Maguires, I will probably give it a shot.

I always liked ultimate compound. I like the way it breaks down because it is a good indication when to quit.

I use meguiars compound and polish and I'm a professional detailer with my own business.

@staywoke1616

3 жыл бұрын

@@22conmanz22 it’s really easy to do it yourself, you’ll save 130 dollars

@NickVetter

3 жыл бұрын

@@staywoke1616 I'd charge around $400

@reza_dc2

3 жыл бұрын

@@NickVetter Hey Nick , I just did a small clear coat spot job on my car over the weekend. I got massive orange peel , going to cut it down wet sanding ( 1500 - 2000 ) etc.. Can I use 3D one to buff it out with a DA ; or would Meguirs UC be more effective for the job? Thanks

@supernova1976

3 жыл бұрын

@@reza_dc2 there is another video doing this exact job on a red Porsche search youtube you will find it under ultimate compound

@reza_dc2

3 жыл бұрын

@@supernova1976 Okay , thanks for the info I’ll check it out.

Thanks for the video brother, I looooove my Porter Cable and I love the haters who's never even tried it.

@danlc95

5 жыл бұрын

Man I started on a rotary. I have Rupes duetto and mini, a flex 3401... Guess which tool I use the most. The original PC 7424, like Jimbo is using. It's light, cheap, and reliable. I just picked another used one on ebay for under $50.00.

@2010stoof

5 жыл бұрын

I haven't tried the porter cable. But I do have a harbor freight and after I changed the grease it runs great. I have nicer models but nothing wrong with the "cheaper" models. Porter Cable is tried and true. Been around for years and before the explosion of polishers it was the one to have. Technique trumps machine most times. Sure long throws may work faster sometimes, but you can get great work done with the "cheaper" machines too.

@Jeppedy

5 жыл бұрын

I’ve used both HF and PC side by side, and actually prefer the additional power of the HF. The PC is quieter, and likely higher quality, maybe last longer. But for the lower price??? HF for the win!

@RB54DaBears

5 жыл бұрын

danlc95 thanks for sharing, I've never felt the need to ever buy something else when I get great results for my side job. I'm not a daily detailer but definitely a weekend one and at the end of the day, technique, pad choice, temperature, product, etc... All play a huge roll. I've always learned just pick one and master it. It does stall but not as much as my buddies Griots 6"

@RB54DaBears

5 жыл бұрын

2010stoof u hit the nail on the head with technique. I feel sorry for detailers who get sucked into the marketing hype of certain products and polishers. 2 years and over 40 cars later I've never had a dissatisfied customer. Thanks for sharing

Would be nice to know if this panel had a hard or soft clear coat on it for referrence. Nice vid! Thank you!

Can I use a regular polishing machine with with either of these compounds or will it leave swirls?

I'm working on a black Lamborghini that the paint was trashed. M105 worked well in removing the scratches but didn't finish down well as it normally does for me but the defects were gone. Tried m205 which worked okay but not good enough. Reached for my 3D One using a yellow Meguiars yellow polishing pad. Results were close to perfect.

love this guy.... he is trying to help, so if you think you know more..... why you watching this like me.... ??????????

Thx for the demo. I'm purchasing a new truck and want to know if I can just use the mcguires for routine polishing, is there anything else I can use to get the show room finish Thx Mike

DIY detailer used ultimate compound on my audi and the gfs bmw both dark paints, fantastic results even with some patches of deep marring. Found sticking to a 2 by 2 the best process so you can work it more and finish out with there ultimate polish 👍👍👍👍👍

@autodetailingpodcast

5 жыл бұрын

Yup it’s a good product for sure

I've used the meguiares ultimate compound many times and it does a fantastic job and polishes out nice. I don't like that it breaks down quick, it dusts and has a tendency to cake up on the pad. Long working time not only saves time, but it also saves on product. I've never used the 3d one product but I'm about to get some. I want something that cleans up easy and doesn't break down as quickly, and also polishes out well.

@100flite

Жыл бұрын

I've tried both. 3D One is the way to go.

@DownHillgamer

Жыл бұрын

I've got some 3d on the way, and a chemical guys torq polisher. Got a deal on it, $109 for a kit with their 2 step compound and polish that I might use on my mom's car cause I'm using the 3d on my truck since I don't have a ton of clear coat to play with and don't want to compound the clear away lol

@marcellemay7721

Жыл бұрын

@@DownHillgamer The 3D one, one step compound and polish works really well. If you don't need heavy correction, the one step works really well and you can get a car done fairly quickly. It's probably my favorite for rapid results and excellent results on a daily driver.

I didn't get a good chance to see the swirls I do see something but curious from this step would you go to a Polish or a cleaner wax? For perfect result 0 scratches? I tried the ultimate compound I was impressed what I got using the drill da but I couldn't get the final result I wanted due to contamination on the panel still or wrong pad or haven't tried a cleaner wax but using the Polish didn't seem to get anything better then the compound did.

Awesome video Jimbo. Being new to detailing I have had great results from the ultimate compound. After making a pass with my DA, I like being able to reference the pass markings from the compound and pad. I noticed that the 3D one creates less of a visual as the product is worked in. For me this visual reference helps me ensure I have good coverage and overlap. I am sure as I process with this passion, my opinions of products and how they apply may change. But for now…I have been satisfied with the results carried out from my basic 6” DA. Thanks for putting together this video that relates to the diy weekend warrior enthusiasts 🤙

@autodetailingpodcast

2 ай бұрын

Awesome! Glad you’re enjoying detailing it’s very rewarding.

I'm from the UK and been doing this for 20 odd yrs and we sometimes use 3M compound depending how tight our employers are lol I got my own buffer it's like 15 yrs old.the make is called SILVERLINE about £45 and it's a bog standard machine,big,heavy and awkward plus never had any of those velcro pads just the complete head that screws on.I got used to it and it did it's job and made great results. Depending on peoples experience and good quality compound plus if you want it 10/10 my SILVERLINE was ok.I had to buff and clean vehicles as quick as possible and chuck 'em out on the sales forecourt as that's what my boss wants...he got it....didn't do a 9/10 job only a 8/10 as to companies they want to "Shift metal" was their moto so i did what they asked lol I'd love to use those new machines!

@andrewfinley6846

4 жыл бұрын

TThe. ostantini

great review totally unbiased about both

Just finished with Mequiars Ultra cut 105. Removed swirls very well. However micro scratches are still there. Comments,suggestions. Oh,I used an orbital with orange pad. Thanks

I love these cheap vs expensive shootouts! Ultimate Compound is very easy and very effective compound to use. I have seen it do amazing stuff as well, when you throw it at certain applications . If you told me that all I could do is 1-step on a certain car, it would most likely be 1 of 5 compounds I choose. I know this compound probably better than I know any other. Very easy and forgiving, designed to just work for beginners. Great shootout! You picked two of my favorites!

Love ultimate compound very underrated

@autodetailingpodcast

5 жыл бұрын

Definitely is!

@themachine8009

5 жыл бұрын

Which one is better Meguiars ultimate compound or Meguiars 105? Thanks in advance

@Gnetbird

5 жыл бұрын

Yup, people paying a lot more for less quality and performance.

@Nics574

5 жыл бұрын

Why TF does megs have 50 different compounds I’m just trying to get started and have minor spiderweb on a 2 year old truck. No clue what pads to run what buffer or compound. The only thing that makes sense is 3M’s 123 steps with 123 pads

@thevaletmancornwall1907

5 жыл бұрын

I agree 100%! So underrated. I always get a class job using it! :)

Love this vid and the commentary. Had to like and subscribe for that sign off. We appreciate you man

@autodetailingpodcast

8 ай бұрын

Thanks!

I’ve been using UC and pair it with M205. Don’t underestimate the ultimate compound like he said, it can do serious damage lol I tried UC on 3000 grit before and I knew UC could take it out. Good stuff brotha 🤙🏻

@snail415

2 жыл бұрын

UC and 205 is a phenomenal combination. I’ve even used it on brass instruments!

U just earned a loyal sub you speak detailing gospel and your mind set is normal consumer help not detailer of Bugatti chirons

I'm a driveway DIY detailer. Set up a canopy and provide shade over the entire vehicle and when detailing I always use Meguiars ultimate compound. Works like a charm and it only cost about 15 bucks here where I am.

@andyt5411

2 жыл бұрын

Does it remove light to moderate swirl mark?

@Evadingmoto

10 ай бұрын

@@andyt5411yes

What is that stuff you spray after the buff and what happens if you dont do that?

did you pre-load the file? seemed like very little product to do 4-5 passes on an area that size.

Would you bother with one more step and use 5000 grit after 3000 grit (before the Meguiars Ultimate compound), or do you feel 3000 is sufficient as your last sandpaper grit? From the youtube vid, it looks like 3000 is sufficient, but without being there its a bit hard to tell. Thanks!!!

Incidentally, you are using my two favorites..

What would you recommend for apparent sun fading on a motorcycle, that i assume has color through ABS body work ?

in your opinion for a airbrusher guy on a budget is the ultimate compound a good go to product and what would you recommend as a final polish Thanks for the videos.

Hey Jimbo, great podcasts!! Thanks for doing product duels. I know meguiars is coming out with a new compound and polish. M110 & M210. Suppose to be incredible with even less dusting. Also I see they have a new spray coming out. Would love to see a video on these products, especially the ceramic spray. Thanks, keep the videos coming.

@autodetailingpodcast

5 жыл бұрын

Yes sir! I saw them all at SEMA and did a podcast about them, they said they will be sending them to me, so as soon as I get them I will be doing some videos on them.

Hey Jimbo!!! Hope you are keeping well. Whats the deal with forced rotation Flex machine 8 mm through, or 5.5 mm Makita ? Will it finnish perfectly fine with one step compound and no holograms every time / black / dark colours paintwork / both german and japanese paints or at least germans ? In hands of intermediate to advanced skilled da polisher person ? How much slower if at all forced rotation than 15 mm through da please ? Will forced rotation be safe working under sun paired up with scholl s 20 one step ?

I have it in my arsenal JB, one of my go too's is TLC by Jace Price. One of the reasons I love this product so much is one, It's very versatile, two finishes out very nice, three it was made by a detailer for detailer's. I gave it a slogan, smooth as butta, cuts like a knife. OGDetailer.

@autodetailingpodcast

5 жыл бұрын

Nice!

i just bought a DA 6inch and meguire 105 and 210. what kind of padding should i use for the compound and polishing step...i plan to sand with 1000grit then wet sand 1500grit. ill do a test panel to see if i need to sand to 2000 before the buffing. any suggestion on the cutting pad i need for the buff?

Weekend warrior. FG400 and TLC. Thanks for all your videos brother.

@autodetailingpodcast

5 жыл бұрын

Thanks for watching them!

I'm new in the ''da'' world but with my rotary tool (dewalt & yellow whool pad) i love using Ardex Product (alpha grit & 1500 plus) the alpha is a bit ''agressive'' but the grit melt by the time you polish with and work easy on 1000/1500/3000 sanding mark.... But here in Canada only the professional retailer can have those product 🤷🏻‍♂️

I love Ultimate Compound! Just found it at my local Menards for 8.98! I am well stocked!

@autodetailingpodcast

3 жыл бұрын

Score!

What ceramic coat would you prescribe?

you got a new subscriber man keep up the good work💪🏽

@autodetailingpodcast

Жыл бұрын

thanks

Does anybody know is the ultimate compound remove 1500grit sanding? As the hybrid one 3d

Jimbo, you tried Griots complete compound before? What is your thoughts?

@drewwilms6843

4 жыл бұрын

Just used it 1 step with orange pad on my own 2013 Durango. I was shocked very impressive. Very amusing bcuz it yielded great removal and finished out glossy at the same time🤘

Great comparison! UC is underrated.

@autodetailingpodcast

5 жыл бұрын

Definitely is

Been using a PC 7424 for the last 12 years. Still works like a champ!

👍🏻 for the average look correction. Not easy to notice, UC may need a second polish finish step for extra shine.

@imposter0shadow

5 жыл бұрын

Not really. I use ultimate compound and ultimate polish myself. Polished one panel twice and compared it to the panel i did once and there was no difference. Might not always be the case but haven't noticed any difference on the cars i do

I was very surprised using ult compound, along with ult polish, I don’t really buy any other compounds or polishes, I do send a little more on quality pads though 😎

I use Meguiars m105 most of the time for toughjobs but I still reach for Ultimate Compound for those that's not too bad but where a polish doesnt give me what I'm after. Little dusting Easy wipe off Easy to find. OTC

I use the PC and works well for me.

Great comparison

I more use 3M fast cut Plus. But the product you use works good as well

..absolutely nothing wrong with Porter Cable still use mine good as' any of my other's, cool demo video..✨☕

Thanks for the great chan! did you find the Megs D300 good for cutting moderate defects? i`m finding it really gentle not cutting much using microfibre cutting pad. Thanks for your time !

Great video bro . I think ether product would be a great cheap way to over deliver and give your clients a real wow factor.

Turth be told, eliminated 1000 grit scratches using 3D-ONE and a Lake Country yellow pad, all by hand. Granted, it took about 8 applications to get it done. Since then, I generally go as low as 3000 grit for the common swirls. It takes 1-2 applications to do the work.

Great video!! Sorry I'm a little late to this party, but do you think this process would work on older Imron paint? Thanks for your comments

So I just purchased a blk Chevy impala that has a lot of swirling Mark's, watermarks, and some imperfections. I took it to a shop who wants $700 to correct it. Do you think I can do the job myself or leave it to the professionals??

I had this old plastic orbital polisher that you fitted microfibre and wool bonnets to. Taking my time and knowing my machine and product, I did an as good job on my car panels as my mate that took his car to a pro detailer. Might have taken me a little longer cost me about 10% of his cost. Using a Rupes/Flex barely makes no diff if you're doing it for yourself

I always thought you was supposed to move slowly when u used a cutting compound.. Otherwise it doesn't worked very well?

Id love to see some imperial measurements like using a gloss meter & other things on each panel

@KWW0321

4 жыл бұрын

Empirical?

I'm looking for a good wax for my car, I'm going to clay bar it and wax, what is a good wax to use, not wanting to "cut" at all, just wanting a great shine and protect my paint

@autodetailingpodcast

5 жыл бұрын

It’s hard to beat the price and durability of meguiars fast finish

Have you tried a heavy cut pad on 1500 grid with this 2 Product?

@autodetailingpodcast

5 жыл бұрын

not yet

Liked your intro. Thumbs up for it

@autodetailingpodcast

5 жыл бұрын

Thanks

3d one is also the polish in one though. So you could leave to product on and chase it with the polishing pad.

its to entertain us!!! great video...!

For me there is a BIG difference. The 3D one cost more than 4 times the price of a Meguiars bottle. So for comparable results, I'll go with the Meguiar's.

@yourfather5324

2 жыл бұрын

I believe 3D one is better for mobile detailers as you CAN use this product in direct sunlight, ultimate compound you have to do it in the shade and a on a cool panel, so I believe 3D one is marketed more for the mobile detailers working outside

@roymurray2516

3 ай бұрын

3D one hands down

Good channel just found it. It good idea what your doing. Are people really hating on you for these tests. Detailing snobs are worse than craft beer snobs

@autodetailingpodcast

5 жыл бұрын

Thanks man - glad to have you along. Yup the hate is getting a bit better but it’s still there. Lots of “internet detailers”

I have a black decker polisher but I can’t use those fancy pads only bonets

Will this work on wet sanding marks?

Ultimate Compound is my go to compound. I live in South Carolina where the salt water kills your car paint.

@jonnymac8925

4 жыл бұрын

Amen! I live on the East coast of Canada. I live within 500ft of the Atlantic Ocean, so salt water and road salt are extremely prevelant in this area. A black car looks white by the end of Winter, but a clean car and some Mequiars and you are good to go! I am actually going to the garage in the next hour to detail my 2018 Harley Davidson 48 and hit the Vivid Black paint with some Mequiars compound!

Great comparison! Why did you sanded the hood with 3000 first? Should you always wet sand the car before polishing?

@snail415

2 жыл бұрын

The sanding was to ‘create a problem’ safely that demonstrated the compound’s performance. You could probably wet-sand clear with 2500-3000 a lot of times (if done uniformly) without real concern. Even with modern clearcoats that are thin. If you really wanna go down the rabbit hole, research clearcoat leveling and ‘orange peel’ removal. Some use denim pads to do this. Not for the faint of heart, but an everyday affair at paint shops in the early stages of paint correction. Just practice on a junk hood before tackling your daily driver. Trust me.

Great video! I’m hoping you can help me. I’m debating between applying Adam’s graphene kit to Ceramic Pro 9h + Top Coat (there is a $300 price difference).

@autodetailingpodcast

3 жыл бұрын

those are two very different products...depending on whats most important to you the 9h is going to give you much more durability.

Have you tried the Milwaukee polisher? I like it a lot personally

Thnks. Very helpful

Porter Cable 7424xp and the pre XP model are my all time favorite tools.

@autodetailingpodcast

2 ай бұрын

Tried and true machines!

I have both and l don't remember how much the Meguiar's cost but l recently bought a 16oz bottle of 3D One for $17 at my 3D retailer. Cheaper than Amazon.

I have a new car i just got. I dont have a da nor do i know how to use one yet. Is their a polish you can recomend to remove wax the dealer may have put on ? I plan to thoroughly wash. Decontaminate, then polish by hand to remove any wax, and swirls i may have added in the wash process. Then polish by habd to remove , and i have a bottle of prep to remove oils and residue from the polish, then after apply the Neguieres past wax graphene / ceramic coat. Any oroduct you can recomend. I guess i dont needvto compound, and since the car us bew dont want to remove ckear ciat. Just clean and enhance shin. Leave paint vurgin to accept my wax.

Ultimate compound 7$ and some change in my local Target

@charleschoo9398

4 жыл бұрын

Cost me 20$ at Indonesia'e Ace Hardware.

@jezzdogg6857

4 жыл бұрын

Cost me 37.. im in Australia.. figures..

@paulhall70

4 жыл бұрын

$10 at walmart and advance auto in kentucky usa

Jimbo, nice test. To be more fair to the Ultimate compound, you said it gave just as good of results as the 3D one but since 3D one is a Hybrid Cutting Compound & Finishing Polish, and Ultimate is just a compound, wouldn't you need to finish off the Ultimate side with their Ultimate polish too for more apples to apples comparison? I bet with the Ultimate Polish added, it probably looks better than the 3D one!

@laurapalmerTDGE

2 жыл бұрын

In fact the UP is a glaze. But you're right.

I am going put a coating on my almost new car that has really no scratches. Should I just polish the paint instead of compound?

@autodetailingpodcast

3 жыл бұрын

yup

I may have missed it, but could you tell me what speed setting you're using?

@autodetailingpodcast

3 жыл бұрын

usually 4-5